Related
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
shubham412302 said:
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
Click to expand...
Click to collapse
maybe you can flash the b500 again?
shubham412302 said:
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
Click to expand...
Click to collapse
Hi,
The same boot loop error also I encountered , and here is how i solved it.
1. First U need to download this tool -> HONOR_6_and_6Plus_Multi-Tool
2. run the Honor6MultiTool.bat
3. it will ask to install universal ADB driver. follow the instruction and install
4. then 6th option will be UNBRICK, Enter ur choice: 6
5. Then u follow the instruction
After that the phone will boot.
If any problem will occur do comment below.
All The Best!!
biswajit_kar said:
Hi,
The same boot loop error also I encountered , and here is how i solved it.
1. First U need to download this tool -> HONOR_6_and_6Plus_Multi-Tool
2. run the Honor6MultiTool.bat
3. it will ask to install universal ADB driver. follow the instruction and install
4. then 6th option will be UNBRICK, Enter ur choice: 6
5. Then u follow the instruction
After that the phone will boot.
If any problem will occur do comment below.
All The Best!!
Click to expand...
Click to collapse
the device does not enters fastboot mode just show the bootlogo
it enters fastboot but still the device wont boot
can you tell me the commands to flash all files from the update.app from fastboot
maybe that will solve the issue
DOWNLOAD stock firmware (update.app) extract from it Recovery.img system.img boot.img cache.img cust.img.and userdata.img. then turn your mobile in fastboot and connect to usb, open CMD in PC and write CD "path to adb.exe", when you are there, copy extracted files there too and write in CMD this lines:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
when you will finish write FASTBOOT REBOOT and that's all
Sent from my H60-L04 using XDA Free mobile app
Following. Reply if what Biswajit told you worked in reverting from Lollipop. Have you done this yourself Biswajit?
biswajit_kar said:
DOWNLOAD stock firmware (update.app) extract from it Recovery.img system.img boot.img cache.img cust.img.and userdata.img. then turn your mobile in fastboot and connect to usb, open CMD in PC and write CD "path to adb.exe", when you are there, copy extracted files there too and write in CMD this lines:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
when you will finish write FASTBOOT REBOOT and that's all
Sent from my H60-L04 using XDA Free mobile app
Click to expand...
Click to collapse
i tried this already but it did not work
i think flashing all the 22 files from the update.app file will work
or i have to wait till the lollipop update file comes out
my bootloader is unlocked so will my device be repaired under warranty(huawei didn't mentioned voiding warranty by unlocking bootloader while getting the code)
shubham412302 said:
i tried this already but it did not work
i think flashing all the 22 files from the update.app file will work
or i have to wait till the lollipop update file comes out
my bootloader is unlocked so will my device be repaired under warranty(huawei didn't mentioned voiding warranty by unlocking bootloader while getting the code)
Click to expand...
Click to collapse
Yes.
Though You can relock that by using the tool HONOR_6_and_6Plus_multi_tool from here .
try it. wish u luck.
http://forum.xda-developers.com/showthread.php?t=3142268
shubh_007 said:
http://forum.xda-developers.com/showthread.php?t=3142268
Click to expand...
Click to collapse
That would have worked but i already gave my phone to the service centre
shubham412302 said:
the device does not enters fastboot mode just show the bootlogo
it enters fastboot but still the device wont boot
can you tell me the commands to flash all files from the update.app from fastboot
maybe that will solve the issue
Click to expand...
Click to collapse
try this method
http://forum.xda-developers.com/honor-6/general/revert-h60-l04-emui-3-1-to-emui-3-0-t3142268
After no successful firmware honor+ PE-TL10 does not start when you turn on a few seconds hangs on Android logo, then goes out and some times the indicator flashes red and green, firmware method three buttons does not start.
In recovery is not included in the mode bootloader.
Bootloader is locked. What to do?
andrei1269 said:
After no successful firmware honor+ PE-TL10 does not start when you turn on a few seconds hangs on Android logo, then goes out and some times the indicator flashes red and green, firmware method three buttons does not start.
In recovery is not included in the mode bootloader.
Bootloader is locked. What to do?
Click to expand...
Click to collapse
I have the same issue. Did you ever find a solution?
