Hello, I am new on XDA Forums and I have a problem and I am sure that XDA Developers will help me,
Yesterday I rooted my LG G Pro Lite Dual D686 Android 4.4.2 by VRoot then I replaced the Chinese Superuser with English SuperSu, anyway I installed fonts program and while setting a font my phone shutted down suddenly, I trying to reboot, it stucks on the logo screen
some people says its called bootloop or android brick I don't know.. all what I want is fixing my problem at home and not going to anywhere because if my parents knew, it will be the end of my life, I tried to go to recovery mode by holding down volume button and power button and when the logo appears I reset the power button then select and hold it again, it asked me if I want to reset settings, I said yes and reseted my settings but still the problem occurs.
If you have a solution please inform me about it, waiting for your answers.
Have you tried flashing a new stock ROM ?
By kdz of course.
Sent from my SM-N910C using XDA Free mobile app
---------- Post added at 01:40 PM ---------- Previous post was at 01:28 PM ----------
Fouad Hamdy said:
Hello, I am new on XDA Forums and I have a problem and I am sure that XDA Developers will help me,
Yesterday I rooted my LG G Pro Lite Dual D686 Android 4.4.2 by VRoot then I replaced the Chinese Superuser with English SuperSu, anyway I installed fonts program and while setting a font my phone shutted down suddenly, I trying to reboot, it stucks on the logo screen
some people says its called bootloop or android brick I don't know.. all what I want is fixing my problem at home and not going to anywhere because if my parents knew, it will be the end of my life, I tried to go to recovery mode by holding down volume button and power button and when the logo appears I reset the power button then select and hold it again, it asked me if I want to reset settings, I said yes and reseted my settings but still the problem occurs.
If you have a solution please inform me about it, waiting for your answers.
Click to expand...
Click to collapse
Go HERE !!! you might fix your phone.
http://forum.xda-developers.com/showthread.php?t=2594480
Rohan El Matador said:
Have you tried flashing a new stock ROM ?
By kdz of course.
Sent from my SM-N910C using XDA Free mobile app
Click to expand...
Click to collapse
I actually don't understand what is flashing a new stock ROM and what is ROM..
please tell me what is it and tell me the steps of how to do it.
I succeed in entering the download mode on my LG G Pro
but the drivers doesn't install on my computer, I already installed LGUnitedMobileDrivers but I still cannot see my mobile disk on the computer..
Fouad Hamdy said:
I succeed in entering the download mode on my LG G Pro
but the drivers doesn't install on my computer, I already installed LGUnitedMobileDrivers but I still cannot see my mobile disk on the computer..
Click to expand...
Click to collapse
Wait im writing the steps be patient beccause i'm searching for the links.
Fouad Hamdy said:
Where and how to download my mobile kdz file?
also what shall I select in the flashtool? Normal Flash or CSE flash
Click to expand...
Click to collapse
Step 1 : Dowload LG United Drivers >> http://www.mediafire.com/download/8...981MAN38AP22_ML_WHQL_Ver_3.8.1(0)_4.9.8.1.zip
Install it.
Step 2 : Download LG Mobile Support Tool >> https://docs.google.com/file/d/0B0nq1tbSSc_gRk5ObE1ucm1SSHM/edit?pli=1
Extract it.
Step 3 : Choose your kdz file to download here >> http://www.lg-phone-firmware.com/index.php?id_mod=38
If you were using v10 baseband choose v10
If v20 choose v20
Choose according to your country or the nearest country.
Note : do not extract the kdz file or it will break the file.
Step 4 : Put your LG G Pro lite into Emergency Mode by switching it off,
After the phone is off then hold the Volume Down or Up ( I dnt rememnber so try only one either Up Or Down. Your screen will be yellow an says emrgency mode ) wait for the drivers to finish loading on your if doing it for the first time.
After that open The Kdz Updater file you extracted in step 2.
Then Run KDZ_FW_UPD as administrator.
See the screenshot below.
If there is error msg at the end forget it.
The program will stop responding its normal wait for it
and if it says close program close it.
Reboot your phone manually.
Else
If their is no error msg your phone will restart normally.
Note : Im not responsible for any damage. Its on your own risk. Just trying to help you.
If you follow these steps properly everything will work fine.
Hope it helped.
Rohan El Matador said:
Step 1 : Dowload LG United Drivers >>
Install it.
Step 2 : Download LG Mobile Support Tool >>
Extract it.
Step 3 : Choose your kdz file to download here >>
If you were using v10 baseband choose v10
If v20 choose v20
Choose according to your country or the nearest country.
Note : do not extract the kdz file or it will break the file.
Step 4 : Put your LG G Pro lite into Emergency Mode by switching it off,
After the phone is off then hold the Volume Down or Up ( I dnt rememnber so try only one either Up Or Down. Your screen will be yellow an says emrgency mode ) wait for the drivers to finish loading on your if doing it for the first time.
