Database Info

Ota via twrp

Today i received ota update. Can i install ota via twrp or i should install stock recovery..

.

Installed ota via twrp successfully but lots of apps and updater app missing and unable to oem unlock so I cant flash twrp emui 5 I tried to install second update mannually but it says incapablity with current version.my model is bln_l22 current build is nrd90m test key

.

Bln-l22c675b320 currently I cant flash twrp recovery. When in fastboot mode phone unlocked and frp locked.so cant flash boot recovery any thing dload method also not working.

Not working tried but command not allowed.

Thanx for quick reply..i also want to roll back but there is no rollback available for my country india. And dload method not working it says incapablity with current version.

I have tried this rollback but this is not compatible.my model is bln-l22c675.

Working but no volte no theme no updater no twrp no root. but mainly volte also mobile network setting not working. I think its time to go to service center

No updater app and dload method not working due to frp lock how can I try firmware finder.

Ok i rollback to mm but due to no rollback available for my country i have to flash us roll back now i have install us version.can i install back my country firmware using firmware finder..

Rommco05 said:
Maybe can, you have US version MM? Why after rollback you instal US version? Model rollback was NRD900... and thats something like international and after you must install correct package uff, I think this will be strange. Probably you able to install US Nougat if you have now US version MM
Click to expand...
Click to collapse
I dont think he will be able to roll back to his country firmware as there is no rollback package available

I did roll back to us bln l24 then force update to nogout bln-l22c675b320 firmware finder thanx to rommco05..

dload method, no firmware file for Nougat i download is valid!

I need help! I often softbrick my device, but can be fixed by using official 6.0 update.app However updating back to emui 5 takes way too long. But every firmware i download from huawei firmware finder isn't valid for dload for some reason! Help!

Did you already tried with firmwares listed as "FullOTA-MF-PV" available on hwmt.ru site, section firmware database? The Point Version is a firmware that must work while you're executing a dload method flash, the safest usually.
What's your build number? I'll provide a valid firmware to use with dload method.

BLN-L21C432 but i didnt see any MF-PV for b360+ so i dont think there are... that, or i am blind

Use team mt tool extract update.app from firmware and use Huawei extracter to provide required file

Filo 97 said:
BLN-L21C432 but i didnt see any MF-PV for b360+ so i dont think there are... that, or i am blind
Click to expand...
Click to collapse
Yeah, latest is B360, EMUI 5. Dload it and then update regularly to latest build, B371.

RedSkull23 said:
Yeah, latest is B360, EMUI 5. Dload it and then update regularly to latest build, B371.
Click to expand...
Click to collapse
Which of the two .zips?

Filo 97 said:
Which of the two .zips?
Click to expand...
Click to collapse
The biggest one with dload method first of all, then the other two dload too (or flash by TWRP)

TWRP says command unknown, and how am i supposed to flash the second one? (There is no third file) Do i dload big one, then boot to EMUI, then shutdown, extract SD, switch dload folder, and install the second?

Refer to this guide https://forum.xda-developers.com/showpost.php?p=73954487&postcount=240

i have also same issue with my honor 6x not working dload installing failed on 5%

shehroz71 said:
i have also same issue with my honor 6x not working dload installing failed on 5%
Click to expand...
Click to collapse
Did the failure brick your phone? or the phone just reboots itself normally? are you sure that your firmware is approved first for installtion before you apply it? (you can know this using Firmware Finder by checking if it's approved first or not for installation by Huawei)

