Hello guys
I have a bricked one too, trying to solve it
In unloock tool :
it said snapdragon 855(sm8150) when reading the SoC
But the firmware only have firehose sm7150
Is this an issue? Or it already included in sm7150?
Need someone help to unbrick the phone
Tried multible firmwares with different versions
EFT pro, Unlocktool, Xiaome tool, pro all these tools and even Qifil
Is it from SoC? Because its auto EDL mode without test point
I will provide pics soon
it was bricked during the UBL or software installation or it was just Dead while using the phone?
if it was dead while using the phone. then you need to reball the CPU.
Related
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
NafeesTyagi said:
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
Click to expand...
Click to collapse
this might help u
http://forum.xda-developers.com/showthread.php?t=2459150&page=2
Help me in recovering the device.... using qpst tool.. just like karbonn a9+
i mean with MPRG8X25.hex and 8X25_msimage.mbn ,files to recover the phone
this might work
try going into recovery mode ... do a clean flash..
NafeesTyagi said:
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
Click to expand...
Click to collapse
The case was with me when I flashed android Honeycomb on it. I Hard-bricked it! ( Not even showing reaction when connected to charger ) ( nor booting )
I submitted my phone to Service centre and they said it would take at least 2 months. But I got my repaired phone on the 10th day!
For your problem the only best solution is Service center...
You can get firmware version and download tools from this website http://support.moulnisky.com/index.php?dir=Karbonn/S5_Titanium/
i changed my phone
but thanx manav113
Bad luck I presume..
Sent from my A15 using XDA Premium 4 mobile app
Titanium S1
NafeesTyagi said:
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
Click to expand...
Click to collapse
Hey you said that u found some tool for karbonn s1, can u tell us what is this tool? I know a tool called Acronis True Image but it requires backup image of the sys_boot partition. That means someone who has working S1/S5 has to take back up of recovery partition(sector by sector) using Acronis True Image and upload it here on xda or somewhere else and we can use that back up with the same tool. Please let me know if u have solution
Ya!
my karbonn smartphone was only responding to qpst tool (qualcomm products supporting tool)
I encountered with it while I was googling to revive my hard brick phone.
even phone was neither charging nor booting but responding to qpst.
If you want qpst tool I can send you by mail
But I don't have any backup of firmware files.
I think you should talk to zeyaan or deepa2119 they may help you probably they have back up
NafeesTyagi said:
Ya!
my karbonn smartphone was only responding to qpst tool (qualcomm products supporting tool)
I encountered with it while I was googling to revive my hard brick phone.
even phone was neither charging nor booting but responding to qpst.
If you want qpst tool I can send you by mail
But I don't have any backup of firmware files.
I think you should talk to zeyaan or deepa2119 they may help you probably they have back up
Click to expand...
Click to collapse
HeyI have the 2.7 build 411 but my phone (LG G3 Qualcomm 400 MSM8926) doesnt appear on the selection menu or is detected by the program. Would you have a newer version?
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
I have the same problem, did you find a solution?
cheers
Hi
I'm in the same situation, someone has a solution
Help
Me 2.
Help pls.
:crying:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Tali099 said:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
I'm the same situation that you.
gining said:
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
Click to expand...
Click to collapse
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
jjcc1999 said:
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
Click to expand...
Click to collapse
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
gining said:
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
Click to expand...
Click to collapse
I agree with you because the web does not put any warning that may happen or specification in this regard.
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
I have exactly the same situation after an official upgrade via SD card..
Black screen will not power on only shows blue light when connected to a charger or laptop.
I have been waiting for over two weeks now for ZTE to provide a solution, nothing, all I get is we are looking into it..
Terrible service and certainly won't be buying any ZTE again
Guys so we are really dead, there is nothing to be done about this problem ? Is this hard-brick ? Any solution here ????
same here
my phone brick after repartition this dump phone
i forget to search that file first..
Please help me s6 was brick [email protected]
reply from ZTE
Hello,
I have been backwards and forwards with ZTE to get this problem resoved and still not sorted. They did send me some instructions of how to reset the device but it needs a piece of software to be able to do this and ZTE won't give it to me to try it out!!!!
I would upload it on here but it seems I am not allowed to or cannot find out how to do it.
This is so frustating!
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
magicfab38 said:
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
Click to expand...
Click to collapse
You can enter recovery mode Power On pressing volume up key.
Try "wipe cache partion" at first and if S6 still doesn't boot up, try next "wipe data/factory reset".
If both measures doesn't work, your system has damage from unknown reason.What change did you it?
I have the same problem
:crying:
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
Did you find a solution ?
---------- Post added at 07:32 PM ---------- Previous post was at 07:17 PM ----------
safderali5 said:
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Click to expand...
Click to collapse
Hi bro did you find a solution to unbrick the zte blade s6 ?
Hello Guys,
I have a Huawei Ascend G730 (Model: HUAWEI G730-U10). No boot, No power up, No nothing, but when plugged in a computer, the computer detects it. It detects it as an MTK Device.
I tried flashing it with SP FLASH Tools (I used at least 5 roms), all failed. It's an SP FLASH Error (“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) ).
I tried searching for results on the interwebs but to no avail.
