IMPORTANT NOTE:
Please read the first few posts thoroughly before you proceed to do anything. Asking questions that can be found in first page will simply be ignored.
This thread is mainly for EXYNOS variant ONLY, some discussion about other variant is fine, but please keep in mind that I'm using an Exynos version and have no experience with SafeTrap/how Snapdragon version works.
For SNAPDRAGON variant, please go to this thread.
Click to expand...
Click to collapse
The FIRST standalone Samsung SoundAlive Dolby Atmos zip installer featured on XDA Portal, 17 July 2018https://www.xda-developers.com/dolby-atmos-samsung-galaxy-s9-galaxy-s8/.
Click to expand...
Click to collapse
Hi all,
Since no one has posted a standalone S9 Dolby Atmos flashable zip yet, so I just make one during my semester break.
Tested and confirmed to be working on GoogleWiz V81 - September build(CRI5), should work on other TouchWiz based ROMs(with stock audio) too. *Please test and let me know.
Here's something that you can use to test it:
The best way to test is to switch between music and movie mode.
Official Dolby Atmos Trailers
You can play the videos with VLC
Installation
Please note that the installer will not backup your current system files, it will just overwrite them directly.
It is recommended that you backup your current setup before you flash the zip.
It is also recommended that you restore your system's original files every time before you install an updated version of the libs installer.
[Dolby Atmos Libs & Files]
If you just want to update/enable Dolby Atmos without upgrading your SoundAlive app, you may flash the Dolby Atmos Libs installer only without flashing the SoundAlive apk zip.
You should still get Dolby Atmos enabled, just that some new functions might be missing from your pre stone age SoundAlive app, eg: Game Mode
[SoundAlive App]
If you wish to update the SoundAlive App, it is recommended that you follow the instructions below:
Uninstall SoundAlive updates in Settings
Install System app remover[ROOT] to uninstall SoundAlive
Flash SoundAlive installer zip
[For devices other than S8]
Below are some installation tricks that some users said to be working on their end, no one actually know if it is true, so do it at your own risk:
Galaxy S7 Installation Trick
Troubleshooting
Code:
logcat | grep SAEffectManager
Check if it at least returns something like this:
Code:
07-20 16:56:32.776 6454 6454 D SAEffectManager: *****getNewSoundAliveInstance start*****
07-20 16:56:32.833 6454 6454 D SAEffectManager: *****newSoundAliveEffect create Sucessfully*****
07-20 16:56:32.833 6454 6454 D SAEffectManager: *****getNewSoundAliveInstance end****
07-20 16:56:32.833 6454 6454 D SAEffectManager: *****getNewDolbyInstance start*****
07-20 16:56:32.835 6454 6454 D SAEffectManager: *****getNewDolbyInstance create Sucessfully*****
07-20 16:56:32.835 6454 6454 D SAEffectManager: *****getNewDolbyInstance end****
Post a clear screenshot/txt content of the logcat
Tell me what device are you using, which processor it uses and what Android version it runs
Give me some info about the ROM that you are using, like a link and a brief description about what the ROM based on.
*If you use some heavily modded ROM that modified the audio in any way (random audio mods, viper, etc), please keep in mind that they might not be compatible with my mod, I don't use nor I will try those mods and thus I won't be able to help.
*Please note that I won't be replying to questions in PM, questions in this thread without sufficient information will also be ignored.
Credits:
xpirt for his amazing work
SilentWorld for his findings to enable Dolby Atmos on speaker
foobar66 for his service.d script as ref
guitardedhero for his updater-script as ref
SoLdieR9312 for his S8 and S9 ROM
rifek4 on Telegram for saving me some time to extract vendor.img
And of course Samsung and Dolby
D0wnI0ad and ch4ngel0g
SoundAlive Apk Flashable Installer
You might have to uninstall current version first before you flash.
See 'Installation' on main post
Latest version - 9.1.06 - With new Game Mode
View attachment SoundAlive_9.1.06.zip
Click to expand...
Click to collapse
Dolby Atmos Libs Installer
V-1.7.0 (16 Dec 2018)
The installer now edits the audio_effects.conf instead of replacing the entire file.
V-1.6.0 (9 Dec 2018)
Added a line in floating_feature.xml that's supposed to enable Dolby Atmos on speakers regardless of the version of SoundAlive. Credit to @SilentWorld for his findings.
New set_floating.sh to edit floating_feature.xml dynamically instead of replacing the file for higher compatibility with other phones
Removed a few libraries that are related to SoundAlive but not directly related to Dolby Atmos to increase compatibility
Speaker volume should be as loud as stock since related files which might cause the problem have been removed.
Removed a few Dolby's AC4 & DDP files since I can't get them to work/I don't know how to test if they worked
EDIT: AC4 & DDP may require complete stagefright libs port to work
Further edited some Samsung props in Dolby Atmos's libs to increase compatibility
Added a file in services.d based on foobar66's script to (hopefully) enable Dolby and UHQ tiles automatically
V-1.5.1 (21 July 2018)
Fixed a typo in folder's name (/system/etc/permission , should be 'permissions'), will not affect ROM with SoundAlive pre-installed as they will have this file already.
