does anybody know whats goin on with this issue?...crb9 update keeps getting interruptedand the phone reboots
Mine does the same with brb1, now when I try to update it says I'm up to date
hmm..im also on brb1...wonderr if thats the issue?
I was getting stuck at 24% as well. I did this and it worked for me coming from december 2017 update. I downloaded tje update over wifi. I then turned off wifi and had data going. I plugged the phone into charger and went to settings > software update and the option to continue appeared and I was able to update it no problems. Hope this helps
My father's S8+ is doing the same thing here, gets to 24% and fails. I tried the above method of disabling wifi and charging during install, but that didn't work.
I was about to get a logcat to upload but now it's saying it's up to date when I check for updates. I'm also on version BRB1
i went back to L1...but i dont think thats the issue...mines worked after a similar method...i restarted the phone after it was finished downloading...and it went pass 25%...i was about to give up to...i was like..screw this..completed...feels good...so i guess everyone has their own trick...maybe 1 might work
Sent from my SM-G955U using XDA-Developers Legacy app
I had the same issue but worked around it. Here is what I did.
1. Download BQL1 to SD Card and BRB1 to SD Card
2 Odined back to BQK5
3. When it goes to install this it will error out and install bql1. from SD Card
4. Installed BRB1 from SD Card
5. Did OTA update to Oreo.
It is kinda of a pain but it did work for me.
Good Luck
tenbender said:
I had the same issue but worked around it. Here is what I did.
1. Download BQL1 to SD Card and BRB1 to SD Card
2 Odined back to BQK5
3. When it goes to install this it will error out and install bql1. from SD Card
4. Installed BRB1 from SD Card
5. Did OTA update to Oreo.
It is kinda of a pain but it did work for me.
Good Luck
Click to expand...
Click to collapse
Whe you say you downloaded, where did you get your downloaded versions? I am not rooted, does this matter?
Homeuser66 said:
Whe you say you downloaded, where did you get your downloaded versions? I am not rooted, does this matter?
Click to expand...
Click to collapse
Sorry for the confusion.. I downloaded the BQK1 from a link found on this post. This download contained the files to use with Odin.
I believe that I got the other files from the Samsung Website.
I don't believe that rooting would be a problem but I am not rooted so I can't answer that with 100% certainty.
Ten
No confusion. Just wanted clarification. I'm not rooted, neither are you. I'll find the pay your referring to and try myself.
I flashed my phone with G955USQS2BQL1 and it updated just fine. It even did the March security update after the Oreo update.
need help
my galaxy s8+ Att sm-g955u can't update from firmware
G955USQU1AQC9 HOW CAN IUPDTAE TO OREO because I can't use bixby
please can someone help me
Related
Hello everybody, before all, I hope there isn't a thread already with this topic, if there is, my apologies.
I have an european (ww) stock rom Transformer on 3.1, I did the first update (3.0 to 3.1) manualy, it worked great, but now, its been since the 3rd of august (OTA 3.2 release date in France) that I've been waiting for my tranformer to receive the OTA, but it just won't.
I've tried to push the "search for update" button thousand times and reboot it almost everyday since then without result.
Do someone have had the same problem and solve it?
By the way, I don't have the keyboard dock yet; doest it play a role in my problem?
I bought my transformer 2 weeks ago i was in 3.1 and i had the update to 3.2 as soon my tab was connected on wifi. But i have the dock.
Are you sure that you never rooted your tab?
You can also ask asus france on their facebook page.
Yes I'm positive, unless the manual 3.0 to 3.1 update implied to root. But I'm quite sure it doesn't.
Apparently you are only offered the update once, if it fails it wont offer it again unless you delete a certain file
Not sure which one it is, but a factory reset should sort it if you can cope with wiping it
that's the odd thing, I wasn't offered it even once. I will search for the file you mentioned and in last ressort, go for a factory reset. But honestly I would prefer not to go that far. That's why I asked for other solutions.
Tried updated manually? ie downloading update from
http://support.asus.com/Download.aspx?SLanguage=en&m=Eee+Pad+Transformer+TF101&p=20&s=16
I've tried it too, I've followed the steps, I've put the "asus" folder on a micro sd card, put it in my transformer, but it did not detect the update, I've tried different ways to put the update folder on the sd card so that the tablet can find the update, but still, it didn't work. I just can't figure out why it doesn't want to update.
Thanks for your clues anyway, I will keep searching for a solution or a way to make this manual update...
