Database Info

[EMUI 3.0][PORT] How to install EMUI 3.0 on H60-L04 International variant.

Hi everyone.
Today is the day I got my hands on a Honor 6 H60-L04. Today is also the day I tried to port EMUI 3.0 on it, and the day I succeeded. I had to find a workaround and a small trick using stock updater to do so, but it's 100% working as far as I know.
REQUIREMENTS:
-Unlocked bootloader. Because we'll use fastboot a lot here.
-A Honor 6 L04.
-fastboot command installed on your computer. Not going to explain it here, it's pretty easy to find by yourself.
THE METHOD:
It's pretty easy to understand. I discovered by trying that EMUI 2.3 factory images from L01 worked perfectly on L04, so I thought, why not use this as a base?
-Download EMUI 2.3 images for L01 here: https://mega.co.nz/#!Mk0VhI6K!V2su7wLGl8shiwxROOQnJ-t67S1DPL2vlTWuW3EeBsw
-Put your L04 in fastboot mode (turn it off, then hold volume down key and connect to computer)
-Use the following fastboot commands:
Code:
fastboot flash boot (path to BOOT.img)
fastboot flash cache (path to CACHE.img)
fastboot flash cust (path to CUST.img)
fastboot flash recovery (path to RECOVERY.img)
fastboot flash userdata (path to USERDATA.img)
fastboot flash system (path to SYSTEM.img)
fastboot reboot
Please also remember to disconnect and reconnect your phone to computer between each command. It refused to flash the next command everytime if I didn't disconnect it before.
-Configure your phone so that it's usable. This may not be required, but I did it for safety purposes.
So, now we're going to enter the interesting part: EMUI 3.0 installation.
-Download EMUI 3.0 official update for L01 from Huawei here: http://www.emui.com/nsp/geturl.php?path=H60-L01_EMUI3.0_Android4.4_V100R001CHNC00B307.zip&rid=786
-Unzip the downloaded file. You'll get a folder called "dload".
-Plug your phone to computer (MTP mode is preferred) and transfer the dload folder to the root of your INTERNAL memory (not the external SD card).
-Go to Settings > Update, and choose "Local update"
-Agree to update your phone. It'll reboot.
-After a while, your phone will say that update failed. Sad, isn't it?
-Hit power key to shut it off, then reboot it.
And then you'll see that you are on EMUI 3.0. But it's not over yet. It should be okay by now, but as phone said, update failed. To get on the safe side, we'll make a proper fastboot installation.
-Download EMUI 3.0 images for L01 here: https://mega.co.nz/#!V003WQSA!JmEoL2bMQwVeDRlJJueWBX3haXYzo5aK8XeCUq7XLww
-Put your L04 in fastboot mode (turn it off, then hold volume down key and connect to computer)
-Use the following fastboot commands:
Code:
fastboot flash cache (path to CACHE.img)
fastboot flash cust (path to CUST.img)
fastboot flash recovery (path to RECOVERY.img)
fastboot flash userdata (path to USERDATA.img)
fastboot flash system (path to SYSTEM.img)
fastboot reboot
Please also remember to disconnect and reconnect your phone to computer between each command. It refused to flash the next command everytime if I didn't disconnect it before.
Your phone will now be rebooted on EMUI 3.0 fully functionnal. It'll show "H60-L01" in Settings > About, this is 100% normal. It doesn't prevent your device from being 100% functional.
If you experience problems with the icons being ugly, just go to the Themes app and apply stock theme (in the 4th tab of the app). It'll be fixed. You can now flash a custom recovery and install gapps and SuperSU.
EDIT: if you have an Android logo as bootanimation, it means your bootanimation.zip is missing. To fix this, just download ES Explorer from Play Store. Then, copy /cust/channel/cn/media/bootanimation.zip to /system/media/bootanimation.zip and reboot. It'll fix this issue.
EDIT 2: if your internal memory seems to have shrinked, you will have to reformat it in CWM recovery. Go to "Mounts and storage", then "Format /data and /data/share (/sdcard)". It'll be fixed.

