I've managed to grab a copy of the v10d KDZ for the G710EM variant of the G7.
This firmware was originally an UK release, I believe customised for O2 (the only carrier to so far take the G7 in the UK).
This firmware originally shipped as an OTA upgrade to O2 branded handsets and was on my phone; but having "downgraded" to v10b, I can no longer re-upgrade to v10d either using LG Bridge or LG UP. (the update gets to 98% and then errors - the phone restarts the update process and then hangs at 2%. A hard power cycle of the phone brings it back online with the previous software version intact)
I'll gladly make this available if people want it; but it comes with the warning above that this *may not* work on your handset.
stuclark said:
I've managed to grab a copy of the v10d KDZ for the G710EM variant of the G7.
This firmware was originally an UK release, I believe customised for O2 (the only carrier to so far take the G7 in the UK).
This firmware originally shipped as an OTA upgrade to O2 branded handsets and was on my phone; but having "downgraded" to v10b, I can no longer re-upgrade to v10d either using LG Bridge or LG UP. (the update gets to 98% and then errors - the phone restarts the update process and then hangs at 2%. A hard power cycle of the phone brings it back online with the previous software version intact)
I'll gladly make this available if people want it; but it comes with the warning above that this *may not* work on your handset.
Click to expand...
Click to collapse
I would like to get a copy please. Thanks
Me too. I am waiting for firmware update. I have G710em v10b and noting no update. Is this normal???
Deleted
Sorry for the delay replying guys.
I've found that this update does not install over v10b (at least on my phone) as "upgrade" - it needs to be installed as "refurb".
This means it will do a factory reset after the installation
I guess you used uppercut, didn't you?
If so, how did you manage to flash as refurbished? I thought only upgrade option works.
My Lg G710EM upgrade today to v10f by FOTA. Now I have 4k 60fts. So I dont need kdz file.
Thank a lot
Montechristo said:
I guess you used uppercut, didn't you?
If so, how did you manage to flash as refurbished? I thought only upgrade option works.
Click to expand...
Click to collapse
No; I used LGUP with the latest DLLs (you can get the v10b or v10d DLL files from LG Bridge)
Profoloco said:
My Lg G710EM upgrade today to v10f by FOTA. Now I have 4k 60fts. So I dont need kdz file.
Thank a lot
Click to expand...
Click to collapse
Which country are you in?
stuclark said:
No; I used LGUP with the latest DLLs (you can get the v10b or v10d DLL files from LG Bridge)
Click to expand...
Click to collapse
Thx for your information.
A totally newbie question, actually two.
checking via LG bridge or OTA, does it makes any difference? Or they are both available at the same time?
Isn't there a "Sammobile" like website where you can just download the new updates and flash it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
no difference
Luinwethion said:
A totally newbie question, actually two.
checking via LG bridge or OTA, does it makes any difference? Or they are both available at the same time?
Isn't there a "Sammobile" like website where you can just download the new updates and flash it?
Click to expand...
Click to collapse
The update available through FOTA (Firmware over-the-air) and LG's desktop software - LG Bridge.
LG push OTA update first and then several days later, You can use LG bridge to upgrade your phone.
Swedish newbie here.....
I was on v10b and rooted it. Now upgraded to v10f through computer as FOTA failed. Root is of course gone.
Is there any root for v10f yet?
Skickat från min LM-G710 via Tapatalk
Related
After updating to MM When I try to configure the screen lock I get this error, and does not recognize my sim card
Does anyone know how I can repair this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have you tried factory reset? Also dial *#06# and check whether the IMEI is displayed correctly or as 0/null.
Affangta said:
Have you tried factory reset? Also dial *#06# and check whether the IMEI is displayed correctly or as 0/null.
Click to expand...
Click to collapse
i already did factory reset, and the EMI it's incorrect, exist someway to fix it?
yulianov25 said:
After updating to MM When I try to configure the screen lock I get this error, and does not recognize my sim card
Does anyone know how I can repair this?
View attachment 4102748
View attachment 4102750
View attachment 4102772
Click to expand...
Click to collapse
I have exactly the same problem
It seems that one of the users (another threath LG H900 5.1 > 6.0 problem) is right and I upload software h900 6.0 via KDZ via TOT even via octopus and nothing, even the same error is possible that the main card is not h900 but another variant?, He says he solved the problem by loading vs900 software because the main card was not h900 but refurbished vs900.
I opened the phone and I was right, now i am going to load the correct software and tell you.
