Linked below is the Stock Factory Image for the MediaPad M5 8.4" WiFi China Variant.
SHT-W09 - Schubert W09 / W09A 8.4" MediaPad M5 WiFi
C00 - China Region
8.0.0.128 - Version
https://www.androidfilehost.com/?fid=3700668719832240475
This will get your device back to 100% stock.
Please note, I do not have this China variant, but I would assume the install instructions are the same as the US version. Once extracting the zip, review the document ReleaseDoc\SHT Software Upgrade Guideline.doc for install instructions, but for the US version it was as simple as:
Extract the zip file
Copy the dload folder from Software\ into the root of a formatted Micro SD Card (as is, do not extract any other zip files in dload)
Reboot into the EMUI Recovery (from a powered off state: press and hold the Vol+ and Vol-, then press Power)
Wait...
On the US device, I believe this kept the bootloader unlocked, but restored everything else including any custom recovery.
Related
hey guys. as the title says... I have a L29 Huawei Mate 8 ( origin Firmware B180, bootloader already unlocked)
i stuck at the stock menu which says you phone is unlocked and can't be trusted... I flashed several times TWRP 3.xx and try to unbrick B170 via Italian Knife. I feel so hopeless now. Did I brick it? i can enter Download mode pressing down power.. any ideas? Which page should I read again?
Leave me a message here or directly to my qq it is 1817364438.
Flashback to stock using "dload" put the update.app in dload folder in sdcard. Then hold the up+down volume +power.
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
mod edit - link removed.
The Infinix Mobility company have released it’s Nougat updates for almost all of it’s devices and the Android 7.0 Nougat firmware update comes in two ways which is installed via it’s OTA “over the air” updates or via the device scatter files which is been installed via it’s flashtool.. In this post, you will find the stock Android 7 Nougat firmware for the Infinix Zero 4 Plus X602. This firmware can be comfortably flashed via SP Flashtool, Miracle box, CM2 or any flashing software that flashes MediaTek devices firmware with scatter files.
Note:*This firmware is for the Infinix Zero 4 Plus and not for the Infinix Zero 4. You can download the Infinix Zero 4 stock firmware via this*mod edit - link removed
DOWNLOAD INFINIX ZERO 4 Plus NOUGAT STOCK FIRMWARE.
Before downloading the firmware, kindly make sure your device matches the specs below. To flash the firmware, follow this mod edit - link removedlink for*SP Flashtool tutorial.[/URL]
How To Install TF Card Update:
Reboot your phone into Recovery mode, just like we did back when we made our Nandroid backup.
Head to the “Install” or “Install ZIP from SD Card” section of your recovery.
Navigate to the ZIP file you downloaded earlier, and select it from the list to flash it.
Wait for the process to complete; it may take a few minutes.
Depending on your situation, you may also need to wipe your data and/or cache. In TWRP, you’ll find this under the “Wipe” section, and in ClockworkMod, you’ll need to either choose the “Wipe Data/Factory Reset” option or the “Wipe Cache Partition” option. When you’re done, you’re free to reboot into your new ROM.
Android Info:
Display ID: X602-H972AC-N-170518V29
Version: Android Nougat 7.0
Model: Infinix ZERO 4 Plus
Brand: Infinix
Device: X602
Manufacturer: Infinix
Firmware Download Link:
X602-H972AC-N-170518V29 –*Tf Card,*SP Flashtool
Much appreciated, any word on root availability yet?
can this phone be installed in pure android?
are there any custom roms for the x602 out there?
Hello, forgive my English but I write through a translator. I have a Honor 6 H60-L12 after unlocking the bootloader, root and custom recovery I could no longer flash any firmware. Helpme Please
Here is a way!!
Dload honor multi tool on PC, run it, enter honor 6 on multi tool, then put your phone into bootloader mode (vol down + power) and enter the following numbers for recovery (I think it's 1) and hit enter, then select the EMUI you had, e.g. like my phone honor 6 h60l04 with Android marshmallow, I would select number "3" and then enter because Android 6 has EMUI 4.0 and agree that you have your bloader unlocked, install one of the recoveries it shows. Then have a rom that's based on your previous stock android version e.g. Android 6 rom for my phone (KingVip worked best for me) and finally install it with your recovery, wiping your data then clicking install for best measures
Hope it works for you?
Linked below is the Stock Factory Image for the MediaPad M5 8.4" WiFi EU Variant.
SHT-W09 - Schubert W09 / W09A 8.4" MediaPad M5 WiFi
C432 - EU Region
8.0.0.163 - Version
https://www.androidfilehost.com/?fid=3700668719832240476
This will get your device back to 100% stock.
Please note, I do not have this EU variant, but I would assume the install instructions are the same as the US version. Once extracting the zip, review the document ReleaseDoc\SHT Software Upgrade Guideline.doc for install instructions, but for the US version it was as simple as:
Extract the zip file
Copy the dload folder from Software\ into the root of a formatted Micro SD Card (as is, do not extract any other zip files in dload)
Reboot into the EMUI Recovery (from a powered off state: press and hold the Vol+ and Vol-, then press Power)
Wait...
