Database Info

bricked the phone

my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help

shubham412302 said:
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
Click to expand...
Click to collapse
maybe you can flash the b500 again?

shubham412302 said:
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
Click to expand...
Click to collapse
Hi,
The same boot loop error also I encountered , and here is how i solved it.
1. First U need to download this tool -> HONOR_6_and_6Plus_Multi-Tool
2. run the Honor6MultiTool.bat
3. it will ask to install universal ADB driver. follow the instruction and install
4. then 6th option will be UNBRICK, Enter ur choice: 6
5. Then u follow the instruction
After that the phone will boot.
If any problem will occur do comment below.
All The Best!!

biswajit_kar said:
Hi,
The same boot loop error also I encountered , and here is how i solved it.
1. First U need to download this tool -> HONOR_6_and_6Plus_Multi-Tool
2. run the Honor6MultiTool.bat
3. it will ask to install universal ADB driver. follow the instruction and install
4. then 6th option will be UNBRICK, Enter ur choice: 6
5. Then u follow the instruction
After that the phone will boot.
If any problem will occur do comment below.
All The Best!!
Click to expand...
Click to collapse
the device does not enters fastboot mode just show the bootlogo
it enters fastboot but still the device wont boot
can you tell me the commands to flash all files from the update.app from fastboot
maybe that will solve the issue

DOWNLOAD stock firmware (update.app) extract from it Recovery.img system.img boot.img cache.img cust.img.and userdata.img. then turn your mobile in fastboot and connect to usb, open CMD in PC and write CD "path to adb.exe", when you are there, copy extracted files there too and write in CMD this lines:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
when you will finish write FASTBOOT REBOOT and that's all
Sent from my H60-L04 using XDA Free mobile app

Following. Reply if what Biswajit told you worked in reverting from Lollipop. Have you done this yourself Biswajit?

biswajit_kar said:
DOWNLOAD stock firmware (update.app) extract from it Recovery.img system.img boot.img cache.img cust.img.and userdata.img. then turn your mobile in fastboot and connect to usb, open CMD in PC and write CD "path to adb.exe", when you are there, copy extracted files there too and write in CMD this lines:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
when you will finish write FASTBOOT REBOOT and that's all
Sent from my H60-L04 using XDA Free mobile app
Click to expand...
Click to collapse
i tried this already but it did not work
i think flashing all the 22 files from the update.app file will work
or i have to wait till the lollipop update file comes out
my bootloader is unlocked so will my device be repaired under warranty(huawei didn't mentioned voiding warranty by unlocking bootloader while getting the code)

shubham412302 said:
i tried this already but it did not work
i think flashing all the 22 files from the update.app file will work
or i have to wait till the lollipop update file comes out
my bootloader is unlocked so will my device be repaired under warranty(huawei didn't mentioned voiding warranty by unlocking bootloader while getting the code)
Click to expand...
Click to collapse
Yes.
Though You can relock that by using the tool HONOR_6_and_6Plus_multi_tool from here .
try it. wish u luck.

http://forum.xda-developers.com/showthread.php?t=3142268

shubh_007 said:
http://forum.xda-developers.com/showthread.php?t=3142268
Click to expand...
Click to collapse
That would have worked but i already gave my phone to the service centre

shubham412302 said:
the device does not enters fastboot mode just show the bootlogo
it enters fastboot but still the device wont boot
can you tell me the commands to flash all files from the update.app from fastboot
maybe that will solve the issue
Click to expand...
Click to collapse
try this method
http://forum.xda-developers.com/honor-6/general/revert-h60-l04-emui-3-1-to-emui-3-0-t3142268

BRICK on HONOR 6(H60-L04), can't flashing ROMs

Following this thread http://forum.xda-developers.com/android/general/guide-workaround-running-xposed-t3338765 I accidentally deleted from /sys app, framework and priv-app folders, the device stopped immediatly and I only could boot in recovery(TWRP). I go on following the thread but at the end I was stuck in bootloop. Following the suggestion of mfbcool and other users i tried to unbrick the device but nothing worked: when I tried to reboot from TWRP it said "No OS Installed". If i try to flash from TWRP it fail, doing the update, after flashing the stock recovery, with the three buttons combination it stops at 5%.
As mentioned above the device is a Honor 6 H60-L04 which mounted android M(the official beta version).