I am facing same problem
I don't know what i can do i brought from in dubizzle for second hand...att h900 and for me mobile hostpot not working...
Everyone getting same problem who update has phone by LGUP. Who update from FOTA like who living in US so they don't have any problem.
I brick my phone in reupdating my mobile in LGUP then I install again lollipop root version .
I face error many times but I try again and again and now I downgrade finely.
Anti roll is 2.0 that's why u can't go back to lollipop from marshmallow. But there is a way
Everything is possible if u use ur mind because it's made by human not God.
khalilrehman17 said:
Everyone getting same problem who update has phone by LGUP. Who update from FOTA like who living in US so they don't have any problem.
I brick my phone in reupdating my mobile in LGUP then I install again lollipop root version .
I face error many times but I try again and again and now I downgrade finely.
Anti roll is 2.0 that's why u can't go back to lollipop from marshmallow. But there is a way
Everything is possible if u use ur mind because it's made by human not God.
Click to expand...
Click to collapse
Please make a more detailed description, I have managed to skip antirollback protection with octopus but I leave the dead phone completely brick, another way is to force the rom but also end up killing the phone, phone no logo no load, no update mode or anything if Have you been able to bypass the protection without killing your LG could you share your method?
Any suggestion how to repair that type of problem, or how to go back to 5.1.1
thanks
I TRIED
jesemazari said:
i have exactly the same problem
it seems that one of the users (another threath lg h900 5.1 > 6.0 problem) is right and i upload software h900 6.0 via kdz via tot even via octopus and nothing, even the same error is possible that the main card is not h900 but another variant?, he says he solved the problem by loading vs900 software because the main card was not h900 but refurbished vs900.
I opened the phone and i was right, now i am going to load the correct software and tell you.
Click to expand...
Click to collapse
i tried but i can not install error coming..
If you have solution let me know...
tmdmoosa said:
i tried but i can not install error coming..
If you have solution let me know...
Click to expand...
Click to collapse
same probleme... And there no updates anymore for this lg v10 h900 at&t ???
Hellow Guys
I have a Problem With My LG V10 H900 At&t Android 5.1.1 . I cant Repair My IMEI Number ..Can some one guide me.
[email protected]
Its almost October and I'm still stuck on EMUI 4.1. My model is BLN-L21, middle east variant, not rooted. Updater still says no update available
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help would be greatly appreciated.
You're on latest update, as you can check here http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=bln-l21c185b140&firmware_page=0 without a model debranding, at the moment you cannot receive other updates.
So I wont be getting emui 5 or 6 for that matter?
BELIEVER PK said:
So I wont be getting emui 5 or 6 for that matter?
Click to expand...
Click to collapse
Exactly, not for now at least without a device rebranding. Oh yes, EMUI 6 will be on Oreo, and we still don't know for sure if our device will finally get it or not.
BELIEVER PK said:
Its almost October and I'm still stuck on EMUI 4.1. My model is BLN-L21, middle east variant, not rooted. Updater still says no update available
Any help would be greatly appreciated.
Click to expand...
Click to collapse
i have BLN-L21 and I am on emui 5.1 with B371 update officially through the system update in settings. Also middle east variant
---------- Post added at 01:32 AM ---------- Previous post was at 01:30 AM ----------
RedSkull23 said:
You're on latest update, as you can check here http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=bln-l21c185b140&firmware_page=0 without a model debranding, at the moment you cannot receive other updates.
Click to expand...
Click to collapse
That's definitely not true. I am on BLN-L21C185B371 middle east variant
So what is wrong with mine?
oae08 said:
That's definitely not true. I am on BLN-L21C185B371 middle east variant
Click to expand...
Click to collapse
Ok sorry my bad, i put the B140 at the end and obviously MT site found only matching build firmwares.
BELIEVER PK said:
So what is wrong with mine?
Click to expand...
Click to collapse
You could try to force the update by going on system update -> clicking on the 3 dots on upper right corner -> choose 1st option, "download latest update". If nothing is found, you could flash latest update by dload method.
BELIEVER PK said:
So what is wrong with mine?
Click to expand...
Click to collapse
Flash these files via dload. it should update you to the BLN-L21C185B361 version.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v84689/f2/full/update.zip
http://update.hicloud.com:8180/TDS/...89/f2/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_BLN-L21_hw_meafnaf.zip
Good luck
You sure its safe right? Because I've seen a lot of posts about manual updating where people are facing missing themes/fm radio/updater app and lots of bugs...
And will this void my warranty?
