Database Info

I'm stuck

Hi guys,
for some reason after I did update to KangVIP I can't get rid off it. Besides I got no wifi and bt and I was going to start over with b023 as suggested but at this point I wont bother anymore.
I did wipe the system, I did advanced wipe using twrp but no matter what I do none of the stock firmwares are going through however the Kanga one always goes through.(KangaVIP goes through only in TWRP)
twrp 2.8.7.0
wipe
advanced wipe
I select all the partitions
mkdosfs process ended with error=1
unable to wipe /usb
unknown mtp message type: 1
unable to wipe /usb
I go back, restart to fastboot, (device is saying there is no OS installed), I restore the recovery, create dload folder on my sdcard, put there 028 (actually I tried all of them already), volume+ volume - power and I get error.
What am I missing ?
Anyone can help ?
Thanks in advance.
Eric

First you did a OTA from B029 to B209?
If so you are now on a Android 6 ROM you cant go back to Android 5 without a Rollback from Huawei.

Hirs_E_Fruit said:
First you did a OTA from B029 to B209?
If so you are now on a Android 6 ROM you cant go back to Android 5 without a Rollback from Huawei.
Click to expand...
Click to collapse
Yes I did then I wiped everything and started with b028 again.
Same thing, wifi didn't work same with BT.
Wipe again and this time I did local update and since the local update I can't go back not even b029.

77Eric77 said:
Yes I did then I wiped everything and started with b028 again.
Same thing, wifi didn't work same with BT.
Wipe again and this time I did local update and since the local update I can't go back not even b029.
Click to expand...
Click to collapse
Right now you are on a Android 5 or Android 6 ROM?
If you on a Android 5 ROM you can force update a Complete ROM to install a clean system and try if everything works.

Hirs_E_Fruit said:
Right now you are on a Android 5 or Android 6 ROM?
If you on a Android 5 ROM you can force update a Complete ROM to install a clean system and try if everything works.
Click to expand...
Click to collapse
I'm stuck on 6.0
I know I can do force update on 5.0 I said it above I just can't do it with 6.0 -> b029, only with your rom.

Anyone else is having this issue ?
The Kanga rom got a quite few problems no wifi and not BT, Google play services crashing (this can be fixed with gapps) my co worker just tried it with his own methods and same issue. After I went through the whole Kanga thread 60% of the posters got problems most of them are ignored.

I don't have any problems but I think the people with problems are people who have a DAV 701L.

Hirs_E_Fruit said:
Right now you are on a Android 5 or Android 6 ROM?
If you on a Android 5 ROM you can force update a Complete ROM to install a clean system and try if everything works.
Click to expand...
Click to collapse
Hirs_E_Fruit said:
I don't have any problems but I think the people with problems are people who have a DAV 701L.
Click to expand...
Click to collapse
I got DAV-703L, just simple question, why is the wifi and bt not working ?
When I get into Kanga I can remove the root or deny access to it is there a way to ditch it ?
Yeah I know it's working for you and it's not working for 10 other people including 703L owners. There is something wrong with the rom no doubt about it.

77Eric77 said:
I got DAV-703L, just simple question, why is the wifi and bt not working ?
When I get into Kanga I can remove the root or deny access to it is there a way to ditch it ?
Yeah I know it's working for you and it's not working for 10 other people including 703L owners. There is something wrong with the rom no doubt about it.
Click to expand...
Click to collapse
I think there was an error while flashing and without a full clean Rom flash i can't see a solution.
Before I got it to work I flashed it more than 3 times and everytime everything worked so I think don't think the ROM is that bugged.

Hirs_E_Fruit said:
I think there was an error while flashing and without a full clean Rom flash i can't see a solution.
Before I got it to work I flashed it more than 3 times and everytime everything worked so I think don't think the ROM is that bugged.
Click to expand...
Click to collapse
The first rom you introduced is working "fine" I get the wifi and bt no problem but once I switch into the latest build it's gone.
Any idea where can I get full clean Rom ?
This one is a no go http://www.needrom.com/download/p8max-dav-703l/

I managed to rollback to 5.1.1 but when I try to force flash it, it says it's not compatible.

If you don't update properly to B209, when you flash any B209 rom you are going to run into issues such as the wireless Bluetooth and sim card switching for some. If you properly updated the dload method should have completed successfully. Look at the kernel and radio version of B209 in About phone and compare it to others and see if they match.

ajsmsg78 said:
If you don't update properly to B209, when you flash any B209 rom you are going to run into issues such as the wireless Bluetooth and sim card switching for some. If you properly updated the dload method should have completed successfully. Look at the kernel and radio version of B209 in About phone and compare it to others and see if they match.
Click to expand...
Click to collapse
I don't want to use your rom even if you removed the Chinese it's still inside the system. Boot load times take much longer. Unexpected crashes. I did try it on 4 phones with OTA and local updates 2 are working but the Kang does crash twice a day minimum.
All what I'm asking is how to restore it to it's original settings, this was my worst mistake ever.
What I'm trying to say if I do something I do it properly just look at your thread 85% failure ratio that doesn't look like it was done properly does it ?