V-1.5 (20 July 2018)
Added lib dependencies - Should increases compatibility with older devices
Updated SoundBooster parameters
Removed duplicated /system/lib/soundfx/libaudiosa.so
V-1.4 (18 July 2018)
Moved SoundAlive.apk to a separated zip
This zip now installs libs only.
V-1.3 (18 July 2018)
Updated Dolby Atmos and SoundAlive libs from SM-G965F BRF8(Same as BRG6)
Updated to SoundAlive v8.0.63
Dolby libs patched to not mess with original build properties, thanks to xpirt for showing that this is possible
Added libs missing from the previous version, now SoundAlive is fully using S9's libs properly
*For those who wonder how the lib patching is done
V-1.2 (17 July 2018) by xpirt
Fixed flashable zip with with patched libs.
V-1.1 (1 July 2018)
Updated some files.
V-1.0 (29 June 2018)
Initial release.
SoundAlive v8.0.55
Libs extracted from BRF8
(Almost)Complete Audio Libraries from S9+ BRG6
No difference in sound IMO, but here it is:
View attachment BRG6_AUDIO_LIBS.zip
Click to expand...
Click to collapse
Magisk Module
If you encountered any issues using this module, please report the issue in the module's thread instead.
I won't be able to help with Magisk module as I have no expertise in that. Reporting issues caused by the module without stating so wouldn't help you either even if I replied you since that reply might be irrelevant.
Magisk Module maintained by Electric1447
Information Section
Feel free to reuse my work in your ROM, MOD, whatever.
You do not need a permission from me. (Why should you?)
/system/build.prop
Code:
dolby.fake.model=SM-G965F
dolby.fake.device=star2lte
dolby.fake.brand=samsung
dolby.fake.manufacturer=samsung
/system/etc/floating-feature.xml
Code:
<SEC_FLOATING_FEATURE_AUDIO_CONFIG_SOUNDALIVE>52</SEC_FLOATING_FEATURE_AUDIO_CONFIG_SOUNDALIVE>
<SEC_FLOATING_FEATURE_MMFW_SUPPORT_DOLBY_AUDIO>TRUE</SEC_FLOATING_FEATURE_MMFW_SUPPORT_DOLBY_AUDIO>
<SEC_FLOATING_FEATURE_AUDIO_SUPPORT_PSEUDO_DUAL_SPEAKER>TRUE</SEC_FLOATING_FEATURE_AUDIO_SUPPORT_PSEUDO_DUAL_SPEAKER>
/system/csc/feature.xml
or
cscfeature.xml
in
Code:
<CscFeature_SystemUI_ConfigDefQuickSettingItem> </CscFeature_SystemUI_ConfigDefQuickSettingItem>
add
Code:
Dolby,UHQ
or in terminal, type
Code:
su
pm enable com.sec.android.app.soundalive/com.sec.android.app.soundalive.DolbyTile
pm enable com.sec.android.app.soundalive/com.sec.android.app.soundalive.UHQTile
to enable Dolby and UHQ Upscaler tiles in statusbar.
/system/etc/audio_effects.conf:
Add this within libraries{ }
Code:
# Dolby AudioEffect
dap {
path /system/lib/soundfx/libswdap.so
}
and this within effects { }
Code:
# Dolby AudioEffect
dap {
library dap
uuid 9d4921da-8225-4f29-aefa-39537a04bcaa
}
To patch the libs so that it doesn't require edits to original build properties lines, read this post.
/system/lib/soundfx/libswdap.so
View attachment 4552563
/system/lib64/soundfx/libswdap.so
View attachment 4552564
Libs
Code:
libmyspace.so -> lib_SoundAlive_3DPosition_ver202
libsamsungSoundbooster_plus.so -> lib_SoundBooster_ver900.so [Device Specific]
libaudiosaplus_sec.so -> lib_SoundAlive_play_plus_ver210.so
libaudiosa.so -> libswdap.so (ARM/ARM64) [Device Specific]
Not working just seen icon on quick setting
Iyaadali said:
Not working just seen icon on quick setting
Click to expand...
Click to collapse
What ROM?
It does not work for me, Soldier9312s Rom 6.0
Doesn't work on Renovate Ice
@OP, you wrong code in updater-script
You need edit
run_program("/tmp/mytweaks.sh", "mytweak");
To
run_program("/tmp/mytweaks.sh", "misc");
Are you sure it didn't work for you?
It did edit the build.prop correctly on my end.
Check if your build.prop ends with this after flashing the zip:
Code:
#
# DOLBY
#
ro.product.model=SM-G960F
ro.build.flavor=starltexx-user
ro.build.product=starlte
ro.product.name=starltexx
ro.product.device=starlte
@others
Try the attached video, switching between music and movie to hear the difference, if there's no difference, try to attach
Code:
logcat | grep Dolby
I installed it but can I activate it with my headphones is normal?