Fix for this issue
Hi! I have the same problem and i fix it.
How to?
1. U need to unclock bootloader first
2. Downolad software 4.4.2 hihonor.com/pl/support/software-list/index.htm and put UPDATE.app file in scdard dload folder
3. Extract recovery.img boot.img cust.img system.img with Huawei Update Extractor (put them to the adb folder)
4. Enter to fastboot mode (vol - and plug the usb cable)
5. Flash via fastboot with command:
- flash fastboot recovery RECOVERY.img
- flash fastboot boot BOOT.img
- flash fastboot cust CUST.img
- flash fastboot system SYSTEM.img
6. Unplug cable and click vol+, vol- and power and Keep far until the update process will begin
7. If process crash shut down system
8. Click vol+ and power and hold
9. In emui recovery do wipe data/factory reset and wipe cache
10. Reboot system and phone will stats.
Sorry for my english but i want to help
you can even simply flash that update.app ,
comand not alowed
In this thread u can find "HOW TO COMPLETLY RELOCK DEVICE" / UNBRICK TUTORIAL
" ADB COMMAND METHOD":
In this method You can find how to unbrick device
If your device is only capable to access fastboot mode only
1.Find your stock firmware HERE
2.DOWNLOAD HuaweiUpdate extrator below in download section
3.open HuaweiUpdateExtractor select the update.app which was extracted from firmware zip
4.then extract the following files :::
1.boot .img
2.cust.img
3.recovery.img
4.system.img
Then boot your device into fastboot ,open adb command then flash
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
6. fastboot reboot
device is now working but bootloader is still unlocked.
to lock the bootloader reboot your device into fastboot mode type ::: fastboot oem lock (your 16 digit bootloader code)
if it fails then copy the update.app which was extrated earlier into sd card / dload
then force update by pow+volume +&volume-
THAT'S it UR DEVICE IS NOW FULLY LOCKED.
FOR VIDEO TUTORIAL :::https://youtu.be/OMKDnBqbi3U
Hey Guys,
I've tried to root my phone and while falshing the TWRP Recovery an Error occured.
Code:
C:\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.754s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.763s
So I thought I could exit the menu by typing "fastboot reboot". Now I'm stuck in in that startup window "Your device has been unlocked and can´t be trusted" and have 3 options:
(1) Press Power Key to continue.
(2) Press Vol...
(3) ...
If I press the power button its just rebooting and everything starts from beginning and if I'm trying to recover it my phone cant connect to the wifi "Getting package info failed".
HiSuite and usb debugging aren´t working.
Did I broke my Phone or is there a way to fix it?
Sorry for my bad englich ^^.
Thank you! Musark.
Hi,
Musark said:
fastboot boot twrp.img
Click to expand...
Click to collapse
this is the wrong command for flashing a recovery. You should type: "fastboot flash recovery twrp.img".
In case you still get this error then:
Musark said:
FAILED (remote: Command not allowed)
Click to expand...
Click to collapse
It's usually because your bootloader is still or again locked.
LinuxKernel said:
Hi,
this is the wrong command for flashing a recovery. You should type: "fastboot flash recovery twrp.img".
In case you still get this error then:
It's usually because your bootloader is still or again locked.
Click to expand...
Click to collapse
I followed the tutorial "How to Root Honor 6X [100% Working]" from CyberKey (can't post links at the moment).
Everything was fine until I wanted to boot my phone.
At least i want to use my Phone.
I rode a lot about dload but I've only found tutorials where i need access to my phone.
Could someone give me a link for a tutorial?
Musark said:
I followed the tutorial "How to Root Honor 6X [100% Working]" from CyberKey (can't post links at the moment).
Everything was fine until I wanted to boot my phone.
Click to expand...
Click to collapse
It's because the tutorial you followed is wrong when it comes to flashing the twrp recovery. It seems like you flashed the recovery image to the wrong partition (boot).
