Hi,
I have installed twrp on my Honor 6 (h60-l04), i tried to flash another firmware but now I can't boot it, theres only a frozen "HONOR" startscreen. I tried to install another firmware (original from huawei), but its no .img file , its a dload file with "update.app" in it. How can I flash the original firmware on my phone? (its Unlocked)
Please help me
follow this method http://forum.gsmhosting.com/vbb/f929/huawei-honor-6-tools-1900692/
You can flash the full Stock ROM manually too by following these steps, how to extract UPDATE.APP is also given
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Update process will start, let it finish.
Your device will be as good as new after this.
Related
Hello,
I have a big problem why i can t update my honor H60-L02.
Version Android 4.4.2
Version Emui 2.3
Serial number H60-L02V100R001CHNC00B121SP06
MI THIS MODEL HAS BEEN GIVEN IN THESE CONDITIONS, BUT PROBABLY HAS INSTALLED A ROM AND I CAN NOT update.
BUT I WOULD LIKE TO ITS ORIGINS restore (WITHOUT ROM) FOR MAKING ALL THE NEWS AND HIS POWER.
PLEASE HELP GUYS.
You can get back to stock by following these steps:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
My l01 flashed B560 of l04, how to go back to B535, please help me.,Thanks.
Follow these steps:
Download your phone's B535 firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put B535's UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get B535 firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Hello. My Honor 6 worked normally until i changed local.prop to make two sims able to use 4g.
Then, i rebooted it and now it doesnt go on. No logo screen, nothing.
Can someone help me or give me an idea?
Follow these steps, it might help you.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Hello
I unlocked my bootloader, then installed CWM, rooted then installed unofficial EMUI 4 ROM.
But I was EMUI 3.1 before...
So my Honor 6 didn't work after that and never couldn't boot the ROM
When I try to install CWM again by Multi-Tool, flashing error says that I need to check the confirmation dialog on my device but I cant't access to my device because there is no ROM :|
I installed EMUI 4 stock recovery and now what can I do for reinstall the rom -_-
Is there any way at all?
Have you tried downloading EMUI 3.0 stock ROM and using the three button method after placing it on your SD card? which is power + vol up + vol down?
In order to get back to full stock ROM follow these steps, since you already flashed recovery of a build number I don't know, do it again by following the procedure:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Enjoy your out of the box device..!!
DigiGoon said:
In order to get back to full stock ROM follow these steps, since you already flashed recovery of a build number I don't know, do it again by following the procedure:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Enjoy your out of the box device..!!
Click to expand...
Click to collapse
Hi Digicoon,
I tried your method to restore to stock ROM after successfully installing KangVip Rom.
Actually this custom rom was intended for Mate7, but beeing a simple port from Honor6Plus (as stated by the developer) I installed on my device without any problem. The only thing I noticed was that my device was no more a Honor6Plus PE-TL10, but a DUK-AL20 which I think is Mate7 model number, right?
The ROM works good but I wanted to revert it back to stock.
Anyway, I tried downloading the kitkat stock rom for my Honor6Plus (it should be PE-TL10_EMUI3.0_Android4.4_V100R001CHNC00B260.zip) , extracted the UPDATE.APP and the four files you stated above, flashed them via fastboot and then put the entire dload folder inside the root of my SD card.
The phone hangs on the boot screen and then boot loop... no way to restore it.
I reverted it back to custom rom (via nandroid backup), even tried to flash the stock recovery.img to use the "Three buttons method" but with no luck, every time it stucks on boot logo and bootloop.
Do you have any idea what could it be? Maybe a "partitions" problem, due to different model number?
Thanks in advance and Merry Christmas
Also work for rooted L04 (TWRP) back to lollipop?
DigiGoon said:
In order to get back to full stock ROM follow these steps, since you already flashed recovery of a build number I don't know, do it again by following the procedure:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Enjoy your out of the box device..!!
Click to expand...
Click to collapse
Does this also work in my case?
I have a rooted L-04 with TWRP and the latest b831-software. Now that I realised GPS is not working anymore I want to go back to Lollipop.
Has anyone tried it?
Thanks for your help.
Zox37 said:
Hello
I unlocked my bootloader, then installed CWM, rooted then installed unofficial EMUI 4 ROM.
But I was EMUI 3.1 before...
So my Honor 6 didn't work after that and never couldn't boot the ROM
When I try to install CWM again by Multi-Tool, flashing error says that I need to check the confirmation dialog on my device but I cant't access to my device because there is no ROM :|
I installed EMUI 4 stock recovery and now what can I do for reinstall the rom -_-
Is there any way at all?
