https://imgur.com/a/hbc70YP
Today I am reviewing the G-MOST OnePlus 6 Screen Protector, [2-Pack] [No Rainbow Effect] [Full Coverage] HD Tempered Glass Screen Cover Shield for OnePlus6 - Black from Amazon. You can find the link below if you would like to purchase it.
While I like the idea of a TSGP for my OP6, I have yet to find one that is full adhesive that actaully fits the entire screen. This one is no exception.
It is actually quite smaller than the screen and you are missing maybe 1/10 of an inch on either side. The cutout at the top for the camera is on point though.
If they made the edges the correct size of the phone this thing would actually work. It was easy to apply and it sticks well so far.
https://www.amazon.com/gp/product/B07DK43BXG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Ths bro for a honest review. That's a shame that there is still no good TG on the market.
Have you guys not used the actual oneplus brand TGSP? Works like a champ! Way better than the junky ebay ones.
JedixJarf said:
Have you guys not used the actual oneplus brand TGSP? Works like a champ! Way better than the junky ebay ones.
Click to expand...
Click to collapse
I read bad reviews about that one as well.
There are good reviews of them as well. Mine went on easily and absolutely no issues since.
The only knock I would have is price. They aren't cheap, although mine was purchased with the ultimate bundle from 1+
netgar said:
Ths bro for a honest review. That's a shame that there is still no good TG on the market.
Click to expand...
Click to collapse
I really like the cheapo one I got on Amazon called Seiaol.
https://www.amazon.com/gp/aw/d/B07DBKM4XD?psc=1&ref=yo_pop_mb_pd_title
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A6003 using Tapatalk
netgar said:
Ths bro for a honest review. That's a shame that there is still no good TG on the market.
Click to expand...
Click to collapse
I have it but haven't put it on cause I'm not sure how it will do. Does it cut off any screen? Or have any rainbow effect or dot matrix? I did see some bad reviews on it as well so I've been skeptical about using it especially if I don't like it I won't be able to put the original film protector back on. Does it let any particles underneath it at all?
netgar said:
I read bad reviews about that one as well.
Click to expand...
Click to collapse
Give it a shot, out of the 6 or 7 I've tried it's by far the best. Much better than The official 5T protector.
I have the orig SP still in the packaging and waiting on this one that i ordered from aliexpress for 4 bucks so that i can put that one on first and see if its any good... otherwise ill just put on the orig one that i got for free thanks to the rev code of a buddy.
i am also thinking of maybe doing it with LOCA 2500 glue because that seems to give a very good result and seems very responsive when touching the screen
I really hate the black boarders on these TGSPs...
ampped101 said:
https://imgur.com/a/hbc70YP
Today I am reviewing the G-MOST OnePlus 6 Screen Protector, [2-Pack] [No Rainbow Effect] [Full Coverage] HD Tempered Glass Screen Cover Shield for OnePlus6 - Black from Amazon. You can find the link below if you would like to purchase it.
While I like the idea of a TSGP for my OP6, I have yet to find one that is full adhesive that actaully fits the entire screen. This one is no exception.
It is actually quite smaller than the screen and you are missing maybe 1/10 of an inch on either side. The cutout at the top for the camera is on point though.
If they made the edges the correct size of the phone this thing would actually work. It was easy to apply and it sticks well so far.
https://www.amazon.com/gp/product/B07DK43BXG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I installed G-Most tgsp today and so far I think this is the best tgsp imo. Went on smoothly, full screen adhesive, no rainbow effect, etc. Like OP said, it cuts may be 1px on eachside of the screen but it does not impact my everyday usage. I am going to keep it until something better preferably with all-clear borders show up. I was not familiar with this brand , so thanks for mentioning it here.
Gr8man001 said:
I installed G-Most tgsp today and so far I think this is the best tgsp imo. Went on smoothly, full screen adhesive, no rainbow effect, etc. Like OP said, it cuts may be 1px on eachside of the screen but it does not impact my everyday usage. I am going to keep it until something better preferably with all-clear borders show up. I was not familiar with this brand , so thanks for mentioning it here.
