Hello Friends
Couple days ago, I looking for some updates for my Huawei Y 7 and finaly I found.. But when I flashed it with TWRP, my phone do not waked up again. Instead it shows black screen with blue light.
The blue light shows only when I put SD Card inside and I put the card outside and try to reboot, then phone is completly dead without any light.
My PC detects my phone only when SD Card is inside and is detected as Qualcomm HS - USB Diagnostic 9006. I even tryed to flash
new firmwere via Qfil, then an error appears with notification:
"Download Fail: Fail to Swich on EDL "
Please help!
I`ve no idea whats to do next.
i have the same error :crying:
Can Any one HELP US
AbdElrhMan 93 said:
i have the same error :crying:
Can Any one HELP US
Click to expand...
Click to collapse
Customer service Repair it By Change Motherboard
hi
i have a huawei y 7 pro 2018 model LDN-LX2 since 2 weeks, it works perfectly , but it can't detecte the sd card. i try different sd cards ( 2,4 and 8 Go) but without résultats. please help me tp resolve the problem.
Related
Hello All,
I successfully rooted my Motorola Fire XT 531.
My device was working absolutely fine. I switched off my device to change the SIM card.
The phone is not powering on now. It just vibrates once and nothing happens.
A dim red light is showing on the extreme right top corner of my phone.
I somehow tried different things and have finally got a white screen showing on my device.
It says
MBM Flash-Mode
Domino Plus
Version: 02.06
Bootloader USB Init SECURE BOOT ENABLED.
I TRIED CONNECTING MY DEVICE TO COMPUTER BUT MY PC IS NOT DETECTING THE DEVICE.
i will be really glad if you can help me with this. ;(
Hi Please help
nitesh44 said:
Hello All,
I successfully rooted my Motorola Fire XT 531.
My device was working absolutely fine. I switched off my device to change the SIM card.
The phone is not powering on now. It just vibrates once and nothing happens.
A dim red light is showing on the extreme right top corner of my phone.
I somehow tried different things and have finally got a white screen showing on my device.
It says
MBM Flash-Mode
Domino Plus
Version: 02.06
Bootloader USB Init SECURE BOOT ENABLED.
I TRIED CONNECTING MY DEVICE TO COMPUTER BUT MY PC IS NOT DETECTING THE DEVICE.
i will be really glad if you can help me with this. ;(
Click to expand...
Click to collapse
Hey I got the same problem if you got any solutions please help me out. Thank you
Both of you have soft bricked your phones.
Try my method of unbricking fire xt.
All I require is your thanks.
HI,
I would like to ask for help. I got dead Cubot GT72e after problems with sim card reading and access for google play I try to flash rom. But on end of flashing I get red bar of end flashing. After restart phone doesn`t boot, just every 30 seconds trzing to connect to PC. How I can get working phone again please ?
?
anyone ?
Hi,
I bought a zenfone 6 from China. That is CUCC rom. I tried to change it into WW but failed. (Actually I wanted to use google services.) Then my phone got soft bricked but it was running good as before. I tried many times to convert into WW but each time could not run recovery mode. While running recovery, a usb logo with white bar appears. Sometimes the bar turns into red.
Then I downloaded Gapps for zenfone 6 and copy system folder from it into external sd card. Then I cut original system folder from my phone to external sd card to save a backup before pasting new one from Gapps. But while cutting the original system file, the phone got hanged. Then I power off the phone and try to power on again but the phone stuck on the ASUS logo. I can enter fastboot mode but can not enter recovery or hard reset because usb logo appear then.
If I enter fastboot mode, now it shows WW A600 CG. But before it was CUCC T00G. I don't know when it changed.
Please help me to solve this. Plz plz plz.
Thanks in advance.
toufiqnoor said:
Hi,
I bought a zenfone 6 from China. That is CUCC rom. I tried to change it into WW but failed. (Actually I wanted to use google services.) Then my phone got soft bricked but it was running good as before. I tried many times to convert into WW but each time could not run recovery mode. While running recovery, a usb logo with white bar appears. Sometimes the bar turns into red.
Then I downloaded Gapps for zenfone 6 and copy system folder from it into external sd card. Then I cut original system folder from my phone to external sd card to save a backup before pasting new one from Gapps. But while cutting the original system file, the phone got hanged. Then I power off the phone and try to power on again but the phone stuck on the ASUS logo. I can enter fastboot mode but can not enter recovery or hard reset because usb logo appear then.
If I enter fastboot mode, now it shows WW A600 CG. But before it was CUCC T00G. I don't know when it changed.
Please help me to solve this. Plz plz plz.
Thanks in advance.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
You can post your query in ASUS Zenfone 5 and Zenfone 6 - All you need to know about.Experts there may be able to help you.
Good Luck!
___
v7
XDA Assist
Hi i have an problem with an Idol3, i started flashing him with Panasonic Eluga Switch software but i unplugged it BEFORE i get the error (i waited 10 min after being stucked at 45%), so idol 3 is locked on Android power screen and when i launch the Panasonic soft in download mode , it give me an error at 2% error 40011 'check driver or handset', i executed the software as both admin and normal user but i didn't worked. Its not my phone and i'm helping a friend through TeamViewer, and he doesnt have another computer to test and i don't want him pay for that. So it would be cool if someone give me a possible solution. Thanks
Issou said:
Hi i have an problem with an Idol3, i started flashing him with Panasonic Eluga Switch software but i unplugged it BEFORE i get the error (i waited 10 min after being stucked at 45%), so idol 3 is locked on Android power screen and when i launch the Panasonic soft in download mode , it give me an error at 2% error 40011 'check driver or handset', i executed the software as both admin and normal user but i didn't worked. Its not my phone and i'm helping a friend through TeamViewer, and he doesnt have another computer to test and i don't want him pay for that. So it would be cool if someone give me a possible solution. Thanks
Click to expand...
Click to collapse
Try to install drivers and then try with panasonic....
:crying::crying::fingers-crossed::fingers-crossed:Help me Please!! I have Sm-j610 (J6 plus)
Initially my phone was stuck at ""sw rev check fail system fused 4 binary 3"" error due to flashing of an incorrect root file [J610FXXU1ARJ3_boot_8.1.0_AndroDef_Patch_v1] .So i tried to download its official firmware to fix it again with same baseband version (U4) and i did by odin but failed in the middle of the process and my Phone ended up showing
"An Error has occurred while updating software. Use Emergency recovery function in Smart Switch PC software""
1.But this is not the real problem,,the real problem is that this screen disappears and appears again and again when i insert phone to ODIN and it shows Added/Removed Added/Removed and keeps doing this..
2.When i take it to download mode by holding Vol"+" and"-" then inserting usb then it goes to download mode (i do by this method because its power button has stopped working due to this problem i.e phone does not power on) but again disappears instantly and repeats same problem as i told in 1st para
3. It does connect to smart mobile or odin but for 1 second...Please Help ME!! So that i can flash it again or whatever as it is bricked right now
Remove battery and then try to flash
Sent from my Redmi K20 Pro using Tapatalk
itspdp said:
Remove battery and then try to flash
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Bro,,My phone's battery is unremovable..
Should i still do that (by screwdriver)???? Any other way?? if not then i will do it...I cant buy new phone..