BELIEVER PK said:
You sure its safe right? Because I've seen a lot of posts about manual updating where people are facing missing themes/fm radio/updater app and lots of bugs...
Click to expand...
Click to collapse
This happens the most when wrong firmwares for your build number are downloaded, but with the 3 packages that shashank linked to you yes, you are safe. They're official packages that matches your build
Thanks. Will flashing these void my warranty.
And if you don't mind, could you give me instructions on how to flash via dload...
BELIEVER PK said:
Thanks. Will flashing these void my warranty.
And if you don't mind, could you give me instructions on how to flash via dload...
Click to expand...
Click to collapse
These are absolutely stock version and no warranty loss.
For dload, check my signature below for dload guide. It is quick steps for all requirements and you can flash files easily.
Call customer care or chat with their online support they will ask for IMEI and few other things and updated will be there within 48 hours they have that hi care app where u can get online support or from there website or twitter or simply by calling customer care number
Thanks
Hey guys, sorry for the necrobump. I successfully flashed update.zip using dload (had to move it to internal storage to flash successfully).
But whenever I try to flash the 2nd file "update_full_BLN-L21_hw_meafnaf.zip" it goes upto 5% and fails. Also while booting it says "Your device has failed verification and may not work properly". On top of that, I lost file manager and update option in the settings (probably because the 2nd file did not flash). And for some reason, my build no. is "NRD90M test-keys" now...
Please help.
FYI, I'm still not rooted nor unlocked Bootloader.
I had the same problem: recovery stuck at 5 % until timed-out. Please make sure that your device is not connected to your computer via USB and then reboot into recovery mode. I unplugged the cable from both devices to be very sure.
See this thread on Huawei P9: p9/help/forced-recovery-stuck-5-t3594840
Greetings from Brazil.
There's a new update available to our loved and hated phone.
May security update on OPLS27.76.51-5.
I've downloaded using @erfanoabdi tool.
Sideload via ADB and works fine up to now.
https://erfanoabdi.000webhostapp.com/index.php?model=XT1650&sv=Blur_Version.27.11.58.griffin.retail.en.US&carrier=retbr&sn=SERIAL_NUMBER_NOT_AVAILABLE
I received it OTA. Reteu
Verstuurd vanaf mijn XT1650 met Tapatalk
Got it too, reteu. But not installed yet.
OTA
This morning, i received OTA update notification.
Just download and install.
Retapac - UBL - Stock US Oreo
In Poland ,also a news ota
Same here, received it via ota. Reteu. It's a security update to may 1st.
Anyone can share a screenshot with the bug-fixes of this version (if there are any)? Thanks in advance!
No need. Found the details on Motorola's website: https://support.motorola.com/uk/en/solution/MS129117
ENHANCEMENTS
This update introduces changes including the following:
- Android security: Includes the updates of Android security patches through May 1st, 2018.
Click to expand...
Click to collapse
I think I got a little bit better batterylife with this update. But only had it it for a day so perhaps to early to say.
Bro, please try playing pubg under stock oreo does it still lags after 3 minutes?
Thanks
bijixda said:
Bro, please try playing pubg under stock oreo does it still lags after 3 minutes?
Thanks
Click to expand...
Click to collapse
It is probably throttling due to heat. Get a Custom Kernel (or ROM), which allows you to deactivate thermal throttling.
kirkx10 said:
I think I got a little bit better batterylife with this update. But only had it it for a day so perhaps to early to say.
Click to expand...
Click to collapse
battery was bad on my phone after oreo update and with this one its gotten worse
going back to RROreo as i cant trust the official software anymore.
works on xt1650-03 reteu ?
can someone build partition gpt.bin from this ota ? i need that, please
full OTA available
The full OTA can be found here:
https://forum.xda-developers.com/moto-z/how-to/how-to-relock-bootloader-moto-z-xt-1650-t3821817
(including the gpt and any other relevant files to actually oem-lock the phone again :heart_eyes: )
Version OPLS27.76.51-7
My Phone have the July security pack. I upgraded it automatically, with the bootloader locked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
July security update - bricked phone!
Beware!
The last OTA update (OPLS27.76-51-7, July security update) bricked my Moto Z! I had no root, battery was at about 60% - now every time I try to turn it on it displays "your phone has failed verification and may not work properly" and reboots to bootloader with no way to force boot into system.
Do at least a full backup before applying!