If I find the thread with the location of the offending file, I`ll update this thread with it
Thanks, it will be very helpfull
seagle77 said:
Thanks, it will be very helpfull
Click to expand...
Click to collapse
You may already know about this forum, but Im beginning to wonder if the posts I am remembering are infact here
http://www.transformerforums.com
Great place either way
Yes great place indeed, i'll try to find it there
I had a similar issue. The tablet update section said 'There is an update available. Please check notifications'. The search for updates button was therefore greyed out. However, nothing ever appeared in the notifications.
I updated manually in the end. However, the update section remains the same: Telling me there is an update and not allowing me to check for any further updates. I'd really like to get this functionality working again.
OK can you please tell me wich folder did you put on the micro sd card for the tablet to detect the update?
Seagle77 go to settings/applications/manage applications/all and scroll down to DMClient click on it and hit clear data and clear catche if i remember right thats what i cleared when the ota failed to install for the first time, once you clear it u might have to restart but it should show you the ota notifiction after that, hope it helps.
V.
I tried it, but after the reboot, there is still no notification of the OTA and nothing more on the update menu.
Update.zip file you downloaded for manual update should go under /removable/microsd/update.zip try placing it there and seeing if u get the notification after a reset , if not then try booting into stock recovery and starting the update from there using update.zip
I've downloaded a file nammed "UpdateLauncher_WW_epaduser8659.zip" on asus website. Do I have to rename it before put it on the micro sd card, or leave it like this?
Ok, problem solved here, someone told me to check the update version on "transformerforum", and the origin of the bug was my first manual update, were I used the US update, istead of WW version.
Therefore, I just needed to update with the US 3.2 file and it worked perfectly.
Thanks for the help given here. Have a good one everybody
Enjoy 3.2 !
I was able to install the first of the two updates earlier for the 5.1.1 update on my Verizon Galaxy Note Pro 12.2. The second downloads, prompts for install, reboots and begins installing but errors out and reboots back into the OS home screen. The Verizon software update manager shows Failed software update error code 402. I have factory reset my tablet a couple of times and still same issue. I do not have my tablet rooted and no apps disabled.
I downloaded the latest available Samsung firmware md5 file, version VZW-P905VVRUANK1-20141205133604 and tried flashing using Odin 3.07 while in download mode. It starts and after a few seconds, Odin fails and on the tablet screen, I get the error, SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1. I have re-downloaded the firmware along with older versions and still same issue.
I was reading somewhere that my tablet could be "soft bricked" and that is why it will not install the second part of the OTA. As for the Odin/download mode error, I had read that the firmware version I am trying to flash in Odin has an older version of bootloader than my current and Samsung does not let you downgrade the bootloader. I may be wrong on both accounts, which is why I am seeing if anyone else has had this same issue or have any advice on what I can try.
Thanks in advance!
Same here. I unforze all the apps unintstalled SU and factory reset still no dice. VZW repair assistant wont work or smart switch. RA says device firmware not supported and smart switch says im up to date. The first part of the update installed no problem.
dansto82 said:
Same here. I unforze all the apps unintstalled SU and factory reset still no dice. VZW repair assistant wont work or smart switch. RA says device firmware not supported and smart switch says im up to date. The first part of the update installed no problem.
Click to expand...
Click to collapse
I had the exact same issues. Here's what I did with my 4.4.2 Rooted NP. I wiped it completely from within the device, then connected it and to the VZW software and let it do a "Repair". After that, my tablet also said that it was up to date, still on 4.4.2. I let it sit overnight and tried downloading the software update the next morning from the tablet, and it took both of them. My NP is rocking 5.1.1. now, much faster. No root but that's alright for now. By running the repair assistant from VZW, it also got rid of the Unlocked Symbol, which may have prevented the upgrade in the first place.
tdetroit said:
I had the exact same issues. Here's what I did with my 4.4.2 Rooted NP. I wiped it completely from within the device, then connected it and to the VZW software and let it do a "Repair". After that, my tablet also said that it was up to date, still on 4.4.2. I let it sit overnight and tried downloading the software update the next morning from the tablet, and it took both of them. My NP is rocking 5.1.1. now, much faster. No root but that's alright for now. By running the repair assistant from VZW, it also got rid of the Unlocked Symbol, which may have prevented the upgrade in the first place.
Click to expand...
