Hi guys,
for some reason after I did update to KangVIP I can't get rid off it. Besides I got no wifi and bt and I was going to start over with b023 as suggested but at this point I wont bother anymore.
I did wipe the system, I did advanced wipe using twrp but no matter what I do none of the stock firmwares are going through however the Kanga one always goes through.(KangaVIP goes through only in TWRP)
twrp 2.8.7.0
wipe
advanced wipe
I select all the partitions
mkdosfs process ended with error=1
unable to wipe /usb
unknown mtp message type: 1
unable to wipe /usb
I go back, restart to fastboot, (device is saying there is no OS installed), I restore the recovery, create dload folder on my sdcard, put there 028 (actually I tried all of them already), volume+ volume - power and I get error.
What am I missing ?
Anyone can help ?
Thanks in advance.
Eric
First you did a OTA from B029 to B209?
If so you are now on a Android 6 ROM you cant go back to Android 5 without a Rollback from Huawei.
Hirs_E_Fruit said:
First you did a OTA from B029 to B209?
If so you are now on a Android 6 ROM you cant go back to Android 5 without a Rollback from Huawei.
Click to expand...
Click to collapse
Yes I did then I wiped everything and started with b028 again.
Same thing, wifi didn't work same with BT.
Wipe again and this time I did local update and since the local update I can't go back not even b029.
77Eric77 said:
Yes I did then I wiped everything and started with b028 again.
Same thing, wifi didn't work same with BT.
Wipe again and this time I did local update and since the local update I can't go back not even b029.
Click to expand...
Click to collapse
Right now you are on a Android 5 or Android 6 ROM?
If you on a Android 5 ROM you can force update a Complete ROM to install a clean system and try if everything works.
Hirs_E_Fruit said:
Right now you are on a Android 5 or Android 6 ROM?
If you on a Android 5 ROM you can force update a Complete ROM to install a clean system and try if everything works.
Click to expand...
Click to collapse
I'm stuck on 6.0
I know I can do force update on 5.0 I said it above I just can't do it with 6.0 -> b029, only with your rom.
Anyone else is having this issue ?
The Kanga rom got a quite few problems no wifi and not BT, Google play services crashing (this can be fixed with gapps) my co worker just tried it with his own methods and same issue. After I went through the whole Kanga thread 60% of the posters got problems most of them are ignored.
I don't have any problems but I think the people with problems are people who have a DAV 701L.
Hirs_E_Fruit said:
Right now you are on a Android 5 or Android 6 ROM?
If you on a Android 5 ROM you can force update a Complete ROM to install a clean system and try if everything works.
Click to expand...
Click to collapse
Hirs_E_Fruit said:
I don't have any problems but I think the people with problems are people who have a DAV 701L.
Click to expand...
Click to collapse
I got DAV-703L, just simple question, why is the wifi and bt not working ?
When I get into Kanga I can remove the root or deny access to it is there a way to ditch it ?
Yeah I know it's working for you and it's not working for 10 other people including 703L owners. There is something wrong with the rom no doubt about it.
77Eric77 said:
I got DAV-703L, just simple question, why is the wifi and bt not working ?
When I get into Kanga I can remove the root or deny access to it is there a way to ditch it ?
Yeah I know it's working for you and it's not working for 10 other people including 703L owners. There is something wrong with the rom no doubt about it.
Click to expand...
Click to collapse
I think there was an error while flashing and without a full clean Rom flash i can't see a solution.
Before I got it to work I flashed it more than 3 times and everytime everything worked so I think don't think the ROM is that bugged.
Hirs_E_Fruit said:
I think there was an error while flashing and without a full clean Rom flash i can't see a solution.
Before I got it to work I flashed it more than 3 times and everytime everything worked so I think don't think the ROM is that bugged.
Click to expand...
Click to collapse
The first rom you introduced is working "fine" I get the wifi and bt no problem but once I switch into the latest build it's gone.
Any idea where can I get full clean Rom ?