Ok now we try somthing difftrent
Did you ever did a backup via TWRP ? you can restore now?
Else...
Download ADB/FASTBOOT (attachment)
In this zip is also Huawei Update Extractor
Download B550 Firmware (e.g. https://mega.nz/#!DB4R3YjT!Fp3JDf1WwmiyNX7mYD_Rftu0BDtXnorNaggOqpRouZU )
Extract via Huawei Update Extractor recovery.img, boot.img and put them in ADB folder
Reboot your device in recovery
Wipe all (dalvik /art cache, cache, cust, system, data, boot, internal memory)
Connect your device with your computer
Open ADB and type "adb devices"
Is your device listed? If not, download the right driver
If yes, type "adb reboot bootloader"
"fastboot flash boot boot.img"
"fastboot flash recovery recovery.img"
Now reboot your device into recovery.
If you see the orginal recovery put the update.app on your sd card in dload folder an reboot your phone with the three button methode.
Now the update should start. It will take about 5-10 min.

RangerP7 said:
Ok now we try somthing difftrent
Did you ever did a backup via TWRP ? you can restore now?
Else...
Download ADB/FASTBOOT (attachment)
In this zip is also Huawei Update Extractor
Download B550 Firmware (e.g. https://mega.nz/#!DB4R3YjT!Fp3JDf1WwmiyNX7mYD_Rftu0BDtXnorNaggOqpRouZU )
Extract via Huawei Update Extractor recovery.img, boot.img and put them in ADB folder
Reboot your device in recovery
Wipe all (dalvik /art cache, cache, cust, system, data, boot, internal memory)
Connect your device with your computer
Open ADB and type "adb devices"
Is your device listed? If not, download the right driver
If yes, type "adb reboot bootloader"
"fastboot flash boot boot.img"
"fastboot flash recovery recovery.img"
Now reboot your device into recovery.
If you see the orginal recovery put the update.app on your sd card in dload folder an reboot your phone with the three button methode.
Now the update should start. It will take about 5-10 min.
Click to expand...
Click to collapse
i've never made a backup, i know it would solve this problem...
i did everything you wrote, but when i was trying to reboot in recovery the device showed me the screen "HONOR(with the red <h>) powered by android"

sl97 said:
i've never made a backup, i know it would solve this problem...
i did everything you wrote, but when i was trying to reboot in recovery the device showed me the screen "HONOR(with the red <h>) powered by android"
Click to expand...
Click to collapse
i've already tried to flash other version of recovery, but the only two version that work are TWRP for EMUI 4.0 and the Stock of B803

Download the ROM you were on before all this happened. It's compulsory you're downloading the ROM you were on to avoid any compatibility errors.
Make sure you have installed Huawei HiSuite.
Extract boot.img , system.img , cust.img and recovery.img from the ROM you downloaded using Huawei Update Extractor.
Move all the extracted .img to the Fastboot/ADB folder (folder where fastboot.exe or adb.exe is installed)
While your device is powered off, hold volume down button and plug your device to computer. Your device will boot to Fastboot Mode.
Enter the following commands one by one:
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot flash recovery.img
After all commands have been executed, unplug your device from computer and hold Volume Up button. Your device will boot to Huawei's eRecovery (2nd Recovery).
Shutdown your device via the eRecovery.
Now hold Volume Up and Power button. As soon as you see Honor logo, leave the power button but continue to hold Volume Up button. Your device will now boot to recovery.
Perform a Factory Reset via the recovery.
Now reboot your device.
Done!!!