Click to collapse
I was able to get mine to update using ODIN and the firmware file from sammoble. Factory reset on the tablet, factory reset in recovery and finally ODIN worked.
I was having the same problems as the OP listed. Once I decided to live without root and I would be okay with wiping the tablet, I performed exactly what dansto82 said he did and I'm now on 5.1.1.
Now hoping someone comes up with a way to root.
Hey, I have the p905v and it is running 4.4.4, I rooted it with towelroot and it was completely fine. I then tried putting twrp recovery on it the wrong way through flashify and now I don't have a recovery mode and can't update it to 5.1.1. Other than that the tablet runs perfectly fine. Is there a way I can fix it?
Sent from my SM-P905V using XDA Free mobile app
Note: This is the live update. Not Soak Test.
For U.S. update only.
Here is how to get your update prompt:
1) Put your phone on Airplane Mode
2) Turn on your Wi-Fi.
3) Unmount your SD card from the Settings.
4) Eject your SIM/SD card from the phone while your phone is still on.
5) Go to your Settings and check for an update. Your phone should detect the update and you will be able to download it.
I didn't find it full credit goes to: https://www.reddit.com/r/MotoX/comments/3w92rp/moto_x_pure_edition_how_to_update_to_60/
What to do wenn you get a error 7 message. If you followed these steps ?
This is how i did it
Pull sim card out
reboot phone
after phone rebooted, turn wifi on
go to settings, about phone, system update
Didn't worked for me.
Don't works.
Neither of these options worked for me. (UK)
The OP should really edit the title of this thread. Or at least state in the first post that it only works with US carriers/telco
It works on USA. I just got the chance to update this using the methods you have mentioned. I followed exactly what you said and it's working for me now.
Thank you
It worked for me(T-Mobile sim removed)
Out of curiosity, though, what is band 12? I'm having a bit of trouble understanding this whole situation with t-mobile. Can someone explain?
What version is this? 24.11.18.clark_retus.retus.en.US retus?
Confirmed works, I'm on Tmo. This is what I did, because I didn't read OP's instructions fully before doing it myself:
1. unplug sim
2. check for update, ensuring wifi is enabled
work for me
I'm on XT1575, no carrier, outside US
steps:
1. unplug sim & sd card
2. restart phone
3. enable wifi
4. check update
5. download!
Anyone do this while rooted? Do I need stock recovery?
JohnnyKilo said:
Anyone do this while rooted? Do I need stock recovery?
Click to expand...
Click to collapse
you need to be on stock recovery and stock rom. if you installed xposed or any mods, then the update may fail
I'm on a rooted 5.1.1 with custom recovery. this update should download but not install, correct?
jvs60 said:
I'm on a rooted 5.1.1 with custom recovery. this update should download but not install, correct?
Click to expand...
Click to collapse
You can't OTA with modified system (xposed, supersu, etc) or custom recovery.
Sent from my Moto XPE
JoeNeckbone said:
You can't OTA with modified system (xposed, supersu, etc) or custom recovery.
Sent from my Moto XPE
Click to expand...
Click to collapse
I suspected as much, thanks .
Latest OTA killed my WiFi. I dont have the receipt anymore and I might be screwed even though I only bought this tablet less than 3 weeks ago. Is there anyway to revert back to an earlier build. I'll do anything. Im not rooted or unlocked. Any help to fix this and I will donate to u I promise.
It looks like they are aware of the issue so I would wait a few days before freaking out. You can always push an update from your pc or SD card if it comes to it. My gf has the k1 and hers just has an update tonight that said it was fixing wifi issues. When did you install this update? What version was it?
Sent from my SHIELD Tablet using Tapatalk
TokedUp said:
Latest OTA killed my WiFi. I dont have the receipt anymore and I might be screwed even though I only bought this tablet less than 3 weeks ago. Is there anyway to revert back to an earlier build. I'll do anything. Im not rooted or unlocked. Any help to fix this and I will donate to u I promise.
Click to expand...
Click to collapse
You should be able to get the receipt reprinted at the store you got it from if you used a credit or debit card. Worse comes to worse I'm pretty sure Nvidia would be able to tell how old the unit is.
Im gonna go back to the store I bought it at tomorrow. I used my debit card so hopefully that will work. Thanks.
I just exchanged my K1 for a new one. Staying on 5.1.1 for a while. **** you Nvidia!
Mods please close
I took the OTA last night and had the WiFi problem. I was able to fix it by re-flashing the staging blob (source) and rebooting.