This one is a no go http://www.needrom.com/download/p8max-dav-703l/
I managed to rollback to 5.1.1 but when I try to force flash it, it says it's not compatible.
If you don't update properly to B209, when you flash any B209 rom you are going to run into issues such as the wireless Bluetooth and sim card switching for some. If you properly updated the dload method should have completed successfully. Look at the kernel and radio version of B209 in About phone and compare it to others and see if they match.
ajsmsg78 said:
If you don't update properly to B209, when you flash any B209 rom you are going to run into issues such as the wireless Bluetooth and sim card switching for some. If you properly updated the dload method should have completed successfully. Look at the kernel and radio version of B209 in About phone and compare it to others and see if they match.
Click to expand...
Click to collapse
I don't want to use your rom even if you removed the Chinese it's still inside the system. Boot load times take much longer. Unexpected crashes. I did try it on 4 phones with OTA and local updates 2 are working but the Kang does crash twice a day minimum.
All what I'm asking is how to restore it to it's original settings, this was my worst mistake ever.
What I'm trying to say if I do something I do it properly just look at your thread 85% failure ratio that doesn't look like it was done properly does it ?
77Eric77 said:
I don't want to use your rom even if you removed the Chinese it's still inside the system. Boot load times take much longer. Unexpected crashes. I did try it on 4 phones with OTA and local updates 2 are working but the Kang does crash twice a day minimum.
All what I'm asking is how to restore it to it's original settings, this was my worst mistake ever.
What I'm trying to say if I do something I do it properly just look at your thread 85% failure ratio that doesn't look like it was done properly does it ?
Click to expand...
Click to collapse
Really dude?? No worries, it will be the last time I do anything for the P8Max. Maybe you should just sell the phone since you're having all sorts of issues with it....or maybe you should have left it totally stock then. Or maybe read through the Mediapad X2 forums because the two phones are very similar.
Related
Hi,
I did something stupid - I wanted to update my phone by creating a dload folder on internal memory and updating to EMUI 4.0 beta that's floating around on the internet (I got it from carbontesla). I knew it required a B326 version, I had B324 and still went through with it, because I mistakenly thought that B326 is only required for L10 (I have L09). Now the phone is stuck in bootloop.
I have tried the following:
1. Forced update - it was apparently successful, but still the phone kept resetting
2. I reset to factory settings and wiped cache - still keeps resetting
3. I tried to force update again, this time I get an 'update failed' info and asks me to reboot. Still the same.
4. Tried to reset to factory settings and wipe cache again - still no luck.
I can't even turn the phone off, so for now I keep it in recovery mode.
Any idea what can I do? Am I screwed for good?
I searched around on XDA and other forums but couldn't find anything - if anyone can help me, I will be very grateful. I just bought this phone 3 months ago and I can't afford a new one at the moment.
Khasim83 said:
Hi,
I did something stupid - I wanted to update my phone by creating a dload folder on internal memory and updating to EMUI 4.0 beta that's floating around on the internet (I got it from carbontesla). I knew it required a B326 version, I had B324 and still went through with it, because I mistakenly thought that B326 is only required for L10 (I have L09). Now the phone is stuck in bootloop.
I have tried the following:
1. Forced update - it was apparently successful, but still the phone kept resetting
2. I reset to factory settings and wiped cache - still keeps resetting
3. I tried to force update again, this time I get an 'update failed' info and asks me to reboot. Still the same.
4. Tried to reset to factory settings and wipe cache again - still no luck.
I can't even turn the phone off, so for now I keep it in recovery mode.
Any idea what can I do? Am I screwed for good?
I searched around on XDA and other forums but couldn't find anything - if anyone can help me, I will be very grateful. I just bought this phone 3 months ago and I can't afford a new one at the moment.
Click to expand...
Click to collapse
Experienced all. Tsk. Should have stayed away from the Marshmallow upgrade thread.
Khasim83 said:
Hi,
I did something stupid - I wanted to update my phone by creating a dload folder on internal memory and updating to EMUI 4.0 beta that's floating around on the internet (I got it from carbontesla). I knew it required a B326 version, I had B324 and still went through with it, because I mistakenly thought that B326 is only required for L10 (I have L09). Now the phone is stuck in bootloop.