Click to expand...
Click to collapse
I actually kept mine on as well until something else comes out.
Gr8man001 said:
I installed G-Most tgsp today and so far I think this is the best tgsp imo. Went on smoothly, full screen adhesive, no rainbow effect, etc. Like OP said, it cuts may be 1px on eachside of the screen but it does not impact my everyday usage. I am going to keep it until something better preferably with all-clear borders show up. I was not familiar with this brand , so thanks for mentioning it here.
Click to expand...
Click to collapse
I also orderd this TGSP last week and got it 3 days ago.
It really is super easy to assemble(leave your case on for easy placement) and I was able to apply it bubble free at my first try.
I like the coverage and size of the glas, but the black border is something I would not choose a second time. It blocks a small area which is just some pixels small, but its there and I can notice it.
Cutouts are very precise and because I used my case as assembly help it was easily aligned with my camera, top and bottom display edges and the "sides" fit very nice into my case. It's as centered as it could be in my opinion.
Would buy again.
jlczl said:
I really like the cheapo one I got on Amazon called Seiaol.
https://www.amazon.com/gp/aw/d/B07DBKM4XD?psc=1&ref=yo_pop_mb_pd_titleView attachment 4535622
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
Is this also the kind that is a bit smaller than the screen?
Edit: n/m
Related
I, like many others i`m sure, is looking for a good quality shell for a Omnia 7. Can`t find anything as yet.
If you do see a good shell, please post a link here.
Thank you!!
I bought this one from eBay which has arrived today:
http://cgi.ebay.co.uk/SAMSUNG-I8700..._MobilePhonesCasesPouches&hash=item43a3706915
It's ok, thought I would recommend getting the black one rather than the smoked one I have. The only issue I have is that the sleep, camera and volume buttons are a bit difficult to press with the case one. I think it may soften or loosen up with a bit of use so I'll keep it on for now and see how it goes.
DC
Yup they soften up
i was the same. But few days now and they are nice and easy to press.
I did give them a bit of a warming up by clicking them a fair few times, but does work to loosen the silicone up.
I got the black one as you can see by this post/pics
http://forum.xda-developers.com/showthread.php?p=9470551#post9470551
I'm struggling with screen protectors though. I ordered some cheapy ones from a German seller but, with the greatest of respect, they're utter dogsh1t. Far too thin, scratched by a piece of card I was using to push bubbles out.
I really want to find a nice anti-glare protector if I can, otherwise I'll be going the Martin Fields route.
DavidC1980 said:
I'm struggling with screen protectors though. I ordered some cheapy ones from a German seller but, with the greatest of respect, they're utter dogsh1t. Far too thin, scratched by a piece of card I was using to push bubbles out.
I really want to find a nice anti-glare protector if I can, otherwise I'll be going the Martin Fields route.
Click to expand...
Click to collapse
Sounds like you got the same ones as me, That's my 4th film heh... I know why they put 6 in there now but for £4........ or a scratched phone ?
Ether way mine is more protected than my other parts of me have ever been
btw i found it's less pressure with the card, and more laying it down and just ever so slowly backing it up and using the card to make sure the bubble you saw don't re-lay where it was.
I'm no expert but 1st go was a joke.... so many bubbles i laughed hard...
2nd better but no dice,
3rd was brilliant apart from a few bits, and my mind just made me take it off and start again
4th was perfect give or take 1 - 3 bubbles i can live with until i try again
You want to hear how my mate managed with an ipad XD
I am having trouble finding screen protectors as well. I think I ordered the same thing as you guys (bedifol ultraclear) from protectionfilms24 but when I went to their site, it seems it's pretty much their lowest range and looking at the reviews for the various cuts they offer for other phones, I am just wondering if it's worth not having a screen protector at all.
Please let me know if you have managed to found one that is good.
Cheers.
