Related
I have UNLOCKED boatloader but S-On
i searched the whole forum to find a way to gain root without s-off , but I didn't find
I tried to flash CWM but it didn't work .. what should I do ???
http://forum.xda-developers.com/showthread.php?t=1452173to
This definitely works. Tested it myself.
Here is the link for recovery used to flash through fastboot: link
Extract recovery.img, put it in a folder where your fastboot tools are, connect your phone to pc in fastboot mode, open cmd, navigate to the folder where your recovery.img is and then execute this command: fastboot flash recovery recovery.img
After that, reboot into recovery and flash su-2.3.6.1-ef-signed.zip from the recovery (install from sd card option).
That's it.
Regards
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
shubham412302 said:
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
Click to expand...
Click to collapse
maybe you can flash the b500 again?
shubham412302 said:
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
Click to expand...
Click to collapse
Hi,
The same boot loop error also I encountered , and here is how i solved it.
1. First U need to download this tool -> HONOR_6_and_6Plus_Multi-Tool
2. run the Honor6MultiTool.bat
3. it will ask to install universal ADB driver. follow the instruction and install
4. then 6th option will be UNBRICK, Enter ur choice: 6
5. Then u follow the instruction
After that the phone will boot.
If any problem will occur do comment below.
All The Best!!
biswajit_kar said:
Hi,
The same boot loop error also I encountered , and here is how i solved it.
1. First U need to download this tool -> HONOR_6_and_6Plus_Multi-Tool
2. run the Honor6MultiTool.bat
3. it will ask to install universal ADB driver. follow the instruction and install
4. then 6th option will be UNBRICK, Enter ur choice: 6
5. Then u follow the instruction
After that the phone will boot.
If any problem will occur do comment below.
All The Best!!
Click to expand...
Click to collapse
the device does not enters fastboot mode just show the bootlogo
it enters fastboot but still the device wont boot
can you tell me the commands to flash all files from the update.app from fastboot
maybe that will solve the issue
DOWNLOAD stock firmware (update.app) extract from it Recovery.img system.img boot.img cache.img cust.img.and userdata.img. then turn your mobile in fastboot and connect to usb, open CMD in PC and write CD "path to adb.exe", when you are there, copy extracted files there too and write in CMD this lines:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
when you will finish write FASTBOOT REBOOT and that's all
Sent from my H60-L04 using XDA Free mobile app
Following. Reply if what Biswajit told you worked in reverting from Lollipop. Have you done this yourself Biswajit?
biswajit_kar said:
DOWNLOAD stock firmware (update.app) extract from it Recovery.img system.img boot.img cache.img cust.img.and userdata.img. then turn your mobile in fastboot and connect to usb, open CMD in PC and write CD "path to adb.exe", when you are there, copy extracted files there too and write in CMD this lines:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
when you will finish write FASTBOOT REBOOT and that's all
Sent from my H60-L04 using XDA Free mobile app
Click to expand...
Click to collapse
i tried this already but it did not work
i think flashing all the 22 files from the update.app file will work
or i have to wait till the lollipop update file comes out
my bootloader is unlocked so will my device be repaired under warranty(huawei didn't mentioned voiding warranty by unlocking bootloader while getting the code)
shubham412302 said:
i tried this already but it did not work
i think flashing all the 22 files from the update.app file will work
or i have to wait till the lollipop update file comes out
my bootloader is unlocked so will my device be repaired under warranty(huawei didn't mentioned voiding warranty by unlocking bootloader while getting the code)
Click to expand...
Click to collapse
Yes.
Though You can relock that by using the tool HONOR_6_and_6Plus_multi_tool from here .
try it. wish u luck.
http://forum.xda-developers.com/showthread.php?t=3142268
shubh_007 said:
http://forum.xda-developers.com/showthread.php?t=3142268
Click to expand...
Click to collapse
That would have worked but i already gave my phone to the service centre
shubham412302 said:
the device does not enters fastboot mode just show the bootlogo
it enters fastboot but still the device wont boot
can you tell me the commands to flash all files from the update.app from fastboot
maybe that will solve the issue
Click to expand...