I have tried the following:
1. Forced update - it was apparently successful, but still the phone kept resetting
2. I reset to factory settings and wiped cache - still keeps resetting
3. I tried to force update again, this time I get an 'update failed' info and asks me to reboot. Still the same.
4. Tried to reset to factory settings and wipe cache again - still no luck.
I can't even turn the phone off, so for now I keep it in recovery mode.
Any idea what can I do? Am I screwed for good?
I searched around on XDA and other forums but couldn't find anything - if anyone can help me, I will be very grateful. I just bought this phone 3 months ago and I can't afford a new one at the moment.
Click to expand...
Click to collapse
Uh-oh... Another Mate 7 phone bricked by the Marshmallow beta B511 update...
I guess you'll just have to wait for the full official marshmallow update (no longer beta) for your TL09 phone for your region, or at least, wait for the official TL09 marshmallow to lollipop downgrade package for your region. When Huawei releases one or both, then you can install one or both via forced update (power + volume up + volume down) and have a functioning phone again.
For now, there's nothing you can do but wait and wait... unless you know your way around rooting, unlocking bootloaders and custom ROMs. There are actually quite a lot of Mate 7 owners in the similar situation as you. If only you can BAND together with a common cause/objective, your 'bricked by Marshmallow B511' group could somehow be a FORCE to reckon with that Huawei cannot ignore. Your group can petition Huawei with emails to release at least the 'marshmallow to lollipop downgrade package' for other non-China regions NOW, or the EARLIEST humanly possible...
You may want to read other users similar experiences with their bricked mate 7 phone (by installing the beta marshmallow b511 update) here: http://forum.xda-developers.com/mat...-marshmallow-b511-t3304178/page2#post65176950
It will make you feel much better knowing you are not alone. Alternately, you can just vent out your frustrations to Huawei in another thread. Not sure if its allowed in XDA though.
Those with bricked mate 7 phones:
Can you try and see if this suggestion works?
=========== (quoted from http://www.carbontesla.com/2016/01/download-ascend-mate-7-b511-marshmallow-ota-zip/) by wissam marrash
wissam marrash • a day ago
Guys I have mt7-l09 and its working with marshmallow, yes it drains more battery and some lagging in some areas but this should happen because its a beta and incremental release. For people who got spoil their phone while installing, you should read the requirements very well before downloading this rom. Its clearly mentioned for B326 and for un-rooted phones. so before you install you should install the B326 (you can download using this link: http://m.huawei.com/pkmobile/c... make sure to choose mt7-l09 or mt7-l10 and after installing the B326 install marshmallow beta.
For people who wants to downgrade, yes you can but you have to choose a full release like the B326-B327-B328.
N.B. ONLY Marshmallow BETA rom, Don't unzip the after downloading, its not like the other updates. You should copy the zipped file as is to inside "dload" folder.
Just a tip, some releases are not supporting 4G lte especially when it marked Europe.
For people who keep rebooting, try to connect you phone to pc or take out the memory card and use card reader and access your files and then delete the files from the "dload" folder and then download using your pc any full release rom (b326 or b327 or b328) and extract it and then copy the "UPDATE" file to the dload folder and then turn off the phone and then boot your phone while holding Vol up + Vol down + Power buttons at same time to automatically trigger the update installation and should go smooth.
Hope my comments will help
==============
Here are the links to full ROMs:
TL10: B326 full ROM:
http://consumer.huawei.com/pk/support/downloads/detail/index.htm?id=62450&key4=MATE7
L09: B326 full ROM:
http://consumer.huawei.com/pk/support/downloads/detail/index.htm?id=62371&key4=MATE7
reboot
Hi Don
We tried to follow Wassim's nstructions unfortunately it didn't work. As you said there are so many mate 7 users' faced this problem.
Any way thanks a lot for your attention.
maksudbek said:
Hi Don
We tried to follow Wassim's nstructions unfortunately it didn't work. As you said there are so many mate 7 users' faced this problem.