Works perfectly on Stock CRF7
Working only with headphones, bug?
artur_spetsnaz said:
Working only with headphones, bug?
Click to expand...
Click to collapse
Mi too [emoji22]
Envoyé de mon SM-G960F en utilisant Tapatalk
izimen said:
I installed it but can I activate it with my headphones is normal?
Click to expand...
Click to collapse
It only works with earphones and bt headset, won't work on speaker.
ImbaWind said:
It only works with earphones and bt headset, won't work on speaker.
Click to expand...
Click to collapse
It work without headphone, just replace sound alive apk l, i used the one from alexis rom
Ellcid01 said:
It work without headphone, just replace sound alive apk l, i used the one from alexis rom
Click to expand...
Click to collapse
Thanks a lot mate.
I get SoundAlive_52.apk from Alexis rom and replace it and everything is fine.
WARNING:Replace SoundAlive apk after flashing Dolby.zip.
If you don't do it,you lose true apk.
My advice to developer;change S8 SoundAlive.apk to bottom apk.
I add SoundAlive_52.apk from Alexis rom below.
EDIT:With this apk,dolby working for speaker.
Rex01 said:
Works perfectly on Stock CRF7
Click to expand...
Click to collapse
On non-rooted phone?
OP could you please merge the sound alive an the main dolby atmos in one package?
sefadrin said:
Thanks a lot mate.
I get SoundAlive_52.apk from Alexis rom and replace it and everything is fine.
WARNING:Replace SoundAlive apk after flashing Dolby.zip.
If you don't do it,you lose true apk.
My advice to developer;change S8 SoundAlive.apk to bottom apk.
I add SoundAlive_52.apk from Alexis rom below.
Click to expand...
Click to collapse
It says app not installed. Dolby working perfectly in earphones but not on speaker. I am on googlewiz crd1
raj.ayush78 said:
It says app not installed. Dolby working perfectly in earphones but not on speaker. I am on googlewiz crd1
Click to expand...
Click to collapse
Sorry,I'm not developer.Please ask developer.I'm on Renovate ıce 11.1 CRD7.
Related
Hi Guys,
I was wondering if the Viper4Android sound mod could be ported for Galaxy Note5?
I tried the one in the Viper thread but it seems to break the in-call audio on my Note5 (N920C Dual Sim).
Any thoughts on this?
Its simply the best audio mod (Combined with MaxxAudio)
Thanks!:good:
UPDATE:
Thanks to 'Lo Xa' for pointing me to this link ---> http://forum.xda-developers.com/tmobile-galaxy-note5/themes-apps/viper4android-note-5-t3192400 <--- (Install Viper4Android from here)
Follow the 'Steps' part of it ONLY and you will be good to go. (First 2 steps will be okay if you want Viper4Android only (without IRS))
Also, if you want to maximize your sound experience, top it up with MaxxAudio zip (attached). It will result in out of world experience. Try out and please post your experience/results.
Step to Install MaxxAudio.zip:
1. Install the Viper4Android and setup in the phone as shared in the above link.
2. Reboot to recovery.
3. Wipe Cache and Dalvik Cache
4. Install zip
5. Wipe Cache and Dalvik Cache again
6. Reboot System
Enjoy heavenly sound! (Test your in-call functionality to be sure if its working. Its working for me in my N920C Dual)
Thanks and Credits to Original Teams who have created the Viper and MaxxAudio zip files.
anmolkakkar said:
Hi Guys,
I was wondering if the Viper4Android sound mod could be ported for Galaxy Note5?
I tried the one in the Viper thread but it seems to break the in-call audio on my Note5 (N920C Dual Sim).
Any thoughts on this?
Its simply the best audio mod (Combined with MaxxAudio)
Thanks!:good:
Click to expand...
Click to collapse
Try flashing this in call audio fix after you install viper
https://mega.nz/#!IIchjLzb!g__hLyKieliXc4KxRJrkO3JfF8UwonFS5oINPZDS4fw
Goody68 said:
Try flashing this in call audio fix after you install viper
https://mega.nz/#!IIchjLzb!g__hLyKieliXc4KxRJrkO3JfF8UwonFS5oINPZDS4fw
Click to expand...
Click to collapse
Thanks, will give it a try and post the results. Hope nothing else breaks
Edit: Tried. Not working. Same results as before.
Any other suggestions please?
I use this http://forum.xda-developers.com/tmobile-galaxy-note5/themes-apps/viper4android-note-5-t3192400. Mine is 920C (1 sim only) and confirm it works. Don't forget to use Titanium and freeze Sound Alive 3.0. Hope it could help you! Good luck.
Lo Xa said:
I use this http://forum.xda-developers.com/tmobile-galaxy-note5/themes-apps/viper4android-note-5-t3192400. Mine is 920C (1 sim only) and confirm it works. Don't forget to use Titanium and freeze Sound Alive 3.0. Hope it could help you! Good luck.