77Eric77 said:
I don't want to use your rom even if you removed the Chinese it's still inside the system. Boot load times take much longer. Unexpected crashes. I did try it on 4 phones with OTA and local updates 2 are working but the Kang does crash twice a day minimum.
All what I'm asking is how to restore it to it's original settings, this was my worst mistake ever.
What I'm trying to say if I do something I do it properly just look at your thread 85% failure ratio that doesn't look like it was done properly does it ?
Click to expand...
Click to collapse
Really dude?? No worries, it will be the last time I do anything for the P8Max. Maybe you should just sell the phone since you're having all sorts of issues with it....or maybe you should have left it totally stock then. Or maybe read through the Mediapad X2 forums because the two phones are very similar.

S8+ oreo update interrupts at 24%

does anybody know whats goin on with this issue?...crb9 update keeps getting interruptedand the phone reboots

Mine does the same with brb1, now when I try to update it says I'm up to date

hmm..im also on brb1...wonderr if thats the issue?

I was getting stuck at 24% as well. I did this and it worked for me coming from december 2017 update. I downloaded tje update over wifi. I then turned off wifi and had data going. I plugged the phone into charger and went to settings > software update and the option to continue appeared and I was able to update it no problems. Hope this helps

My father's S8+ is doing the same thing here, gets to 24% and fails. I tried the above method of disabling wifi and charging during install, but that didn't work.
I was about to get a logcat to upload but now it's saying it's up to date when I check for updates. I'm also on version BRB1

i went back to L1...but i dont think thats the issue...mines worked after a similar method...i restarted the phone after it was finished downloading...and it went pass 25%...i was about to give up to...i was like..screw this..completed...feels good...so i guess everyone has their own trick...maybe 1 might work
Sent from my SM-G955U using XDA-Developers Legacy app

I had the same issue but worked around it. Here is what I did.
1. Download BQL1 to SD Card and BRB1 to SD Card
2 Odined back to BQK5
3. When it goes to install this it will error out and install bql1. from SD Card
4. Installed BRB1 from SD Card
5. Did OTA update to Oreo.
It is kinda of a pain but it did work for me.
Good Luck

tenbender said:
I had the same issue but worked around it. Here is what I did.
1. Download BQL1 to SD Card and BRB1 to SD Card
2 Odined back to BQK5
3. When it goes to install this it will error out and install bql1. from SD Card
4. Installed BRB1 from SD Card
5. Did OTA update to Oreo.
It is kinda of a pain but it did work for me.
Good Luck
Click to expand...
Click to collapse
Whe you say you downloaded, where did you get your downloaded versions? I am not rooted, does this matter?

Homeuser66 said:
Whe you say you downloaded, where did you get your downloaded versions? I am not rooted, does this matter?
Click to expand...
Click to collapse
Sorry for the confusion.. I downloaded the BQK1 from a link found on this post. This download contained the files to use with Odin.
I believe that I got the other files from the Samsung Website.
I don't believe that rooting would be a problem but I am not rooted so I can't answer that with 100% certainty.
Ten

No confusion. Just wanted clarification. I'm not rooted, neither are you. I'll find the pay your referring to and try myself.

I flashed my phone with G955USQS2BQL1 and it updated just fine. It even did the March security update after the Oreo update.

need help
my galaxy s8+ Att sm-g955u can't update from firmware
G955USQU1AQC9 HOW CAN IUPDTAE TO OREO because I can't use bixby
please can someone help me

New H918 Oreo Security Update

So the wave of the Oct. Security Update for the H918 is out. This new version is completely safe to update since this is still ARB 1 (See attached pictures).

Is it strictly security, or are there any UI/UX bugfix or additions?

nfc problem
bro , your nfc working ? i dont know why my nfc wont turn enable.. im using lg h918 v20 upgrade to oreo but the nfc wont enable.. when i click enable they turn disable quickly.. any solution ?

Ak7J4 said:
So the wave of the Oct. Security Update for the H918 is out. This new version is completely safe to update since this is still ARB 1 (See attached pictures).
Click to expand...
Click to collapse
I got this notification for a system update and I just rooted about a week ago.
Since im rooted can I accept and install the system update. If yes how do I do this in twrp. Will I loose root?

pvaldeben said:
I got this notification for a system update and I just rooted about a week ago.
Since im rooted can I accept and install the system update. If yes how do I do this in twrp. Will I loose root?
Click to expand...
Click to collapse
If you accept, the phone will go into a bootloop since the stock recovery has been replaced by twrp. So don't accept the update. Reflashing the ROM would stop the bootloops if you just so happen to accept it.