Any way thanks a lot for your attention.
Click to expand...
Click to collapse
i had that problem when tray to update it to MM tray it all the way no LUUUUUUUUCK
last i went to the Huawei Services the joke is they also can noooooooooooot do anything ??
last they decide it to change the main board of the phone then .. phone start with KK after that no problem
but i will never ever buy this brand again !!!!!!
Here's to hoping someone can help me out. My phone details before I messed up: LG G3 D850, rooted, TWRP 3.0, running Fulmics 5.2 for about 1 1/2 weeks
I noticed that I was not seeing the LTE indicator on my phone. I checked the HUB and saw the BootD850-30012016 data patch and figured that I just needed to install. So I flashed it and my phone wouldn't start. I was able to boot into recovery, so I figured I would do a clean install of the ROM so I did a full wipe, accidentally wiping EVERYTHING except for my external SD.
Result was that I can access TWRP but am unable to flash any of my backups or zips from my external SD, or OTG. I can see the files, but don't have the option to "swipe". I also am unable to 'mount' or 'install'.
At this point, I noticed that AT&T has finally released the OTA for Marshmallow, so I figured I would just use LG FlashTool and totally un-root and give the update a try. (BTW, I have used the flash tool many times with no problems/issues on both my phone and my son's D855).
Unfortunately, I am getting the dreaded "unable to change to download mode" after 15 seconds. I have uninstalled and re-installed Flash Tool, the LG Drivers and all files and used every port on both of my computers (Windows 10 btw) but can't get past the download error.
So...after many hours of digging, I took a leap of faith and was able to sideload Fulmics 5.1 successfully and install the 5.2 update from the HUB. I made backup of the ROM but TWRP still won't allow me to "swipe" and install/restore. I reinstalled TWRP using Flashify and it installed version 2.8 but still no go on flashing from recovery.
I realize that I'm lucky to have been able to figure out how to get the phone back using the sideload function in TWRP, but I really do want to go back to stock and it bugs me that I am unable to use my backups.
Sorry for the novel, but I wanted to be sure to include everything I did....if anyone can help me out I would be much obliged. My 11 year old is anxiously waiting on me to figure this out before she gets this phone (I'm moving up to the HTC 10 in a couple of weeks!). She still thinks I'm 'SuperMommy' so if I can fix this I get to keep my swagger!
I was also running fulmics 5.1 and updated to 5.2 in my phone but now i was having pretty good laggs and i finally realised that the update provided by the phone was corruped so i went on the official site and downloaded the same 5.2 OTAs from there and flashed it into TWRP recovery to finally get the latest version 5.3..know that is it always advisable to flash zip file when in recovery mode using TWRP recovery...The big mistake was cleaning also the internal memory of your phone.this caused the malfunction of twrp.
The issue is that most often i have seen cases of lagg in those updating to fulmics 5.2 from the Hub .sometimes in twrp recovery the update files will not successfully wipe and then reboot system with 5.2 installed but with many lagg the file downloaded there may be corrupted and not give you permission to swipe..if you really like fulmics and still update to the latest..Try this it may help you solve your problem:1 reinstall the fulmics 5.1 go to xdadevelopers.com/fulmics follow the link given by xpirit to www.fulmics.com and download the OTA 5.2(file size maybe 46 mb).. 2.reboot your phone now in twrp recovery it should now be able swipe and install..(if not then install Twrp 3.0 and try) 3-search the files in your internal memory or wherever you have downloaded it and flash it ..4.reboot system.That should be done!! In case you want to come back to stock and cant install from Twrp then the problem is with Twrp just download the latest version that goes with your phone.