Great find! Can you confirm the fdd lte bands 800 and 1800 mhz are working? Because the h60-l01 uses a different modem, baseband
---------- Post added at 09:44 AM ---------- Previous post was at 08:52 AM ----------
The EMUI 3.0 rar from mega doesn't work for me, I just get an error

I can't confirm this, because where I live, I have no LTE. As I said on the L04 thread, I don't know if my method reflashes the baseband, but you can still download L04 stock rom and extract the baseband images with Huawei Update Extractor 0.9.8.0, and reflash them after you are on EMUI 3.0.
Also, what error do you have? Is it when downloading it or extracting it?

My error is "Temporary error, retrying" I will look in to extracting the baseband, my baseband version 21.204.00.01.031 K3V300R001C10B150_M1_p963

robert_jacketti said:
My error is "Temporary error, retrying" I will look in to extracting the baseband, my baseband version 21.204.00.01.031 K3V300R001C10B150_M1_p963
Click to expand...
Click to collapse
I see. You should maybe retry later.
Baseband version on mine with EMUI 3.0 is 21.211.00.03.031. Though, someone else on the L04 thread reported LTE is working.

Great! Just in case when I finished extracting I found this post
http://forum.xda-developers.com/showpost.php?p=56308053&postcount=2414
biobio76 extracted the L04 modem and post it there
Demazda said:
I see. You should maybe retry later.
Baseband version on mine with EMUI 3.0 is 21.211.00.03.031. Though, someone else on the L04 thread reported LTE is working.
Click to expand...
Click to collapse

Can you someone please mirror the emui official update..
Or else please extract boot.IMG from official update
It would be great
Sent from my Nexus 5 using Tapatalk

Is there a way to revert it back to stock? How do I manage it?
EDIT:
Got it working now. I used the MultiTool by VirusPlus and used the "Unbrick" Option. Just download the Stock ROM and extract the UPDATE.APP with HuaweiUpdateExtractor. After that, copy the files needed by MultiTool in the "Unbrick" Folder and then copy the Stock ROM folder "dload" into the root of your SD Card.
After that, get into fastboot (shut down your phone and hold down the Vol- button and connect an USB cable), and transfer the 4 files. Reset it afterwards while pressing all 3 buttons(power, Vol+, Vol-) and wait for it to install. It takes a while.
EDIT 2:
After trying 10 times, it didn't work. something messed up the phone and I can't overwrite the image. Now I'm stuck between L04 and L01 with SYSTEM of L04 and MODEM of L01. I can't get back on stock anymore, because I can't update my phone to the newest version.
EDIT 3:
Can somebody provide a "Stock" CWM-Backup for fullflashing the L04-Model?

Is it possible to replace the modem images in the update.app with L04 versions and reflash the update???

Sir, if I flash the firmware of China version will I be able to use Google aps

revert to stock
Starting situation:
I have a H60-L04 flashed with H60-L01 emui 3.0 rooted.
Download hihonor update for h60-l04 (emui 2.3) H60-L04V100R001C00B109SP01 from HIHONOR
http://7961b64fc16ad15a92ef-9f98f1ed...r6_upgrade.zip
Use huawei update extractor to extract the update.app
Create a backup using cwm (save it on your computer) along with anything else you want to save.
Use fastboot to flash the Boot, Cache, Cust, Recovery, System and Userdata.
Code:
fastboot flash boot (path to BOOT.img)
fastboot flash cache (path to CACHE.img)
fastboot flash cust (path to CUST.img)
fastboot flash recovery (path to RECOVERY.img)
fastboot flash userdata (path to USERDATA.img)
fastboot flash system (path to SYSTEM.img)
fastboot reboot
Use fastboot to reboot
I did this and now I'm on H60-L04 emui 2.3 V100R001C00B109SP01
note: My storage has shrunk, so I went into the emui recovery and wipe data and cache and now it's fixed

robert_jacketti said:
Starting situation:
I have a H60-L04 flashed with H60-L01 emui 3.0 rooted.
Download hihonor update for h60-l04 (emui 2.3) H60-L04V100R001C00B109SP01 from HIHONOR
http://7961b64fc16ad15a92ef-9f98f1ed...r6_upgrade.zip
Use huawei update extractor to extract the update.app
Create a backup using cwm (save it on your computer) along with anything else you want to save.
Use fastboot to flash the Boot, Cache, Cust, Recovery, System and Userdata.
Code:
fastboot flash boot (path to BOOT.img)
fastboot flash cache (path to CACHE.img)
fastboot flash cust (path to CUST.img)
fastboot flash recovery (path to RECOVERY.img)
fastboot flash userdata (path to USERDATA.img)
fastboot flash system (path to SYSTEM.img)
fastboot reboot
Use fastboot to reboot
I did this and now I'm on H60-L04 emui 2.3 V100R001C00B109SP01
note: My storage has shrunk, so I went into the emui recovery and wipe data and cache and now it's fixed
Click to expand...
Click to collapse
Yeah, but your modem stays on L01. To fix this, you need to flash the EMUI 3.0 FullROM for L04 after your steps.