I'll post an update as soon as I hear back from the support.
just update the july update via OTA, working just fine
- moto z 8.0 RETAPAC non root, locked bootloader
- upgrade to 8.0 from 7.1 via sideload
Updated today to july security version without problems, retmx without root.
This bricked my phone too. Can't unlock the bootloader, and Moto Support says I can't do anything but send my phone to the seller and hope for a repair. As I never flashed anything on this phone, does anyone know how to flash the right factory image and make my brick actually work again? Thank you all for your help!
stuntr38 said:
This bricked my phone too. Can't unlock the bootloader, and Moto Support says I can't do anything but send my phone to the seller and hope for a repair. As I never flashed anything on this phone, does anyone know how to flash the right factory image and make my brick actually work again? Thank you all for your help!
Click to expand...
Click to collapse
akkenoth said:
Beware!
The last OTA update (OPLS27.76-51-7, July security update) bricked my Moto Z! I had no root, battery was at about 60% - now every time I try to turn it on it displays "your phone has failed verification and may not work properly" and reboots to bootloader with no way to force boot into system.
Do at least a full backup before applying!
I'll post an update as soon as I hear back from the support.
Click to expand...
Click to collapse
and these are the exact reasons why i switched to custom rom since i no longer trust the official updates since the initial oreo release
If this this update upgrades the bootloader from 92.03 to newer in the process you cant even fix it yourself by flashing the official oreo image , even with a locked bootloader you should still be able to do that
Android 11 Global ROM
WIFI:
https://rsdsecure-cloud.motorola.com/download/TB-J606F_S320029_210923_ROW.zip
LTE:
https://rsdsecure-cloud.motorola.com/download/TB-J606L_S320030_210923_ROW.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@qwer1335 I've changed the prefix of your thread from "Development" to "General" as the thread didn't qualify for the first one. Please review the sticked guidances of the responsible moderators' team prior to your next posting and do not change the prefix back! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Updated with LMSA with no issues, only be warned that everything is deleted and you start from scratch. I had my bootloader unlocked, this was kept. But I am unable to root it as I did with Android 10. Patching boot.img with Magisk and I get bootloop to fastboot after flashing it. Only way to continue as of now was to flash the boot.img that came with the new firmware.
Hallux_ said:
Updated with LMSA with no issues, only be warned that everything is deleted and you start from scratch. I had my bootloader unlocked, this was kept. But I am unable to root it as I did with Android 10. Patching boot.img with Magisk and I get bootloop to fastboot after flashing it. Only way to continue as of now was to flash the boot.img that came with the new firmware.
Click to expand...
Click to collapse
So may I ask if you bought your 606f from China or abroad?
Since mine is a Chinese one, everytime I flash 0805/0906 it ends with *system and hardware not compatible* error. (the same both BL locked and unlocked)
I wonder if this new ROW rom fixes this issue.
Thanks.
i tried but the link doesn't work
EDIT: i tried from rescue and smartaassistant, and i found the update
asukav said:
So may I ask if you bought your 606f from China or abroad?
Since mine is a Chinese one, everytime I flash 0805/0906 it ends with *system and hardware not compatible* error. (the same both BL locked and unlocked)
I wonder if this new ROW rom fixes this issue.
Thanks.
Click to expand...
Click to collapse
I have the global version.
Hallux_ said:
I have the global version.
Click to expand...
Click to collapse
Then that's not a problem.
Can you guide me how to unpack the img files? I tried several but none of those works correctly.
I just want to do some research on what kind of restrictions lenovo does to the rom files.
Thank you.
asukav said:
Then that's not a problem.
Can you guide me how to unpack the img files? I tried several but none of those works correctly.
I just want to do some research on what kind of restrictions lenovo does to the rom files.
Thank you.
Click to expand...
Click to collapse
Sorry, I am not sure if it is what you are looking for, but I downloaded the new ROM with LMSA and I do have all the IMG files in the download directory. I do not know if you can do the same not having the exact same tablet model.
asukav said:
So may I ask if you bought your 606f from China or abroad?
Since mine is a Chinese one, everytime I flash 0805/0906 it ends with *system and hardware not compatible* error. (the same both BL locked and unlocked)
I wonder if this new ROW rom fixes this issue.
Thanks.
Click to expand...
Click to collapse
i recently install this rom but have "system and hardware not compatible, can you intsall android 11 on chinese lenovo p11 tablet?
famicom9x said:
i recently install this rom but have "system and hardware not compatible, can you intsall android 11 on chinese lenovo p11 tablet?
Click to expand...