Thanks guys for the suggestions. I finally figured it out after a couple days of sweating and swearing. Yaneddik, you were spot on about updating from the Hub. I ended up installing TWRP 2.8.6 and re-installed 5.1 from the Fulmics website along with the updates. Everything has been working great (except for losing LTE connectivity, but that's for another thread!). I'm not inclined to update TWRP to 3.0 unless absolutely necessary, 2.8.6 works just fine for me.
dcli23 said:
Thanks guys for the suggestions. I finally figured it out after a couple days of sweating and swearing. Yaneddik, you were spot on about updating from the Hub. I ended up installing TWRP 2.8.6 and re-installed 5.1 from the Fulmics website along with the updates. Everything has been working great (except for losing LTE connectivity, but that's for another thread!). I'm not inclined to update TWRP to 3.0 unless absolutely necessary, 2.8.6 works just fine for me.
Click to expand...
Click to collapse
Am a newbie here but a long time rooter on my older phones. This is the first time that I've seen the Hub mentioned. Can you kindly post a link?
TIA
Sent from my LG-H810 using Tapatalk
SofaSpud said:
Am a newbie here but a long time rooter on my older phones. This is the first time that I've seen the Hub mentioned. Can you kindly post a link?
TIA
Sent from my LG-H810 using Tapatalk
Click to expand...
Click to collapse
Hey there....you can access the Hub after you flash the Fulmics ROM. It's where you can get your tweaks, downloads, mods, etc. You'll find it in your app drawer.
I have tried quite a few ROMs, and all ended up going back to stock firmware because they wouldn't boot. I know I have to format data, and some ROMs ask you to change the data partition as f2fs.
Still, I think that there may be no ROMs that currently work for the US variant. One guy said LOS 13 worked, but when I flashed it, it failed. If someone has gotten it to work, can you please post as many steps as you remember on how to get it work?
Debrand to BLN-L21 following this guide and you're ready to flash cooked ROMs https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
RedSkull23 said:
Debrand to BLN-L21 following this guide and you're ready to flash cooked ROMs https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
Click to expand...
Click to collapse
Thanks, but wouldn't there be more issues down the line with a debranded phone? What if I soft-bricked my phone, it seems like it'd be really hard to restore? Has anyone actually ever done this on a BLN-L24?
Hello all,
I too am having issues with flashing roms to this device, US variant (BLN-L24). In my particular case, the rom boots up (EliteRom v7.1) and will actually function. However, wifi does not work, as well as I have no sound whatsoever. Youtube also will not play, nor will any videos, which I'm guessing is tied to whatever issue is with the sound. I have flashed multiple times per the step by step instructions, as well as following the Youtube video, all with the same result over the last few days. At this point, my phone is effectively useless to me, though cellular data does still work, just no calls can be answered. Anyone have any suggestions I might be able to follow? Also, even my TWRP backup that I made before installing the rom will not restore at this point. Any help is appreciated, thanks.
Jessooca said:
You must be missing a step or something, because [Elite ROM][EMUI 5.1] Elite ROM v7.1 for Honor 6X by HassanMirza01 works on the L24 us variant without issues, I have none.
Perhaps go back to stock and start over. I haven't had any issues with his rom and I didn't do anything more than what's needed to root/install twrp and flash the rom per his instructions.
Click to expand...
Click to collapse
I just followed the instructions; I believe to the best I could, and I'm stuck in a bootloop now. Which version of EMUI were you on before flashing? I was on EMUI 5.0 which may be my issue.
I started from EMUI 5.0
Unlocked my bootloader
Let it factory reset
Installed the Elite TWRP on the page
Booted to Elite TWRP
Formatted all partitions excpet for external sd card
Reformatted Data to f2fs
Re-wiped data
Checked that it was f2fs
Installed Elite ROM zip
Installed open gapps 7.0 ARM64
Installed the patch
Rebooted
Bootloop
i4ybrid said:
I just followed the instructions; I believe to the best I could, and I'm stuck in a bootloop now. Which version of EMUI were you on before flashing? I was on EMUI 5.0 which may be my issue.
I started from EMUI 5.0
Unlocked my bootloader
Let it factory reset
Installed the Elite TWRP on the page
Booted to Elite TWRP
Formatted all partitions excpet for external sd card
Reformatted Data to f2fs
Re-wiped data
Checked that it was f2fs
Installed Elite ROM zip
Installed open gapps 7.0 ARM64
Installed the patch
Rebooted
Bootloop
Click to expand...
