Is it me or is the fingerprint implementation a little lacking?
First when phone is powered on it won't let you use your fingerprint and requires the less secure Pin to access the device the first time which I find retarded
My second biggest issue is seems rotation isn't taken into consideration for fingerprints.
What I mean by this is if you setup your print and your finger was vertical if you try to scan your print later but your finger is horizontal it won't take it
I mean it's the same print so the device should be able to recognize it 360 degrees.
Some may argue that a print horizontal and vertical are technically not the same print which is true but I argue it's IMPOSSIBLE for a fingerprint to match someone else's just because of rotation.
My fingerprint at 45 degrees will neveratch stone else's at any degree. So rotation should be considered
My work around is to setup all 4 possible stored fingerprints. 2 for each thumb and each have 1 vertical and one horizontal
Maybe I'm being silly but stil bothers me
Maybe you got a defective unit. My fingerprints work 360 degrees.
lvnatic said:
Maybe you got a defective unit. My fingerprints work 360 degrees.
Click to expand...
Click to collapse
I tested different roms other than stock and same issue
Not sure how hardware could be at fault if it works if I program the fingerprint.
Do you have the PIN thing at boot?
fidorulz said:
I tested different roms other than stock and same issue
Not sure how hardware could be at fault if it works if I program the fingerprint.
Do you have the PIN thing at boot?
Click to expand...
Click to collapse
Every device asks for the pin/pattern/password on first boot, it's the same on Apple products. As for the fingerprint, I can hold my phone upside down and it will recognise it.
lvnatic said:
Every device asks for the pin/pattern/password on first boot, it's the same on Apple products. As for the fingerprint, I can hold my phone upside down and it will recognise it.
Click to expand...
Click to collapse
I dont get why a device would ask for a less secure mode of authentication when a more secure one is programmed
thanks for your info
fidorulz said:
I dont get why a device would ask for a less secure mode of authentication when a more secure one is programmed
thanks for your info
Click to expand...
Click to collapse
A fingerprint is not cryptographically secure and it's much easier to "crack". For example you get arrested and the police wants to search into your phone. There are many countries where the police doesn't need a warant to do this, they can just force you to put your finger on the scanner. This goes for thieves too, they can use force to unlock your phone. So a password or pin is technically more secure.
Edit: another big reason for this are the unfortunate events when someone can lose their hand or fingers. The only way you could unlock the phone this way is to hard restart it and use the backup password.
And it's not a very big deal, I doubt you restart your phone every few minutes. Mine for example has 5 days uptime at the moment.
U can assign your prints many times from different angles. As for having to enter the password from reboot yeah I found that less secured. My solution on mine s7 edge is having password lock on the SIM card so there's a double lock when ever my phone got a reboot.
I have registered two thumbs and two index fingers and the fingerprint scanner accepts them even if I scan them up-side down, so there might be something funky going on with yours. Delete your current prints and do it again. This time, don't just press the scanner in the same area, but move your finger so it gets your whole thumb, and also rotate your finger a bit while it scans.
I just rotated my fingers a bit between scans. Problem solved.
Sent from my SM-G935P using Tapatalk
A read a few years ago that some hackers got into the iPhone when fingerprint was enabled. They could only get through the first lockscreen right after boot. I THINK that is the reason for the pin, as that is way more secure.
Yep, it does work on all angles. But you should do more than one fingerprint profile, even for the same finger. When creating a profile, you need to move your thumb around to cover the whole area of your thumb, otherwise you won't capture enough for it to work on all angles.
1. Requiring a pin or password after boot is an additional security feature. How often do you power down your phone and then start it up again?
2. If you rotate your finger while setting up the password, the phone will recognize it rotated later.
J.Biden said:
I have registered two thumbs and two index fingers and the fingerprint scanner accepts them even if I scan them up-side down, so there might be something funky going on with yours. Delete your current prints and do it again. This time, don't just press the scanner in the same area, but move your finger so it gets your whole thumb, and also rotate your finger a bit while it scans.
Click to expand...
Click to collapse
In my experience, two of the same finger will drastically mess things up. Unlike the iphone, where it helps. Try with just one of each finger.
I agree with the OP on the Fingerprint, But for me its not a issue.
All i done, was go into the finger print and added my same finger multiple times from every angle.
The Rotation of the finger was a issue ONLY when i setup my thumb holding the device properly.
I think it has more to do with the overall % of the Thumb area it was able to capture.
So rotating 90 or 180 may miss off 25% of your original scanned thumb, making it incomplete.
I added my same unlock fingers about 3 times, one of them uses just the edges of thumbs, the other uses the Flat part and Top
the over uses Flat part and bottom.
So when i press with my Thumb, it recognises my Half-pressed Thumb print, or even just the top segment.
The Eneter your Pin on Reboot is stupid, But would not suprise me if there is a Mod to alter this behaviour.
It was adapted from Apple i think, when they don't the first fingerprint release you had to do the same on apple on first reboot.