Click to collapse
try this method
http://forum.xda-developers.com/honor-6/general/revert-h60-l04-emui-3-1-to-emui-3-0-t3142268
I tried to root my MOTO G 2015 XT1550 using KINGROOT app.At that time it was running marshmallow 6.01 ,after running the kingroot application the phone restarted and stuck in startup menu with fastboot mode.Please help me out of this
Are u able to open stock recivery?
And have unlocked bootloader?
Amirphp said:
Are u able to open stock recivery?
And have unlocked bootloader?
Click to expand...
Click to collapse
No,I have not unlocked the bootloader,what i did was that i installed kingroot app and tried to root from the app.I don't know what it did to my device but now its stuck in fastboot mode.Please tell me how to open stock recovery.
divyandu said:
I tried to root my MOTO G 2015 XT1550 using KINGROOT app.At that time it was running marshmallow 6.01 ,after running the kingroot application the phone restarted and stuck in startup menu with fastboot mode.Please help me out of this
Click to expand...
Click to collapse
1. Stay calm.
1.a You cannot root your phone without unlocking bootloader.
1.b. You will need to do a thorough reading of how to unlock bootloader from threads in this forum or else where. You will also need to read and understand the process of fastboot mode of flashing stock firmware.
2. Since you are able to enter fastboot mode connect your mobile to your PC with your USB chord, open the minimal adb fastboot mode, try to get the unlock key, visit Motorola site and get your bootloader unlock key. There are other threads explaning how to do this. Download the correct stock firmware identified based on the phone model no. Eg xt1550 dual sim and store it onto your PC, you will also need the minimal adb fastboot file, Motorola drivers, twrp3.0., SuperSU 2.62-3 ( no other version of SuperSU works, only this version)
3. Once you unlock your bootloader, flash the stock firmware which you need to download from other thread of this forum using fastboot mode. Note, marshmallow 6.0.1 has 7 sparsechunk files. So be careful about fast boot commands. Do not use the commands you find on the stock firmware thread blindly as these have commands only for 6 sparsechunk files. You may open the flash file from the downloaded firmware to get an idea of all the commands to be typed and their respective partitions too.
4. Flash twrp to replace stock recovery. Enter recovery from fastboot mode using volume keys to navigate and powerkey to select.
5. Once into twrp, press mounts tab and tick to mount USB storage, and copy the SuperSU 2.62-3 file into the external memory card of your phone from pc. Install this SuperSU.zip file without unzipping it by pressing the install tab in twrp home screen and selecting the zip file and sliding the installer.
6. Reboot system. Done! You have your phone rooted the perfect way.
When I switch on my device(moto g3) the following message appears.
Start Up Failed
Your device didn't startup successfully.
Use the Software Repair Assistant on your computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation,backup to fastboot
Boot up failed
Please help with a solution asap??
divyandu said:
When I switch on my device(moto g3) the following message appears.
Start Up Failed
Your device didn't startup successfully.
Use the Software Repair Assistant on your computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation,backup to fastboot
Boot up failed
Please help with a solution asap??
Click to expand...
Click to collapse
Dear friend please have patience...
These things require a cool mind...
Did you try the hardware way of entering the fastboot mode? If not keep the volume down and power button pressed for some time till ulyou enter fastboot mode. Basically there is no info if you have tried to follow what was given earlier...have you tried it?
I am unable to unlock the bootloader from adb.
The problem I think is that my phone's USB debugging is off.Anybody plz tell me how do I turn my bootloader on from fastboot or recovery mode.
divyandu said:
No,I have not unlocked the bootloader,what i did was that i installed kingroot app and tried to root from the app.I don't know what it did to my device but now its stuck in fastboot mode.Please tell me how to open stock recovery.
Click to expand...
Click to collapse
@divyandu follow this and let me know if it works.
http://forum.xda-developers.com/2015...k-6-0-t3349468
you can get the Factory Firmware's on this Link.
http://forum.xda-developers.com/2015...mages-t3169639
divyandu said:
I am unable to unlock the bootloader from adb.