If you want to install a custom rom:
1. Put your phone into fastboot mode
2. Use the command: fastboot flash recovery twrp.img
3. Flash any custom rom
If you want to get the stock rom running again:
Way1:
1. Download the right stock recovery for your phone (marshmallow recovery if you want to flash marshmallow and nougat recovery if you want to install the nougat stock rom)
2. Put your phone into fastboot mode
3. Use the command: fastboot flash recovery recovery.img
4. Download the right firmware for your phone and extract the files
5. Create the "dload" folder on your external sd card
6. Put the update.app from the extracted files into your "dload" folder
7. Power off your phone
8. Hold volume up + volume down + power button until the honor logo appears. Wait until the phone boots into stock recovery and installs the stock rom.
Way2.
1. If you know which version of stock rom you had installed, e.g. B360 you can download the same firmware version again.
2. Use huawei firmware extractor to extract recovery.img and boot.img
3. Put your phone into fastboot mode
4. Use the command: fastboot flash recovery recovery.img
5. Use the command: fastboot flash boot boot.img
6. Reboot your phone (fastboot reboot)
In general you can also install any rom via fastboot:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot flash recovery recovery.img
LinuxKernel said:
If you want to get the stock rom running again:
Way1:
1. Download the right stock recovery for your phone (marshmallow recovery if you want to flash marshmallow and nougat recovery if you want to install the nougat stock rom)
2. Put your phone into fastboot mode
3. Use the command: fastboot flash recovery recovery.img
4. Download the right firmware for your phone and extract the files
5. Create the "dload" folder on your external sd card
6. Put the update.app from the extracted files into your "dload" folder
7. Power off your phone
8. Hold volume up + volume down + power button until the honor logo appears. Wait until the phone boots into stock recovery and installs the stock rom.
Click to expand...
Click to collapse
Wow Thanks, I've only 1 question. My computer isnt noticing that my phone is connected with him via usb.
How can i access my sd card without HiSuite or usb debugging? I could also put my sd card in a diffrent phone, but i think thats not the usual way.
Musark said:
Wow Thanks, I've only 1 question. My computer isnt noticing that my phone is connected with him via usb.
How can i access my sd card without HiSuite or usb debugging? I could also put my sd card in a diffrent phone, but i think thats not the usual way.
Click to expand...
Click to collapse
If you have no running rom on your phone, then as far as I know only via TWRP or as you already mentioned by another phone.
My phone is working fine now thanks.
Musark said:
My phone is working fine now thanks.
Click to expand...
Click to collapse
Good, next time, try installing it through TWRP app (if you are rooted) it's easier
LinuxKernel said:
It's because the tutorial you followed is wrong when it comes to flashing the twrp recovery. It seems like you flashed the recovery image to the wrong partition (boot).
If you want to install a custom rom:
1. Put your phone into fastboot mode
2. Use the command: fastboot flash recovery twrp.img
3. Flash any custom rom
If you want to get the stock rom running again:
Way1:
1. Download the right stock recovery for your phone (marshmallow recovery if you want to flash marshmallow and nougat recovery if you want to install the nougat stock rom)
2. Put your phone into fastboot mode
3. Use the command: fastboot flash recovery recovery.img
4. Download the right firmware for your phone and extract the files
5. Create the "dload" folder on your external sd card
6. Put the update.app from the extracted files into your "dload" folder
7. Power off your phone
8. Hold volume up + volume down + power button until the honor logo appears. Wait until the phone boots into stock recovery and installs the stock rom.
Way2.
1. If you know which version of stock rom you had installed, e.g. B360 you can download the same firmware version again.
2. Use huawei firmware extractor to extract recovery.img and boot.img
3. Put your phone into fastboot mode
4. Use the command: fastboot flash recovery recovery.img
5. Use the command: fastboot flash boot boot.img
6. Reboot your phone (fastboot reboot)
In general you can also install any rom via fastboot:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
i tried all previous mensioned method
i got stock firm ware and some custom rom from huawei support and xda developers
i tried dload method saying system update failed
itried fastboot flash recovery twrp.img
done
but i tried adb reboot recovery saying device not found
tried fastboot reboot done
my previous version was BLN-L22C675B360
please provied me with suitable firm ware and way to flash it
or tell me atleast how to go to twrp on fastboot mode when adb reboot recovery saying device not found
Thanks in advance
rom link plz
Musark said:
My phone is working fine now thanks.
Click to expand...