Low range - high range.... It was ALL that was out when i got the phone/wanted protection
It does what it says.
It protects the screen XD
0.05mm thick - Same as the "one" for £8 which i bought as with the £3 one to test all of them, Recently bought the martin fields and imo... it tints it for me.... i like the clear/glazed protectors which look like the glass it should be.
So 6 for £4 is win win
I got a screen protector from here http://www.devdef.com/products/for-samsung-omnia-7 (actually I got two), but I found that they're pretty good and by far the easiest to install of any screen protector I've ever used. To apply it, you need to moisten it (instructions are on the site), and then you can slide it over the surface of the phone, before it dries, until you get the perfect positioning. Bubbles are also easy to remove because of this - you just have to do it before it sets. The only drawback, really, is that it's pretty reflective. I don't notice very much in use, but it reflects bright lights quite a lot, so if you're looking for anti-reflective coating, I'd give this a miss. Also on a plus - it's pretty strong as you can see from the video on the site. Also, as the instructions say, it improves the longer it's on your device. Initially it looks a bit poor, but stick with it (no pun intended )
Yos, I'll look at those....remember to wish someone Happy Birthday today!!!!
DavidC1980 said:
Yos, I'll look at those....remember to wish someone Happy Birthday today!!!!
Click to expand...
Click to collapse
European age of Xbox360 ?
I know the Xbox360 is 5 today lol
Yos knows who
What's best to mix the water solution with to apply that screen protector? I tried a mix of fairy washing up liquid and water but without good results. :s
DavidC1980 said:
I bought this one from eBay which has arrived today:
http://cgi.ebay.co.uk/SAMSUNG-I8700..._MobilePhonesCasesPouches&hash=item43a3706915
It's ok, thought I would recommend getting the black one rather than the smoked one I have. The only issue I have is that the sleep, camera and volume buttons are a bit difficult to press with the case one. I think it may soften or loosen up with a bit of use so I'll keep it on for now and see how it goes.
DC
Click to expand...
Click to collapse
I got mine few weeks already from amazon:
http://www.amazon.co.uk/GEL-CASE-SA...W8MW/ref=sr_1_3?ie=UTF8&qid=1292094897&sr=8-3
Very nice indeed. And I am using savvy screen protector, little rubbery in touch but not bad at all
Yeah, I used fairy liquid and water, and you only need a tiny amount of fairy liquid - it's concentrated, you know ;-), and you also only need very little of the solution on the screen protector. Also, as I mentioned it looks pants to start off with, and it takes a while to dry, but eventually it looks fine. If you like a shiny screen protector.
I bought both of them on eBay. Very fine !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.tmaddict.com/index.php/forum/viewtopic.php?f=160&t=21830
http://www.tmaddict.com/index.php/forum/viewtopic.php?f=160&t=21829
I am looking for a case which is similar to my incipio feather for iphone 4 and as far as I can see they don't exist and I detest gel cases with a passion so will continue to wait.
Very slippery phone to hold too!
Seen the perfect one but not in stock for weeks (judging by the galaxy s model).
http://www.inkino.co.uk/zen/index.php?main_page=product_info&products_id=4268
I have ordered the last available (in stock) one on Amazon tonight. Will upload pics when it arrives.
daleski75 said:
I am looking for a case which is similar to my incipio feather for iphone 4 and as far as I can see they don't exist and I detest gel cases with a passion so will continue to wait.
Very slippery phone to hold too!
Seen the perfect one but not in stock for weeks (judging by the galaxy s model).
http://www.inkino.co.uk/zen/index.php?main_page=product_info&products_id=4268
Click to expand...
Click to collapse
As promised the pics of the CM barely there case.
edit: It also came with a free screen protector & a piece of cleaning cloth which I haven't used yet. Waiting for my current screen protector to be bit more scratched up (martin fields). Shouldn't take long.
That case looks really good just a pity I had to send my Omnia 7 away for repair!