mfbcool said:
Download the ROM you were on before all this happened. It's compulsory you're downloading the ROM you were on to avoid any compatibility errors.
Make sure you have installed Huawei HiSuite.
Extract boot.img , system.img , cust.img and recovery.img from the ROM you downloaded using Huawei Update Extractor.
Move all the extracted .img to the Fastboot/ADB folder (folder where fastboot.exe or adb.exe is installed)
While your device is powered off, hold volume down button and plug your device to computer. Your device will boot to Fastboot Mode.
Enter the following commands one by one:
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot flash recovery.img
After all commands have been executed, unplug your device from computer and hold Volume Up button. Your device will boot to Huawei's eRecovery (2nd Recovery).
Shutdown your device via the eRecovery.
Now hold Volume Up and Power button. As soon as you see Honor logo, leave the power button but continue to hold Volume Up button. Your device will now boot to recovery.
Perform a Factory Reset via the recovery.
Now reboot your device.
Done!!!
Click to expand...
Click to collapse
the problem is that i had android m beta update(B803) and i don't know where to find the full ROM. i have the update but cust and system are not ".img" but they are folders. i don't know how to flash them...
this is the link of the files i use https://drive.google.com/folderview?id=0B9EKeqAx6XkfRGdTVjlJQ1VyLUk#

sl97 said:
the problem is that i had android m beta update(B803) and i don't know where to find the full ROM. i have the update but cust and system are not ".img" but they are folders. i don't know how to flash them...
this is the link of the files i use https://drive.google.com/folderview?id=0B9EKeqAx6XkfRGdTVjlJQ1VyLUk#
Click to expand...
Click to collapse
Alright. That's the problem. You don't have the full ROM yet and the file you gave is an OTA zip. It's never gonna work.
But try my method again but this time with a Lollipop ROM EMUI 3.1 which you were having before Marshmallow.

mfbcool said:
Alright. That's the problem. You don't have the full ROM yet and the file you gave is an OTA zip. It's never gonna work.
But try my method again but this time with a Lollipop ROM EMUI 3.1 which you were having before Marshmallow.
Click to expand...
Click to collapse
i'm trying your method but i cannot boot into eRecovery. i unplug the device and keep pressed the vol + but nothing happened, it stay in fastboot mode

sl97 said:
i'm trying your method but i cannot boot into eRecovery. i unplug the device and keep pressed the vol + but nothing happened, it stay in fastboot mode
Click to expand...
Click to collapse
Then, just restart your device, boot to stock recovery, factory reset and again reboot.

mfbcool said:
Then, just restart your device, boot to stock recovery, factory reset and again reboot.
Click to expand...
Click to collapse
i cannot boot in recovery. the device vibrates but then shows me the logo screen.
the only recovery which works is for emui 4.0...
it seems that i need or a backup of someone of the same firmware in TWRP or the full ROM of the B803 update...

sl97 said:
i cannot boot in recovery. the device vibrates but then shows me the logo screen.
the only recovery which works is for emui 4.0...
it seems that i need or a backup of someone of the same firmware in TWRP or the full ROM of the B803 update...
Click to expand...
Click to collapse
Then use EMUI 4.0 recovery to factory reset the phone but use Android 5.1.1 ROM for system.img, cust.img and boot.img.

mfbcool said:
Then use EMUI 4.0 recovery to factory reset the phone but use Android 5.1.1 ROM for system.img, cust.img and boot.img.
Click to expand...
Click to collapse
while wiping fro factory reset it comes to 17% than stops showing a red exclamation mark in the middle of the circle

sl97 said:
while wiping fro factory reset it comes to 17% than stops showing a red exclamation mark in the middle of the circle
Click to expand...
Click to collapse
Try this using fastboot
Code:
fastboot erase cache
fastboot erase userdata

mfbcool said:
Try this using fastboot
Code:
fastboot erase cache
fastboot erase userdata
Click to expand...
Click to collapse
I was trying to restore a backup i found in another thread for TWRP and B804 and incredibly it work!! http://forum.xda-developers.com/honor-6/general/help-honor-6-bricked-b805-t3315247 here there are also other backups, in your opinion i should restore that B803 or is better to leave so?!

sl97 said:
I was trying to restore a backup i found in another thread for TWRP and B804 and incredibly it work!! http://forum.xda-developers.com/honor-6/general/help-honor-6-bricked-b805-t3315247 here there are also other backups, in your opinion i should restore that B803 or is better to leave so?!
Click to expand...
Click to collapse
Fine!
I would go back to LP and clear install MM. So you could be sure you have a new and clear ROM installed.