Click to collapse
give me rom link please on message or how did u get access to twrp tell me
AIO GUIDE TECNO KD7
1. Bootloader Unlocking
1. Download & install the ADB driver
2.Enable devloper mode by taping on Build verson(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd
command: ADB devices
then reboot to bootloader
command: ADB reboot bootloader
4. unlock bootloader
command: fastboot flashing unlock the phone will ask to confirm
5. now reboot to system
command:fastboot reboot
If you are stuck waiting for the device screen
2. TWRP [unoficial]
https://forum.xda-developers.com/t/twrp-recovery-for-tecno-kd7.4378493/
3. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link: Orange disabler.zip
4. Root
1.boot into recovery
2. Flash magisk .zip
llink:https://github.com/topjohnwu/Magisk/releases/download/v21.0/Magisk-v21.0.zip
3.1. Unroot
1.boot into recovery
2. Flash magisk unistaller .zip
link:https://github.com/topjohnwu/Magisk/releases/download/v21.0/Magisk-uninstaller-20201003.zip
5.Stock Firmware Files
Stock boot ,stock recovery & Full Firmware are added
To Flash full firmware
Extract zip & run flash.bat
Link: TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404-fastboot flash full rom.zip
6. Gsi rom / Custom rom Installation guide:
https://forum.xda-developers.com/t/custom-rom-for-tecno-phone-dynamic-partition.4379341/
vendor : ( 3 sim problem guide )
TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404
7. Phone Hard Brick fix
https://forum.xda-developers.com/t/phone-soft-brick-phone-on-off-poblem-tecno-device.4378501/
7.1. Flash file:
Link :
TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404
HIT THE THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
Tecno kd7 full guide
https://forum.xda-developers.com/t/...r-unlocking-root-twrp-stock-firmware.4345557/
What do you mean by boot into recovery? Going fastboot mode? And then writing fastboot flash recovery magisk.zip( for step 3(root)) ?
Also should have the updatest kd7 before rooting?
Thanks in advance for your hard work.
Tanjin01: Thanks
Fast time twrp recovery install: (any bulid version)
[command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option->Format Data -> yes Format.
Next, Reboot option -> recovery click Wait reboot recovery and flash magisk.zip
Any time root and unroot:
2.going to recovery
Open recovery and install magisk zip. /Magisk uninstall flash
Parvej789 said:
Tanjin01: Thanks
Fast time twrp recovery install: (any bulid version)
1.Fastboot flash recovery .
Fastboot reboot recovery -
Open recovery -wipe format data-yes.
reboot to recovery
and install magisk zip.
Any time root and unroot:
2.going to recovery
Open recovery and install magisk zip. /Magisk uninstall
Click to expand...
Click to collapse
Thank a bunch for consist help with my nobby question(s)!
Correct me if i am wrong before i procced,
Fire up pc, open terminal/cmd and writing the following one after another
[Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
[command]
Now i boot into twrp recovery and from there "wipe data". Then "advanced wipe" with delvic cache.
Next, again, twrp recovery and flash magisk.zip
Right?
Tanzin01
[Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now i boot into twrp recovery and from there "wipe ". Then "Format Data" with yes Format.
Next, Reboot to recovery .again, twrp recovery and flash magisk.zip
Right?
Thanks man. Have a nice day&life
hey man, all went well till format. in format i saw some error, eg failed to mount /data(something like this). Any idaea why i got this?
[i got a success msg though]]
also can i access twrp recovery mode via volume and power button?(i tried volume up+power button but got adnroid image with "No command".)
Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option ->Format Data -> yes Format .
Next,
Reboot options -> recovery click Wait reboot to recovery and magisk.zip flash
Parvej789 said:
Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now i boot into twrp recovery and from there "wipe ". Then "Format Data" with yes Format.
Next,
Reboot options to recovery .again, twrp recovery and flash magisk.zip
Right?
Click to expand...
Click to collapse
All the commands worked smoothly but when again tried to go twrp recovery for rooting, I can't seem to find twrp. I got no command with Android pic and after few seconds default device recovery option. From where I can navigate to fastboot, recovery, wipe and etc.
"
Next,
Reboot options to recovery .again, tw
Parvej789 said:
Next,
Reboot options to recovery .again, twrp recovery and flash magisk.zip
Right?