What bothers me with these case is that I won't feel the cold metallic, sturdy cover finish in my hand anymore Is there any possibility to have a bumper instead?
Of course we need one of these threads.
I'm going to go buy a full body BodyGuardz this weekend and i'll report back with pictures, and a review. I've had a lot of bodyguardz for various phones, and they cover the best. They have the orange peel and sticky feel on the screen, but not nearly as bad as i've seen on Zagg. I've never once been satisfied with zagg.
I've tried Stealth Guards on my iphone and desire Z, and the screen protector is a good texture, feels smooth, no resistance. But they don't cover enough of the body.
Never owned BSE
I've had a Skinomi, and they have the same texture as the Stealth guards, but they seem to be very vulnerable to peeling. Also not enough body cover. (might as well buy the stealth guards, they're cheaper)
Anyone got any yet?
I just Installed Skinomi full body. I've had no issues so far and I like the results. I followed the direction to the T, but added the extra step of applying the protectors in a steam up bathroom. Helps minimize dust, and the stream aids in installation).
Sent from my SAMSUNG-SGH-I997 using XDA App
do you mind posting some pictures?
After work I will post some pictures, I have the product pictures on me right now. Another thing is the product states that once applied to at least allow 12-24? hours to use. I am using it less than that, probably a bad move on my part. So far no problems, we'll see by the end of today.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought two, one for my Infuse(full body) and Inspire(screen only).
Sent from my SAMSUNG-SGH-I997 using XDA App
Skinomi full body.
thanks for the pics! the screen protector looks awesome. the full body could be a bit larger. the back looks funny haha. but i really like that screen protector, i've always liked skinomis compared to other brands.
Thanks. Ya I could do it again but pull'em tighter. But I am very satisfied. I was surprised by how the body peices held up, I figured they would peel off in my pocket, but no problems. The only con's I can think of is there are some thin exposed parts of the phone, imprint of object or finger nail leaves dimples but fade smoothly; slowly. If applied correctly it will last.
Sent from my SAMSUNG-SGH-I997 using XDA App
I'm going to go get my bodyguardz now. Ill post up pics when I get it on
the bodyguardz kioske in the mall didn't have them in stock yet -_-. gotta order them online.. damnit
i got a invisible shield from best buy because i was impatient and didn't want to wait for shipping. they don't have the full body, so i got the screen protector.
i just finishd putting it on, the texture is different than previous zaggs i've used. also there are a bunch of horizontal lines evenly spaced (they were there before i put it on, not scratches) which you can see at certain angles. and they also have a little zagg logo on the bottom right of the screen protector.. that's new.. and annoying. it's hard to see, but since i know it's there. i don't like it -_-
i'll take some pictures when i can, but overall it's the same resistant non smooth that i dislike about zaggs.
eatjello said:
i got a invisible shield from best buy because i was impatient and didn't want to wait for shipping. they don't have the full body, so i got the screen protector.
i just finishd putting it on, the texture is different than previous zaggs i've used. also there are a bunch of horizontal lines evenly spaced (they were there before i put it on, not scratches) which you can see at certain angles. and they also have a little zagg logo on the bottom right of the screen protector.. that's new.. and annoying. it's hard to see, but since i know it's there. i don't like it -_-
i'll take some pictures when i can, but overall it's the same resistant non smooth that i dislike about zaggs.
Click to expand...
Click to collapse
Strange, I just installed a Zagg Invisishield, No pesky logo or anything. It feels pretty good... Maybe its just my greasy fingers
Along with my Pop case!
hmm, there isn't a little black "zagg" stamp on the bottom right in between the search button and the bottom of the screen against the edge?
eatjello said:
hmm, there isn't a little black "zagg" stamp on the bottom right in between the search button and the bottom of the screen against the edge?
Click to expand...
Click to collapse
nope... Weird... got it at a Best Buy too
hoofadoo said:
nope... Weird... got it at a Best Buy too
Click to expand...