[GUIDE] Upgrade from EMUI 4.1/Android 6.0 to latest firmware

It took me 2 full days to finally successfully upgraded my ancient firmware (L09C16B170) to the updated version (L09C432B397). There are a lot pieces of information that I gathered from this forum and all over the internet that collectively helped me navigate this ordeal. Just want to share it with anyone who is in the same boat, although I know that P9 won't last for too long since P10 has been out for a while. However, if you still want to revive your P9, keep reading.
Requirement
Before reading, you need to understand ways of entering different modes of your P9 phone, which will be used many many times during your upgrade:
Enter recovery mode (also how you enter TWRP) - see this GUIDE
Enter fastboot mode - see this GUIDE
Enter manual upgrade mode (also called dload method; This is NOT TWRP method) - see this GUIDE. Please IGNORE any software or download information in this guide. I want you to refer to this guide for how to do it, NOT what to use or download!
You also need to download and know how to use ADB tool which is quite simple. Search the forum or google and you will find plenty of information and the download links. If you hate command lines, you can even use the GUI version from here.
You will probably also need to use Firmware Finder for Huawei (HWFF) to download firmware of interest for manual update during this process. HWFF is an app that can be installed for free via your phone Google Play Store. The downloaded firmware is saved under the HWFF folder in the internal memory. You might need to unzip these files for upgrade via dload method or directly via TWRP method without unzipping. However TWRP method requires you to unlock the bootloader and install TWRP in the phone (see below for details).
First step - debranding
If you are already on C432xxxx, you might just skip this step. I followed this thread partially (Debranding Guide by Z-Blade), since the whole thing doesn't work for me 100%.
Z-Blade did a fantastic job describing how to debrand his C34 firmware to C342B361. My original version is C16B170 which is a South Africa branded firmware. But I found certain steps in this guide could be omitted and certain steps didn't work in my case. Here is my modified version based on Z-Blade's version:
1. Unlock your bootloader and install TWRP
How to unlock bootloader? Follow this GUIDE. Even though it's for Huawei Ascend XT. It works for P9 as well. You only need to complete Part 1.
After you unlock the bootloader, install TWRP. Depending on which firmware version you're on, the version of TWRP that might work for your device changes. I encountered numerous booting loops due to incorrect version of TWRP. Finally I found that these three versions work for me (3.1.0-0, 3.1.1-0, 3.1.1-1). Always go with the highest version first (3.1.1-1). If you find yourself stuck in the booting screen, long press your power button until you get out of it and install another version of TWRP. Please go to TWRP official website to download TWRP for Huawei P9. Follow this GUIDE to install TWRP recovery on your phone.
2. Flash OEM info file for C432
After you unlock the bootloader and install TWRP recovery, download oeminfo-huawei-p9-eval09-c432.zip from this THREAD and flash it via TWRP method.
3. Flash C432B136 firmware
Download and flash the dload-huawei-p9-eval09-eva-b136.zip via dload method from this thread. After flashing and rebooting your phone, you should be on the L09C432B136 firmware. NOTE: If it boots up to a white screen asking you to enter password, reboot into recovery by holding volume up when you powering up your phone, do a wipe partition and factory reset. You may need to reboot your phone a number times before the phone boots up correctly.
Up to this stage, you have debranded your phone to an european version.
Second step - stepwise firmware upgrade
1. Update from B136 to B166 or B182
As mentioned in Z-Blade's original post, many people will not be able to directly update from B136 to B182. I am one of them. Go into the updater in the phone setting, refresh "check for update". If you can receive B182 update, by all means go for it. If you only receive B166 update, go for it as well. After B166 update and rebooting your phone, check updater again to see if you receive B182 update in the Settings menu. If this method does not work, manually update to B182 by following the steps here via dload method.
2. Update firmware from B182 to B360/361/378 and also upgrade OS from Android 6.0/EMUI 4.1.x to Android 7.0/EMUI 5.0
According to Z-Blade, "After your phone has rebooted and you are on the B182 firmware, you need to now update the firmware to B361 via Huawei Updater 2.0". However, in my case, I tried many times and always failed at this step. I found a workaround by updating to B360 instead of B361. Please follow this GUIDE to update to B360 or B361, whichever works for you. However, please pay attention to following change that I found critical:
- The version of Huawei HiSuite is critical for the success in this step. The GUIDE provided Hisuite download link (version 5.0.0.301_OVE). However, it does not work together with Huawei Updater 2.0 in my hands. This error has wasted me almost half day. Instead, I finally found out the problem and went to HERE to download the version 5.0.1.300 and it finally worked
- However, if even after HiSuite and Updater both work together fine the update does not proceed successfully (the updater might get stuck), you need to update it manually via dload method. Search EVA-L09C432B360 or EVA-L09C432B361 in Firmware Finder for Huawei as mentioned above and download the Full-OTA version (~2G). After download, move the corresponding folder containing firmware zip files under "HWFF" folder in the internal memory to the external SD card. Unzip the firmware file and update your phone using dload method. You may also try TWRP method which can install zip files directly, but at this point, you bootloader will be re-locked and TWRP will be gone. You need to unlock the bootloader and re-install TWRP again as mentioned above.
After you successfully update the firmware to B360 or B361, now you should have Android 7.0 and EMUI 5.0 on your phone. Now go to the updater in your phone setting. You should receive B378 OTA update. Proceed with the update...
You might not need to strictly follow following steps to update your phone to any firmware beyond B378. However, since a lot of new ROMs are based on B380+ or even B390+, if you want to use those, you might need to further update your firmware first.
2. Update firmware from B378 to B383
After updating to B378 and rebooting your phone, check if your phone receives B383 update OTA. If yes, proceed. If not, go to HWFF, download B383 Full-OTA firmware and update via either dload or TWRP method.
3. Update firmware from B383 to whatever later version
After successfully updating your phone to B383, you basically can flash your phone with anything firmware and ROMs built on B380+. I find it unnecessary to update to B386. What I did was that I directly updated from B383 to B394 by following this GUIDE. Since I wanted to try BlueWei 5.7 which is based off B397, I also followed the same guide to update my firmware to B397 before flashing BlueWei ROM.
Now please enjoy all kinds of new ROMs and the fast, revived P9. After this update, my P9 is super smooth (the original firmware and OS was utterly slow and sluggish) and I think I will keep using this phone until it really can't keep up with the hardware requirement of new apps etc.
Hope my guide is helpful!

