Related
Hello.
I'm trying to centralize all the EMMC issues in order to see if there's a common link. Feel free to post some details as well after you answer the poll.
There are 2 different common links
1) faulty emmc
2) idiots
rootSU said:
There are 2 different common links
1) faulty emmc
2) idiots
Click to expand...
Click to collapse
I'm trying to see if there's for example a given toolkit that would corrupt your emmc - could help the noobs who brick their phone after using who know what toolkit. We all know that no matter how many times we warn people , some will still use rootkits and AIO toolkits - best we can do is keep them away from the really damaging ones.
You'll never narrow it down.
rootSU said:
You'll never narrow it down.
Click to expand...
Click to collapse
In the last week we had 4 bricked EMMCs . Out of those there's
- unknown (http://forum.xda-developers.com/google-nexus-5/help/bootloop-nexus-5-problem-persist-t2962356 )
- Toolkit/Rootkit http://forum.xda-developers.com/goo...ed-nexus-5-t2522020/post51345473#post51345473
-Possible rootkit , TWRP 2.6.4.3 http://forum.xda-developers.com/google-nexus-5/help/nexus-5-32gb-mobile-internal-memory-t2969559
- unknown , http://forum.xda-developers.com/google-nexus-5/help/accidentally-bricked-nexus-t2967493
I'm pretty sure if we collect more data - maybe some logs and logcats as well we might be able to find out if there's a specific chain of events that will brick them , bad quality emmcs or just abuse .
Also , I want to see if the 16gb version is less prone to it than the 32gb. From what I dug in the forums it does seem so - though it might be only my subjective impression since I didn't centralize any data yet.
My point is, even if a user was using a toolkit at the time of nand failure, there is no way on earth you van categorically say that the failure was caused by the toolkit. Yes, people shouldn't use toolkits as they don't know what they're doing, but also let's not also attribute faulty hardware, stupid people or just bad luck to toolkits too.
I'm sorry, but this thread won't help anyone.
My problem with emmc brick started when lg sent me back the phone that is still broken.
Before this, my device was only in bootloop at the google logo.
nexus 5 emmc chip problem
I baught a new nexus 5 after upgrading to lollipop Automatically its gone dead but when i downgrade to kit kat mobile was on but not upgrading to lollipop and imei was unknown ,baseband unknown and storage was corrupt and nothing is working only wifi is working
I show this to software guys but they are saying that the emmc chip Is not working is their any solution for it
Need help please
Flash stock cache image
rootSU said:
Flash stock cache image
Click to expand...
Click to collapse
How ? Im a newbie i really don't know about this please guide me
faizanfarooq86 said:
How ? Im a newbie i really don't know about this please guide me
Click to expand...
Click to collapse
Take a look at his signature.
faizanfarooq86 said:
How ? Im a newbie i really don't know about this please guide me
Click to expand...
Click to collapse
Using fastboot. All guides and info threads are in general
faizanfarooq86 said:
How ? Im a newbie i really don't know about this please guide me
Click to expand...
Click to collapse
Download the factory image and extract it. In there is a zip, extract it too. in there you'll find the cache image
fastboot flash cache cache.img
See rootSU's sticky in the general forum and look for how to return to stock, flash a factory image
Sent from my Nexus 9 using XDA Free mobile app
i think that i had a nand faulty in the beginning but the phone show juste lg logo and bootloop and he can enter to recovery and download mode it was on 4.4.2 but i didn't know and i flashed a lollipop image with toolkit and the phone was dead totally no recovery no download not charging and not booting at all , juste QHSUSB_Bulk or modem driver and usb composite device , i tried lg flash tool , lgnpst , qpst , diagbord and nothing was working juste unknown device or unknown mode ,
someone tell me that is a nand faulty but i don't know how to fix that
sorry for my english , i am from Algeria and there is no LG service
sahouli31 said:
i think that i had a nand faulty in the beginning but the phone show juste lg logo and bootloop and he can enter to recovery and download mode it was on 4.4.2 but i didn't know and i flashed a lollipop image with toolkit and the phone was dead totally no recovery no download not charging and not booting at all , juste QHSUSB_Bulk or modem driver and usb composite device , i tried lg flash tool , lgnpst , qpst , diagbord and nothing was working juste unknown device or unknown mode ,
someone tell me that is a nand faulty but i don't know how to fix that
sorry for my english , i am from Algeria and there is no LG service
Click to expand...
Click to collapse
I think that's a different issue.. I know @bitdomo wanted to test something on nexus 5 in that state
rootSU said:
I think that's a different issue.. I know @bitdomo wanted to test something on nexus 5 in that state
Click to expand...
Click to collapse
i know but it's missing for long , i am waiting for him for so long , i hope so he will be fine
jd1639 said:
Download the factory image and extract it. In there is a zip, extract it too. in there you'll find the cache image
fastboot flash cache cache.img
See rootSU's sticky in the general forum and look for how to return to stock, flash a factory image
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
But for this i think i need to put my phone on fastboot but their is no fastboot in my device now what Should i do only 4 options are coming on pressing volume down + power
Start, restart bootloader, recovery mode and power off
Is their any guy who can help me in step by step guidance
faizanfarooq86 said:
But for this i think i need to put my phone on fastboot but their is no fastboot in my device now what Should i do only 4 options are coming on pressing volume down + power
Start, restart bootloader, recovery mode and power off
Is their any guy who can help me in step by step guidance
Click to expand...