Click to collapse
the hell... i'll take pictures of it when i get the chance >_>.
hoofadoo said:
Strange, I just installed a Zagg Invisishield, No pesky logo or anything. It feels pretty good... Maybe its just my greasy fingers
Along with my Pop case!
Click to expand...
Click to collapse
How about the orange peel effect?
Whoa! some massive orange peel effect on that ZAG. Man I am tempted to give you guys and extra one of the skinomi, been saving it for my bro.
SOESANTO said:
How about the orange peel effect?
Click to expand...
Click to collapse
A little bit, but not ridiculous..
hoofadoo said:
nope... Weird... got it at a Best Buy too
Click to expand...
Click to collapse
I got one from best buy and I got the Zagg stamp on mine to...and the shield has those lines...it looks like crap....
one028 said:
I got one from best buy and I got the Zagg stamp on mine to...and the shield has those lines...it looks like crap....
Click to expand...
Click to collapse
you got the same thing as me then, it seems this is a new design or something. looks terrible.
I called Zagg and they told me that they dont stamp ZAGG on the shields...BS...something is weird...im taking mine back...i hope they take it back at best buy...plus i noticed the picture on the box shows the screen protector going all the way to the top with a hole around the ear piece and camera...the one i got has a big cut out at the top around the camera all the way to the earpiece speaker..
Promised to do a review on this screen protector, so paulo this one's for you. Haha. Well I've had this screen protector on for about 4 weeks now, and I absolutely love it. I would definitely recommend it, especially for those on a budget. A $5.95 well spent.
Pros:
Dry application
Precise cut outs
Great touch responsiveness (Swyping with this bad boy is a breeze.)
No fingerprints
No smudges
Better visibility in sunlight
Looks sexy lol
Cons:
Took me 2 out of the 3 protectors to get it on right, or without bubbles. Maybe I'm just not good at that.
Screen quality degradation (This is expected with a anti-glare/matte screen protector. There is some pixelation, which is really noticeable on white backgrounds.)
You can but it HERE.
Pictures that took me forever.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the review. I already ordered mine and just wanted to check out some more images of it. Out of curiosity, what case are you using? Also is there a notice gap between the protector and the lip of the case? The first few images make it seem like it, but the rest make the gap appear small.
keisukehonda said:
Thanks for the review. I already ordered mine and just wanted to check out some more images of it. Out of curiosity, what case are you using? Also is there a notice gap between the protector and the lip of the case? The first few images make it seem like it, but the rest make the gap appear small.
Click to expand...
Click to collapse
I'm guessing you are taking about the difference between this picture of the screen protector:
vs
Well there are two reasons.
1. I didn't apply the screen protector perfectly. You can also see the little bubbles created by dust left on the screen. So I took it off, and tried again.
2. Two different cases. I doubt this affects it, however, considering I switch the cases out per week and the gap between the screen protector and the case doesn't increase or shrink.
I have two cases. The white one the Mercury TPU Nexus 4 case(comes in many different colors), and the black one is the Acase Superleggera Pro Hybrid dual layer Nexus 4 case(also comes in different assortments).
I'm also using this screen protector and I love it too,great price ya can't go wrong with these. ????
Sent from my Nexus 4 using xda app-developers app
I bought this screen protector 3 months ago but never used it, as it looks like a hassle to apply if it takes going through most of them to get one that is applied properly. I just kept the stock plastic protector on mine; maybe after that gets destroyed I will give it a try.
pjc123 said:
I bought this screen protector 3 months ago but never used it, as it looks like a hassle to apply if it takes going through most of them to get one that is applied properly. I just kept the stock plastic protector on mine; maybe after that gets destroyed I will give it a try.
Click to expand...
Click to collapse
its pretty simple just be quick, and i would day do it in the restroom, less dust in the air. always works for me.
I've installed countless screen protectors for me and friends. For the wet ones, you definitely want to be in a steamy bathroom as that helps settle the dusts. The dry ones, need to be done quickly. You can slip a small piece of tape between the screen and the screen protector to grab some of the dust. The stickiness of the tape beats the static force created by the protector. Not sure of its technical name.
