Hi,
I bought a zenfone 6 from China. That is CUCC rom. I tried to change it into WW but failed. (Actually I wanted to use google services.) Then my phone got soft bricked but it was running good as before. I tried many times to convert into WW but each time could not run recovery mode. While running recovery, a usb logo with white bar appears. Sometimes the bar turns into red.
Then I downloaded Gapps for zenfone 6 and copy system folder from it into external sd card. Then I cut original system folder from my phone to external sd card to save a backup before pasting new one from Gapps. But while cutting the original system file, the phone got hanged. Then I power off the phone and try to power on again but the phone stuck on the ASUS logo. I can enter fastboot mode but can not enter recovery or hard reset because usb logo appear then.
If I enter fastboot mode, now it shows WW A600 CG. But before it was CUCC T00G. I don't know when it changed.
Please help me to solve this. Plz plz plz.
Thanks in advance.
toufiqnoor said:
Hi,
I bought a zenfone 6 from China. That is CUCC rom. I tried to change it into WW but failed. (Actually I wanted to use google services.) Then my phone got soft bricked but it was running good as before. I tried many times to convert into WW but each time could not run recovery mode. While running recovery, a usb logo with white bar appears. Sometimes the bar turns into red.
Then I downloaded Gapps for zenfone 6 and copy system folder from it into external sd card. Then I cut original system folder from my phone to external sd card to save a backup before pasting new one from Gapps. But while cutting the original system file, the phone got hanged. Then I power off the phone and try to power on again but the phone stuck on the ASUS logo. I can enter fastboot mode but can not enter recovery or hard reset because usb logo appear then.
If I enter fastboot mode, now it shows WW A600 CG. But before it was CUCC T00G. I don't know when it changed.
Please help me to solve this. Plz plz plz.
Thanks in advance.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
You can post your query in ASUS Zenfone 5 and Zenfone 6 - All you need to know about.Experts there may be able to help you.
Good Luck!
___
v7
XDA Assist
Related
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone
Hi all:crying:
Description :
A1: The system.img.gz you applied, wasn't suiting to the firmware version installed on your tablet. Download latest Acer firmware update, copy it on a micro sd card, plug it into your Iconia, go to recovery by holding Volume up and Power button while device is turned off. Then choose apply update from sd card.
A2: If you cannot apply any Acer firmware, because you always get a partition error while installing, you should do a reboot after you get the error. A user reported that this made her/his device boot into Android again, showing the new version in settings -> info. Good luck
A3: If the A1 and A2 didn't help. Send back the device to Acer. Tell them you tried to apply an update from sd card and ended up in this bootloop. Sending device back to Acer over UPS is free. Good luck!
I failed root my AIT A1 and now im trapped in bootloap (my fault,RTFM fail.) I try find somewhere *.zip with official FW to apply it back trough recovery. Got any one advice how solve this issue? On acer.com is nothing usefull.I know how fix but cant find files witch i need....Ty for your time and LINKS...or Ideas
Help ...
I have same problem :crying:
QUOTE=MaCZalla;46183161]Hi all:crying:
Description :
A1: The system.img.gz you applied, wasn't suiting to the firmware version installed on your tablet. Download latest Acer firmware update, copy it on a micro sd card, plug it into your Iconia, go to recovery by holding Volume up and Power button while device is turned off. Then choose apply update from sd card.
A2: If you cannot apply any Acer firmware, because you always get a partition error while installing, you should do a reboot after you get the error. A user reported that this made her/his device boot into Android again, showing the new version in settings -> info. Good luck
A3: If the A1 and A2 didn't help. Send back the device to Acer. Tell them you tried to apply an update from sd card and ended up in this bootloop. Sending device back to Acer over UPS is free. Good luck!
I failed root my AIT A1 and now im trapped in bootloap (my fault,RTFM fail.) I try find somewhere *.zip with official FW to apply it back trough recovery. Got any one advice how solve this issue? On acer.com is nothing usefull.I know how fix but cant find files witch i need....Ty for your time and LINKS...or Ideas[/QUOTE]
A1-811 howto ROM backup
Well, I'd like to do a backup An original ROM. I do not know how this could be achieved. I think it would help a lot of people.
MaCZalla said:
Hi all:crying:
Description :
A1: The system.img.gz you applied, wasn't suiting to the firmware version installed on your tablet. Download latest Acer firmware update, copy it on a micro sd card, plug it into your Iconia, go to recovery by holding Volume up and Power button while device is turned off. Then choose apply update from sd card.
