HELP neded! adhell 3 bricked my device... - Samsung Galaxy S7 Themes, Apps, and Mods

.... actually i think it was my fault.
I run a stock german t-mobile s7 wich was recently updated to OREO
I managed to install adhell 3 which worked fine as an adblocker. One nasty T-mobile app kept draining my battery so i decided to enable the app-disabler on the home screen of adhell3. Unfortunately this seemed to have disabled all apps , including all system apps. Now i am stuck in a bootloop.
Can anyone give me some guidance how to resurrect my phone?
I am in vacations right now.... and i would really appreciated having a working smartphone again...
Thank you in advance...

ok.... i can´t even factory reset it.....I can however go into odin mode...

Norrin_Radd said:
ok.... i can´t even factory reset it.....I can however go into odin mode...
Click to expand...
Click to collapse
Because you can't go into recovery mode when you stuck in a bootloop, following option should help: flash your stock recovery, TWRP recovery or any other recovery for your device you want via Odin. After Odin is done and after the screen goes off you have to imadiately press volume down, power and home button. Now you are in recovery mode and you can factory reset your device. If you don't have a PC near you, you have to wait until you battery is empty, charge it and then you can go into recovery mode and do a factory reset.

Thanks for the answer!
On my device i could somehow mange to enter the factory reset from the odin screen. But i have no clue what i actually did? Do i have to reinstall oreo now? If my google backup is older than the error i produced i guess it is save to reset the device from there no?

Norrin_Radd said:
Thanks for the answer!
On my device i could somehow mange to enter the factory reset from the odin screen. But i have no clue what i actually did? Do i have to reinstall oreo now? If my google backup is older than the error i produced i guess it is save to reset the device from there no?
Click to expand...
Click to collapse
At first, I have to correct myself. I meant volume up, not volume down for recovery mode.
Factory reset from Odin screen? What do you mean? What did you do? And if you did a factory reset and can start and use your phone normally again, everything should be okay. I can't answer your last question because I have no idea.

Patrick9801 said:
At first, I have to correct myself. I meant volume up, not volume down for recovery mode.
Factory reset from Odin screen? What do you mean? What did you do? And if you did a factory reset and can start and use your phone normally again, everything should be okay. I can't answer your last question because I have no idea.
Click to expand...
Click to collapse
hi
Bascialy i could not do a factroy reset because i was stuck in a infinite bootloop. But i could reach the factroy reset menu once i started from the odin screen.

Norrin_Radd said:
hi
Bascialy i could not do a factroy reset because i was stuck in a infinite bootloop. But i could reach the factroy reset menu once i started from the odin screen.
Click to expand...
Click to collapse
You will have to wait until your battery discharge fully after that you can enter in recovery mode by pressing volume up, home button and power keys simultaneously. I have gone through this too.