Ok! Thank you very much!
Sent from my H60-L04 using XDA-Developers mobile app

i couldnot flash stock recovery because of the fail command not alowed,

thalaraj1992 said:
i couldnot flash stock recovery because of the fail command not alowed,
Click to expand...
Click to collapse
Is your bootloader unlocked?

my bootboader show "phone unlocked"

What are you typing?
"fastboot flash recovery recovery.img"
Is your recovery.img in the ADB / FASTBOOT folder?

Kangvip B211 to Stockrom B209

Is it possible to go back to stock rom from kangvip B211. I unrooted through supersu and on stock recovery. Tried forced reboot / recovery with stock B029 and B209. Both getting stuck at 90%. Somehow I lost the stockroom backup. Can someone help me or ideas ?

So first you need the following.
1. Clean B029 firmware.
2. Huawei Firwmare Extractor
3. ADB and fastboot
4. P8max TWRP
After you have all those.
1. Locate your Update.app from your B029 Firmware.
2. Use Huawei Firmware Extractor and extract the follow from your Update.App
boot.img , recovery.img, cust.img , system.img , cache.img , userdata.img
3. after rename all the files you have extracted from Huawei Firmware Extractor ( they should be called. "10.boot.img , 11.recovery.img .... etc") to the following:
"boot.img, reocvery.img , cust.img, system.img, cache.img, userdata.img"
4. So now you need to put those files in the exact place as your ADB and fastboot. So your FOLDER should look like the following:
ADB.exe
Fastboot.exe
"some ADB & FASTBOOT files"
boot.img
recovery.img
cust.img
system.img
cache.img
userdata.img
Also, put the updates.app file into your SD card under the folder "dload". So it should look like "X:\dload\updates.app"
After you have the following setup, do the following on your phone.
Make sure your phone is shutdown.
1a. plug in USB then (vol down + power) to boot into bootloader
** If your phone can not shutdown because you are in a bootloop**
1b. Make sure you have (hiSuite) installed, plug in your USB to your computer. Hold all bottoms till the phone turns off a vibrate. Then hold (vol down + Power) to get into bootloader
2. Use command prompt to go into your setup you have done at the top with ADB, fastboot and img files.
" cd c:\your\folder\here\p8max " for example
type "fastboot devices"
you should see your devices show up. If it doesn't then you have driver problems you have fix first or you don't have hiSuite installed. (Try re-installing hiSuite)
If you see your device show up, type the following
MAKE SURE EACH "fastboot flash" SAYS OK BEFORE DOING THE NEXT STEP.
type "fastboot flash boot boot.img"
type "fastboot flash recovery recovery.img"
type "fastboot flash cust cust.img"
type "fastboot flash system system.img"
type "fastboot flash cache cache.img"
type "fastboot flash userdata userdata.img"
If all are ok, you want to:
type "fastboot reboot"
This should restart your phone. You should be able to boot up your phone. Once you have your phone boot, your not DONE YET!
Turn off your phone, make sure the B029 update is in your SD card. (see example above)
turn back on your phone and hold (vol up + power) with NO USB plugged in. This should force your phone to force update back to B029.
Make sure you get to 100%. NOW YOUR PHONE IS FIXED! - it will reboot, then now you should be in b029
If you get stuck at 90% then you need to clean up your internal storage first.