My silliest method was to put the phone in the middle, on top of a fan blowing air upwards. That way it created a space where dust will not be. It worked perfectly.
Any place to buy this internationally?
DeepMemory said:
Any place to buy this internationally?
Click to expand...
Click to collapse
Man. That sucks. Well honestly if you wanted to. I could buy one and then post it up onto eBay and you could buy it off of me for the same price. Just the shipping cost would be different since you're international. Not trying to advertise or anything just suggesting.
Sent from my Nexus 4 using xda premium
i`m surprised that there is no bubbling at the edges at the price the Halo is selling... or is it not caught on the picture?
I assume this will be the same for the glossy version?
DeepMemory said:
Any place to buy this internationally?
Click to expand...
Click to collapse
Not sure man. Try looking for it in the amazon website in your country.
hpl912 said:
i`m surprised that there is no bubbling at the edges at the price the Halo is selling... or is it not caught on the picture?
I assume this will be the same for the glossy version?
Click to expand...
Click to collapse
I mean, I guess there is. But to notice the bubbling you would have to nitpicking or looking in with a magnifying glass (not really). I'd say the bubbling on the side is about .25 cm from the edge. Really slight, and with my case on you can't notice it.
Slightly off topic, but what case is that on your N4 OP?
Sent from my Nexus 4 using Tapatalk 4 Beta
gear.h34d.2012 said:
Slightly off topic, but what case is that on your N4 OP?
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Acase Superleggera Pro Dual Layer Case
For LG G5, I think the screen protector is good choose than case.
rumbikrobo said:
I think that a good screen protector is always an impotent accessory for any smartphone. If I buy LG G5 I'll definitely get a Tempered Glass Screen Protector
Click to expand...
Click to collapse
anyone know of a good one thats not a PRE ORDER ?
Module will not affect the phone screen protector?
LORD19191 said:
anyone know of a good one thats not a PRE ORDER ?
Click to expand...
Click to collapse
There are few people who have them in stock on Amazon and eBay
Hi,
Has anyone got images of the full glass screen and the middle covered glass screens on the actual phone yet?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
Jerseymase54 said:
Hi,
Has anyone got images of the full glass screen and the middle covered glass screens on the actual phone yet?
Thanks
Click to expand...
Click to collapse
Since I bought a screen protector for my Nexus 5X. So Maybe I could choose the same brand iPely for my LG G5.
Just ordered the YooTech tempered glass screen protector from Amazon! I will update and take pics when it gets in! :good::fingers-crossed:
aknotts415 said:
Just ordered the YooTech tempered glass screen protector from Amazon! I will update and take pics when it gets in! :good::fingers-crossed:
Click to expand...
Click to collapse
looks like you got the last one. its currently unavailable.
riggsandroid said:
looks like you got the last one. its currently unavailable.
Click to expand...
Click to collapse
Yeah I noticed that lol I hope theres not anything wrong with the design lol
aknotts415 said:
Just ordered the YooTech tempered glass screen protector from Amazon! I will update and take pics when it gets in! :good::fingers-crossed:
Click to expand...
Click to collapse
I bought one Yootech glass screen protector for my Nexus 5X,but there is one air bubble.So I try another brand,looks great and feels good.
I used the Yootech for G4 and it's pretty great, hopefully this one works well too
Has anyone recieved one of these yet that has the top bit of the phone covered as well? I'm wondering how it interacts with the curve at the top. Thanks.
UnderTheAir said:
Has anyone recieved one of these yet that has the top bit of the phone covered as well? I'm wondering how it interacts with the curve at the top. Thanks.
Click to expand...
Click to collapse
I've ordered a coscod for me and the wife that has the full coverage with the curved top.. They not cheap, so we'll see how it works out. I'll be getting it in tomm..