The problem I think is that my phone's USB debugging is off.Anybody plz tell me how do I turn my bootloader on from fastboot or recovery mode.
Click to expand...
Click to collapse
Dear friend,
You need not have your bootloader unlocked to flash factory firmware
Quote from the XDA forum factory firmware link:
"Frequently Asked Questions:
Can I restore Factory Firmware if my Bootloader is locked?
Yes."
And if you are still stuck with a phone stuck at logo or is looping at the boot, either follow steps given elsewhere in this forum or follow the method that I am enumerating below which is what I would have done (which in principle is same as given elsewhere).
Getting your phone revived is your first priority. Unlocking bootloader and rooting is secondary.
You would be needing a pc with administrator privilege, internet connection and of course your phone along with the usb cable.
You would be needing the drivers for your phone, minimal adb and fastboot files, stock firmware for your phone model. All these files are available in the XDA forum as per links provided by others or as per this link
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
1. Correctly install drivers onto your pc using administrator privileges.
2. Unzip and Install the minimal adb and fastboot files onto your pc into some specific directory and click the executable files once. This would ensure that all the files are loaded and dos prompt recognizes the adb and fastboot commands (commands are different for ADB stage and FASTBOOT stage, what you are going to use is directly the fastboot stage commands given below). Install as an administrator. Note this specific directory and file where you unzipped and installed the minimal adb file as you will need it in the below step.
3. Download the stock 6.0.1 mm firmware for XT1550 from the link below store it in you pc.
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Unzip the stock firmware. Now copy all the files of the stock firmware (all of them) into the specific file of the minimal adb and fastboot which you unzipped into and installed earlier and noted the location. You need to copy all the firmware files into the minimal adb and fastboot directory as that way you avoid specifying the location of the files for each flash command which is both simple and saves us from a lot of mistakes.
4. After copying all the unzipped stock firmware files in the minimal adb fastboot directory, press the shift button on keyboard and right click the mouse on the screen where in a dialogue box appears and choose to open the command prompt in this directory. This will open a command prompt with default reference to the current directory.
5. In what ever condition your phone is in (other than the fastboot mode), press simultaneously the volume down key + power button together for about 8-10 secs. This action will automatically lead your phone to enter the fastboot mode. After entering the fastboot mode you can connect the phone to your pc using a usb cable and your pc should ring a note that it has detected the phone. To check if the pc has detected the phone and the link is established, type the following command in the command prompt window which you opened in step 4
fastboot devices
This command displays your device number if all is well in the command prompt window. NOW you are ready to flash the stock firmware I.E. after successful detection of the phone by your pc.
6. Carefully type each and every of the commands in italics or copy and paste them ONE by ONE and wait for each command to be executed. The commands are being given below to help you (these are for flashing the 6.0.1mm onto the XT1550 only) in the opened command prompt window (Ensure that you do not miss any of the commands and follow the order given below) :
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
If you have done every thing correctly till now you should see the command prompt returning a OKAY afer each command with the time taken for flashing each file. This should revive your device first.
After this you may try unlocking the bootloader and rooting as the next step. But be patient and retain a cool head to read first and think clearly..... you will need it a lot as is necessary for such things... good luck and happy learning!!
Follow the instructions in this thread ...to unlock bootloader and root...
Works 100%.
http://forum.xda-developers.com/2015-moto-g/general/root-how-to-root-moto-g-2015-android-t3320113
arunhebbare said:
Dear friend,
You need not have your bootloader unlocked to flash factory firmware
Quote from the XDA forum factory firmware link:
"Frequently Asked Questions:
Can I restore Factory Firmware if my Bootloader is locked?
Yes."
And if you are still stuck with a phone stuck at logo or is looping at the boot, either follow steps given elsewhere in this forum or follow the method that I am enumerating below which is what I would have done (which in principle is same as given elsewhere).
Getting your phone revived is your first priority. Unlocking bootloader and rooting is secondary.