A2: If you cannot apply any Acer firmware, because you always get a partition error while installing, you should do a reboot after you get the error. A user reported that this made her/his device boot into Android again, showing the new version in settings -> info. Good luck
A3: If the A1 and A2 didn't help. Send back the device to Acer. Tell them you tried to apply an update from sd card and ended up in this bootloop. Sending device back to Acer over UPS is free. Good luck!
I failed root my AIT A1 and now im trapped in bootloap (my fault,RTFM fail.) I try find somewhere *.zip with official FW to apply it back trough recovery. Got any one advice how solve this issue? On acer.com is nothing usefull.I know how fix but cant find files witch i need....Ty for your time and LINKS...or Ideas
Click to expand...
Click to collapse
Have you unlocked you tablet? If you have, why not use a custom recovery (TWRP for example is a powerful yet simple to use recovery)? If you haven't, then it was a bad idea trying to root your tablet.
Please reply so that I can help.
Reupload A1-811 ROM
Can anyone reupload the original stock ROM? I want to unbrick my tab but hotfile.com link from the first page is down
Thank you
In case anyone else ends up in this thread, the solution to get an A1-811 out of a bootloop, ie. "unbrick" it, please follow the Firmwares for flashing - [EN] guide from this thread:
http://forum.xda-developers.com/android/general/acer-ax-b1-t2875894
A1-811
pls give me link dwnload custom ROM A1-811
Hi acer devils I need your help: "My acer iconia a1-811 show logo acer and then black screen".
No recovery... Nothing! Someone can help me?
extrem84 said:
Hi acer devils I need your help: "My acer iconia a1-811 show logo acer and then black screen".
No recovery... Nothing! Someone can help me?
Click to expand...
Click to collapse
I have similar but can still go into recovery. In recov the internal sdcard won't mount, so I just think the memory is fried...
Unless you're prepared to solder stuff or replace the MB I don't think there's much we can do...
nikagl said:
I have similar but can still go into recovery. In recov the internal sdcard won't mount, so I just think the memory is fried...
Unless you're prepared to solder stuff or replace the MB I don't think there's much we can do...
Click to expand...
Click to collapse
Thank you for your answer. I tried to flash, but this stupid tab continue to turn on :crying:
If i can't flash... do you know where to buy a memory to solder??
extrem84 said:
Thank you for your answer. I tried to flash, but this stupid tab continue to turn on :crying:
If i can't flash... do you know where to buy a memory to solder??
Click to expand...
Click to collapse
I honestly have no idea. I would search for partnumbers and order stuff in China (eBay)
Guys I have an Asus Memo Pad HD 7 8GB
Model number : ME173x
Android version : 4.2.2
Kernal Version : 3.4.5
I have this problem with my tablet is that it freezes with a white screen randomly when i am working. It happen when I am playing games, listening to music, and sometime when I am just sliding through the menu. I tried hard resetting and deleting he cache as mentioned as some fixes for this problem. But it keeps happening.
# and I encountered another problem. When I go to the recovery mode, I see the Android bot lying with the chest open saying 'no command'.
I looked at some guides and tried to install a custom ROM. I successfully rooted my device. BUT no matter how I follow the tutorials I can't continue from there. I don't know how to install CWM to my device ....
can anyone pleas help me to do this ?
I tried a lot of tutorials ... some recommended using ROM MAnager. But it says my device doesn't have a compatible CWM version.
I tried copying CWM.img file to the SD card and boot via recovery mode ... but then again the bot laying with the chest open pops up ...
plz help me guys ...
Thanks ...
And pardon me for my English ....
Legendkiller12345 said:
Guys I have an Asus Memo Pad HD 7 8GB
Model number : ME173x
Android version : 4.2.2
Kernal Version : 3.4.5
I have this problem with my tablet is that it freezes with a white screen randomly when i am working. It happen when I am playing games, listening to music, and sometime when I am just sliding through the menu. I tried hard resetting and deleting he cache as mentioned as some fixes for this problem. But it keeps happening.
# and I encountered another problem. When I go to the recovery mode, I see the Android bot lying with the chest open saying 'no command'.
I looked at some guides and tried to install a custom ROM. I successfully rooted my device. BUT no matter how I follow the tutorials I can't continue from there. I don't know how to install CWM to my device ....
can anyone pleas help me to do this ?
I tried a lot of tutorials ... some recommended using ROM MAnager. But it says my device doesn't have a compatible CWM version.
I tried copying CWM.img file to the SD card and boot via recovery mode ... but then again the bot laying with the chest open pops up ...
Click to expand...
Click to collapse
Are you able to access fastboot mode from bootloader menu?
If no, Enable USB Debugging in Developer Options from Settings.
Make sure you have your phone's drivers installed in your phone.
Install Minimal ADB and fastboot.
Then connect your phone to PC. Open the shortcut of Minimal ADB and fastboot.