Click to collapse
Fastboot is done from the bootloader itself, it is not a menu option. Step by step guides are in general > sticky roll-up
im really stuck in the start of adb and fastboot is their any guy to whom should i show my nexus 5 imei gone. storage corrupt and baseband null even camera is also not working.
i live in pakistan please prefer a guy who can resolve my problem
is there any way to recover emmc fault?
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
I have the same problem, did you find a solution?
cheers
Hi
I'm in the same situation, someone has a solution
Help
Me 2.
Help pls.
:crying:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Tali099 said:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
I'm the same situation that you.
gining said:
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
Click to expand...
Click to collapse
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
jjcc1999 said:
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
Click to expand...
Click to collapse
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
gining said:
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
Click to expand...
Click to collapse
I agree with you because the web does not put any warning that may happen or specification in this regard.
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
I have exactly the same situation after an official upgrade via SD card..
Black screen will not power on only shows blue light when connected to a charger or laptop.
I have been waiting for over two weeks now for ZTE to provide a solution, nothing, all I get is we are looking into it..
Terrible service and certainly won't be buying any ZTE again
Guys so we are really dead, there is nothing to be done about this problem ? Is this hard-brick ? Any solution here ????
same here
my phone brick after repartition this dump phone
i forget to search that file first..
Please help me s6 was brick [email protected]
reply from ZTE
Hello,
I have been backwards and forwards with ZTE to get this problem resoved and still not sorted. They did send me some instructions of how to reset the device but it needs a piece of software to be able to do this and ZTE won't give it to me to try it out!!!!
I would upload it on here but it seems I am not allowed to or cannot find out how to do it.
This is so frustating!
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
magicfab38 said:
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
Click to expand...
Click to collapse
You can enter recovery mode Power On pressing volume up key.
Try "wipe cache partion" at first and if S6 still doesn't boot up, try next "wipe data/factory reset".
If both measures doesn't work, your system has damage from unknown reason.What change did you it?
I have the same problem
:crying:
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
Did you find a solution ?
---------- Post added at 07:32 PM ---------- Previous post was at 07:17 PM ----------
safderali5 said:
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Click to expand...
Click to collapse
Hi bro did you find a solution to unbrick the zte blade s6 ?
Hello. I have a smartphone lg ms631 . kdz wrong with the firmware file and now will not turn on. When you connect the computer to the smartphone download mod shows only qualcomm HS-USB QDloader 9008 (COM16)
can someone help programmers restore this state ? I know that we need the bootloader files , but I do not understand programming , can someone from the firmware can somehow get or share advice who know this
You need BoardDiag
someone can make me a copy of the phone LG MS631 program Raw copy tool may well be restore phone? I will be grateful
any resolution?
LG MS631 Super Brick 9008
HI Everyone
Has anybody came up with the method to get the MS631 out of 9008 ...I have searched and search with only ending up with only some of the pieces to the puzzle ...two months researching
Can anyone help me with the correct LG programmer files for Qualcomm MSM8916 or 8x26 ...Apparently they are device specific and signed
Any help greatly appreciated
I just wanna know... Does anyone have a definitive answer? Is this fixable? Or am I wasting my time?
If more details are necessary please let me know and I'll get everything I know ASAP.
Long story short, got distracted while unlocking after a successful 6.0 upgrade and I'm not sure what happened. I decided panic was my best course of action and tried to install the original 5.1.1. That's when I got in the qsb qloader 9008 (not exact but something like that) mode where it doesn't turn on, no recovery, no download mode, doesn't show up as a drive on my pic and won't even charge a battery. To me, it appears as though it's completely wiped clean. Dead (but honestly IDK).
I've read and read and read for weeks. About using a small pin to short (force) it into download mode, about something called boarddiag, and a lotta code about partitions I do not quite yet understand.
I thought I read that these were unbrickable but I see there's a lot of people with this problem but only fague and incomplete answers scattered on almost every forum I've read.
I'm not a noob, but this is noob to me. Please help and share your experiences.
Hello,
Hello, you can try this way.
https://forum.xda-developers.com/tmobile-g4/general/lg-g4-h811-complete-unbrick-guide-100-t3461629
I have same problem on LG G4 Stylo MS631, I try with SD card (64GB) which wrote system.img.
My computer recognize phone LGE Android port (COM 41).
Then I try with LGUP, but LGUP unknown it.
Anyone can help me !
Thanks a lot
I've heard something about a "boardiag" but still researching.
Hello guys
I have a bricked one too, trying to solve it
In unloock tool :
it said snapdragon 855(sm8150) when reading the SoC
But the firmware only have firehose sm7150
Is this an issue? Or it already included in sm7150?
Need someone help to unbrick the phone
Tried multible firmwares with different versions
EFT pro, Unlocktool, Xiaome tool, pro all these tools and even Qifil
Is it from SoC? Because its auto EDL mode without test point
I will provide pics soon
it was bricked during the UBL or software installation or it was just Dead while using the phone?
if it was dead while using the phone. then you need to reball the CPU.