You would be needing a pc with administrator privilege, internet connection and of course your phone along with the usb cable.
You would be needing the drivers for your phone, minimal adb and fastboot files, stock firmware for your phone model. All these files are available in the XDA forum as per links provided by others or as per this link
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
1. Correctly install drivers onto your pc using administrator privileges.
2. Unzip and Install the minimal adb and fastboot files onto your pc into some specific directory and click the executable files once. This would ensure that all the files are loaded and dos prompt recognizes the adb and fastboot commands (commands are different for ADB stage and FASTBOOT stage, what you are going to use is directly the fastboot stage commands given below). Install as an administrator. Note this specific directory and file where you unzipped and installed the minimal adb file as you will need it in the below step.
3. Download the stock 6.0.1 mm firmware for XT1550 from the link below store it in you pc.
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Unzip the stock firmware. Now copy all the files of the stock firmware (all of them) into the specific file of the minimal adb and fastboot which you unzipped into and installed earlier and noted the location. You need to copy all the firmware files into the minimal adb and fastboot directory as that way you avoid specifying the location of the files for each flash command which is both simple and saves us from a lot of mistakes.
4. After copying all the unzipped stock firmware files in the minimal adb fastboot directory, press the shift button on keyboard and right click the mouse on the screen where in a dialogue box appears and choose to open the command prompt in this directory. This will open a command prompt with default reference to the current directory.
5. In what ever condition your phone is in (other than the fastboot mode), press simultaneously the volume down key + power button together for about 8-10 secs. This action will automatically lead your phone to enter the fastboot mode. After entering the fastboot mode you can connect the phone to your pc using a usb cable and your pc should ring a note that it has detected the phone. To check if the pc has detected the phone and the link is established, type the following command in the command prompt window which you opened in step 4
fastboot devices
This command displays your device number if all is well in the command prompt window. NOW you are ready to flash the stock firmware I.E. after successful detection of the phone by your pc.
6. Carefully type each and every of the commands in italics or copy and paste them ONE by ONE and wait for each command to be executed. The commands are being given below to help you (these are for flashing the 6.0.1mm onto the XT1550 only) in the opened command prompt window (Ensure that you do not miss any of the commands and follow the order given below) :
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
If you have done every thing correctly till now you should see the command prompt returning a OKAY afer each command with the time taken for flashing each file. This should revive your device first.
After this you may try unlocking the bootloader and rooting as the next step. But be patient and retain a cool head to read first and think clearly..... you will need it a lot as is necessary for such things... good luck and happy learning!!
Click to expand...
Click to collapse
Ty everyone for the support and the quick answers.My phone is unbricked and is running 6.0.1
Special thanks arunhebbare your suggestion worked out finally
I tried to root my MOTO G 2015 XT1550 using KINGROOT app.At that time it was running marshmallow 6.01 ,after running the kingroot application the phone restarted and stuck in startup menu with fastboot mode.
:crying: When I switch on my device(moto g3) the following message appears.
Start Up Failed
Your device didn't startup successfully.
Use the Software Repair Assistant on your computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation,backup to fastboot
Boot up failed
plz help me
vidya_sagar said:
I tried to root my MOTO G 2015 XT1550 using KINGROOT app.At that time it was running marshmallow 6.01 ,after running the kingroot application the phone restarted and stuck in startup menu with fastboot mode.
:crying: When I switch on my device(moto g3) the following message appears.
Start Up Failed
Your device didn't startup successfully.
Use the Software Repair Assistant on your computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation,backup to fastboot
Boot up failed
plz help me
Click to expand...
Click to collapse
You tried the above solution a few posts back??
Broadcasted from Zeta Reticuli
Gravemind2015 said:
You tried the above solution a few posts back??
Broadcasted from Zeta Reticuli
Click to expand...
Click to collapse
i'm not sure about Enabling USB debugging. is that above process will work??when i don't enable usb debugging?
tnx for ur reply
---------- Post added at 10:45 AM ---------- Previous post was at 10:07 AM ----------
vidya_sagar said:
i'm not sure about Enabling USB debugging. is that above process will work??when i don't enable usb debugging?
tnx for ur reply
Click to expand...