System Dump.
Is it possible to get a SYSTEM DUMP from this ROM?
Thanks in advance

BRICK on HONOR 6(H60-L04), can't flashing ROMs

Following this thread http://forum.xda-developers.com/android/general/guide-workaround-running-xposed-t3338765 I accidentally deleted from /sys app, framework and priv-app folders, the device stopped immediatly and I only could boot in recovery(TWRP). I go on following the thread but at the end I was stuck in bootloop. Following the suggestion of mfbcool and other users i tried to unbrick the device but nothing worked: when I tried to reboot from TWRP it said "No OS Installed". If i try to flash from TWRP it fail, doing the update, after flashing the stock recovery, with the three buttons combination it stops at 5%.
As mentioned above the device is a Honor 6 H60-L04 which mounted android M(the official beta version).

Ok now we try somthing difftrent
Did you ever did a backup via TWRP ? you can restore now?
Else...
Download ADB/FASTBOOT (attachment)
In this zip is also Huawei Update Extractor
Download B550 Firmware (e.g. https://mega.nz/#!DB4R3YjT!Fp3JDf1WwmiyNX7mYD_Rftu0BDtXnorNaggOqpRouZU )
Extract via Huawei Update Extractor recovery.img, boot.img and put them in ADB folder
Reboot your device in recovery
Wipe all (dalvik /art cache, cache, cust, system, data, boot, internal memory)
Connect your device with your computer
Open ADB and type "adb devices"
Is your device listed? If not, download the right driver
If yes, type "adb reboot bootloader"
"fastboot flash boot boot.img"
"fastboot flash recovery recovery.img"
Now reboot your device into recovery.
If you see the orginal recovery put the update.app on your sd card in dload folder an reboot your phone with the three button methode.
Now the update should start. It will take about 5-10 min.

RangerP7 said:
Ok now we try somthing difftrent
Did you ever did a backup via TWRP ? you can restore now?
Else...
Download ADB/FASTBOOT (attachment)
In this zip is also Huawei Update Extractor
Download B550 Firmware (e.g. https://mega.nz/#!DB4R3YjT!Fp3JDf1WwmiyNX7mYD_Rftu0BDtXnorNaggOqpRouZU )
Extract via Huawei Update Extractor recovery.img, boot.img and put them in ADB folder
Reboot your device in recovery
Wipe all (dalvik /art cache, cache, cust, system, data, boot, internal memory)
Connect your device with your computer
Open ADB and type "adb devices"
Is your device listed? If not, download the right driver
If yes, type "adb reboot bootloader"
"fastboot flash boot boot.img"
"fastboot flash recovery recovery.img"
Now reboot your device into recovery.
If you see the orginal recovery put the update.app on your sd card in dload folder an reboot your phone with the three button methode.
Now the update should start. It will take about 5-10 min.
Click to expand...
Click to collapse
i've never made a backup, i know it would solve this problem...
i did everything you wrote, but when i was trying to reboot in recovery the device showed me the screen "HONOR(with the red <h>) powered by android"

sl97 said:
i've never made a backup, i know it would solve this problem...
i did everything you wrote, but when i was trying to reboot in recovery the device showed me the screen "HONOR(with the red <h>) powered by android"
Click to expand...
Click to collapse
i've already tried to flash other version of recovery, but the only two version that work are TWRP for EMUI 4.0 and the Stock of B803