Click to collapse
Still a "NO". It's the same: "system and hardware not compatible".
So I flash back to 0520.
I do hope I could spare some time to unpack those imgs to have a check on some specific files next week.
Just be busy all the time with my work...
Engineers from Lenovo China give me no useful answers. I think I can only count on myself.
I tried update to 210923 via LMSA, but not boot.
Then I tried again with qpst 2.7.496, it boot up and get a minor update to 0925.
Still lost serial number.
Que??
Have a new ROM in https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/TB-J606F_S320109_211207_ROW.zip but after i flash with QPST 2.7.496 still "system and hardware not compatible". Need someone fix it.
tnt1212 said:
Have a new ROM in https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/TB-J606F_S320109_211207_ROW.zip but after i flash with QPST 2.7.496 still "system and hardware not compatible". Need someone fix it.
Click to expand...
Click to collapse
It's because your device is Region locked. Within this XDA there is a forum on how to region unlock ur device. You have to use QCN file to change it.
Mine won't update because of region lock and now it's working perfectly
Hey guys, do you know if we still have widevine L1 after updating this ROM with locked bootloader?
I rooted my Samsung device previously, but has since done a clean flash and locked the bootloader so it's back to how it originally was. But now, if I update my phone, the IMEI & baseband are gone. I discovered that clean flashing the firmware A125FXXU1BUG1 seems to fix the issue for me.
So my question is, is it possible to update my phone without loosing my IMEI and baseband? And is this an issue caused by Samsung or me rooting my phone?
The same thing for me, I rooted, then go back to stock like you did but can't update to the latest version A125FXXU1BUI3. I'm currently on version A125FXXU1BUF9.
Edit.
I tried multiple times and couldn't upgrade. I updated it from the first available firmware Android 10 to the latest Android 11 in my region (A125FXXU1BUI3 XTC) with no luck. I tried every existing firmware on my device without success in updating to the current version, and I'm still stuck on version A125FXXU1BUF9. A125FXXU1BUI3 is only 710 MB in size, but no dice. I believe we are to blame for rooting our phones.
No luck means invalid IMEI and invalid baseband.
The issue isn't because you rooted your phones. Since the update A125FXXU1BUG6 I have also experienced IMEI and Baseband errors and I've never rooted my phone. I think the updates have a bug in them or something. Same goes with the latest A125FXXU1BUI3 update. I thought the latest one would fix it but it didn't. Waiting to see if the November security update will fix it
These are fimware issues made by samsung, they are not happending because you rooted your phone or triped knox or other... It's a ordinary fimware bug I thought they would fix in BUI3 which relased after BUG6(where the issue started happending) I thought then someone would allready report that, I don't actualy know if samsung knows this is happending or they just don't care to fix it.
And it's like as if anything over BUF9 is good... it really isn't. Some people say thay get bootloops and other weired issues on GSIs with fimware over BUF9 version. I haven't tested that my self yet, so I'm going of others people words. I dindn't test it because when I first saw the IMEI issues I didn't care to test.
Anyway, going to send a modem.tar file which could fix the issues, haven't tested....
I've flashed the new A125FXXU1BUJ4 November security update and the bug is still there but I was able to flash this IMEI/Baseband repair file and it fixed it. I actually reported to samsung but their response was to visit a help center. I guess they don't know it a bug in their firmware. Just flash the file using Odin and add it in CP.
The fix was posted on this forum:
https://forum.xda-developers.com/t/sim-baseband-imei-errors-since-tuesday-17th.4322143/post-85875843
Allehandro said:
I've flashed the new A125FXXU1BUJ4 November security update and the bug is still there but I was able to flash this IMEI/Baseband repair file and it fixed it. I actually reported to samsung but their response was to visit a help center. I guess they don't know it a bug in their firmware. Just flash the file using Odin and add it in CP.
The fix was posted on this forum:
https://forum.xda-developers.com/t/sim-baseband-imei-errors-since-tuesday-17th.4322143/post-85875843
Click to expand...
Click to collapse
sorry i frgot to send it, anway you can find in that other post as you linked it. glad it worked. Sorry for inconvenience to anyone.
Thank you so much, if it wasn't for you guys until now I'm still waiting for Samsung to fix it.
I can't download this file and I had this bug any other solution?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyway I using this phone only for some games but without imei some games don't work
Forgot it I solved flashing Android 10 Baseband if someone has the same problem try to flash the last android 10 baseband this a palliative solution (If Samsung upgrades their binary to 2 I think the bug cannot be fixed)