Click to expand...
Click to collapse
how i can root my device honor 6
my model H60-L04C900B521
i unlocked my boot loader via official site
but i cant root my device
i dont have a rom on device
my device stuck on bootloop
hello brothers I need help, I do not know how to solve this, Installing a rom aosp, everything was fine, only when I started installing another Rom aosp, I could not change the default recovery stock installed through TWRP , That's when all these problems started. My version of my cell phone is L09 C432 single SIM .. E used HUAWEI extract and remains the same through FASTBOOT
up help please ....
Please grab your full firmware from XDA. Just search for your original stock build number. Extract the Update.app file from the update.zip (should be about 3-4 gb). Then, create "dload" folder in your microsd card. Move update.app file to that folder. Then, shut off phone. Turn on phone by holding all buttons (vol up, vol down and power). Once the screen is on, release power but continue to hold both vol buttons. It will force eRecovery to update software via that update.app file. Once it's done, do a factory reset via eRecovery. It should boot to stock rom after that.
drift08 said:
Please grab your full firmware from XDA. Just search for your original stock build number. Extract the Update.app file from the update.zip (should be about 3-4 gb). Then, create "dload" folder in your microsd card. Move update.app file to that folder. Then, shut off phone. Turn on phone by holding all buttons (vol up, vol down and power). Once the screen is on, release power but continue to hold both vol buttons. It will force eRecovery to update software via that update.app file. Once it's done, do a factory reset via eRecovery. It should boot to stock rom after that.
Click to expand...
Click to collapse
I already tried that method, and it does not work simply the phone gets stuck in the beginning .. I already tried the fastboot method and tap It did not work either ... I need help from a developer ...
Perhaps Oreo no longer allows to do that function ... ???
it works fine. I just did it on my Mate 9 w/o any issues. What do you mean by phone getting stuck at the beginning? Did the TWRP flash went through or not?
drift08 said:
it works fine. I just did it on my Mate 9 w/o any issues. What do you mean by phone getting stuck at the beginning? Did the TWRP flash went through or not?
Click to expand...
Click to collapse
I'm stuck here .. I watched ..
hi,this happened to me before.
i cant remember how i did fix it but try these things...
First extract recovery image(Recovery.img or boot.img) from ur UPDATE.APP Or Extract the recovery_Ramdisk.img and RAMDISK.IMG from ur UPDATE.APP.(for Oreo,its Ramdisk and for nougat,its recovery.)
#for the first case(nougat),after u extracted that recovery.img Or boot.img file,u should flash them through fastboot with this command :fastboot flash recovery recovery.img then reboot and see if works if it didnt work,then try boot.img and use this: fastboot flash recovery Boot.img
##for the second case(oreo),after u extracted that recovery_Ramdisk.img file,u should flash it through fastboot with this command :fastboot flash recovery_ramdisk recovery_Ramdisk.img Then
u should flash RAMDISK.IMG through fastboot with this command :fastboot flash ramdisk RAMDISK.IMG
Due to image,im assuming u r running Nougat and missing recovery partition so try the first method and hope for the best.
EDIT: This is my post : https://forum.xda-developers.com/mate-9/help/help-unbrick-oreo-t3704000
ezraiil1 said:
hi,this happened to me before.
i cant remember how i did fix it but try these things...
First extract recovery image(Recovery.img or boot.img) from ur UPDATE.APP Or Extract the recovery_Ramdisk.img and RAMDISK.IMG from ur UPDATE.APP.(for Oreo,its Ramdisk and for nougat,its recovery.)
#for the first case(nougat),after u extracted that recovery.img Or boot.img file,u should flash them through fastboot with this command :fastboot flash recovery recovery.img then reboot and see if works if it didnt work,then try boot.img and use this: fastboot flash recovery Boot.img
##for the second case(oreo),after u extracted that recovery_Ramdisk.img file,u should flash it through fastboot with this command :fastboot flash recovery_ramdisk recovery_Ramdisk.img Then
u should flash RAMDISK.IMG through fastboot with this command :fastboot flash ramdisk RAMDISK.IMG
Due to image,im assuming u r running Nougat and missing recovery partition so try the first method and hope for the best.
EDIT: This is my post : https://forum.xda-developers.com/mate-9/help/help-unbrick-oreo-t3704000
Click to expand...
Click to collapse
Thanks I will try .. !! I will be very grateful if this works for me ... I hope to find the exits, I am very sad ...
@Ezaraiil .. I see that your case shows you the number 10 and the number 2., In my case it is the number 11 and 2 .. we hope everything goes well