Download the ROM you were on before all this happened. It's compulsory you're downloading the ROM you were on to avoid any compatibility errors.
Make sure you have installed Huawei HiSuite.
Extract boot.img , system.img , cust.img and recovery.img from the ROM you downloaded using Huawei Update Extractor.
Move all the extracted .img to the Fastboot/ADB folder (folder where fastboot.exe or adb.exe is installed)
While your device is powered off, hold volume down button and plug your device to computer. Your device will boot to Fastboot Mode.
Enter the following commands one by one:
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot flash recovery.img
After all commands have been executed, unplug your device from computer and hold Volume Up button. Your device will boot to Huawei's eRecovery (2nd Recovery).
Shutdown your device via the eRecovery.
Now hold Volume Up and Power button. As soon as you see Honor logo, leave the power button but continue to hold Volume Up button. Your device will now boot to recovery.
Perform a Factory Reset via the recovery.
Now reboot your device.
Done!!!

mfbcool said:
Download the ROM you were on before all this happened. It's compulsory you're downloading the ROM you were on to avoid any compatibility errors.
Make sure you have installed Huawei HiSuite.
Extract boot.img , system.img , cust.img and recovery.img from the ROM you downloaded using Huawei Update Extractor.
Move all the extracted .img to the Fastboot/ADB folder (folder where fastboot.exe or adb.exe is installed)
While your device is powered off, hold volume down button and plug your device to computer. Your device will boot to Fastboot Mode.
Enter the following commands one by one:
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot flash recovery.img
After all commands have been executed, unplug your device from computer and hold Volume Up button. Your device will boot to Huawei's eRecovery (2nd Recovery).
Shutdown your device via the eRecovery.
Now hold Volume Up and Power button. As soon as you see Honor logo, leave the power button but continue to hold Volume Up button. Your device will now boot to recovery.
Perform a Factory Reset via the recovery.
Now reboot your device.
Done!!!
Click to expand...
Click to collapse
the problem is that i had android m beta update(B803) and i don't know where to find the full ROM. i have the update but cust and system are not ".img" but they are folders. i don't know how to flash them...
this is the link of the files i use https://drive.google.com/folderview?id=0B9EKeqAx6XkfRGdTVjlJQ1VyLUk#

sl97 said:
the problem is that i had android m beta update(B803) and i don't know where to find the full ROM. i have the update but cust and system are not ".img" but they are folders. i don't know how to flash them...
this is the link of the files i use https://drive.google.com/folderview?id=0B9EKeqAx6XkfRGdTVjlJQ1VyLUk#
Click to expand...
Click to collapse
Alright. That's the problem. You don't have the full ROM yet and the file you gave is an OTA zip. It's never gonna work.
But try my method again but this time with a Lollipop ROM EMUI 3.1 which you were having before Marshmallow.

mfbcool said:
Alright. That's the problem. You don't have the full ROM yet and the file you gave is an OTA zip. It's never gonna work.
But try my method again but this time with a Lollipop ROM EMUI 3.1 which you were having before Marshmallow.
Click to expand...
Click to collapse
i'm trying your method but i cannot boot into eRecovery. i unplug the device and keep pressed the vol + but nothing happened, it stay in fastboot mode

sl97 said:
i'm trying your method but i cannot boot into eRecovery. i unplug the device and keep pressed the vol + but nothing happened, it stay in fastboot mode
Click to expand...
Click to collapse
Then, just restart your device, boot to stock recovery, factory reset and again reboot.

mfbcool said:
Then, just restart your device, boot to stock recovery, factory reset and again reboot.
Click to expand...
Click to collapse
i cannot boot in recovery. the device vibrates but then shows me the logo screen.
the only recovery which works is for emui 4.0...
it seems that i need or a backup of someone of the same firmware in TWRP or the full ROM of the B803 update...

sl97 said:
i cannot boot in recovery. the device vibrates but then shows me the logo screen.
the only recovery which works is for emui 4.0...
it seems that i need or a backup of someone of the same firmware in TWRP or the full ROM of the B803 update...
Click to expand...
Click to collapse
Then use EMUI 4.0 recovery to factory reset the phone but use Android 5.1.1 ROM for system.img, cust.img and boot.img.