Click to expand...
Click to collapse
Thanks! It worked
OP Updated for future folks
Here's What I did on my N920C
Config
* Arter97 Kernel
* Stock Odex Rom with Xposed V75
How I did
* Download Viper APK from the Viper Homepage
* Moved Viper FX Apk (4.4+ Version) to System/app using rootexplorer
* Reboot
* Install Driver as Requested by Viper, Reboot Again
* Open Viper and Enable Headset Master Power, All else untouched! (Why would I want viper to handle my phone speaker? I don't use it for music)
* UI Setting - Expert Mode / FX Compatible Mode - Compatible
* On Music Player - Disable UHQ Upscaler / Enable SoundAlive+ (Yes! Enabled)
* Reboot
Ops
Now, If I want UHQ, I just enable it from Music Player, and I disable Viper from Master Power
If I want to go with Viper, Enable from Master Power and re-disable UHQ. These changes work without reboot in realtime
Observations
I need UHQ Mode, because it's the best when you're listening to FLAC Tracks. But on MP3 Tracks, UHQ upscaler is poor. So whenever it's MP3, I use Viper. My Phone Calls are working, No Audio loss, and Best of both worlds (Viper and UHQ) are available. Also, Viper along with Soundalive+ enabled (not UHQ, The option below that) is a perfect combination. Increasing surround in viper just generates a pretty fake effect, whereby keeping viper surround at Effect level 1 and setting SoundAlive+ to On makes it more realistic.
Hope this helps!
JazonX said:
Here's What I did on my N920C
Config
* Arter97 Kernel
* Stock Odex Rom with Xposed V75
How I did
* Download Viper APK from the Viper Homepage
* Moved Viper FX Apk (4.4+ Version) to System/app using rootexplorer
* Reboot
* Install Driver as Requested by Viper, Reboot Again
* Open Viper and Enable Headset Master Power, All else untouched! (Why would I want viper to handle my phone speaker? I don't use it for music)
* UI Setting - Expert Mode / FX Compatible Mode - Compatible
* On Music Player - Disable UHQ Upscaler / Enable SoundAlive+ (Yes! Enabled)
* Reboot
Ops
Now, If I want UHQ, I just enable it from Music Player, and I disable Viper from Master Power
If I want to go with Viper, Enable from Master Power and re-disable UHQ. These changes work without reboot in realtime
Observations
I need UHQ Mode, because it's the best when you're listening to FLAC Tracks. But on MP3 Tracks, UHQ upscaler is poor. So whenever it's MP3, I use Viper. My Phone Calls are working, No Audio loss, and Best of both worlds (Viper and UHQ) are available. Also, Viper along with Soundalive+ enabled (not UHQ, The option below that) is a perfect combination. Increasing surround in viper just generates a pretty fake effect, whereby keeping viper surround at Effect level 1 and setting SoundAlive+ to On makes it more realistic.
Hope this helps!
Click to expand...
Click to collapse
Thanks a lot for detailing out. It does help a lot. :good:
Does anyone know how to get Viper4android to work with system sounds? I like increasing the system volume. But it doesn't seem to register. Headphones do no worries.
Maxxaudio broke Viper sound on Spotify, now only works on poweramp, not in streaming services.
How to uninstall it?
Viper4.... (fix thanks Team Audax Rom) working perfectly on the note 5 (N920C) works on all players also spotify, Netflix, etc ...
https://www.dropbox.com/s/tuh7dqoykyx1tqf/Viper4_Full2_Audax.zip?dl=0
Can you tell me what to do with the zip? Thanks.
convolver doesnt work
aezv said:
Can you tell me what to do with the zip? Thanks.
Click to expand...
Click to collapse
If you're talking about the MaxxAudio zip file, it is already mentioned in the Steps of the OP.
For installation of Viper4Android, there is a link in the OP to another thread which explains its installation in detail.
Urgent!
aezv said:
Can you tell me what to do with the zip? Thanks.
Click to expand...
Click to collapse
Just flash it
---------- Post added at 04:43 AM ---------- Previous post was at 04:34 AM ----------
uzzz2004 said:
Viper4.... (fix thanks Team Audax Rom) working perfectly on the note 5 (N920C) works on all players also spotify, Netflix, etc ...
https://www.dropbox.com/s/tuh7dqoykyx1tqf/Viper4_Full2_Audax.zip?dl=0
Click to expand...
Click to collapse
Dude, it deleted my SoundAlive..
How can I get it back now? :'(
Can you at least confirm that it got deleted on your Note 5 as well?
And if so, we need someone to provide us the original SoundAlive now!
khalil20089 said:
Just flash it
---------- Post added at 04:43 AM ---------- Previous post was at 04:34 AM ----------
Dude, it deleted my SoundAlive..
How can I get it back now? :'(
Can you at least confirm that it got deleted on your Note 5 as well?
And if so, we need someone to provide us the original SoundAlive now!
Click to expand...