Click to expand...
Click to collapse
Not sure what you mean by this. But tried
[Command]
adb reboot bootloader
fastboot reboot recovery
[Command]
Which took me to deafult recovery, no Twrp this time.
However I spent some time on xda and found this Command "fastboot boot twrp.img". Will try tomorrow again, will let you know if it worked! Man I'm probably bothering you!
Tanzin01 said:
"
Next,
Reboot options to recovery .again, tw
Not sure what you mean by this. But tried
[Command]
adb reboot bootloader
fastboot reboot recovery
[Command]
Which took me to deafult recovery, no Twrp this time.
However I spent some time on xda and found this Command "fastboot boot twrp.img". Will try tomorrow again, will let you know if it worked! Man I'm probably bothering you!
Click to expand...
Click to collapse
[command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option->Format Data -> yes Format and back home menu
Next, Reboot option -> recovery click Wait reboot recovery and flash magisk.zip
Unorganized posts! Its xda's fault. Your edited post wasn't shown to me until my last post was posted!
Thanks man. This time I got it. I wrongly rebooted after "format data". I will reflash the twrp file again tomorrow.
Hey, i got myself in trouble again! Everything was working fine till i clicked on "Erase data" from settings. Now i cant boot into sytem, always booting into twrp.Any help?
Should i try flashing android 11, the one you provided here?
Tanzin01 said:
Hey, i got myself in trouble again! Everything was working fine till i clicked on "Erase data" from settings. Now i cant boot into sytem, always booting into twrp.Any help?
Should i try flashing android 11, the one you provided here?
Click to expand...
Click to collapse
Stock recovery.img flash and reboot
To make sure, i am donig as you described,
download stock firmware and get recovery.img.
now flash it: fastboot flash recovery recovery.img
Now reboot, right?
Btw cant i just flash andoid 11 altogether? (and thanks for your constant help
Tanzin01 said:
To make sure, i am donig as you described,
download stock firmware and get recovery.img.
now flash it: fastboot flash recovery recovery.img
Now reboot, right?
Btw cant i just flash andoid 11 altogether? (and thanks for your constant help :fashfashfashfash)
Click to expand...
Click to collapse
Yes
Or
Full flash
KD7-H6211FQRSTU-Q-GL-210520V392.zip
drive.google.com
how to do full flash?
[command]
fastboot flash system FullFlashfirmware.zip
[command]
or
sideload the zip file and then swipe install via twrp?
No .
PC to mobile(fastboot flash)
Now connect device to PC
Unzip flash file PC
Folder open
Click flash.bat
CMD open:
1.Do you want to Reboot device into fastboot [Y/N]=y type enter
2.wipe user data [Y/N]=y type enter
Then flash started
FLASHING success
Reboot to phone on
sadly im not on windows. Anyway thnx. i will try and see flashing recovery. Will let you know the result.
Stock recovery.img flash and reboot options->system click.
Reboot to phone on
Parvej789 said:
Stock recovery.img flash and reboot options->system click.
Reboot to phone on
Click to expand...
Click to collapse
got error
```
fastboot flash recovery recovery.img
Sending 'recovery' (39936 KB)
FAILED (Write to device failed (No such device))
fastboot: error: Command failed
``
tried changing cable but no change.
Oky so i had a hunch, and it was correct. i mounted system and didnt get that error.
Thanks buddy. Took me few tries and combination. but now im back with my device. And as guessed, twrp was/is the culprit. It was locking the system or something like this, perhaps a glich? anyway had to mount system and already wrote the command on terminal, so as soon as phone screen turns on, i get to send the data from pc to phone before phone starts doing many of its stuff.
Wipe option->format data -yes
Reboot option-> recovery and Twrp open
1.boot.img flash
2.super.img flash
3.recovery.img flash
Than reboot
Tanzin01 said:
Thanks buddy. Took me few tries and combination. but now im back with my device. And as guessed, twrp was/is the culprit. It was locking the system or something like this, perhaps a glich? anyway had to mount system and already wrote the command on terminal, so as soon as phone screen turns on, i get to send the data from pc to phone before phone starts doing many of its stuff.
Click to expand...
Click to collapse
Build version correct
Your build version