Sent from my LG-H810 using XDA-Developers mobile app
i wonder what will happen to the bottom, uncovered by the glass, battery part.
thick plastic housing over metal will definitely be sratched badly in first month of use.
cellhelmet.com
They were on Shark Tank a couple years back
I'm returning an item just like this (different vendor) as the adhesive is just around the borders and top.
The adhesive is weak and in my case it was not aligned properly to the "glass" so you could see it covering some parts of the screen.
The middle have no adhesive whatsoever and it does not make contact with the phone screen. This causes the protector to flex and each tap/touch on the screen feels like using an old phone with plastic screen.
One last thing: it is a fingerprint magnet and very reflective.
InflatedTitan said:
I've ordered a coscod for me and the wife that has the full coverage with the curved top.. They not cheap, so we'll see how it works out. I'll be getting it in tomm..
Sent from my LG-H810 using XDA-Developers mobile app
Click to expand...
Click to collapse
LGSilva said:
I'm returning an item just like this (different vendor) as the adhesive is just around the borders and top.
The adhesive is weak and in my case it was not aligned properly to the "glass" so you could see it covering some parts of the screen.
The middle have no adhesive whatsoever and it does not make contact with the phone screen. This causes the protector to flex and each tap/touch on the screen feels like using an old phone with plastic screen.
One last thing: it is a fingerprint magnet and very reflective.
Click to expand...
Click to collapse
Dang, that sucks. I'll definitely be needing tempered glass, and this is one reason I'm leaning toward the G5—Edge owners are having a devil of a time finding a good one for themselves.
Please post pics of the Yootech.
I'd be really surprised if there's a tempered glass protector that is already correctly designed for the curve at the top. As in, Will it stay stuck? In the past whenever I've had a curved glass phone it's usually months after its release when a company finally designs a true curved TGSP. I hope I'm wrong because I have a Yootech on the V10 and it's great! (Them not making one for the S7 yet might be a sign as to why this was pulled from Amazon).
I settled for a cheap square one for now [Omoton on Amazon].
InflatedTitan said:
I've ordered a coscod for me and the wife that has the full coverage with the curved top.. They not cheap, so we'll see how it works out. I'll be getting it in tomm..
Sent from my LG-H810 using XDA-Developers mobile app
Click to expand...
Click to collapse
It is too expensive in my opinion.Less than $10 is OK.
I'm cautious of anything that claims to cover curved glass. This is just based off of my past purchases.
Waiting for guinea pigs to test the waters first
My dream phone Galaxy Note 9 needed top notch protection. Didn't want to take a risk, so went on to hunt for the best of the best SKIN & SCREEN protector and found the perfect one. GadgetShieldz It Is!
Just amazed at the way it eliminates the scratches. The major part is it just cuddles the whole screen right till the edge of the screen glass. Also very hard to figure out whether it is applied or not.
The Skin too protects the back, camera lens (a big +) from scratches and gives the mobile a total grip. If you are looking to use your phone without any bulk, this must be the protection to go for. Go for the case fit screen protector if you are planning to use a case.
DickDokster said:
My dream phone Galaxy Note 9 needed top notch protection. Didn't want to take a risk, so went on to hunt for the best of the best SKIN & SCREEN protector and found the perfect one. GadgetShieldz It Is!
Just amazed at the way it eliminates the scratches. The major part is it just cuddles the whole screen right till the edge of the screen glass. Also very hard to figure out whether it is applied or not.
The Skin too protects the back, camera lens (a big +) from scratches and gives the mobile a total grip. If you are looking to use your phone without any bulk, this must be the protection to go for. Go for the case fit screen protector if you are planning to use a case.
Click to expand...
Click to collapse
How is the performance of the screen protector with spen, also when you applied the screen protector was there any bubble initially?
I just got a dbrand skin for mine and I'm loving it. Great fit and got a matching one for my MacBook Air too!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
...I didn't want to take the risk and wanted the best of the best ... Hilarious.?[emoji23]?