mfbcool said:
Then use EMUI 4.0 recovery to factory reset the phone but use Android 5.1.1 ROM for system.img, cust.img and boot.img.
Click to expand...
Click to collapse
while wiping fro factory reset it comes to 17% than stops showing a red exclamation mark in the middle of the circle

sl97 said:
while wiping fro factory reset it comes to 17% than stops showing a red exclamation mark in the middle of the circle
Click to expand...
Click to collapse
Try this using fastboot
Code:
fastboot erase cache
fastboot erase userdata

mfbcool said:
Try this using fastboot
Code:
fastboot erase cache
fastboot erase userdata
Click to expand...
Click to collapse
I was trying to restore a backup i found in another thread for TWRP and B804 and incredibly it work!! http://forum.xda-developers.com/honor-6/general/help-honor-6-bricked-b805-t3315247 here there are also other backups, in your opinion i should restore that B803 or is better to leave so?!

sl97 said:
I was trying to restore a backup i found in another thread for TWRP and B804 and incredibly it work!! http://forum.xda-developers.com/honor-6/general/help-honor-6-bricked-b805-t3315247 here there are also other backups, in your opinion i should restore that B803 or is better to leave so?!
Click to expand...
Click to collapse
Fine!
I would go back to LP and clear install MM. So you could be sure you have a new and clear ROM installed.

Ok! Thank you very much!
Sent from my H60-L04 using XDA-Developers mobile app

i couldnot flash stock recovery because of the fail command not alowed,

thalaraj1992 said:
i couldnot flash stock recovery because of the fail command not alowed,
Click to expand...
Click to collapse
Is your bootloader unlocked?

my bootboader show "phone unlocked"

What are you typing?
"fastboot flash recovery recovery.img"
Is your recovery.img in the ADB / FASTBOOT folder?

Can't boot Honor 6 after firmware flash

Hi,
I have installed twrp on my Honor 6 (h60-l04), i tried to flash another firmware but now I can't boot it, theres only a frozen "HONOR" startscreen. I tried to install another firmware (original from huawei), but its no .img file , its a dload file with "update.app" in it. How can I flash the original firmware on my phone? (its Unlocked)
Please help me

follow this method http://forum.gsmhosting.com/vbb/f929/huawei-honor-6-tools-1900692/

You can flash the full Stock ROM manually too by following these steps, how to extract UPDATE.APP is also given
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Update process will start, let it finish.
Your device will be as good as new after this.

Honor 6x stuck in Recovery

Hey Guys,
I've tried to root my phone and while falshing the TWRP Recovery an Error occured.
Code:
C:\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.754s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.763s
So I thought I could exit the menu by typing "fastboot reboot". Now I'm stuck in in that startup window "Your device has been unlocked and can´t be trusted" and have 3 options:
(1) Press Power Key to continue.
(2) Press Vol...
(3) ...
If I press the power button its just rebooting and everything starts from beginning and if I'm trying to recover it my phone cant connect to the wifi "Getting package info failed".
HiSuite and usb debugging aren´t working.
Did I broke my Phone or is there a way to fix it?
Sorry for my bad englich ^^.
Thank you! Musark.

Hi,
Musark said:
fastboot boot twrp.img
Click to expand...
Click to collapse
this is the wrong command for flashing a recovery. You should type: "fastboot flash recovery twrp.img".
In case you still get this error then:
Musark said:
FAILED (remote: Command not allowed)
Click to expand...
Click to collapse
It's usually because your bootloader is still or again locked.

LinuxKernel said:
Hi,
this is the wrong command for flashing a recovery. You should type: "fastboot flash recovery twrp.img".
In case you still get this error then:
It's usually because your bootloader is still or again locked.
Click to expand...
Click to collapse
I followed the tutorial "How to Root Honor 6X [100% Working]" from CyberKey (can't post links at the moment).
Everything was fine until I wanted to boot my phone.

At least i want to use my Phone.
I rode a lot about dload but I've only found tutorials where i need access to my phone.
Could someone give me a link for a tutorial?