Type:
Code:
adb devices
adb reboot bootloader
From here, now you can boot up CWM.img and do whatever flashing you want from the tutorials you saw.
I need Help My Lenovo Yoga tab 3 8 inch (850M) was soft bricked after using superSu me to replace kingsu with SuperSU.
After its finish it was working good until i restarted my device it keeps showing black powered screen with nothing even not the floating home,back bar.
Then i`ve tried to boot into recovery and wipe data and factory reset then i restart my device.
and now it stuck at lenovo logo and not showing anything else.
Then I`ve thought i should download stock rom zip and I`ve already downloaded 2 Stock roms from different sites and i put them into SD card then i have tried to flash it after wiping data but
It also stuck in verifying package data while flashing and i`ve waited about 1 hour with nothing new.
Then I have tried to flash it using ADB update, but it keeps telling cancelled
After all of these trials i thought if i replace the recovery by new recovery it`ll work
but I didn`t find how to access download mode in my tab ( the tab has no hard home button) and i `ve tried booting into download mode using ADB but also failed
Then I found a tool called SP Flash Tool but it needs a scatter loading file which i didn`t find !
I donno what else should I do I need help please
aman_a7med said:
I need Help My Lenovo Yoga tab 3 8 inch (850M) was soft bricked after using superSu me to replace kingsu with SuperSU.
After its finish it was working good until i restarted my device it keeps showing black powered screen with nothing even not the floating home,back bar.
Then i`ve tried to boot into recovery and wipe data and factory reset then i restart my device.
and now it stuck at lenovo logo and not showing anything else.
Then I`ve thought i should download stock rom zip and I`ve already downloaded 2 Stock roms from different sites and i put them into SD card then i have tried to flash it after wiping data but
It also stuck in verifying package data while flashing and i`ve waited about 1 hour with nothing new.
Then I have tried to flash it using ADB update, but it keeps telling cancelled
After all of these trials i thought if i replace the recovery by new recovery it`ll work
but I didn`t find how to access download mode in my tab ( the tab has no hard home button) and i `ve tried booting into download mode using ADB but also failed
Then I found a tool called SP Flash Tool but it needs a scatter loading file which i didn`t find !
I donno what else should I do I need help please
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider posting your question in a friendly ask any question thread found here:
http://forum.xda-developers.com/showthread.php?t=2259645
You'll find expert advice there.
Good luck!
Hi guys, i'm desperately writing this thread after asking for help in the Oppo Community forum without no luck.
I know that this is for R7 Plus but i hope that someone could help me with my beloved R7s.
Months ago i've succefully installed the Project Spectrum ROM and it worked fine until few weeks ago when i noticed a random system slow down, maybe after an automatic app update.
I tryed to uninstall few apps and reboot the phone several times but with no luck.
So i decided to wipe it and reinstall the Color OS following the walkthrough but something went wrong and now my OPPO R7s is in a strange bootloop without recovery and fastboot.
The strange things are these:
- if I press the power button all I can see is the OPPO Logo and the loading dots in slow-mo
- if i connect it directly to a Windows PC it is recognized as a generic "Android" terminal.
- if i connect it to a Windows PC pressing and holding POWER + VOLUME DOWN + VOLUME UP it's recognized as a QHSUSB_BULK
I'm not a noob, neither an engineer, but i've a bit of familiarity with computers and similar things so i've tried to follow this guide:
http://community.oppo.com/en/forum.php?mod=viewthread&tid=48654
Downloading this service repair rom : https://drive.google.com/file/d/0BybDE_sPI3b5cmgtU05fbXNobVU/view (from this related discussion : http://forum.xda-developers.com/r7-plus/help/r7s-service-romqpst-unbrick-t3493377)
Following the guide, when i try to execute MSM8x39Downloadtool.exe selecting the phone model (i've three choices xx080_32G, xx081_32G, xx082_32G - and i don't know which one is the correct one) the phone is not recognized as COM CONNECTED in none of the ports. If I also do the verification, clicking on the top right button, it shows FAILED on system.img file.
Can that be the problem?
I'm stuck guys and i don't know what to do.
Any help will be better then a christmas present
Thanks in advance!!
A.
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
kishd said:
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
Click to expand...
Click to collapse
Thanks kishd i'll give this a try!
The only thing i'm bit worried about is how to flash from the internal sd without recovery mode and fastboot...
I'll keep you updated!:good:
any news?did you manage to fix?
hello guys
i have a problem with my oppo RS7
it has a hard bricked and stucked on booting and booting..... I only have a MacBook Pro and not windows
is anyone over there that knows exactly how to unbrick it using a Mac ?!