Hirs_E_Fruit said:
So first you need the following.
1. Clean B029 firmware.
2. Huawei Firwmare Extractor
3. ADB and fastboot
4. P8max TWRP
After you have all those.
1. Locate your Update.app from your B029 Firmware.
2. Use Huawei Firmware Extractor and extract the follow from your Update.App
boot.img , recovery.img, cust.img , system.img , cache.img , userdata.img
3. after rename all the files you have extracted from Huawei Firmware Extractor ( they should be called. "10.boot.img , 11.recovery.img .... etc") to the following:
"boot.img, reocvery.img , cust.img, system.img, cache.img, userdata.img"
4. So now you need to put those files in the exact place as your ADB and fastboot. So your FOLDER should look like the following:
ADB.exe
Fastboot.exe
"some ADB & FASTBOOT files"
boot.img
recovery.img
cust.img
system.img
cache.img
userdata.img
Also, put the updates.app file into your SD card under the folder "dload". So it should look like "X:\dload\updates.app"
After you have the following setup, do the following on your phone.
Make sure your phone is shutdown.
1a. plug in USB then (vol down + power) to boot into bootloader
** If your phone can not shutdown because you are in a bootloop**
1b. Make sure you have (hiSuite) installed, plug in your USB to your computer. Hold all bottoms till the phone turns off a vibrate. Then hold (vol down + Power) to get into bootloader
2. Use command prompt to go into your setup you have done at the top with ADB, fastboot and img files.
" cd c:\your\folder\here\p8max " for example
type "fastboot devices"
you should see your devices show up. If it doesn't then you have driver problems you have fix first or you don't have hiSuite installed. (Try re-installing hiSuite)
If you see your device show up, type the following
MAKE SURE EACH "fastboot flash" SAYS OK BEFORE DOING THE NEXT STEP.
type "fastboot flash boot boot.img"
type "fastboot flash recovery recovery.img"
type "fastboot flash cust cust.img"
type "fastboot flash system system.img"
type "fastboot flash cache cache.img"
type "fastboot flash userdata userdata.img"
If all are ok, you want to:
type "fastboot reboot"
This should restart your phone. You should be able to boot up your phone. Once you have your phone boot, your not DONE YET!
Turn off your phone, make sure the B029 update is in your SD card. (see example above)
turn back on your phone and hold (vol up + power) with NO USB plugged in. This should force your phone to force update back to B029.
Make sure you get to 100%. NOW YOUR PHONE IS FIXED! - it will reboot, then now you should be in b029
If you get stuck at 90% then you need to clean up your internal storage first.
Click to expand...
Click to collapse
@Hirs_E_Fruit
thanks so much for the detailed description, I will try and let you know the progress. Hopefully I can restore the phone.

fg3441 said:
@Hirs_E_Fruit
thanks so much for the detailed description, I will try and let you know the progress. Hopefully I can restore the phone.
Click to expand...
Click to collapse
Thanks , it worked flawlessly. Awesome.

Now I can't put twrp or root the p8max after B211 update. Phone is getting stuck at flying Huawei logo. Has anyone able to root the device after the update?
Sent from my HUAWEI P8max using XDA-Developers mobile app

fg3441 said:
Now I can't put twrp or root the p8max after B211 update. Phone is getting stuck at flying Huawei logo. Has anyone able to root the device after the update?
Sent from my HUAWEI P8max using XDA-Developers mobile app
Click to expand...
Click to collapse
Android 6 Root is different then Android 5 Root.

Thanks I got it working today following your root procedure. I believe the problem was flashing multiple files at the same time. Today I did local update file flashed first then rebooted and then supers. Everything is working well. Thanks for your detailed description .
Sent from my HUAWEI P8max using XDA-Developers mobile app

Thanks But
i really appreciate your efforts but some where i m doing something wrong. my phone is not rooted. must it be rooted? is it possible for you to make a video for the whole procedure please? it will more helpful for me and others like me . thanks.

fg3441 said:
@Hirs_E_Fruit
thanks so much for the detailed description, I will try and let you know the progress. Hopefully I can restore the phone.
Click to expand...
Click to collapse
make sure the B029 update is in your SD card - ZIP or APP. THANK YOU

link to b029 stock rom ?
Thanks!