(It seems more secure on the fact if your drunk and unconcise someone can turn your phone on and access it with your hand)
A good password before allowing the fingerprint scanner on a restart is a security option to encrypt the storage. A fingerprint isn't that secure as you think. It was recently been proofed vulnerable simple by taking the fingerprint (eg. the fat film on the touch display) and print it. You just have to use magnetic ink.
http://hackaday.com/2016/03/11/finger-print-scanners-really-arent-that-secure/
http://gizmodo.com/how-to-easily-hack-a-smartphone-with-an-inkjet-printer-1763261331
Much more secure would be a vein detection fingerprint scanner. Besides the fingerprint itself it detects the individual vein structure and flow what 1. isn't noticeable from the outside 2. needs you to be present (and alive)
BUT as said before: Different countries police is able to force you to give your fingerprint - This would be an issue if there wasn't an option to ask for the password (and pin) before encrypting the device on startup. The only what you have to be trustful is the phone manufacturers firmware. The strongest password is nothing, if the manufacturer failed with firmware.
This is indeed only just theoretical, because most people for sure haven't that much of a interesting contend on their phones.
fidorulz said:
Is it me or is the fingerprint implementation a little lacking?
First when phone is powered on it won't let you use your fingerprint and requires the less secure Pin to access the device the first time which I find retarded
My second biggest issue is seems rotation isn't taken into consideration for fingerprints.
What I mean by this is if you setup your print and your finger was vertical if you try to scan your print later but your finger is horizontal it won't take it
I mean it's the same print so the device should be able to recognize it 360 degrees.
Some may argue that a print horizontal and vertical are technically not the same print which is true but I argue it's IMPOSSIBLE for a fingerprint to match someone else's just because of rotation.
My fingerprint at 45 degrees will neveratch stone else's at any degree. So rotation should be considered
My work around is to setup all 4 possible stored fingerprints. 2 for each thumb and each have 1 vertical and one horizontal
Maybe I'm being silly but stil bothers me
Click to expand...
Click to collapse
I find the fingerprint scanner to be completely rubbish with my thumb and ok with my index finger. I even programmed all four on the same thumb, all with the phone being held in the right hand, and must have "scanned" every part of my right thumb from several similar angles, so there is no excuse for it not getting it right every time, and yet, I would constantly be timed out 29 secs 59 secs, 5 minutes... VERY VERY annoying. So it seems my right thumb isn't samsung fingerprint scanner friendly (it's not like I do a lot of diy or wanking or something!!) Index finger is ok, but then it is not friendly to use as I have to hold the phone in my left hand to then scan my right index. I suppose I could use my left index but the point is I cannot use my S7e fingerprint scanner with one hand as the thumb does not work.
A simple way to overcome the fingerprint
would be to inbuild a temperature control and only accept a fingerprint at the provided with a temperature of: 37 degrees Celsius
Again its still possible to overcome, It just starts getting expensive to be able to do so.
(Anything can be overcome, its just about how much time and money one may have)
dave7802 said:
A simple way to overcome the fingerprint
would be to inbuild a temperature control and only accept a fingerprint at the provided with a temperature of: 37 degrees Celsius
Again its still possible to overcome, It just starts getting expensive to be able to do so.
(Anything can be overcome, its just about how much time and money one may have)
Click to expand...
Click to collapse
But what If I have the flu? What if I've been in the sun for a while, and the surface temperature of my skin is above 37 degrees? What happens during winter when it's the opposite?
Back to the lab I guess!
J.Biden said:
But what If I have the flu? What if I've been in the sun for a while, and the surface temperature of my skin is above 37 degrees? What happens during winter when it's the opposite?
Back to the lab I guess!
Click to expand...
Click to collapse
Actually would not think so, With some clever coding or even using the latest AI's
You could implement something easy enough.
Using something like current GPS and Weather to understand the conditions it may be faced with.
Understand when your ill your Temp does go up and down, but not a great deal and it would not be hard to implement the differences in the temperature control.
To be able to tell the difference between a human temperature and Synthetic, based on how quick the temperature is reached, how its maintained and pressure sensitivity
All your doing is adding a layer of security of Magnetic printers.
So instead of it costing around 500-1000 to bypass a fingerprint reader, its going to increase that by alot.
Making it less affordable for your average Joe.
dave7802 said:
Actually would not think so, With some clever coding or even using the latest AI's
You could implement something easy enough.
Using something like current GPS and Weather to understand the conditions it may be faced with.
Understand when your ill your Temp does go up and down, but not a great deal and it would not be hard to implement the differences in the temperature control.
To be able to tell the difference between a human temperature and Synthetic, based on how quick the temperature is reached, how its maintained and pressure sensitivity
All your doing is adding a layer of security of Magnetic printers.
So instead of it costing around 500-1000 to bypass a fingerprint reader, its going to increase that by alot.
Making it less affordable for your average Joe.
Click to expand...
Click to collapse
Hahah, yeah so this is making a thing that's not that complicated, extremely complicated. The current fingerprint readers are secure enough (for now), so no reason to go overboard here :laugh:
Also, temperature is not a constant. It changes all the time, so temperature reading is absolutely not the way to go. Fingers, eyes, ears and toes are mathematically unique, in the way they're one of a kind on each person, and can't easily be faked. Temperature is so incredibly random that it would never work.