Musark said:
I followed the tutorial "How to Root Honor 6X [100% Working]" from CyberKey (can't post links at the moment).
Everything was fine until I wanted to boot my phone.
Click to expand...
Click to collapse
It's because the tutorial you followed is wrong when it comes to flashing the twrp recovery. It seems like you flashed the recovery image to the wrong partition (boot).
If you want to install a custom rom:
1. Put your phone into fastboot mode
2. Use the command: fastboot flash recovery twrp.img
3. Flash any custom rom
If you want to get the stock rom running again:
Way1:
1. Download the right stock recovery for your phone (marshmallow recovery if you want to flash marshmallow and nougat recovery if you want to install the nougat stock rom)
2. Put your phone into fastboot mode
3. Use the command: fastboot flash recovery recovery.img
4. Download the right firmware for your phone and extract the files
5. Create the "dload" folder on your external sd card
6. Put the update.app from the extracted files into your "dload" folder
7. Power off your phone
8. Hold volume up + volume down + power button until the honor logo appears. Wait until the phone boots into stock recovery and installs the stock rom.
Way2.
1. If you know which version of stock rom you had installed, e.g. B360 you can download the same firmware version again.
2. Use huawei firmware extractor to extract recovery.img and boot.img
3. Put your phone into fastboot mode
4. Use the command: fastboot flash recovery recovery.img
5. Use the command: fastboot flash boot boot.img
6. Reboot your phone (fastboot reboot)
In general you can also install any rom via fastboot:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot flash recovery recovery.img

LinuxKernel said:
If you want to get the stock rom running again:
Way1:
1. Download the right stock recovery for your phone (marshmallow recovery if you want to flash marshmallow and nougat recovery if you want to install the nougat stock rom)
2. Put your phone into fastboot mode
3. Use the command: fastboot flash recovery recovery.img
4. Download the right firmware for your phone and extract the files
5. Create the "dload" folder on your external sd card
6. Put the update.app from the extracted files into your "dload" folder
7. Power off your phone
8. Hold volume up + volume down + power button until the honor logo appears. Wait until the phone boots into stock recovery and installs the stock rom.
Click to expand...
Click to collapse
Wow Thanks, I've only 1 question. My computer isnt noticing that my phone is connected with him via usb.
How can i access my sd card without HiSuite or usb debugging? I could also put my sd card in a diffrent phone, but i think thats not the usual way.

Musark said:
Wow Thanks, I've only 1 question. My computer isnt noticing that my phone is connected with him via usb.
How can i access my sd card without HiSuite or usb debugging? I could also put my sd card in a diffrent phone, but i think thats not the usual way.
Click to expand...
Click to collapse
If you have no running rom on your phone, then as far as I know only via TWRP or as you already mentioned by another phone.

My phone is working fine now thanks.

Musark said:
My phone is working fine now thanks.
Click to expand...
Click to collapse
Good, next time, try installing it through TWRP app (if you are rooted) it's easier

LinuxKernel said:
It's because the tutorial you followed is wrong when it comes to flashing the twrp recovery. It seems like you flashed the recovery image to the wrong partition (boot).
If you want to install a custom rom:
1. Put your phone into fastboot mode
2. Use the command: fastboot flash recovery twrp.img
3. Flash any custom rom
If you want to get the stock rom running again:
Way1:
1. Download the right stock recovery for your phone (marshmallow recovery if you want to flash marshmallow and nougat recovery if you want to install the nougat stock rom)
2. Put your phone into fastboot mode
3. Use the command: fastboot flash recovery recovery.img
4. Download the right firmware for your phone and extract the files
5. Create the "dload" folder on your external sd card
6. Put the update.app from the extracted files into your "dload" folder
7. Power off your phone
8. Hold volume up + volume down + power button until the honor logo appears. Wait until the phone boots into stock recovery and installs the stock rom.
Way2.
1. If you know which version of stock rom you had installed, e.g. B360 you can download the same firmware version again.
2. Use huawei firmware extractor to extract recovery.img and boot.img
3. Put your phone into fastboot mode
4. Use the command: fastboot flash recovery recovery.img
5. Use the command: fastboot flash boot boot.img
6. Reboot your phone (fastboot reboot)
In general you can also install any rom via fastboot:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
i tried all previous mensioned method
i got stock firm ware and some custom rom from huawei support and xda developers
i tried dload method saying system update failed
itried fastboot flash recovery twrp.img
done
but i tried adb reboot recovery saying device not found
tried fastboot reboot done
my previous version was BLN-L22C675B360
please provied me with suitable firm ware and way to flash it
or tell me atleast how to go to twrp on fastboot mode when adb reboot recovery saying device not found
Thanks in advance

rom link plz
Musark said:
My phone is working fine now thanks.
Click to expand...
Click to collapse
give me rom link please on message or how did u get access to twrp tell me

please help ?

hello brothers I need help, I do not know how to solve this, Installing a rom aosp, everything was fine, only when I started installing another Rom aosp, I could not change the default recovery stock installed through TWRP , That's when all these problems started. My version of my cell phone is L09 C432 single SIM .. E used HUAWEI extract and remains the same through FASTBOOT

up help please ....