Click to collapse
Try the attachment .. should get you SoundAlive back
I followed the instruction to install the V4 but it failed.. In frustration because i really want this in my note 5 i went to playstore and downloaded the v4android i saw... And it works!!!!
Sent from my SM-N930F using Tapatalk
Hello friends Here I am sharing Xperia_X_Performance_Walkman™ Latest zip (Android 5.0-7.1) tested with Android Lollipop / M.M/ Nougat.. CM roms/Lineage 14.1/ RR/AOSP fully working with all features like XLoud, Clear Audio Sony effects etc.
The Package is fully tested but i am not responsible for any kind of harm or effect on performance
Features
* Latest Update Music 9.1.5.A.0.4 (Direct Updates from play store)
* Clear Audio
* Xloud
* DESS HX
* Dynamic Normaliser
* Automatic Optimization
* Mic Sensitivity
* Sony Audio Effects
* Compatible with Viper Audio
* Working with Bluetoot Audio Devices (Some sony music packages give problem with BT handsets)
Requirements-
* Your device must be rooted and you have installed Custom Recovert
* +50 mb System space for the package
Important Note- Please freez if you have any sound effect installed with your Rom like Music FX(You can freez using Titanium Backup)
How to install
* Reboot your phone into recovery mode
* install the Package given in this thread
* Clean Catch
* That's all.
Please hit like button if you like
Link:
https://drive.google.com/file/d/0B92gDD0t-D7bcUo3YklnUVRPamc/view?usp=drivesdk
Working with devices:
*Samsung Galaxy Note3
Tested with Roms CM 13.1/Lineage14.1/RR 8.2/AOSP (based on 7.1.1 Naught
*LG G4 H811r based rom
*OnePlus 3T AOSP Extended Unofficial Rom
(Based on user feedback)
looks dope :victory:
Anyway you can embed the libs with the app into a single installable apk for us poor Samsung souls without custom recovery?? xD
PromethianKnight said:
looks dope :victory:
Anyway you can embed the libs with the app into a single installable apk for us poor Samsung souls without custom recovery?? xD
Click to expand...
Click to collapse
There is single Sony music app that can be pushed in to system using root explore or ES file manager if your phone is rooted but sound effects will be missing...here is a single installable app...but you have to push is in system if it fails to install.
Create a folder named Music in Device/System/app.... With right permissions for folder rwx r-x r-x and put the given apk in the link with permissions -rw-r--r-- and reboot.
For permissions in es file manager....long press on apk after pasting in system/app/music or for folder permissions long press on folder after selection click on more and here click on properties in properties you can set permissions.
Link
So will DESS HX work on any device?
Mrxyzl said:
So will DESS HX work on any device?
Click to expand...
Click to collapse
I use samsung galaxy Note3 (N900) lineage 14.1 ..working flawlessly(The package given in first post).... It should work on other devices without any problem..
Balraj77712 said:
There is single Sony music app that can be pushed in to system using root explore or ES file manager if your phone is rooted but sound effects will be missing...here is a single installable app...but you have to push is in system if it fails to install.
Create a folder named Music in Device/System/app.... With right permissions for folder rwx r-x r-x and put the given apk in the link with permissions -rw-r--r-- and reboot.
For permissions in es file manager....long press on apk after pasting in system/app/music or for folder permissions long press on folder after selection click on more and here click on properties in properties you can set permissions.
Link
Click to expand...
Click to collapse
Thank you so much!!!!!
I'll give it a shot :fingers-crossed: :fingers-crossed:
PromethianKnight said:
Thank you so much!!!!!
I'll give it a shot :fingers-crossed: :fingers-crossed:
Click to expand...
Click to collapse
Ok....thanks...your feedback will be valuable.
Standalone APK would be nice for us non rooted users
Latest Music update is 9.3.6.A.1.0 (received today). What's the difference between your package and Pexomod?
bel57 said:
Latest Music update is 9.3.6.A.1.0 (received today). What's the difference between your package and Pexomod?
Click to expand...
Click to collapse
The package that i have provided is package of sony music app with full features ....i tried almost all music app packages given on xDA with lineage 14.1 but didn't work with my BT handset SBH50....that why I build this one work flawless.....
Would this be compatible with Dolby Atmos?
If not, freezing it would soulve any possible issues? Still trying to find the best sound mod
IagoJevaux said:
Would this be compatible with Dolby Atmos?
If not, freezing it would soulve any possible issues? Still trying to find the best sound mod
Click to expand...
Click to collapse
Yes it is compatible with Dolby Digital ...you need to only freez your ROM's default audio effect like in lineage Rom there is Music FX is default sound effect app...
Hi, somehow it doesnt seem to work on HTC 10 running MaximusHD
NagasakiGG said:
Hi, somehow it doesnt seem to work on HTC 10 running MaximusHD
Click to expand...
Click to collapse
What Rom are you using....and what doesn't work bro..?
Balraj77712 said:
What Rom are you using....and what doesn't work bro..?
Click to expand...