Related

[Q] Wanting to revert to stock from CYANOGENMOD

Hi, First of all i'd like to thank anyone who has spent their time to come and help me today..
Right my problem. So i've flashed my galaxy tab 2 GT-P3110 Wi-Fi (UK). I wish to know how to revert it back to the original settings (fresh out of the box)
i'll be honest, i'm not the best at of all this. The wife's not happy with what she got (i know right)
wiki.cyanogenmod.org/wiki/Samsung_Galaxy_Tab_2_7.0_(Wi-Fi):_Full_Update_Guide
i followed these steps accordingly. I managed to flash it into cyanogenmod first time. I just wish to go back ics
Any help will be greatly appreciated
Absstephen said:
Hi, First of all i'd like to thank anyone who has spent their time to come and help me today..
Right my problem. So i've flashed my galaxy tab 2 GT-P3110 Wi-Fi (UK). I wish to know how to revert it back to the original settings (fresh out of the box)
i'll be honest, i'm not the best at of all this. The wife's not happy with what she got (i know right)
wiki.cyanogenmod.org/wiki/Samsung_Galaxy_Tab_2_7.0_(Wi-Fi):_Full_Update_Guide
i followed these steps accordingly. I managed to flash it into cyanogenmod first time. I just wish to go back ics
Any help will be greatly appreciated
Click to expand...
Click to collapse
Try this link and read carefully first because cyanogen requires extra steps http://forum.xda-developers.com/showthread.php?t=1838072
acefsw said:
Try this link and read carefully first because cyanogen requires extra steps http://forum.xda-developers.com/showthread.php?t=1838072
Click to expand...
Click to collapse
Yeah see that it says wipe your your before you put it into Download Mode. whats the referring too.
Can't thank you enough mate you've helped me alot today very grateful
Absstephen said:
Yeah see that it says wipe your your before you put it into Download Mode. whats the referring too.
Can't thank you enough mate you've helped me alot today very grateful
Click to expand...
Click to collapse
You can wipe data/ factory reset after installing the stock firmware. Boot into Recovery Mode by holding down Power and Volume Up buttons together until the screen turns on. When the Samsung logo appears, let go of the Power button but keep holding down the Volume Up button until the device boots into recovery. In Recovery Mode, select Wipe data/Factory reset and select Yes on next screen. Select Reboot system now to reboot the tablet
So i flashed the device and it said passed. It rebooted but it's stuck on the samsung logo after it does the sound. I'm able to get into download mode any ideas?
Absstephen said:
So i flashed the device and it said passed. It rebooted but it's stuck on the samsung logo after it does the sound. I'm able to get into download mode any ideas?
Click to expand...
Click to collapse
Yes, reboot to recovery and data/factory reset-----Boot into Recovery Mode by holding down Power and Volume Up buttons together until the screen turns on. When the Samsung logo appears, let go of the Power button but keep holding down the Volume Up button until the device boots into recovery.In Recovery Mode, select Wipe data/Factory reset and select Yes on next screen.Select Reboot system now to reboot the tablet
acefsw said:
Yes, reboot to recovery and data/factory reset-----Boot into Recovery Mode by holding down Power and Volume Up buttons together until the screen turns on. When the Samsung logo appears, let go of the Power button but keep holding down the Volume Up button until the device boots into recovery.In Recovery Mode, select Wipe data/Factory reset and select Yes on next screen.Select Reboot system now to reboot the tablet
Click to expand...
Click to collapse
Brilliant back onto stock now thanks alot for your patience and help i've give you the thumbs up:good:
Absstephen said:
Brilliant back onto stock now thanks alot for your patience and help i've give you the thumbs up:good:
Click to expand...
Click to collapse
Glad to have helped you out. Give a hit to my thanks button, if you don't mind.

Bricked Phone?