Mnementh666 said:
Is it strictly security, or are there any UI/UX bugfix or additions?
Click to expand...
Click to collapse
To me I believe its just strictly security tbh since I haven't noticed anything else. I will see if performance has been improved or not

Ak7J4 said:
To me I believe its just strictly security tbh since I haven't noticed anything else. I will see if performance has been improved or not
Click to expand...
Click to collapse
Cool. I won't stress it then. Thanks

pvaldeben said:
I got this notification for a system update and I just rooted about a week ago.
Since im rooted can I accept and install the system update. If yes how do I do this in twrp. Will I loose root?
Click to expand...
Click to collapse
Actually I did accept it when I first saw the notification then when I realized I was rooted (about 4 years without root) the phone booted in to TWRP and I freaked out ... so I moved the slider to see TWRP was asking to enter some sort of password or key for it to continue. but then I saw the cancel button and I cancened and it took me back to the main TWRP screen where I just rebooted the system without issues.
The only reason I rooted was because OREO battery life was 10 % per hour weather I touched or did not touch the phone. I thought this security patch might have battery optimizations.
But thanks for your replay, I'm going to stay away from this system update since I'm rooted not. I guess I got luck and not bricking my phone.

20G Security Update Changelog
FYI
Software versions & updates: LG V20
Android Security Bulletin—October 2018

Android 10 OTA released again.

I just got ota update released again, it is 1.15 GB, i will wait with update.
I am located in Eastern Europe. Good luck

Have received the notification.
Can confirm the size.
Will not install it for now.

I am on Android Pie, so i don't know what's up with people who have Android 10 already installed.

underdoq said:
I am on Android Pie, so i don't know what's up with people who have Android 10 already installed.
Click to expand...
Click to collapse
I'm also on Pie. I have received the notification am the size is what you mention (1.15gb) but since is brting problematic, I will not install for now.

I just got it too, should i update?

Just installed!
Everything is fine not any big bug that worth mentioning!
It can lag a bit if you wont make a factory reset afterwards
Came directly from pie 10.0.20.0 everything is fine i think ots safe to install

AnonymousAL said:
Just installed!
Everything is fine not any big bug that worth mentioning!
It can lag a bit if you wont make a factory reset afterwards
Came directly from pie 10.0.20.0 everything is fine i think ots safe to install
Click to expand...
Click to collapse
Is it the same update as few days ago?
11.0.4? If yes ,then I wonder why they stop the OTA just to start it over without changing/fixing anything...
It's like xiaomi devs are a bunch of amateurs who doesn't own this device therefore unable to test their updates and just hope for the best when they release one...

Yes it's the same 11.0.4.0

AnonymousAL said:
Yes it's the same 11.0.4.0
Click to expand...
Click to collapse
Thanks for the reply!

gonna update until they pull it back again

I'm on Q from the first update - 11.0.2.0 - which is running without major bugs, just a bit worse battery usage and less maximum brightness They don't offer me any update yet.

digitri said:
I'm on Q from the first update - 11.0.2.0 - which is running without major bugs, just a bit worse battery usage and less maximum brightness They don't offer me any update yet.
Click to expand...
Click to collapse
There's a process for applying the OTA or a fastboot image you can use to upgrade.
I expect you'll get a OTA offer soon anyway. I just missed it last time but got it now. OTA from 10.0.20.0

Thread closed
Please use existing threads like this
strongst
Forum Moderator

Arrow OS last update 31st of July ERROR1 TWRP

Hello everyone!
I just download the last update via update in the phone and normally it boots me into TWRP then I search install it and thats it. The thing is that this last update unfortunately when the logo is installing in the middle throw me an error E1001 Error 1 and semi brick my phone, when I choose restart it literally throws me back to Fastboot.
Did anyone encounter the same fate? Or maybe my update file got corrupted?
Any ideas how can I fix this and have the last update installed for this ROM?
Thank you!

SebixWolf said:
Hello everyone!
I just download the last update via update in the phone and normally it boots me into TWRP then I search install it and thats it. The thing is that this last update unfortunately when the logo is installing in the middle throw me an error E1001 Error 1 and semi brick my phone, when I choose restart it literally throws me back to Fastboot.
Did anyone encounter the same fate? Or maybe my update file got corrupted?
Any ideas how can I fix this and have the last update installed for this ROM?
Thank you!
Click to expand...
Click to collapse
Try August 1st update. Dev quickly fixed it probably after 31st July build.

Where can I download that? on the webpage the last build with GAPPS is the 31st
Thanks for the reply

I just redownload the update for the 31st with GAPPS and now booted like a charm.
I believe my OTA Updater file got corrupted or something like that.

SebixWolf said:
I just redownload the update for the 31st with GAPPS and now booted like a charm.
I believe my OTA Updater file got corrupted or something like that.
Click to expand...
Click to collapse
Nice to hear that. Sometime, updating directly from phone turn out disaster (4 from 5 in my case). Thus I prefer to download the build in the PC then do the update manually. Please note that it may caused by my network stability also.