Click to collapse
I'm using MaximusHD 3.7 (Android 7.0), and it bootloops after installing
NagasakiGG said:
I'm using MaximusHD 3.7 (Android 7.0), and it bootloops after installing
Click to expand...
Click to collapse
Try to clear cach or restart phone....if fails to boot....
May be conflict with audio libs...sorry for incompatibility ...with your os.
Is Auto creation of playlist support is present?
SanOne+1 said:
Is Auto creation of playlist support is present?
Click to expand...
Click to collapse
Yes......recently played Auto playlist created...
walkman
Balraj77712 said:
Yes......recently played Auto playlist created...
Click to expand...
Click to collapse
I mean playlist based on song mood.
anyway sony removed support for that : http://www.xperiablog.net/2016/03/21/sony-confirms-why-it-removed-sensme-from-the-music-app/
M'kay. I said package but each app of Pexomod is available as a standalone download. So there is one for Music app.
I think all these optimizations are just placebo... but well, thanks for your work, bud. :highfive:
XtremeMusic by @androidexpert35
THIS MOD NEEDS CUSTOM RECOVERY AND ROOT
WORKING WITH POWERAMP and SUPPORTS ANDROID MM AND N!
The only one with HTC BOOM SOUND, Sony SFORCE SURROUND 3D and Sony DSEE-HX!
ALSO OPTIMIZED FOR DUAL SPEAKER DEVICES!
XtremeMusic + viper4droid included. It will remove viper4droid if already installed and install again
Dolby atmos ,max audio also available as add-ons
Original thread by @androidexpert35
https://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
WORKING IN ALL N ROMs.
i have tried this mod in small aurel and its working but no call sound!
XtremeMusic +viper4droid flashable zip
http://androidexpert35.com/xtrememusic-download/
XtremeMusic Remover
https://www.androidfilehost.com/?fid=817550096634767494
I'm using RR 16/6 BUILD AND IT'S WORKING FINE. DISABLE OTHER SOUND MOD BEFORE FLASHING!
Xtrememusic pro (paid) features :-
https://play.google.com/store/apps/details?id=androidexpert35.com.xtrememusicpro
1. XtremeMusic power manager.
2. Qualcomm hexagon DSP enhancer.
3. Speaker Hi-Res audio enabler.
4. Samplerate Hi-Res booster.
5. Lossless Enhancer.
What does it do doe?
Link broken
aleksjug said:
What does it do doe?
Click to expand...
Click to collapse
It will solve audio problems in nougat rom. It will deliver 32 bit 192khz audio through headphone and speaker.
Nano23 said:
Link broken
Click to expand...
Click to collapse
Thread is currently closed.
Moderator "Fraudulent hacked account selling is done within this app. This kind of piracy has no place here, at all. This kind of thing should always be reported when discovered. Thread closed"
Well that was fast lol
aleksjug said:
Well that was fast lol
Click to expand...
Click to collapse
It's very old mod with update. Someone hacked there payments account that's why thread is closed. Mod is working fine.
XtremeMusic official app and remover.
https://drive.google.com/folderview?id=0B1i0nPKYyCIsdWs4SmNNa0pXZTg
You forgot to mention it requires root.
aleksjug said:
You forgot to mention it requires root.
Click to expand...
Click to collapse
Sorry,OP updated
I'm on RR .. how to deinstall Viper and SoundFX?
Heisenberg666 said:
I'm on RR .. how to deinstall Viper and SoundFX?
Click to expand...
Click to collapse
You need a root explorer I use MK File explorer go to root directory then System/apps then find the folder where viper and other one is installed and delete it...
*Before deleting Viper uninstall it's driver from the app...
hi,
i flash the mod on miui rom, have no call sound but always no sound after flash xtreme remover.. , what is problem? dolby atmos dont work too
how to disable xtreme music or restore sound call please?
bob187 said:
hi,
i flash the mod on miui rom, have no call sound but always no sound after flash xtreme remover.. , what is problem? dolby atmos dont work too
how to disable xtreme music or restore sound call please?
Click to expand...
Click to collapse
Flash remover and wipe dalvik and cache reboot
This is for Oreo Qualcomm Samsung Galaxy S7 I don't guarantee this will work on other devices/roms/android versions
1 ) Download and extract attached .so_files.zip and copy .so files at system/vendor/lib/soundfx/
2 ) Give 777 permission (all rwx)
3 ) Open system/etc/audio_effects.conf/ and system/vendor/etc/audio_effects_common.conf and paste
under "libraries"
Code:
v4a_fx {
path /system/lib/soundfx/libv4a_fx_jb_NEON.so
}
#NECESSARY FOR XHIFI
v4a_xhifi {
path /system/lib/soundfx/libv4a_fx_jb_X86.so
}
under "effects"
Code:
v4a_standard_fx {
library v4a_fx
uuid 41d3c987-e6cf-11e3-a88a-11aba5d5c51b
}
#NECESSARY FOR XHIFI
v4a_standard_xhifi {
library v4a_xhifi
uuid d92c3a90-3e26-11e2-a25f-0800200c9a66
}
4 ) Reboot
I've attached also my audio_effects.conf and audio_effects_common.conf at attached .conf_files.zip so you can use them as a guide if you need. you may try overwriting them too if you want
After doing that you will be able to install and use Viper4android FX and Viper4android HIFI
You can download them from:
Official Viper4android Thread
Official Viper4android FX download Link
Official Viper4android HIFI download Link
You don't need all this process there is a specific viper apk that am using
Sent from my Samsung SM-G935U using XDA Labs
iamchukwudi said:
You don't need all this process there is a specific viper apk that am using
Sent from my Samsung SM-G935U using XDA Labs
Click to expand...