A reader that includes a capacitive surface that rely on the electrical properties of the human body to detect if it's human (like a regular touchscreen), is easier. That way, it needs to be a finger touching, and not a piece of rubber or paper. Maybe it's already in place, I don't know, and I haven't tried to unlock any devices using paper or anything.
Face unlock currently requires a double tap, which is annoying because it doesn't work half the time
Even though they are trying to fix this in the next update, a better implementation would be when you raise the phone, it shows the lock screen (not ambient display screen), and simultaneously turns on the front camera to face unlock your phone
Gravity screen can do this, but requires a heavy wakelock to do so. Using the same 'raise to wake' method as ambient display [which seems to work without a heavy wakelock], but then showing the lock screen instead of ambient display, should achieve this
I would LOVE this feature, it would be a complete game changer!!
I use gravity screen and don't lose much battery
Use the power button since it's more reliable anyways ?
Bradl79 said:
I use gravity screen and don't lose much battery
Click to expand...
Click to collapse
There's still a fair amount of battery loss. Oneplus raise to wake seems to be able to do the same action without any battery loss
This was so fine on Op5 and 5T. Open Beta, of course!
Update: I've installed the wave up app. It basically wakes the phone when proximity sensor is uncovered
So when I take the phone out of my pocket, it authenticates my face automatically and unlocks, in a split second. I don't need to touch anything
Similarly if I keep my phone face down on a desk (not ideal), when I flip it over to look at it, it unlocks.
No messing around with d2tw which is more like quadruple tap to wake since this functionality is broken
3473 said:
Update: I've installed the wave up app. It basically wakes the phone when proximity sensor is uncovered
So when I take the phone out of my pocket, it authenticates my face automatically and unlocks, in a split second. I don't need to touch anything
Similarly if I keep my phone face down on a desk (not ideal), when I flip it over to look at it, it unlocks.
No messing around with d2tw which is more like quadruple tap to wake since this functionality is broken
Click to expand...
Click to collapse
Hi i use the original flip case from OP and as soon as i open my case door it unlocks witch is very easy and convenient.
Shall check with tasker.
Update: could not succeed.
I face no trouble in dt2w it wakes as it's intended to and unlocks with face within a split second, face unlock has become slower since the 5.1.9 and in dp3 but still fast enough
If my hand is dirty i just say Hey or Ok google.
Agree. it would be a great thing
Apparently this is a fairly common issue with the Samsung Galaxy S10 range and after doing some simple tests I'm hoping my insight can help.
The first test I did was to dial *#77692# to access the proximity sensor test menu. While I was on this menu I covered the sensor with my hand and got a proximity reading of 1.0 everytime the sensor was covered and 0 when it wasn't, which to me suggests that the sensor is working fine.
the second test involved ringing up my voicemail and basically doing the same thing, now here is where it gets interesting; if I cover the sensor for a few seconds and then lift my hand the screen stays turned off. But if I then recover the sensor an inconsistent number of times (sometimes once, sometimes a bunch of times) it'll turn the screen back on.
Additional: I also tested this on Skype and the behaviour was identical.
To me it looks like the issue is purely on a software level rather than a hardware level as this only seems to happen during phone and Voip calls, but not during tests.
Now I'm not a developer so I can't begin to understand how this issue could be fixed, but I'm hoping my little tests can help matters along.
Had the Problem also, fixed it by rebooting into recovery and wipe cache partition.
Same issue here..
I have had S10e, but i sold because of this issue.. now i want to buy it again, but i don't know if exists an S10E series without the proximity sensor issue.. anyone with ans S10E without this bug? (just try to hear a whatsapp audio near the ear)
Hi,
This is strange that my old S8 allowed 5 fingerprints to be stored but the Note 10 lite allows only 3. Is it a limitation or can it be bypassed? If yes, how?
You can add 4 fingers at once. Just keep switching fingers and keep rotating the phone while registering your impression (For instance, one time you use thumb, rotate your phone 90 degrees and register your index finger and so on). This way, you can both the thumbs and both the index fingers registered under just one profile. This helps the fingerprint scan become faster, while also leaving 2 free slots to register someone else's fingerprints or add your own for increased accuracy.
Can someone confirm that this is present on yours X5III? Wondering if this is by design or some fault.
I'm using barometer to log an altitude of my trips..
->
Open app showing barometer data (preferably Phyphox), run pressure test.
Tapping or making pressure to middle part of the display makes pressure go peaking high and low. Like this:
Probably normal, you're changing the internal pressure when you do that.
Means the watertight seal still intact.
Fun fact: this water-tight seal, plus a barometric sensor, has been used by apps to simulate features like the side squeeze Pixels had from series 2 thru 3a.
I tried the same thing on my old X Compact and it does the same thing. Only the sensor on XC has a lot slower readout so it does not show so rapidly and sometimes it smooth it out. Well, need to be more soft on tapping while also recording altitude with barometet ) thx for replies