I need B029 stock firmware.Cant find it anywhere?
Thanks
!

http://www.needrom.com/download/p8max-dav-703l/

How to reinstall stock rom!?

Hello
I unlocked my bootloader, then installed CWM, rooted then installed unofficial EMUI 4 ROM.
But I was EMUI 3.1 before...
So my Honor 6 didn't work after that and never couldn't boot the ROM
When I try to install CWM again by Multi-Tool, flashing error says that I need to check the confirmation dialog on my device but I cant't access to my device because there is no ROM :|
I installed EMUI 4 stock recovery and now what can I do for reinstall the rom -_-
Is there any way at all?

Have you tried downloading EMUI 3.0 stock ROM and using the three button method after placing it on your SD card? which is power + vol up + vol down?

In order to get back to full stock ROM follow these steps, since you already flashed recovery of a build number I don't know, do it again by following the procedure:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Enjoy your out of the box device..!!

DigiGoon said:
In order to get back to full stock ROM follow these steps, since you already flashed recovery of a build number I don't know, do it again by following the procedure:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Enjoy your out of the box device..!!
Click to expand...
Click to collapse
Hi Digicoon,
I tried your method to restore to stock ROM after successfully installing KangVip Rom.
Actually this custom rom was intended for Mate7, but beeing a simple port from Honor6Plus (as stated by the developer) I installed on my device without any problem. The only thing I noticed was that my device was no more a Honor6Plus PE-TL10, but a DUK-AL20 which I think is Mate7 model number, right?
The ROM works good but I wanted to revert it back to stock.
Anyway, I tried downloading the kitkat stock rom for my Honor6Plus (it should be PE-TL10_EMUI3.0_Android4.4_V100R001CHNC00B260.zip) , extracted the UPDATE.APP and the four files you stated above, flashed them via fastboot and then put the entire dload folder inside the root of my SD card.
The phone hangs on the boot screen and then boot loop... no way to restore it.
I reverted it back to custom rom (via nandroid backup), even tried to flash the stock recovery.img to use the "Three buttons method" but with no luck, every time it stucks on boot logo and bootloop.
Do you have any idea what could it be? Maybe a "partitions" problem, due to different model number?
Thanks in advance and Merry Christmas

Also work for rooted L04 (TWRP) back to lollipop?
DigiGoon said:
In order to get back to full stock ROM follow these steps, since you already flashed recovery of a build number I don't know, do it again by following the procedure:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Enjoy your out of the box device..!!
Click to expand...
Click to collapse
Does this also work in my case?
I have a rooted L-04 with TWRP and the latest b831-software. Now that I realised GPS is not working anymore I want to go back to Lollipop.
Has anyone tried it?
Thanks for your help.

Zox37 said:
Hello
I unlocked my bootloader, then installed CWM, rooted then installed unofficial EMUI 4 ROM.
But I was EMUI 3.1 before...
So my Honor 6 didn't work after that and never couldn't boot the ROM
When I try to install CWM again by Multi-Tool, flashing error says that I need to check the confirmation dialog on my device but I cant't access to my device because there is no ROM :|
I installed EMUI 4 stock recovery and now what can I do for reinstall the rom -_-
Is there any way at all?
Click to expand...
Click to collapse
how i can root my device honor 6
my model H60-L04C900B521
i unlocked my boot loader via official site
but i cant root my device
i dont have a rom on device
my device stuck on bootloop

please help ?

hello brothers I need help, I do not know how to solve this, Installing a rom aosp, everything was fine, only when I started installing another Rom aosp, I could not change the default recovery stock installed through TWRP , That's when all these problems started. My version of my cell phone is L09 C432 single SIM .. E used HUAWEI extract and remains the same through FASTBOOT

up help please ....