After that open The Kdz Updater file you extracted in step 2.
Then Run KDZ_FW_UPD as administrator.
See the screenshot below.
If there is error msg at the end forget it.
The program will stop responding its normal wait for it
and if it says close program close it.
Reboot your phone manually.
Else
If their is no error msg your phone will restart normally.
Note : Im not responsible for any damage. Its on your own risk. Just trying to help you.
If you follow these steps properly everything will work fine.
Hope it helped.
Click to expand...
Click to collapse
What is V10 and V20? and wtf is baseband, explain please.
Anybody please help!
IN THIS HUGE SITE/FORUM THERE IS NO ANY PERSON TO HELP?
I downloaded V20B
but as you said, it gives me program stopped working error, I rebooted my mobile and started download mod (emergency mode doesn't work..) but still gives me the error, I am using the LGFlashTool in the topic u provided at the first, I used ur program but gives error too even when I reboot
REMEMBER, MY PHONE DOESN'T EVEN OPEN, ITS STUCK ON THE LOGO SCREEN (BRICKED)
Forget aboutd baseband. Do you remember what firmware your phone was using. In the "about device" v20(A,B....) or v10(A,B....). If you know it tell me.Otherwise i wont be able to help you.
Sent from my SM-N910C using XDA Free mobile app
---------- Post added at 08:18 PM ---------- Previous post was at 07:46 PM ----------
Fouad Hamdy said:
What is V10 and V20? and wtf is baseband, explain please.
Click to expand...
Click to collapse
i made a mistake.
v10 and v20 are the firmware versions of your phone.
baseband consist of radio and mobile signal that enables you to communicate.
---------- Post added at 08:32 PM ---------- Previous post was at 08:18 PM ----------
Fouad Hamdy said:
I downloaded V20B
but as you said, it gives me program stopped working error, I rebooted my mobile and started download mod (emergency mode doesn't work..) but still gives me the error, I am using the LGFlashTool in the topic u provided at the first, I used ur program but gives error too even when I reboot
REMEMBER, MY PHONE DOESN'T EVEN OPEN, ITS STUCK ON THE LOGO SCREEN (BRICKED)
Click to expand...
Click to collapse
I forget to mention in step 4. After turning off the phone remove the battery. The hold volume down key and conect the usb cable in your pc first and then to your phone. Do not release the volume down key until you get emergency mode.
After updrage the pc program will crash and it will dispaly close program dialog.
close it and remove your usb and insert your baterry.
Now your phone should boot up. It will take some time plz be patient.
dear friend
i have y511-u30...unfortunately i wipe system partition and my phone hang on start and i have not access to recovery or anything.i found a article about flash phone with sp flash tools and i did it but now my phone do not turn on at all and in sp flash tools not found my phone .in my computer (win7) in device manager for some second comes an item : Android usb ethernet/rndis and after seconds gone.please help me with this .i really need my phone.thanks
strix666 said:
dear friend
i have y511-u30...unfortunately i wipe system partition and my phone hang on start and i have not access to recovery or anything.i found a article about flash phone with sp flash tools and i did it but now my phone do not turn on at all and in sp flash tools not found my phone .in my computer (win7) in device manager for some second comes an item : Android usb ethernet/rndis and after seconds gone.please help me with this .i really need my phone.thanks
Click to expand...
Click to collapse
hello strix666 unfortunately your problem may not be fixed for some causes :
1. your phone is a low quality phone (sorry for saying that)
2.before huawei created the phone some documents leaked and many companies created clones with much lower quality
3. this is a common problem with this model of huawei phone so don't be surprised if it has gone BRICKED without anything
and i wanted to know what were you doing with the phone (with details) before that happens and did you try to had reset it?
paywand said:
hello strix666 unfortunately your problem may not be fixed for some causes :
1. your phone is a low quality phone (sorry for saying that)
2.before huawei created the phone some documents leaked and many companies created clones with much lower quality
3. this is a common problem with this model of huawei phone so don't be surprised if it has gone BRICKED without anything
and i wanted to know what were you doing with the phone (with details) before that happens and did you try to had reset it?
Click to expand...