Nice job to update things and summarize all together. Few comments, though
- Not necessary to go back to c432 b136, to b182 is enough:
https://forum.xda-developers.com/showpost.php?p=75105886&postcount=280
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
- For Nougat, please use Huawei P9 Nougat TWRP:
https://forum.xda-developers.com/p9/development/twrp-t3565703
- For DLOAD method, FullOTA-MF-PV versions should be used
- Besides the two methods listed to initiate DLOAD update, there is also a third one:
'Dial': *#*#2846579#*#*
Project Menu will open, select Software Update

How to downgrade firmware?

I have a new SHT-AL09 with 172 firmware and a locked bootloader.
This firmware prohibits DC-Unlocker from reading the bootloader unlock code.
How do I downgrade to a previous firmware?

Try HuRUpdater: https://forum.xda-developers.com/mediapad-m5/how-to/unbrick-mediapad-m5-install-otas-t3856312
You should be able to install TWRP even with locked bootloader. Download the full OTA and follow the HuRUpdater instructions.

Has anyone tried it yet?
Don't want to be the first, since I do not feel too comfortable and I am awqy for a few days

kev1807 said:
Has anyone tried it yet?
Don't want to be the first, since I do not feel too comfortable and I am awqy for a few days
Click to expand...
Click to collapse
I think there is very little risk. Even when the downgrade fails, you should be able to just flash 172 again with HuRUpdater to restore back the original state. Don’t try to rollback too far, install the last version prior to 172 and try dc unlocker again.

I asked on a german Forum and got the response that TWRP cannot be installed with locked BL - which I find somewhat logical - however, I am reaching for the unlikely event that I can get an open Bootloader somehow....

I am a little confused by the instructions. I have to put the TWRP.img in the folder on the SD Card together with the HuRUpdater.zip file and the firmware zip files. But then what? How do I flash anything?

konradsa said:
Try HuRUpdater: https://forum.xda-developers.com/mediapad-m5/how-to/unbrick-mediapad-m5-install-otas-t3856312
You should be able to install TWRP even with locked bootloader. Download the full OTA and follow the HuRUpdater instructions.
Click to expand...
Click to collapse
I cannot flash TWRP with my locked bootloader. I get an error FAILED (remote: Command not allowed) when I try this when the M5 is in fastboot mode: fastboot flash recovery_ramdisk twrp.img
Found this on the last page of the HuRUpdater thread:
Absolute prerequisite: unlocked bootloader
I don't have this so is there another way to downgrade the firmware?

OK, bummer. You can try the dload method, not sure if that works for downgrades though: dload

konradsa said:
OK, bummer. You can try the dload method, not sure if that works for downgrades though: dload
Click to expand...
Click to collapse
I tried that already. It starts installing but at 5% it stops with an error: Software install failed

Flavio said:
I tried that already. It starts installing but at 5% it stops with an error: Software install failed
Click to expand...
Click to collapse
Firmware finder is probably your best bet: https://forum.xda-developers.com/honor-6x/help/to-bln-l21c185-t3578790

konradsa said:
Firmware finder is probably your best bet: https://forum.xda-developers.com/honor-6x/help/to-bln-l21c185-t3578790
Click to expand...
Click to collapse
Firmware Finder apparently does not work with EMUI8 anymore.
And there is no rollback package available for the M5.
I have always found a solution for these kind of problems on XDA (and I have had a bricked device or two) but for the moment I am at a loss.
Guess I will have to learn to live without root and with the stock Huawei firmware...