Please grab your full firmware from XDA. Just search for your original stock build number. Extract the Update.app file from the update.zip (should be about 3-4 gb). Then, create "dload" folder in your microsd card. Move update.app file to that folder. Then, shut off phone. Turn on phone by holding all buttons (vol up, vol down and power). Once the screen is on, release power but continue to hold both vol buttons. It will force eRecovery to update software via that update.app file. Once it's done, do a factory reset via eRecovery. It should boot to stock rom after that.

drift08 said:
Please grab your full firmware from XDA. Just search for your original stock build number. Extract the Update.app file from the update.zip (should be about 3-4 gb). Then, create "dload" folder in your microsd card. Move update.app file to that folder. Then, shut off phone. Turn on phone by holding all buttons (vol up, vol down and power). Once the screen is on, release power but continue to hold both vol buttons. It will force eRecovery to update software via that update.app file. Once it's done, do a factory reset via eRecovery. It should boot to stock rom after that.
Click to expand...
Click to collapse
I already tried that method, and it does not work simply the phone gets stuck in the beginning .. I already tried the fastboot method and tap It did not work either ... I need help from a developer ...
Perhaps Oreo no longer allows to do that function ... ???

it works fine. I just did it on my Mate 9 w/o any issues. What do you mean by phone getting stuck at the beginning? Did the TWRP flash went through or not?

drift08 said:
it works fine. I just did it on my Mate 9 w/o any issues. What do you mean by phone getting stuck at the beginning? Did the TWRP flash went through or not?
Click to expand...
Click to collapse
I'm stuck here .. I watched ..

hi,this happened to me before.
i cant remember how i did fix it but try these things...
First extract recovery image(Recovery.img or boot.img) from ur UPDATE.APP Or Extract the recovery_Ramdisk.img and RAMDISK.IMG from ur UPDATE.APP.(for Oreo,its Ramdisk and for nougat,its recovery.)
#for the first case(nougat),after u extracted that recovery.img Or boot.img file,u should flash them through fastboot with this command :fastboot flash recovery recovery.img then reboot and see if works if it didnt work,then try boot.img and use this: fastboot flash recovery Boot.img
##for the second case(oreo),after u extracted that recovery_Ramdisk.img file,u should flash it through fastboot with this command :fastboot flash recovery_ramdisk recovery_Ramdisk.img Then
u should flash RAMDISK.IMG through fastboot with this command :fastboot flash ramdisk RAMDISK.IMG
Due to image,im assuming u r running Nougat and missing recovery partition so try the first method and hope for the best.
EDIT: This is my post : https://forum.xda-developers.com/mate-9/help/help-unbrick-oreo-t3704000

ezraiil1 said:
hi,this happened to me before.
i cant remember how i did fix it but try these things...
First extract recovery image(Recovery.img or boot.img) from ur UPDATE.APP Or Extract the recovery_Ramdisk.img and RAMDISK.IMG from ur UPDATE.APP.(for Oreo,its Ramdisk and for nougat,its recovery.)
#for the first case(nougat),after u extracted that recovery.img Or boot.img file,u should flash them through fastboot with this command :fastboot flash recovery recovery.img then reboot and see if works if it didnt work,then try boot.img and use this: fastboot flash recovery Boot.img
##for the second case(oreo),after u extracted that recovery_Ramdisk.img file,u should flash it through fastboot with this command :fastboot flash recovery_ramdisk recovery_Ramdisk.img Then
u should flash RAMDISK.IMG through fastboot with this command :fastboot flash ramdisk RAMDISK.IMG
Due to image,im assuming u r running Nougat and missing recovery partition so try the first method and hope for the best.
EDIT: This is my post : https://forum.xda-developers.com/mate-9/help/help-unbrick-oreo-t3704000
Click to expand...
Click to collapse
Thanks I will try .. !! I will be very grateful if this works for me ... I hope to find the exits, I am very sad ...
@Ezaraiil .. I see that your case shows you the number 10 and the number 2., In my case it is the number 11 and 2 .. we hope everything goes well