Click to collapse
Dear sulaimaniyah,
thank you and i appreciated for honest answer, i instal a recovery that support touch and have so many features (recovery_TWRP_2.6.3.0) . i go to wipe section and wipe system partition.after restart phone my phone just stay on the logo huawei and do nothing.i try to flash my phone with SP flash tools but after 2time failed in process (i think because of wrong files that i chosen) .that logo doesn't show and my phone doesn't turn on and show nothing .in my computer in device manager comes an item with name Android Usb Ethernet/rndis but with yellow mark and i try so many drivers but still nothing.and for hard reset i have not access to any function.
strix666 said:
Dear sulaimaniyah,
thank you and i appreciated for honest answer, i instal a recovery that support touch and have so many features (recovery_TWRP_2.6.3.0) . i go to wipe section and wipe system partition.after restart phone my phone just stay on the logo huawei and do nothing.i try to flash my phone with SP flash tools but after 2time failed in process (i think because of wrong files that i chosen) .that logo doesn't show and my phone doesn't turn on and show nothing .in my computer in device manager comes an item with name Android Usb Ethernet/rndis but with yellow mark and i try so many drivers but still nothing.and for hard reset i have not access to any function.
Click to expand...
Click to collapse
dear strix666
i'm very sorry but the (recovery_TWRP_2.6.3.0) is a recovery used for lenovo phones specially lenovo p780 and as the most common results there are 3 things that happen :-
1. the phone gets bricked possibility : %70 (your current phone situation)
2. the phone gets stuck in a boot loop possibility : %22 ( thats what happened to your phone at the first flash )
3. the phone stays safe and nothing happens possibility : %8 ( impossible )
and so after you tried to fix it by flashing it 2 times again it is commonly bricked which can't be fixed easily and the only way to fix it is by using apps similar to odin.
but before that i need to need know some other details :-
1. does it charge or show the charging icon?
2. try to hold the volume down and power key for about 15 seconds anything happened?
3. connect it to your pc and go to | start menu > devices and printer > right click your device > troubleshoot
and if it doesn't appear please tell me.
by the way my name is paywand and sulaimaniyah is my city
Hi i have an problem with an Idol3, i started flashing him with Panasonic Eluga Switch software but i unplugged it BEFORE i get the error (i waited 10 min after being stucked at 45%), so idol 3 is locked on Android power screen and when i launch the Panasonic soft in download mode , it give me an error at 2% error 40011 'check driver or handset', i executed the software as both admin and normal user but i didn't worked. Its not my phone and i'm helping a friend through TeamViewer, and he doesnt have another computer to test and i don't want him pay for that. So it would be cool if someone give me a possible solution. Thanks
Issou said:
Hi i have an problem with an Idol3, i started flashing him with Panasonic Eluga Switch software but i unplugged it BEFORE i get the error (i waited 10 min after being stucked at 45%), so idol 3 is locked on Android power screen and when i launch the Panasonic soft in download mode , it give me an error at 2% error 40011 'check driver or handset', i executed the software as both admin and normal user but i didn't worked. Its not my phone and i'm helping a friend through TeamViewer, and he doesnt have another computer to test and i don't want him pay for that. So it would be cool if someone give me a possible solution. Thanks
Click to expand...
Click to collapse
Try to install drivers and then try with panasonic....
I used Lineage os for 2 months . then I want to get my stock ROM back so I restored it from twrp and after restoration completed I found my phone IMEI no was empty and network not working so. I again install Lineage Os then Lineage boot animation started as normally but after 5 min black screen appears and my phone screen starts blinking Lenovo logo comes and then automatic power off this process happeneds again and again. So I tried to open twrp recovery but unfortunately its also not opening . now I have left fastboot mode and download mode .
I see many threads then I QFIL application that helps in flashing stock ROM I tried many time but my laptop always says sahara fail or sahara error. I am tired of that fail . I tried latest and old version of QFIL but not working in my laptop .... Can anyone help plz .....
Can I can install stock ROM with fastboot mode if yes plz guide me and give me fastboot commands ...
Thanks for making your precious time for reading my thread .....
Try to Clear Windows Registry , with CCleaner , Open Qfil with Administrator put firmware , remove battery , press vol + and power key , plug in battery and plug usb in , wait when the COM port is detected on Qfil , and start flash .
What is unable to flash download using sahara protocol ?? Why this happeneds ??
Hello everyone, I hope you are very well.
A few days ago, a family brought me a phone to try to fix it, it is an LG MS330.
The phone turns on, shows the typical LG logo and after a few seconds it shows the message:
Security Error
[Authentication Fail # 9] [MODIFIED]
Click to expand...
Click to collapse
Which makes me think that someone installed an unofficial firmware on it and was what caused the problem. Everything normal up to here, the real problem happens when I try to flash the device through the download mode, where it shows me the following error:
Secure booting Error!
Error code : 1009
MODIFIED !!
Click to expand...
Click to collapse
After a few seconds of throwing this error, the phone automatically shuts down and restarts.
The real problem is that it does not let me under any circumstances flash the firmware of the phone and I also cannot create the connection between the computer and the phone to be able to flash it.
I have tried various programs such as LG Flash Tool, LG UP, LG Mobile Support and have not been successful with any.
Could anyone help me please?
I really don't know what to do at this point anymore. Does the phone have salvation? Is there something that can be done?