Click to collapse
You are right. This is the manual process, in case you cant get it working (like me) after using vipers app automatic installation or if you want to get it installed in a rom before flashing it
btw would you mind posting your specific viper apk?
Driver installed, detected, not working.
It shows Supported: Yes , Enabled : No , Processing : No
Any solutions ?
[ SOLVED - SEE NEXT POST ]
The working version with automatic installation
This version works on all variants of S7, just grant root and install the driver, reboot and enjoy.
Viper4android not processing
I ve installed.
Neon yes
Enabled yes
Supported yes
Status normal
But not processing
Any idea?
My rom is G935UUES9CSC2
I ve uninstalled sound alive and adapt sound
Sorry for my bad English.
Viper4android not processing
I ve installed but not processing. I've uninstalled adapt sound and sound alive. Any suggestion?
I have g935uues9csc2 rom
The First Generic Dolby Mode For S7 / S7 Edge Roms [NOTE FE / NOTE 8]
this mode enables Samsung Dolby Atmos on your rom.
this mode is modifying config files such as floating_feature,xml, audio_effects_common.conf, audio_effects_sec.xml and build.prop in order to be compatible with all Note Fe Pie Port for S7.
How to install?
1. Flash zip.
2. Reboot your device.
Changelog:
Code:
[U]V1.0[/U]
initial release
[U]V1.5[/U]
1. fixed modifying scripts, should solve some props not changed in build.prop and floating_feature.xml
2. added Dolby Profile for games.
[U]2.0[/U]
1. Back to default Note Fe soundalive libs to ensure stability.
2. Added Dolby offload effect from S10, this is not another feature that can be enabled or disabled, it's just part of the Dolby sound system.
3. Workaround for mp3 songs not activating Dolby due to compress offload effect that is activated when playing mp3 songs, disabled effect in audio_policy.conf.
Now people who complained they don't hear effect changes when activating dolby will notice Dolby activates.
[U]2.5[/U]
1. fully reworked with newest Dolby Atmos libs from Note 10 rom, sound is now more crisp and more deeper.
2. added now two options for flashing: Note FE and Note 8 based ports.
enjoy!
short notice:
I assume some of you have had bad experience with latest Dolby Atmos Mode. Please try newest version released and post feedback, this version should solve your issues as audio drivers are back to stock now.
If you still disappointed, soon will publish flashable zip to remove effects.
Download Link for Note 8 Ports:
https://www.androidfilehost.com/?fid=4349826312261616314
Download Link for Note FE Ports:
https://www.androidfilehost.com/?fid=4349826312261621713
Credits and thanks:
@xpirt for base script for modifying relevant configs
Nice work mate,Keep it up
Hi, show in the video How to install this ROM and do any pictures of This ROM
Ivo92 said:
Hi, show in the video How to install this ROM and do any pictures of This ROM
Click to expand...
Click to collapse
This isn't a rom, and installation procedure is written
I can't see dolby settings in soundalive and no quick launch icon.
With this mode do we have permanent dolby or should there be option to disable it?
edit: my build.prob file remains unchange. I made changes before flashing the custom ROM and changed NFE details with S7 Edge one. Script not changing them. I'll try to set values manually and try it.
last edit:
I had to set following values manually on build.prob:
"ro.product.model", "SM-N935F"
"ro.build.product", "gracerlte"
"ro.product.name", "gracerltexx"
"ro.product.device", "gracerlte"
I also add following lines to floating_feature.xml manually:
<SEC_FLOATING_FEATURE_AUDIO_SUPPORT_PSEUDO_DUAL_SPEAKER>TURE</SEC_FLOATING_FEATURE_AUDIO_SUPPORT_PSEUDO_DUAL_SPEAKER>
<SEC_FLOATING_FEATURE_MMFW_SUPPORT_DOLBY_AUDIO>TRUE</SEC_FLOATING_FEATURE_MMFW_SUPPORT_DOLBY_AUDIO>
Click to expand...
Click to collapse
Not sure why scripts didn't worked for those files for me.
Working great now. Thank you @MemAllocatoR
rroyy said:
I can't see dolby settings in soundalive and no quick launch icon.