Click to collapse
On one of the attempts that I did for installing, I installed the patch and it put me in a boot loop. Maybe not installing the patch can help you?
I cant get anything to work for the US version. Sure stuff boots but some of it is just broken. On octOS i am unable to use root unless i switch supersu to automatically grant root to apps. I cant get root access by using prompt because nothing pops up. On crdroid i have the same exact issue. Id rather have the prompt than allow any app root access without my knowledge. With ELITE ROM my first boot brings up a home screen with no keyboard. It completely skips any kind of setup screen. I can get the setup screen by flashing a keyboard from an aroma gapps installer but then i lose google services. The US version also seems to be forgotten as for most roms you wont see it anywhere under supported lists.
I've never been able to get a custom rom to work on my BLN-L24. Everything just ends in a never-ending bootloop of frustration.
Though, I have only ever tried with EMUI 5.0+. Maybe an earlier version of EMUI gets better results...?
code_name_duchess said:
I've never been able to get a custom rom to work on my BLN-L24. Everything just ends in a never-ending bootloop of frustration.
Though, I have only ever tried with EMUI 5.0+. Maybe an earlier version of EMUI gets better results...?
Click to expand...
Click to collapse
It really sucks that nothing seems to work. Ive tried flashing using multiple recoveries and ive tried all kinds of flashing to fix issues with the ROMS. Nothing helps. If anyone has successfully gotten a ROM fully working on BLN-L24 they need to tell people exactly what they did step by step.
It seems that for the roms located here, they seem to all assume that the phone has been debranded to bln-l21 variant. I don't know if it has any bearing on the current issues we're all experiencing, but I did notice that all twrps available for this device on the forums state they are the "Open Kirin Edition". It's been a while since I've rooted or rom'd a phone besides this one, but I've never encountered a twrp with a custom name like that.
I know that the developer of the EliteRom had his custom twrp, but is there a different twrp besides that one that does not state it is an "Open Kirin Edition"? Like I said, not sure if it has any bearing on things here, but I've been very confused about that.
TurtlePwr82 said:
It seems that for the roms located here, they seem to all assume that the phone has been debranded to bln-l21 variant. I don't know if it has any bearing on the current issues we're all experiencing, but I did notice that all twrps available for this device on the forums state they are the "Open Kirin Edition". It's been a while since I've rooted or rom'd a phone besides this one, but I've never encountered a twrp with a custom name like that.
I know that the developer of the EliteRom had his custom twrp, but is there a different twrp besides that one that does not state it is an "Open Kirin Edition"? Like I said, not sure if it has any bearing on things here, but I've been very confused about that.
Click to expand...
Click to collapse
For most phone i've ever owned you never had to change the recovery for each ROM. Its confusing. Most recoverys say Open Kirin Edition when booting. What confuses me is why we need to debrand to get the ROMS to work. If the phone pretty much run on the same hardware then why is L24 having so many issues? Why are the devs not testing on these devices?
BakedOnSomeSour said:
For most phone i've ever owned you never had to change the recovery for each ROM. Its confusing
Click to expand...
Click to collapse
Right, that's what I was thinking. For any phone I've ever rom'd, there was always just one twrp that everyone worked from.
Edit: found this while looking through the roll back to stock forum. I don't know if it will help anyone else, but figured I'd put it here as well if it might. All credit for this goes to the original poster johnnyrichter:
johnnyrichter said:
Tried this method after being on LineageOS for a week or two and having poor LTE signal, no MMS, and voicemail issues so I'm trying to go back to stock so I can have a fully functional phone since I rely on it heavily for work. Followed all steps using BLN-L24 B360 firmware. On step 10 I rebooted to update and it went right to "5% Installing Update" and stuck there for 5 mins, then rebooted itself, has been sitting at "honor" boot screen for 14 minutes so I made it reboot to EMUI recovery, wiped/factory reset, rebooted, loaded EMUI afte 2 more minutes. Appears to have worked and hopefully my issues are fixed!
