Hello. My Honor 6 worked normally until i changed local.prop to make two sims able to use 4g.
Then, i rebooted it and now it doesnt go on. No logo screen, nothing.
Can someone help me or give me an idea?
Follow these steps, it might help you.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Related
Hello,
I have a big problem why i can t update my honor H60-L02.
Version Android 4.4.2
Version Emui 2.3
Serial number H60-L02V100R001CHNC00B121SP06
MI THIS MODEL HAS BEEN GIVEN IN THESE CONDITIONS, BUT PROBABLY HAS INSTALLED A ROM AND I CAN NOT update.
BUT I WOULD LIKE TO ITS ORIGINS restore (WITHOUT ROM) FOR MAKING ALL THE NEWS AND HIS POWER.
PLEASE HELP GUYS.
You can get back to stock by following these steps:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
My l01 flashed B560 of l04, how to go back to B535, please help me.,Thanks.
Follow these steps:
Download your phone's B535 firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put B535's UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get B535 firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
After no successful firmware honor+ PE-TL10 does not start when you turn on a few seconds hangs on Android logo, then goes out and some times the indicator flashes red and green, firmware method three buttons does not start.
In recovery is not included in the mode bootloader.
Bootloader is locked. What to do?
andrei1269 said:
After no successful firmware honor+ PE-TL10 does not start when you turn on a few seconds hangs on Android logo, then goes out and some times the indicator flashes red and green, firmware method three buttons does not start.
In recovery is not included in the mode bootloader.
Bootloader is locked. What to do?
Click to expand...
Click to collapse
I have the same issue. Did you ever find a solution?
Fix for this issue
Hi! I have the same problem and i fix it.
How to?
1. U need to unclock bootloader first
2. Downolad software 4.4.2 hihonor.com/pl/support/software-list/index.htm and put UPDATE.app file in scdard dload folder
3. Extract recovery.img boot.img cust.img system.img with Huawei Update Extractor (put them to the adb folder)
4. Enter to fastboot mode (vol - and plug the usb cable)
5. Flash via fastboot with command:
- flash fastboot recovery RECOVERY.img
- flash fastboot boot BOOT.img
- flash fastboot cust CUST.img
- flash fastboot system SYSTEM.img
6. Unplug cable and click vol+, vol- and power and Keep far until the update process will begin
7. If process crash shut down system
8. Click vol+ and power and hold
9. In emui recovery do wipe data/factory reset and wipe cache
10. Reboot system and phone will stats.
Sorry for my english but i want to help
you can even simply flash that update.app ,
comand not alowed
Hi,
I have installed twrp on my Honor 6 (h60-l04), i tried to flash another firmware but now I can't boot it, theres only a frozen "HONOR" startscreen. I tried to install another firmware (original from huawei), but its no .img file , its a dload file with "update.app" in it. How can I flash the original firmware on my phone? (its Unlocked)
Please help me
follow this method http://forum.gsmhosting.com/vbb/f929/huawei-honor-6-tools-1900692/
You can flash the full Stock ROM manually too by following these steps, how to extract UPDATE.APP is also given
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Update process will start, let it finish.
Your device will be as good as new after this.
i cant boot into my recovery i didnt know what happen.. pls help.. i just want to factory reset but it cant be done.. i have a rooted honor4c..
ichiboy said:
i cant boot into my recovery i didnt know what happen.. pls help.. i just want to factory reset but it cant be done.. i have a rooted honor4c..
Click to expand...
Click to collapse
If you have a rooted phone then you have an unlocked bootloader.
Download the latest firmware for your device.
Extract to get UPDATE.APP.
Use Huawei update extractor to extract boot.img, recovery.img, Cust.img and system.img from UPDATE.APP.
Download and install latest Android SDK and run it to install platform tools only. You dont need anything else.
Copy image files to platform-tools folder usually located in C:\program files(x86)\android\android-sdk
Turn off your phone and press and hold power+vol down to boot into bootloader mode.
Shift+right click platform-tools and select open command window here.
Fire these commands.
Fastboot flash boot boot.img
Fastboot flash custom Cust.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
copy dload folder containing UPDATE.APP to SD card.
Insert SD card in your phone.
Disconnect phone from pc and simultaneously press and hold power + vol down + vol up until your phone restarts. Let go of power but keep pressing the other two for 5 seconds more.
Forced update will start and you will have a new OS.