Sent from my SM-N960U1 using Tapatalk
DickDokster said:
My dream phone Galaxy Note 9 needed top notch protection. Didn't want to take a risk, so went on to hunt for the best of the best SKIN & SCREEN protector and found the perfect one. GadgetShieldz It Is!
Click to expand...
Click to collapse
with the GadgetShieldz screen protector, would the Samsung case that comes in the box work properly? Please confirm.
sandeeppathak007 said:
How is the performance of the screen protector with spen, also when you applied the screen protector was there any bubble initially?
Click to expand...
Click to collapse
I don’t use S Pen much but from whatever I used, the S Pen works normally as it should without any screen protector. Even the Air commands work perfectly alright. Didn’t see any depressions or scratches on the screen.
And the bubbles can be seen if your installation goes wrong, but it will all get vanished within a day. Trick is to squeeze out as much as moisture as possible immediately after confirming the alignment. I didn’t get even a single bubble.
liv2drive said:
with the GadgetShieldz screen protector, would the Samsung case that comes in the box work properly? Please confirm.
Click to expand...
Click to collapse
They offer a case fitting screen protector too on their website. So I think those should work with any case.
I applied and checked, it fits perfectly.
AndyCr15 said:
I just got a dbrand skin for mine and I'm loving it. Great fit and got a matching one for my MacBook Air too!
Click to expand...
Click to collapse
Dbrand Camo series look awesome.
Video now uploaded -
DickDokster said:
My dream phone Galaxy Note 9 needed top notch protection. Didn't want to take a risk, so went on to hunt for the best of the best SKIN & SCREEN protector and found the perfect one. GadgetShieldz It Is!
Just amazed at the way it eliminates the scratches. The major part is it just cuddles the whole screen right till the edge of the screen glass. Also very hard to figure out whether it is applied or not.
The Skin too protects the back, camera lens (a big +) from scratches and gives the mobile a total grip. If you are looking to use your phone without any bulk, this must be the protection to go for. Go for the case fit screen protector if you are planning to use a case.
Click to expand...
Click to collapse
Raptor skin looks great.
meesagandu said:
It's my White Marble skin from GadgetShieldz. It demanded some extra effort and time to get this finish.
Nevertheless, happy with the results. My mobile now looks amazing!
Click to expand...
Click to collapse
Obviously wasn't taken with a note 9 camera
The dragon skin looks really cool. Also, the camo was cool too.
My custom SlickWraps is coming in today. Thanks for the post.
Limeybastard said:
Obviously wasn't taken with a note 9 camera
Click to expand...
Click to collapse
Obviously not .
Custom SlickWraps. I did a pretty bad job of applying it. It still looks good, but tiny imperfections make the whole thing underwhelming IMO. But I'll get over it. Also, the bulge is a metal plate for the magnetic phone holders.
I've got a spare Slickwraps skin, so I'm giving it away to someone in the UK
https://androidandy.uk/slickwraps-note-9-skin-giveaway.php
Sopiguard Skin - 3m Color Shift Deep Space
Haven't really seen many ppl mention the above brand but was using them on my s8+
Using one of those skins that change colors - this one goes between purple and green - don't really get copper like the pics indicate but still cool nonetheless
Punter666 said:
Looks Good! Do they give replacements if something goes wrong?
Click to expand...
Click to collapse
I think they will.
oz1421 said:
Haven't really seen many ppl mention the above brand but was using them on my s8+
Using one of those skins that change colors - this one goes between purple and green - don't really get copper like the pics indicate but still cool nonetheless
Click to expand...
Click to collapse
Yeah it's cool. I will buy this for my another device.
Punter666 said:
In a dilemma whether to go for a skin or case. Do they give drop protection?
Click to expand...
Click to collapse
Nope, not much. Other than scratch protection, skins doesn't give any protection.
Ordered from Gadgetshieldz on 25th August and I'm still waiting for it to arrive!
I am in the UK, but even stuff from China doesn't take longer than 2 weeks. This is my first time ordering stuff from India, and will probably be the last.