Edit: Signal, mms, and voicemail issues fixed.
Click to expand...
Click to collapse
Hopefully will benefit someone here as well.
When debranding the BLN-L24, and branding it to BLN-L21, are there any issues with the ROMs once they're installed? I imagine the radios, and such are different for the two models??
BakedOnSomeSour said:
Why are the devs not testing on these devices?
Click to expand...
Click to collapse
Devs can only test devices they have in possession. If they don't have your phone model, how are they going to test it?
galapagos said:
Devs can only test devices they have in possession. If they don't have your phone model, how are they going to test it?
Click to expand...
Click to collapse
well, many don't want to give them a phone because most developers here tend to stop work on a ROM and leave people hanging.
I have gotten several ROMs working on L24 variant...
Yes it seems to me any Elite kernel based ROM works or should work on the L24. But /data must be ext4 format. Then even that the ROM works, the fingerprint scanner never allows a complete successful scan. I think because it must be f2fs format for that encryption to work or something. This is the link to those ROMS https://hassanmirza01.blogspot.com/p/custom-roms.html?m=1
On the other hand the LOS based ROMs never work or at least they reboot and the screen is always black or the ROM branding just stays there flashing. This sucks cause I want to run the newest Resurrection ROM but I ask the developer about why I have that problem or how long that ROM takes to boot and I never get an answer. He also just put a new beta AOKP ROM up and it does the same black screen thing too.
I am also suspicious it has to do with the version of TWRP. I think some are capable of formatting f2fs correctly or the encryption or whatever. Point is some of the devs need to be a little more consistent answering questions at a minimum. I know it takes time to fix bugs but give us a little heads up.
I have recently changed phones and given my Honor 8 to my daughter.
She loves things like snapchat and other social apps.... She is in high school....
Come to find out my rooted stock, with Xposed TWRP , does not like things like snapchat.
So figured would flash newest Oreo on it or a custom rom , then probably do a magisk install. At least that would give me some root options.
Problem is I have tried updating via updater, that didnt work.
And hear that Honor 8 has bootloader lock issues (Found out how to do this from XDA so that may not be an issue).
TWRP (at least the version I have) does not do a nandroid backup.
I would like to save the apps on there but do have them backed up with TB.
I do NOT want to screw up the process of updating and want to do it best and easiest way possible.
What are my best options for doing this ?
Thank you
eracet said:
I have recently changed phones and given my Honor 8 to my daughter.
She loves things like snapchat and other social apps.... She is in high school....
Come to find out my rooted stock, with Xposed TWRP , does not like things like snapchat.
So figured would flash newest Oreo on it or a custom rom , then probably do a magisk install. At least that would give me some root options.
Problem is I have tried updating via updater, that didnt work.
And hear that Honor 8 has bootloader lock issues (Found out how to do this from XDA so that may not be an issue).
TWRP (at least the version I have) does not do a nandroid backup.
I would like to save the apps on there but do have them backed up with TB.
I do NOT want to screw up the process of updating and want to do it best and easiest way possible.
What are my best options for doing this ?
Thank you
Click to expand...
Click to collapse
hi
since 7-8days ago, Firmware finder server is down and we dont have access to it links so, you should wait for it to get back online and use oreo links
but the best instruction i have find is this one :
https://forum.xda-developers.com/honor-8/how-to/guide-flashing-unapproved-firmwares-t3668306
Snapchat fails because it detects root and xposed. So you could just use magisk hide and delete xposed.
agraceful said:
Snapchat fails because it detects root and xposed. So you could just use magisk hide and delete xposed.
Click to expand...
Click to collapse
Yes I tried that , but didnt work right. So deciding on just flashing the entire thing over to Oreo.
One of the things I am wondering is what happens if I do a data wipe, and full Oreo flash from TWRP. Will it work or mess things up.
I finally have a hold of the phone today. so doing a full TB right now.
