Hello, forgive my English but I write through a translator. I have a Honor 6 H60-L12 after unlocking the bootloader, root and custom recovery I could no longer flash any firmware. Helpme Please
Here is a way!!
Dload honor multi tool on PC, run it, enter honor 6 on multi tool, then put your phone into bootloader mode (vol down + power) and enter the following numbers for recovery (I think it's 1) and hit enter, then select the EMUI you had, e.g. like my phone honor 6 h60l04 with Android marshmallow, I would select number "3" and then enter because Android 6 has EMUI 4.0 and agree that you have your bloader unlocked, install one of the recoveries it shows. Then have a rom that's based on your previous stock android version e.g. Android 6 rom for my phone (KingVip worked best for me) and finally install it with your recovery, wiping your data then clicking install for best measures
Hope it works for you?
Related
Hello,
I ask for help because my T- L09 Mate 7 is stuck on black screen , since I tried to install the recovery by this application :
[ ROOT ] Rashr - Flash Tool, which asked me to reboot the phone to install the recovery ...
The phone simply vibrates when I try to do a hard reset or reboot the sd, impossible to launch a SHIFT forced by SD, the screen will light more bluntly .
My mate is 7 ROOTE my sub kitkat through a downgrade then installing it : HUAWEI MT7 - L09 V100R001C00B137SP03 but no recovery .
Please help me I bought two weeks there's a particular and I cracked the edge of ...
Thank you for your return and technical support .
Best regards.
To the Pros, and experts ,
I am seeking some help, to solve the issue that almost tried everything and no luck
I unlocked my bootloader, Rooted installed TWRP and installed a Stock L29 Rom. for my Mate 8 NXT l29
everything was going ok, I have installed some Modes until i reached to some mode for Reboot menu and flashed it, then i got stock on the
H logo , i was able to do the following,
installed Stock Recovery back through SRK tool
load the B200 Firmware Update.app on deload folder , restart the phone to update mode through VOLup & VOLdn & Power Key
installing update Completed, and succeeded i need to mention that i can not reboot to recovery , once i do , the device reboot to the update screen
restarted ,
Stock on HUAWEI Logo all over again.
Please, some steps and pieces of advice to get out o this.
Thank YOU ALL
do a wipe - cache and factory reset first.
Hi, so a year or so ago i bought a P8 lite. I didnt like running android 5, so after a bit of messing round i finally managed to update to the Dual-sim C432B550 software (a stable build of android 6). At the time it was running ok but it began to slow down so i decided to look for newer software and came across C432B586, I downloaded the UPDATE.APP file and put it in the dload folder in my SD card. But when i went into setting/update/menu, there was no local update option so i decided to just do a clean flash. I used the update extractor to extract SYSTEM.IMG, CUST.IMG, BOOT.IMG and RECOVERY.IMG. I then booted into fastboot mode on my phone and flashed all of these files successfully, but when it rebooted it just gets stuck on the huawei logo, i cant boot into recovery mode or any other safe boot options. Also when i try to charge it just displays a red blinking led and only randomly turns on sometimes.
Is there anything i can do, im at my wits end and i really dont want to buy a new phone right now?
Hi there and welcome to Assist,
Here some solutions from owners in this thread: Huawei P8 Lite Bootloop (cant enter fastboot// can enter huawei recovery) (B188)
AmINoS007 said:
...so I suggest to download the B204 version and like I said extract the update.app and put it in the sd card in a folder name him dload and then press the 3 buttons at the same time, this should work I hope
Click to expand...
Click to collapse
blackdogdz said:
Hello,
i let the phone stuck in the loop and do "adb reboot-bootloader" it fails of course but i kept redoing it by pressing up key then enter in the windows command shelle i did it like a maniac until it magically managed to succeed int bootloader moder from there i flashed TWRP then an unroot zip and tada saved my phone.
I hope it can help at least to get in that stupid fastboot mode !
Click to expand...
Click to collapse
For more questions related to P8 Lite please use this forum:
> Huawei P8lite > P8lite Q&A, Help & Troubleshooting
Good luck
Hello everyone,
I've honor 6 L12 rooted, unlocked bootloader as I can see in fast boot and multi tool, I've installed TWRP recovery.
I just made a backup through TWRP saved in internal SD storage, and try to install but since that try, I hade problem like model changed to L01 and my version is ending with B000
Also the shape and look (of firmware and theme), have been changed.
I don't know what happened and why!
I tried to to restore custom rom and recovery but couldn't.
Now I can't use recovery mod because it's giving me this: Error!
Function No : (Func_Boot_RECOVERY)
Error No : 2
I've tried to use multi tool giving me error with any writing to device:
Faild remote command not allowed
Note: I'm still able to access normal mod, but it's hard, I've to try ton of times pressing buttons to boot to normal mod.
Please any help dears.
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
ALHARTHI6 said:
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
Click to expand...
Click to collapse
Which firmware you were on before issue?