Click to collapse
if u dont mind can u post the vedio of this process
bad
iam unlocked my boot loader in my moto g3 running 6.0.1...after i try to flash twrp to root ..but it is no worked ..so i use king root app to root my phone root installed successfully ...but my sims signels are not showing ...so i do hard reset ...after phone is on and stucks at language selection what should i do
vidya_sagar said:
i'm not sure about Enabling USB debugging. is that above process will work??when i don't enable usb debugging?
tnx for ur reply
---------- Post added at 10:45 AM ---------- Previous post was at 10:07 AM ----------
if u dont mind can u post the vedio of this process
Click to expand...
Click to collapse
My internet is not fast enough for a video upload sorry. But if you are not sure about the process you can search lost101's firmware flashing guide in general section. I have flashed it and it works.
Broadcasted from Zeta Reticuli
Hallo everybody.
Summarizing: with a new, clear Huawei Mate 8 (HUAWEI NXT-L29) I unlocked the bootloader (default Huawei procedure).
I rooted the smartphone using SuperSU and all's perfect - my apps require and gain root permissions.
No, a new OTA upload comes into being.
I try to install: the smartphone reboots and remains stuck on "Your device has been unlocked and can't be trusted" or whatever...
I try to "fastboot oem lock ******" (the code I obtained unlocking), but it tells me "FAILED (remote: root type is risk)".
I try to reflash the stock ROM (to do a hard reset), either by the "dload" or the "*#*#2846579#*#*" method: it stays stuck on "Your device has been unlocked and can't be trusted" or whatever...
Any advice? Where am I wrong? And what to do next to update the ROM?
Thank you!
Any suggestion? Come on, guys, you're the best...
First thing to flash OTA - stock recovery. Flash it from fast boot and try again.
Can you tell me step by step? And where to download files?
Download your Firmware frome here
http://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
Unpack it.
Download Huawei Extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Open Huawei Ectract and open the UPDATE.APP from your unpacked Update.zip and extract the RECOVERY.img
Reboot into Bootloader
Flash the Recovery.img via Fastboot (fastboot flash recovery RECOVERY.img)
Reboot
You on Stock Recovery and can install the Updates from the first Link
Too much kind! I'll let you know...
Thank you!
letschky said:
Download your Firmware frome here
http://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
Unpack it.
Download Huawei Extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Open Huawei Ectract and open the UPDATE.APP from your unpacked Update.zip and extract the RECOVERY.img
Reboot into Bootloader
Flash the Recovery.img via Fastboot (fastboot flash recovery RECOVERY.img)
Reboot
You on Stock Recovery and can install the Updates from the first Link
Click to expand...
Click to collapse
I'm sorry, your way doesn't work.
The RECOVERY.img is flashed good, but when I try to install the UPDATE.APP, it remains stuck on "Your device has been unlocked and can't be trusted".
this is normal with unlocked Bootloader.
You can extract SYSTEM.img,CUST.img,BOOT.img and flash via Fastboot
Reboot into Bootloader and flash this 3 img files with this command
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash system SYSTEM.img
and Factory Reset
but this message at startup is normal
"Your device has been unlocked and can't be trusted"
I'm using an honor 8 and i'm following along to XDA's instructions. I flashed TWRP and did the command 'adb reboot recovery' and now my phone has been on the "your device is booting now..." screen for quite some time. Is there some way to fix this?
https://forum.xda-developers.com/showpost.php?p=76790675&postcount=2
If you can boot into bootloader mode:
1. Download a firmware compatible for your honor from firmware finder for huawei
2. Download and install huawei extractor
3. Extract system.img, boot.img, recovery.img from the firmware
4. Plug your phone to the computer and boot into bootloader
5. Open command prompt and type:
Fastboot flash system system.img
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
6. Shut down your phone and boot into recovery
7. Perform a factory reset
8. Should be done!