Trying to get a phone out of a hands of a teenager......
oops is EMUI 4.1
eracet said:
Yes I tried that , but didnt work right. So deciding on just flashing the entire thing over to Oreo.
One of the things I am wondering is what happens if I do a data wipe, and full Oreo flash from TWRP. Will it work or mess things up.
I finally have a hold of the phone today. so doing a full TB right now.
Trying to get a phone out of a hands of a teenager......
oops is EMUI 4.1
Click to expand...
Click to collapse
I flashed firmware over from Huawei website. and now it is on stock , all with apps staying, no root and stock recovery and locked.
When doing an update VIA settings it tells me everything is up to date.
Will keep working with it ,
Need not to try to do shortcuts and take my time instead. May learn something....
Looks like latest official update is EMUI 4.1 /android 6 Is that right?
why is no one discussing stable android 11 for op7p ? got my update round 3 a.m. this morning. been searching all day for a working twrp since the stable android 11 been released. no luck though......
Hi,
Today I installed the update manually and my phone keeps flashing the TWRP load-screen at boot. It's stuck now. Is that because there is no compatible TWRP version yet? How do I fix this?? Any idea?
There is no working TWRP yet for Android 11. You'll need to flash the stock boot.img or rooted boot.img from one of the threads in the news, guides section.
Edit: TWRP screen flashing is because it's incompatible. I had the same issue on the open betas.
Have the exact same issue as above, Twrp screen flashing, cannot boot back to normal even with adb... anybody has a rooted boot.img link that knows works with Android 11?
Should have checked on xda first *slaps his face*
Always check xda first *slaps his face again*
EDIT: For other poor saps with this issue use this -> https://www.androidfilehost.com/?fid=2188818919693770594 I didnt managed to get booted with rooted img but the original boot img file worked well ... at least I got a phone now...
im on 10.3.8 and rooted..
can i just do the same old process.. twrp isnt an issue as long as may apps are safe and root..
santiagoruel13 said:
im on 10.3.8 and rooted..
can i just do the same old process.. twrp isnt an issue as long as may apps are safe and root..
Click to expand...
Click to collapse
No, its not the same process.... For me for example I couldnt get wifi to actually work on rooted image AND you lose the ability to do backups via TWRP..... Refer here for the latest on this: https://forum.xda-developers.com/t/...p-recovery-for-oneplus-7-pro.3931322/page-153
dejjem said:
No, its not the same process.... For me for example I couldnt get wifi to actually work on rooted image AND you lose the ability to do backups via TWRP..... Refer here for the latest on this: https://forum.xda-developers.com/t/...p-recovery-for-oneplus-7-pro.3931322/page-153
Click to expand...
Click to collapse
I mean.. same steps.. that ive used so far amd retain its root.
1. Download rom via o2 updater
2. Flash it via local update
3. Install magisk to inactive slot
4. Reboot.
So if i do this.. wifi wont work??? Is that it???
Finished updating my phone..after downloading it for about 2 hours.
And im quite satisfied with the results. No problems whatsoever..
Glad for you... You probably had already removed the encryption on your mobile... from what I'm reading that is the main incompatibility issue with TWRP...
FWIW after playing around for a day, I had to revert everything Phone wifi was weird (weirder with root and all mods disabled) and system was a little unstable in some 3p apps and there seems to be some bugs with the phone screen 60/90 refresh... Gonna wait a bit to update again.
dejjem said:
Glad for you... You probably had already removed the encryption on your mobile... from what I'm reading that is the main incompatibility issue with TWRP...
FWIW after playing around for a day, I had to revert everything Phone wifi was weird (weirder with root and all mods disabled) and system was a little unstable in some 3p apps and there seems to be some bugs with the phone screen 60/90 refresh... Gonna wait a bit to update again.
Click to expand...
Click to collapse
i dont mind not having TWRP for the meantime,, i just used TWRP previously for flashing CUSTOM kernels.. hehehehe.
anyways, what problem have you encountered regarding wifi?? i dont seem to experience those,, maybe because i came from stable oos 10.3.8..
what app crashed and problems have you encountered???