No I didn't
As I said trying to restore my backup through TWRP but was in internal SD., that's it.
My real model is L12.
Version, I don't remember but it was on android 5.1.1 EMUI 3.1
Now I just used Sd method and recover device with last 4.0.1 EMUI for devolvers, but no Arabic language.
How to go to another firmware?
What is the best, satable one for my device?
And is there a good custom stable rom, especially if android 7 ?
Please full answer if available
Thanks again
Hello all !
I have a big issue on my Huawei Y9 2019. I updated the software version moving from EMUI 8.2.0 to EMUI 9.1 via HiSuite. The HiSuite downloaded then the new version and installed it. Once the update was complete, the phone rebooted.
The problem is that the phone does not boot correctly. It says that "Your device has loaded a different operating system" and immediatly goes to eRecovery where 4 options are available: Download latest version and recovery, Wipe data/factory reset, Reboot and Shutdown.
- I tried to select the 1st option but it goes to a "Getting package info failed".
- I tried then to Wipe data/factory reset and Wipe cache partition. Same result, eRecovery each boot.
So I decided to search for stock ROM available online and downloaded ROM on the internet:
- Huawei Y9 2019 JKM-LX1 JKM-L21 Jackman-L21 8.2.0.102(C185) Firmware 8.1.0 r1 EMUI8.2 05015JMY androidhost.ru
- Huawei Y9 2019 JKM-LX1 JKM-L21 Jackman-L21 8.2.0.102(C185) Firmware 8.1.0 r1 EMUI8.2 05015JMY
- Jackman-L21 8.2.0.130(C185)_Firmware_8.1.0_r1_EMUI8.2_05015JMY BY BLOG.GSM-SOCIAL.COM
Tried the mode download, create a dload folder and put the update.app inside the root folder of an SDcard (Vol up + down + power) but none of them works. It says that "Software install failed. Incompatibilty with the current version. Download the correct update package.''.
I'm really lost, I don't know what to do, these are the only ROMs available for JKM-LX1. What should I do please.
Thank you for you help ^^
Try Fastboot
Never heard of this phone.
Common problem with Huawei, try to flash stock rom that you had on phone when you have buy it. Be careful on version and region and if it is Cxxx or CxxxCUST.
Try to update HiSuite and try again. Do you have Y9 2019 (JKM-L01, LX1, L03) or Y9 Prime 2019 (JKM-L21) ? See on backside of phone, on bottom.
If you have unlocked bootloader, you can some custom rom. Do you have custom recovery (TWRP)?
Or you can use right rom with pro-teammt.ru, creators of Firmware Finder for Huawei/Honor. Like there.
You will need to use eRecovery and change DNS to redirect phone to use pro-team site in stead of official.
Or try multirom tool to unbrick phone / repair rom. https://pro-teammt.ru/en/multi-tool-huawei-honor/
Hi My huawei y9 update to 9.1 andriod emui was done and when i installed it it said that picture info missing and entered erecovery mode. Now i have 5 option one is download latest version and second is emergency backup, third is factory data reset and 4 is reboot, and 5 is shut down, Nothing is happening on reebot it get back to e recovery itself again in download latest version and recovery mode it says that download failed packages are missing. Help me guys i am in great problem.
EMUI 9
Jkm-al00a
I am looking for jkm-al00a 8.2.0.143(C675) firmware so I can unbrick my device can anyone please help me
Muhammad Shahroz Sipra said:
Hi My huawei y9 update to 9.1 andriod emui was done and when i installed it it said that picture info missing and entered erecovery mode. Now i have 5 option one is download latest version and second is emergency backup, third is factory data reset and 4 is reboot, and 5 is shut down, Nothing is happening on reebot it get back to e recovery itself again in download latest version and recovery mode it says that download failed packages are missing. Help me guys i am in great problem.
Click to expand...
Click to collapse
Hi friend, did you get help? I have the same condition. And it is really frustrating
i have huawei y9 which is blocked and have tried all possible methods to unlock nothing seems working i mean all.Its a huawei y9 jkm lx1 talkback 7.3 282(1c) i dont know what to do with this phone can somebody help me?
adeii said:
Common problem with Huawei, try to flash stock rom that you had on phone when you have buy it. Be careful on version and region and if it is Cxxx or CxxxCUST.
Try to update HiSuite and try again. Do you have Y9 2019 (JKM-L01, LX1, L03) or Y9 Prime 2019 (JKM-L21) ? See on backside of phone, on bottom.
If you have unlocked bootloader, you can some custom rom. Do you have custom recovery (TWRP)?
Or you can use right rom with pro-teammt.ru, creators of Firmware Finder for Huawei/Honor. Like there.
You will need to use eRecovery and change DNS to redirect phone to use pro-team site in stead of official.
Or try multirom tool to unbrick phone / repair rom. https://pro-teammt.ru/en/multi-tool-huawei-honor/
Click to expand...
Click to collapse
STK-L21, STK-L22 is Y9 prime