With this mode do we have permanent dolby or should there be option to disable it?
edit: my build.prob file remains unchange. I made changes before flashing the custom ROM and changed NFE details with S7 Edge one. Script not changing them. I'll try to set values manually and try it.
last edit:
I had to set following values manually on build.prob:
"ro.product.model", "SM-N935F"
"ro.build.product", "gracerlte"
"ro.product.name", "gracerltexx"
"ro.product.device", "gracerlte"
I also add following lines to floating_feature.xml manually:
Not sure why scripts didn't worked for those files for me.
Working great now. Thank you @MemAllocatoR
Click to expand...
Click to collapse
Hey @rroy nice fix. Did you do this on the BDv3 rom because I think I have the same issue. Cheers
nvoll89 said:
Hey @rroy nice fix. Did you do this on the BDv3 rom because I think I have the same issue. Cheers
Click to expand...
Click to collapse
yes, I'm on BD v3
Nice working on light NFE light rom v6 ty so much
nvoll89 said:
Hey @rroy nice fix. Did you do this on the BDv3 rom because I think I have the same issue. Cheers
Click to expand...
Click to collapse
Tomorrow will upload new version with fixed script for build.prop, could you please make sure that lines are not added to floating_feature.xml? It should be at the very bottom of the file.
MemAllocatoR said:
Tomorrow will upload new version with fixed script for build.prop, could you please make sure that lines are not added to floating_feature.xml? It should be at the very bottom of the file.
Click to expand...
Click to collapse
I'm sure I searched and couldn't find them.
rroyy said:
I'm sure I searched and couldn't find them.
Click to expand...
Click to collapse
ok thanks for the feedback, will get fixed probably today.
MemAllocatoR said:
ok thanks for the feedback, will get fixed probably today.
Click to expand...
Click to collapse
Thank you for the fix.
Thanks for the Mod, it works well in BD V3!
kia5566 said:
Thanks for the Mod, it works well in BD V3!
Click to expand...
Click to collapse
It will benefit what I wanted to know unloaded and install immediately. Thanks guys for what you do !!!
MemAllocatoR said:
The First Generic Dolby Mode For S7 / S7 Edge Roms Based On Note FE Port
this mode enables Samsung Dolby Atmos on your rom.
this mode is modifying config files such as floating_feature,xml, audio_effects_common.conf, audio_effects_sec.xml and build.prop in order to be compatible with all Note Fe Pie Port for S7.
How to install?
1. Flash zip.
2. Reboot your device.
Changelog:
Download Link:
https://www.androidfilehost.com/?fid=1395089523397956732
Credits and thanks:
@xpirt for base script for modifying relevant configs
Click to expand...
Click to collapse
Dolby fix works great on my s7 flat, thanks. I also have s8 flat, stock ROM rooted with Magisk. Is there an easy way to add Dolby dual speakers support for my s8 without bootloop? Thanks
---------- Post added at 11:50 PM ---------- Previous post was at 11:47 PM ----------
milan982 said:
Dolby fix works great on my s7 flat, thanks. I also gave s8 flat, stock ROM rooted with Magisk. Is there an easy way to add Dolby dual speakers support for my s8 without bootloop? Thanks
Click to expand...
Click to collapse
I'm on android pie and already have Dolby atmos, but only for headphones.
I presume it is related to this setting
<SEC_FLOATING_FEATURE_AUDIO_SUPPORT_PSEUDO_DUAL_SPEAKER>TURE</SEC_FLOATING_FEATURE_AUDIO_SUPPORT_PSEUDO_DUAL_SPEAKER>
milan982 said:
Dolby fix works great on my s7 flat, thanks. I also have s8 flat, stock ROM rooted with Magisk. Is there an easy way to add Dolby dual speakers support for my s8 without bootloop? Thanks
---------- Post added at 11:50 PM ---------- Previous post was at 11:47 PM ----------
I'm on android pie and already have Dolby atmos, but only for headphones.
I presume it is related to this setting
<SEC_FLOATING_FEATURE_AUDIO_SUPPORT_PSEUDO_DUAL_SPEAKER>TURE</SEC_FLOATING_FEATURE_AUDIO_SUPPORT_PSEUDO_DUAL_SPEAKER>
Click to expand...
Click to collapse
Edit: I tried this and got bootloop
Also tried to flash zip and It works but sound was way worse than stock.
milan982 said:
Edit: I tried this and got bootloop
Also tried to flash zip and It works but sound was way worse than stock.
Click to expand...
Click to collapse
Same here it sounds really bad compared to the stock sound (TeamExyKings Light ROM v6)
How do we remove it? Just flash the ZIP again?
Stretch001 said:
Same here it sounds really bad compared to the stock sound (TeamExyKings Light ROM v6)
How do we remove it? Just flash the ZIP again?
Click to expand...
Click to collapse
I did TWRP restore.
milan982 said:
I did TWRP restore.
Click to expand...
Click to collapse
What did you restore? Your whole ROM?!
Stretch001 said:
What did you restore? Your whole ROM?!
Click to expand...
Click to collapse
Yes. I didn't found uninstall zip.