I also saw this (https://forum.xda-developers.com/general/xda-assist/brom-error-sftenabledramfail-0xfc0-sp-t3378499). But that guy was met with a stock answer.
If anyone knows. Pls do help.
Thanks in Advance.
MujinFaye said:
Hello Guys,
I have a Huawei Ascend G730 (Model: HUAWEI G730-U10). No boot, No power up, No nothing, but when plugged in a computer, the computer detects it. It detects it as an MTK Device.
I tried flashing it with SP FLASH Tools (I used at least 5 roms), all failed. It's an SP FLASH Error (“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) ).
I tried searching for results on the interwebs but to no avail.
I also saw this (https://forum.xda-developers.com/general/xda-assist/brom-error-sftenabledramfail-0xfc0-sp-t3378499). But that guy was met with a stock answer.
If anyone knows. Pls do help.
Thanks in Advance.
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately I can not find any answers to your problem but several users who have had this issue with mtk devices. It does sound like your memory chip has failed unfortunately but I do hope I'm wrong
Good Luck
Sawdoctor
Ok, i have a doogee x5 pro phone and i tried to root it by flashing twrp recovery using sp flash tools. While flashing i got the error "PMT Changed for the rom it must be download". So i did a small research on internet and i found out that i needed to format everything except bootloader. This succeded. So after that i tried to install the firmware with this succeding to. Unfortunately the time i tried to turn phone on it was dead. SP Flash Tools wont detect it anymore. Please help me cause the phone is not mine and its brand new! I can rate my self as moderate android user. :crying:
i think i have a bigger problem... I downloaded a stock rom for doogee max pro(cause i just realised it wasnt just pro it was max pro) and it didnt seem to be recognised again. Any help would be appreciated. I constantly keep trying to raise it from the deads. Thanks!
Ap0s said:
i think i have a bigger problem... I downloaded a stock rom for doogee max pro(cause i just realised it wasnt just pro it was max pro) and it didnt seem to be recognised again. Any help would be appreciated. I constantly keep trying to raise it from the deads. Thanks!
Click to expand...
Click to collapse
On mtk devices a preloader is independently installed, it should be almost impossible to destroy, I owned a x5 pro and had best success to flash it with sp flash by taking out the battery, press flash button and plug it in...
The second huge issue I see is when you used the specific flash tool format option you very, very likely killed the nvram partition which contained the imei, so you'll have to fix this too by generating a new one and using mtk engineer mode which is well described and to find on Google..
But let's go step by step. Check without battery, or if it's a non replaceable you'll need find the reset button..
i have tried before without battery and i tried just now but nothing. Its very weird it was detected before and now no in same and another machine. I am pretty confused and stressed. Hope i didnt do any physical damage.. :crying:. THANKS!
starting to get pretty stressed omg! and is there a difference between MT6737M and MT6737?
i came to the point im starting to lose my mind... tried everything i could, i have 5 days left to repair this phone and i dont wanna pay 85 euros for this. SP Flash Tools wont detect the phone. Tried almost 5 different scatter files,2 different PCs and different mtk drivers. Im losing my mind already
UPDATE: I almost fixed it! I had flashed wrong preloader so phone wasn't recognized by SP Flash Tool. I fixed preloaded with a little trick from here: link. After that i flashed stock rom downloaded from doogee.cc but phone will not boot resulting in a total black screen. When i hot Power + Vol Up it takes me to another screen:
Select Boot Mode:
Recovery
Bootloader
Normal
Doesn't matter which boot mode i choose i just get a total black screen which means i get nothing. Idk what is happening! Any further help would be appreciated! I constantly try to bring it back working with little success and small improvements.
Last UPDATE: FIXED my phone had no juice left inside so couldnt complete boot proccess. Now its all good running Btw someone must pin this META trick link i send on my previous post cause im sure more people out there have preloader issues!!! Thank you everyone!!
Sam Nakamura said:
On mtk devices a preloader is independently installed, it should be almost impossible to destroy, I owned a x5 pro and had best success to flash it with sp flash by taking out the battery, press flash button and plug it in...
The second huge issue I see is when you used the specific flash tool format option you very, very likely killed the nvram partition which contained the imei, so you'll have to fix this too by generating a new one and using mtk engineer mode which is well described and to find on Google..
But let's go step by step. Check without battery, or if it's a non replaceable you'll need find the reset button..
Click to expand...
Click to collapse
And yes i couldnt flash it with battery only with!
I don't know what I was doing although I know but my brand new OnePlus 6 avenger edition got softbrick or hardbrick I don't know
All I know is my phone is now stucked on bootloader it loops it into again and again
And for god sakes someone told me that if I lock my bootloader back then I can revive my phone but it made it worst
Now the only way to revive my phone is through msm hardbrick tool I think so
But here's a problem I installed Qualcomm driver and turned my laptop (windows 7) into testing mode
Now I tried to unbrick it through msm tool it shows that the device is connected then it shows start download firehose binary but it shows failed after 16s of starting the process it shows something about saraha communications failed
How can I revive my phone
Please help me !!!!!
Got solved!!!
Hi there, I have the same problem. May I know how did you solve it?