Incidentally, I switched to Bliss 6 and had the exact same issue, and solved it the exact same way. My guess is that the OTA didn't correctly patch the blob, but after all the work I have done today to try and get myself a working tablet who knows whether that was the root problem or not.
jeffober said:
I took the OTA last night and had the WiFi problem. I was able to fix it by re-flashing the staging blob (source) and rebooting.
Incidentally, I switched to Bliss 6 and had the exact same issue, and solved it the exact same way. My guess is that the OTA didn't correctly patch the blob, but after all the work I have done today to try and get myself a working tablet who knows whether that was the root problem or not.
Click to expand...
Click to collapse
Can I ask how you re-flashed this .img, I have had no wifi for 2 days now and am starting to get impatient waiting for a fix. Any help is appreciated, thanks!
roaming4gnome said:
Can I ask how you re-flashed this .img, I have had no wifi for 2 days now and am starting to get impatient waiting for a fix. Any help is appreciated, thanks!
Click to expand...
Click to collapse
I downloaded the file I linked to above, rebooted the tablet into the bootloader, and flashed it with fastboot (`fastboot flash staging blob.img`). There are plenty of tutorials already explaining how to boot into your bootloader and install adb/fastboot on your computer to accomplish this, so I won't fill up the Internet by duplicating it here.
Thanks! ya I'm familiar with the process, I decided to flash factory .img and back and running now
Bliss v6.0 Shield K1
jeffober said:
I took the OTA last night and had the WiFi problem. I was able to fix it by re-flashing the staging blob (source) and rebooting.
Incidentally, I switched to Bliss 6 and had the exact same issue, and solved it the exact same way. My guess is that the OTA didn't correctly patch the blob, but after all the work I have done today to try and get myself a working tablet who knows whether that was the root problem or not.
Click to expand...
Click to collapse
is it working for K1 tablet or original because my k1 have the same problem
I've had the same problem on my K1. (wifi)
A factory reset (launched by the android menu, not from bootloader) solved the problem.
It's long but it's normal.
Of course I had to set everything back, but my tablet was stock so I lost nothing.
Now it's rooted and everything is fine.
Toked, same issue. Was able to work around issue by turning on one of the options in developer mode. Turn on "use legacy dhcp client". Wifi back. Hopefully a permanent fix soon
Not meaning to necropost here, but turned on my shield after a long while off and had this same issue, changing to "use legacy dhcp client" worked! Thanks!
How to fix wifi
Step 1: Turn the Shield tablet off
Step 2: Remove SD card
Step 3: Turn tablet back on
WiFi should now be working
Step 4: Reinsert SD card.
Hi
Just to warn you, I tried to update my Nokia 3 with the last update AND I lost everything on my phone so don't install it.
:furieux:
>Taps< said:
Hi
Just to warn you, I tried to update my Nokia 3 with the last update AND I lost everything on my phone so don't install it.
:furieux:
Click to expand...
Click to collapse
What last update?
I installed the June security patch two weeks ago.
No problem and no loss of data.
I updated to android 8.0 Oreo from android 7.1.1 back in may, again no issues.
Oreo is much better than nougat in my own opinion.
Posts like this don't really help anyone because no one else has reported such an issue, with many even using third party VPN methods to get the update to 8.0.
I'm sure this is something else rather that a sinister update issue.
Take a look at all the other threads gor Nokia 3 and you will see what I mean.
I have been afraid to install the June update on my Nokia 3 since the last time I updated my rooted Nokia 5 had to flash OST and go through the whole process of updating and installing my apps again. Once I know have time to do any recovery, I will installl the OTA and fix whatever issues may come my way
EDIT : Apparently it's because I had a sd card merged with the internal memory :s
>Taps< said:
EDIT : Apparently it's because I had a sd card merged with the internal memory :s
Click to expand...
Click to collapse
This method of update does wipe internal memory too.
https://forum.xda-developers.com/nokia-5/development/how-to-install-oreo-8-1-v5-580-nokia-5-t3770725
I suggest editing you post title so not to put off anyone unnecessarily.
bubba1601 said:
This method of update does wipe internal memory too.
https://forum.xda-developers.com/nokia-5/development/how-to-install-oreo-8-1-v5-580-nokia-5-t3770725
I suggest editing you post title so not to put off anyone unnecessarily.
Click to expand...
Click to collapse
Thanks I will see that