Please grab your full firmware from XDA. Just search for your original stock build number. Extract the Update.app file from the update.zip (should be about 3-4 gb). Then, create "dload" folder in your microsd card. Move update.app file to that folder. Then, shut off phone. Turn on phone by holding all buttons (vol up, vol down and power). Once the screen is on, release power but continue to hold both vol buttons. It will force eRecovery to update software via that update.app file. Once it's done, do a factory reset via eRecovery. It should boot to stock rom after that.

drift08 said:
Please grab your full firmware from XDA. Just search for your original stock build number. Extract the Update.app file from the update.zip (should be about 3-4 gb). Then, create "dload" folder in your microsd card. Move update.app file to that folder. Then, shut off phone. Turn on phone by holding all buttons (vol up, vol down and power). Once the screen is on, release power but continue to hold both vol buttons. It will force eRecovery to update software via that update.app file. Once it's done, do a factory reset via eRecovery. It should boot to stock rom after that.
Click to expand...
Click to collapse
I already tried that method, and it does not work simply the phone gets stuck in the beginning .. I already tried the fastboot method and tap It did not work either ... I need help from a developer ...
Perhaps Oreo no longer allows to do that function ... ???

it works fine. I just did it on my Mate 9 w/o any issues. What do you mean by phone getting stuck at the beginning? Did the TWRP flash went through or not?

drift08 said:
it works fine. I just did it on my Mate 9 w/o any issues. What do you mean by phone getting stuck at the beginning? Did the TWRP flash went through or not?
Click to expand...
Click to collapse
I'm stuck here .. I watched ..

hi,this happened to me before.
i cant remember how i did fix it but try these things...
First extract recovery image(Recovery.img or boot.img) from ur UPDATE.APP Or Extract the recovery_Ramdisk.img and RAMDISK.IMG from ur UPDATE.APP.(for Oreo,its Ramdisk and for nougat,its recovery.)
#for the first case(nougat),after u extracted that recovery.img Or boot.img file,u should flash them through fastboot with this command :fastboot flash recovery recovery.img then reboot and see if works if it didnt work,then try boot.img and use this: fastboot flash recovery Boot.img
##for the second case(oreo),after u extracted that recovery_Ramdisk.img file,u should flash it through fastboot with this command :fastboot flash recovery_ramdisk recovery_Ramdisk.img Then
u should flash RAMDISK.IMG through fastboot with this command :fastboot flash ramdisk RAMDISK.IMG
Due to image,im assuming u r running Nougat and missing recovery partition so try the first method and hope for the best.
EDIT: This is my post : https://forum.xda-developers.com/mate-9/help/help-unbrick-oreo-t3704000

ezraiil1 said:
hi,this happened to me before.
i cant remember how i did fix it but try these things...
First extract recovery image(Recovery.img or boot.img) from ur UPDATE.APP Or Extract the recovery_Ramdisk.img and RAMDISK.IMG from ur UPDATE.APP.(for Oreo,its Ramdisk and for nougat,its recovery.)
#for the first case(nougat),after u extracted that recovery.img Or boot.img file,u should flash them through fastboot with this command :fastboot flash recovery recovery.img then reboot and see if works if it didnt work,then try boot.img and use this: fastboot flash recovery Boot.img
##for the second case(oreo),after u extracted that recovery_Ramdisk.img file,u should flash it through fastboot with this command :fastboot flash recovery_ramdisk recovery_Ramdisk.img Then
u should flash RAMDISK.IMG through fastboot with this command :fastboot flash ramdisk RAMDISK.IMG
Due to image,im assuming u r running Nougat and missing recovery partition so try the first method and hope for the best.
EDIT: This is my post : https://forum.xda-developers.com/mate-9/help/help-unbrick-oreo-t3704000
Click to expand...
Click to collapse
Thanks I will try .. !! I will be very grateful if this works for me ... I hope to find the exits, I am very sad ...
@Ezaraiil .. I see that your case shows you the number 10 and the number 2., In my case it is the number 11 and 2 .. we hope everything goes well