On the US device, I believe this kept the bootloader unlocked, but restored everything else including any custom recovery.
I posted here about a bricked M5. Tried your guide (thanks) but it fails after 20ish%. Any suggestions?
https://forum.xda-developers.com/me...ck-sht-w09-t3887413/post78634253#post78634253
Hello all !
I have a big issue on my Huawei Y9 2019. I updated the software version moving from EMUI 8.2.0 to EMUI 9.1 via HiSuite. The HiSuite downloaded then the new version and installed it. Once the update was complete, the phone rebooted.
The problem is that the phone does not boot correctly. It says that "Your device has loaded a different operating system" and immediatly goes to eRecovery where 4 options are available: Download latest version and recovery, Wipe data/factory reset, Reboot and Shutdown.
- I tried to select the 1st option but it goes to a "Getting package info failed".
- I tried then to Wipe data/factory reset and Wipe cache partition. Same result, eRecovery each boot.
So I decided to search for stock ROM available online and downloaded ROM on the internet:
- Huawei Y9 2019 JKM-LX1 JKM-L21 Jackman-L21 8.2.0.102(C185) Firmware 8.1.0 r1 EMUI8.2 05015JMY androidhost.ru
- Huawei Y9 2019 JKM-LX1 JKM-L21 Jackman-L21 8.2.0.102(C185) Firmware 8.1.0 r1 EMUI8.2 05015JMY
- Jackman-L21 8.2.0.130(C185)_Firmware_8.1.0_r1_EMUI8.2_05015JMY BY BLOG.GSM-SOCIAL.COM
Tried the mode download, create a dload folder and put the update.app inside the root folder of an SDcard (Vol up + down + power) but none of them works. It says that "Software install failed. Incompatibilty with the current version. Download the correct update package.''.
I'm really lost, I don't know what to do, these are the only ROMs available for JKM-LX1. What should I do please.
Thank you for you help ^^
Try Fastboot
Never heard of this phone.
Common problem with Huawei, try to flash stock rom that you had on phone when you have buy it. Be careful on version and region and if it is Cxxx or CxxxCUST.
Try to update HiSuite and try again. Do you have Y9 2019 (JKM-L01, LX1, L03) or Y9 Prime 2019 (JKM-L21) ? See on backside of phone, on bottom.
If you have unlocked bootloader, you can some custom rom. Do you have custom recovery (TWRP)?
Or you can use right rom with pro-teammt.ru, creators of Firmware Finder for Huawei/Honor. Like there.
You will need to use eRecovery and change DNS to redirect phone to use pro-team site in stead of official.
Or try multirom tool to unbrick phone / repair rom. https://pro-teammt.ru/en/multi-tool-huawei-honor/
Hi My huawei y9 update to 9.1 andriod emui was done and when i installed it it said that picture info missing and entered erecovery mode. Now i have 5 option one is download latest version and second is emergency backup, third is factory data reset and 4 is reboot, and 5 is shut down, Nothing is happening on reebot it get back to e recovery itself again in download latest version and recovery mode it says that download failed packages are missing. Help me guys i am in great problem.
EMUI 9
Jkm-al00a
I am looking for jkm-al00a 8.2.0.143(C675) firmware so I can unbrick my device can anyone please help me
Muhammad Shahroz Sipra said:
Hi My huawei y9 update to 9.1 andriod emui was done and when i installed it it said that picture info missing and entered erecovery mode. Now i have 5 option one is download latest version and second is emergency backup, third is factory data reset and 4 is reboot, and 5 is shut down, Nothing is happening on reebot it get back to e recovery itself again in download latest version and recovery mode it says that download failed packages are missing. Help me guys i am in great problem.
Click to expand...
Click to collapse
Hi friend, did you get help? I have the same condition. And it is really frustrating
i have huawei y9 which is blocked and have tried all possible methods to unlock nothing seems working i mean all.Its a huawei y9 jkm lx1 talkback 7.3 282(1c) i dont know what to do with this phone can somebody help me?
adeii said:
Common problem with Huawei, try to flash stock rom that you had on phone when you have buy it. Be careful on version and region and if it is Cxxx or CxxxCUST.
Try to update HiSuite and try again. Do you have Y9 2019 (JKM-L01, LX1, L03) or Y9 Prime 2019 (JKM-L21) ? See on backside of phone, on bottom.
If you have unlocked bootloader, you can some custom rom. Do you have custom recovery (TWRP)?
Or you can use right rom with pro-teammt.ru, creators of Firmware Finder for Huawei/Honor. Like there.
You will need to use eRecovery and change DNS to redirect phone to use pro-team site in stead of official.
Or try multirom tool to unbrick phone / repair rom. https://pro-teammt.ru/en/multi-tool-huawei-honor/
Click to expand...
Click to collapse
STK-L21, STK-L22 is Y9 prime