Flavio said:
I tried that already. It starts installing but at 5% it stops with an error: Software install failed
Click to expand...
Click to collapse
Flavio said:
Firmware Finder apparently does not work with EMUI8 anymore.
And there is no rollback package available for the M5.
I have always found a solution for these kind of problems on XDA (and I have had a bricked device or two) but for the moment I am at a loss.
Guess I will have to learn to live without root and with the stock Huawei firmware...
Click to expand...
Click to collapse
Sorry mate, tough luck. ? I think the hardware of the device is pretty nice, but the stock firmware is so full of crap and spyware, totally unacceptable.

when downgrading using dload, check for xloader version first.
https://forum.xda-developers.com/showthread.php?t=2433454
I jut downgraded my M5 AL19-CMR 8.0.0.172 back to 8.0.0.161 without any problems.
I used the firmware file from https://androidhost.ru/ I used the 8.0.0.161 dated 17.07.2018, I am in Germany and have as it seems the european version of the tablet!

kev1807 said:
when downgrading using dload, check for xloader version first.
https://forum.xda-developers.com/showthread.php?t=2433454
I jut downgraded my M5 AL19-CMR 8.0.0.172 back to 8.0.0.161 without any problems.
I used the firmware file from https://androidhost.ru/ I used the 8.0.0.161 dated 17.07.2018, I am in Germany and have as it seems the european version of the tablet!
Click to expand...
Click to collapse
For my SHT-AL09 there is no older firmware on androidhost.ru than B172.
I have downloaded the B163 and B152 firmware through Huawei Firmware Finder and I can extract it with HuaweiUpdateExtractor but then what?

Flavio said:
I have a new SHT-AL09 with 172 firmware and a locked bootloader.
This firmware prohibits DC-Unlocker from reading the bootloader unlock code.
How do I downgrade to a previous firmware?
Click to expand...
Click to collapse
From my latest findings:
Bootloader need to be unlocked for DOWNGRADE to sucess in firmware mode with a working dload service repair firmware.
With locked bootloader you'll only be able to DOWNGRADE in eRecovery mode with the latest firmware approved (It will be a downgrade only if said version is the latest approved fetched in eRecovery and inferior to yours current)
I did not find yet how the latest firmware shown/available in eRecovery is fetched into eRecovery. I think it happens in normal mode sometimes when you're connected online. You'll then have to reboot later to eRecovery to be shown...
Now, for your SHT-AL09 B172 with august 2018 secutity patches, the only way to downgrade is to get your unlock code and vice&versa.
Luckyly, third-party sellers are just starting to provide working bootloader's unlock code online for around 30~50€.
New devices are supported.
You just pay, gave them Model ID, IMEI1, Serial, Product ID and you'll get your code within the next hours.
You just pay, gave them Model ID, IMEI1, Serial, Product ID and you'll got it within the next hours. I already tested it on few devices.
FunkyHuawei does it for 130€ per device with other services included.

Flavio said:
For my SHT-AL09 there is no older firmware on androidhost.ru than B172.
I have downloaded the B163 and B152 firmware through Huawei Firmware Finder and I can extract it with HuaweiUpdateExtractor but then what?
Click to expand...
Click to collapse
I am also interested in rooting M5. Where you able to downgrade the tablet from B172 to B161?

No

I am also looking for a way to downgrade my Mediapad M5.
I have Hauwei MediaPad M5 CMR-AL09 (C432) currently running 8.0.0.192. dc-unlocker does not work with this version so I can not unlock bootloader.
This is what I have done:
* Format external sdcard into exfat. I used my Ubuntu Linux computer for this, sudo mkfs.exfat /dev/sdx1.
* Put the empty sdcard into the tablet.
* Download android app "Firmware Finder for Huawei" and I choose CMR-AL09C432B161 (8.0.0.161) FullOTA-MF. Downloaded that into update.zip file.
* I use android app FX File Explorer to get read/write access to the mediacard and to create the dload folder.
* I used android app FX File Explorer to extract only UPDATE.APP file into mediacard and the dload folder. The file is around 4.2GB in size when extracted. I also tried to put all files into dload folder but with the same result below.
* Open dialer and type in *#*#2846579#*#*. Go to software upgrade and choose SDCard upgrade. The tablet will now restart and do the downgrade.
* Problem now is that it goes into 5% and then fails.
Am guessing there is some protection to downgrade into 8.0.0.161 version.
Guys.. Let's solve this. :crying:

Blinkiz said:
I am also looking for a way to downgrade my Mediapad M5.
I have Hauwei MediaPad M5 CMR-AL09 (C432) currently running 8.0.0.192. dc-unlocker does not work with this version so I can not unlock bootloader.
This is what I have done:
* Format external sdcard into exfat. I used my Ubuntu Linux computer for this, sudo mkfs.exfat /dev/sdx1.
* Put the empty sdcard into the tablet.
* Download android app "Firmware Finder for Huawei" and I choose CMR-AL09C432B161 (8.0.0.161) FullOTA-MF. Downloaded that into update.zip file.
* I use android app FX File Explorer to get read/write access to the mediacard and to create the dload folder.
* I used android app FX File Explorer to extract only UPDATE.APP file into mediacard and the dload folder. The file is around 4.2GB in size when extracted. I also tried to put all files into dload folder but with the same result below.
* Open dialer and type in *#*#2846579#*#*. Go to software upgrade and choose SDCard upgrade. The tablet will now restart and do the downgrade.
* Problem now is that it goes into 5% and then fails.
Am guessing there is some protection to downgrade into 8.0.0.161 version.
Guys.. Let's solve this. :crying:
Click to expand...
Click to collapse
Hmhm. I downgraded my Mediapad M5 Pro from 8.0.0.172 to 8.0.0.161
This is what I did:
https://www.android-hilfe.de/forum/...uer-huawei-mediapad-m5-ab-08-2018.892304.html
(short paraphrase of my downgrade-"guide" at android-hilfe.de)
1) check xloader-version
2) Download the potential downgrade from androidfilehost.ru (this worked for me, again, M5 PRO (CMR-AL19), Europe! https://androidhost.ru/byu )
2.1) The structure inside is firmware-name>software>dload
2.2) copy dload onto your SD (root directory)
3)The downgrade-process
3.1) power off the device
3.2) Volume up AND down AND Power Button for some seconds
3.3) Downgrade should start! If folder is not recognized, a Pink screen will appear - just do it from the start.
After rebooting, you should then have the version you wanted to downgrade to.
I have done this several times ( accidently updated once or twice )and it worked without any trouble.
The 5% thing: it stayed at 5% for quite some time. But it always went on after some time, at least for me
I read somewhere, sometime ago that with Firmware Finder the security check that is somewhere included in the file is not removed and therefore you cannot use those files. It seems imperative to me that one uses androidhost.ru (no guarantee that this information is right - so feel free to correct me )
ah, sorry only now I realized that you specified CMR-AL09, we had someone do it for SHT-AL-09, sorry :-/
but why don't you try the files from androidhost.ru (download the correct firmware! I linked the one for the M5 Pro! )

Thanks kev1807 for the input.
I tried the firmware you linked to for Huawei MediaPad M5 CMR-AL09 (C432) version 8.0.0.161. It did not work.
I found the version 8.0.0.190 on androidfilehost.ru and that worked. So I have now downgraded from 8.0.0.192 to 8.0.0.190 but that will not help me much. Downgrading into 8.0.0.161 still does not work.
I was on 8.0.0.192 and manage to use the file
"Huawei MadiaPad M5 CMR-AL19 hw eu Cameron-AL09A 8.0.0.190(C432) Firmware 8.0.0 r1 EMUI8.0 05014XYB [androidhost.ru]"
I have tried these packages but they have not worked.
Huawei MadiaPad M5 CMR-AL09 hw ru Cameron-AL09A 8.0.0.181(C10)Firmware8.0.0r1EMUI8.005014YQD [androidhost.ru]
Huawei MadiaPad M5 CMRCameron-AL19B 8.0.0.161(C432) Firmware Android 8.0 EMUI 8.0 05014XYC androidhost.ru

What are the methods for OTA Update Manually in Honor Note 10

At Present I am in 8.2.0.132. and Latest firmware is 8.2.0.158
in my phone system update showed 8.2.0151
I want to install 8.2.0.158 by downloading through Team MT firmware finder

nayan159 said:
At Present I am in 8.2.0.132. and Latest firmware is 8.2.0.158
in my phone system update showed 8.2.0151
I want to install 8.2.0.158 by downloading through Team MT firmware finder
Click to expand...
Click to collapse
first,you must updated to 151.
second,we have to wait to Rollout 158.
I have read Firmware Finder does not work anymore from Emui 8.2.
I tried, but it's really not working anymore.
I have tried everything but nothing works.
I make a rooted Stockrom and flash it,but the Phone does not start and I have to go back to 151 and wait for the Update....

here is it

I think the original question remains unanswered, is there a way to manually flash an update file? Maybe something similar to Samsung devices where you can install update from sd card / adb for instance?