I went out partying last night, woke up to a crack on my nexus 5 and wouldnt turn on but the led would flash red. I figured it lost its charge. Charge the phone for few hours, phone would turn on and off right away as if it still were not charged. It would than shut off but restart to a screen that said Firmware Update- Please wait while it installs- B100. Nothing would install, it would stay at 0%. So I held the power button and now, it only turns on to the google sign and keeps looping from there. I tried to turn it on in recovery mode but that doesnt work either. My phone was never rooted, bootloader never unlocked and I never put it in debugging. I dont know what to do!
so the ol' 3-button combo doesn't get you to the bootloader?
Yes, it does. Forgot to mention that.
tonytouch311 said:
Yes, it does. Forgot to mention that.
Click to expand...
Click to collapse
I don't know what you did, but your phone is not bricked. Hope you have a recent backup. If you can get into the bootloader I'd try a factory reset in recovery. If that doesn't work then you're going to have to unlock the bootloader and try to flash the factory image. None of this may work as idk what you did to your phone, but this is what I'd do.
Is flashing a factory image/unlocking bootloader possible even tho I can't get into the settings menu to turn on debugging option?
tonytouch311 said:
Is flashing a factory image/unlocking bootloader possible even tho I can't get into the settings menu to turn on debugging option?
Click to expand...
Click to collapse
Yes, adb and fastboot are not related.
Sent from my Nexus 10 using Tapatalk 4
Are there any guides you all might suggest that are easy to understand?
Ask your friends what happened last night. Sounds like a good party
==**Team Nexus 5 sucks.**==
-Underpowered battery for a 5inch 1080p screen that is non-removable. Weak generic antenna that drops signal. Worst speaker of any device on the market. Cheap plastic build
tonytouch311 said:
Are there any guides you all might suggest that are easy to understand?
Click to expand...
Click to collapse
Alright, here. The catch-all solution: flash the factory image as in this thread http://forum.xda-developers.com/showthread.php?t=2513701.
Just remember to cd to your adb directory, I made that mistake and almost fainted because I thought my device was totally broken when fastboot devices listed nothing.
dicecuber said:
Ask your friends what happened last night. Sounds like a good party
==**Team Nexus 5 sucks.**==
-Underpowered battery for a 5inch 1080p screen that is non-removable. Weak generic antenna that drops signal. Worst speaker of any device on the market. Cheap plastic build
Click to expand...
Click to collapse
Really?? Is this your sig or just something totally irrelevant that you decided to insert into your reply? Do you even own one?
droid_<3er said:
Really?? Is this your sig or just something totally irrelevant that you decided to insert into your reply? Do you even own one?
Click to expand...
Click to collapse
It's his sig. Just ignore him.
I was able to flash everything and it seemed successful. But, I can only get as far as GOOGLE and than it keeps rebooting.
tonytouch311 said:
I was able to flash everything and it seemed successful. But, I can only get as far as GOOGLE and than it keeps rebooting.
Click to expand...
Click to collapse
If that's the case it sounds like you may have knocked something loose internally when whatever happened that caused the damage to your screen. Possibly a solder point or a cable coming loose.
Opened up the back cover, looks like condensation.....ill leave it alone for a few days and try again.
Reset
tonytouch311 said:
I was able to flash everything and it seemed successful. But, I can only get as far as GOOGLE and than it keeps rebooting.
Click to expand...
Click to collapse
Did u do another factory reset after last flash as this may need doing on some phones from what I've watched on good old YouTube...Good luck..
^Why would he factory reset when the phone is wet? You'll short circuit it that way..
The only method of a factory reset I've read about was turning on in Recovery, waiting for the little android, and holding Vol + and Power. Thing is my phone would never get to the little android, just loop on the GOOGLE introduction. Is there another method to factory reset?
tonytouch311 said:
The only method of a factory reset I've read about was turning on in Recovery, waiting for the little android, and holding Vol + and Power. Thing is my phone would never get to the little android, just loop on the GOOGLE introduction. Is there another method to factory reset?
Click to expand...
Click to collapse
Turn your phone off. Then hold power + vol down. It should boot into the boot loader. You'll see a "start" Then use the vol rocker to toggle to recovery. Once there push the power button. You should be in recovery. Then use the vol rocker to toggle to factory reset. Then use power to select it.
jd1639 said:
Turn your phone off. Then hold power + vol down. It should boot into the boot loader. You'll see a "start" Then use the vol rocker to toggle to recovery. Once there push the power button. You should be in recovery. Then use the vol rocker to toggle to factory reset. Then use power to select it.
Click to expand...
Click to collapse
Thats the method I'm unable to use...I was hoping there might be a string of code I could type into a command prompt being that I can only turn on the phone into the boot loader.
tonytouch311 said:
Thats the method I'm unable to use...I was hoping there might be a string of code I could type into a command prompt being that I can only turn on the phone into the boot loader.
Click to expand...
Click to collapse
Try
fastboot reboot recovery
Edit, sorry that's not going to work. Find the stock recovery image. Then try
fastboot boot recovery.img
So I was able to boot in recovery and factory reset, although the problem still persists. I will try and flash all images tomorrow. Thanks for all the help! Happy holidays!

Phone restarted again and again after enabling bluetooth.

Hi Guys,
Any help will be appreciated.
Today after a long time i just enabled my bluetooth ,but after enabling it Phone restarted again and again and iam not able to do anything.
Is there anyway i can make my phone in working condition.
harsh_at said:
Hi Guys,
Any help will be appreciated.
Today after a long time i just enabled my bluetooth ,but after enabling it Phone restarted again and again and iam not able to do anything.
Is there anyway i can make my phone in working condition.
Click to expand...
Click to collapse
Wipe cache and data via recovery or factory reset? OC first backup nandroid.
this problem happen to me most of the time , when ever it happens it mean ur SD has virus so scan it weekly , it sloves my problem
Thanks for your response.
But problem here is that i'm not able to enter in Recovery mode.It is not letting me do anything.
It just started each and every time.
harsh_at said:
Thanks for your response.
But problem here is that i'm not able to enter in Recovery mode.It is not letting me do anything.
It just started each and every time.
Click to expand...
Click to collapse
Can you power it down? If not try removing battery (on your own risk) for 30sec then put back in and try to get into bootloader (Power button+ Vol Down).
If you get in try recovery or flash new recovery via fastboot.

[SOLVED] [LG D160] stuck in bootloop, factory reset does nothing

The phone is stuck in a boot loop at the LG screen, and makes the annoying boot sound every few seconds.
I have tried to start in Safe Mode by holding down POWER and VOLUME DOWN until the LG screen hits, then releasing POWER and pressing POWER again. Instead of starting in Safe Mode, the Factory Reset option comes up. I have tried the factory reset but it does fix anything - the phone still is stuck in a boot loop.
Lastly, when I plug it into my computer via USB, my computer does not recognize anything (using both Mac OS X and Windows). I have tried installing the LG drivers from the LG support website on Windows, but they do not recognize the phone when plugged in.
How can I completely wipe everything and start from a fresh installation?
Thanks in advance
Does anyone have any idea on how to proceed yet? From my understanding, the phone is soft bricked since it is stuck in a boot loop. Starting in Recovery Mode (Power+Volume Down) doesn't work, instead the option for a Factory Reset pops up. Doing the Factory Reset does nothing. Should I try rooting the phone? Or should I try using the LG Flash Tool?
You need to return to stock LG firmware using LG flashtool
turn off your phone and connect your usb cable while you hold the volume up button to enter download mode
Hi jax256,
thanks for your reply. Would you happen to know of a reliable source where I can find the stock LG firmware?
try this link
http://lg-phone-firmware.com/index.php?id_mod=47
jax256 said:
try this link
http://lg-phone-firmware.com/index.php?id_mod=47
Click to expand...
Click to collapse
Thanks jax256! After a few tries, I was able to successfully return to stock.
lgand said:
Thanks jax256! After a few tries, I was able to successfully return to stock.
Click to expand...
Click to collapse
you're welcome, glad to help.

[Solved] P20 Pro Bricked... Anyone can help me?

First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Any one can help me?
I'd try this
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
But, I got stuck on the TWRP boot screen.
Also, I'm still available to use the fastboot mode.
Finally, I solve the problem by flashing the e recovery image,and then low level forma data.
Hope it helps for someone have the same issue like me.
zhu911203 said:
First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Click to expand...
Click to collapse
I have exactly the same Problem. Did you solve it already?
zhu911203 said:
First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Any one can help me?
I'd try this
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
But, I got stuck on the TWRP boot screen.
Also, I'm still available to use the fastboot mode.
Click to expand...
Click to collapse
Can you still have access to erecovery : volup at power with USB cable plugged. If yes you can try a recovery but you will loose all your data
Can you have access to fastboot : vol down at power up. If yes you can try to flash by adb by following instruction from discussions in the forums.
zhu911203 said:
First, I was doing a full wipe in TWRP, But I realize I didn't back up my photos/Documents.
So I long pressed the power button to restart.
And now, i got a bricked phone...
Any one can help me?
I'd try this
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
But, I got stuck on the TWRP boot screen.
Also, I'm still available to use the fastboot mode.
Click to expand...
Click to collapse
Can you still have access to erecovery : volup at power with USB cable plugged. If yes you can try a recovery but you will loose all your data
Can you have access to fastboot : vol down at power up. If yes you can try to flash by adb by following instruction from discussions in the forums.
Schuchi said:
I have exactly the same Problem. Did you solve it already?
Click to expand...
Click to collapse
yes, I solved the problem, hope it will help you.

Categories

Resources