Related
Out of the four cases I have tried for the Charge I think I finally found my favorite. The Trident Aegis has some problems as did all the cases I tried but it is the best. It comes in 5 colors and they look great. I got the blue one and it looks as good in person as it does on the site.
The materials used are very nice and the surface has a great anti-skid finish that provides great in hand grip. The hard plastic outer shell covers all 4 sides of the phone for a tight fit. It is thicker then the Otterbox Commuter at the phones curve at the bottom but I actually like that. It gives the phone a great feel when using it in landscape mode. Even though it is a bit bulky it does fit in pockets easily. The corners of the case are heavily padded for drop protection.
All of the ports are covered to prevent dust, moisture or any other unwanted substance getting into them. I found that the usb port was hard to open at times (I have no finger nails) and that the hdmi cover opens a little to easily. The power button and volume rocker are covered as well and easily accessible. One of the things I really like is the dust filter on the speaker opening. The speaker is loud and clear and will not be getting dust in it. The lip that goes around the screen is not as big as the Otterbox but provides just as good of protection.
The protection this case offers is great. Its not as heavy duty as the Otterbox Defender or the Trident Kracken II but it is good enough for every day use. It comes with a screen protector that I did not use. I would recommend this case without a doubt. While its not perfect its does correct the things that I did not like about the Otterbox Commuter and provides just as good of protection. If I can get access to a camera at some point I will post some pictures to go along with the review.
Thanks for all of the info. both here and via PM.
I want to hold out for the Kraken 2, but my Otterbox is driving me nuts so I might just grab an Aegis.
Rememo said:
I want to hold out for the Kraken 2, but my Otterbox is driving me nuts so I might just grab an Aegis.
Click to expand...
Click to collapse
The Kraken 2 looks pretty beast to be sure but I'm not sure if it's not just too think... Hows the thickness of it compared to the otterbox defender?
Rememo said:
Thanks for all of the info. both here and via PM.
I want to hold out for the Kraken 2, but my Otterbox is driving me nuts so I might just grab an Aegis.
Click to expand...
Click to collapse
What aren't you liking about the Otterbox? I asking because I'm thinking of picking one up for myself.
corys00 said:
What aren't you liking about the Otterbox? I asking because I'm thinking of picking one up for myself.
Click to expand...
Click to collapse
I'll second this...was thinking about doing the same. Otterbox no good?
Sent from my ADR6350 using XDA App
The top and the bottom edges of the Otterbox are not covered by the hard plastic so it is kind of loose. The buttons are also covered which I don't like and the hard plastic is kind of slippery.
corys00 said:
What aren't you liking about the Otterbox? I asking because I'm thinking of picking one up for myself.
Click to expand...
Click to collapse
I don't like how the top of the silicon portion isn't supported by the hard case, so it easily separates from the phone if you lift the phone by that area.
I also find that, while it's nice to slip in and out of your pocket, the hard case is too slippery for my tastes. It slides off of sloped surfaces and I've almost dropped the phone a few times now.
Personally, I like having the hard buttons covered, but the silicon that covers the buttons doesn't seem to fit tight against the screen, so debris can work its way underneath.
I never use the HDMI port, so not having it protected by silicon makes no sense to me.
Don't let my dislikes make it seem like it's a bad case, it's not, but I think the Aegis will fit me better. The Aegis should arrive tomorrow, so we shall see.
I'm thinking of making a short video to show the differences between the cases. I'll let you know when it's up.
Moondrius and Romemo,
Have either of you had the Incipio case before your trident case? I'm wondering how they compare. I'm surprised to see the trident case so slim since I always incorporate trident cases to be monsters.
I had the Incipio double cover and the Feather and both were sent back. The double cover was alright until I noticed it covered the hdmi port. It did seem thin and less bulky. The Aegis is the most bulky of the 3 but in a good way I would say. Its slightly thicker at the bottom. I would say I liked the Double Cover more then the Otterbox but I used it for like 5 minutes. The Feather was complete garbage. Its a shame because I really liked the Feather when I had my Atrix.
Thanks. I have the Incipio double cover. I really like it since I never use hdmi, not sure I can handle anything that would be bulkier.
Pics pl0x?
Sent from my Droid Charge running Humble 1.4
pics? link to site? something
dennis- said:
pics? link to site? something
Click to expand...
Click to collapse
For the Incipio case? It's here:
http://www.myincipio.com/Samsung-Dr...CRYLIC-Hard-Shell-Case-with-Silicone-Core.asp
Does verizon sell the Incipio case for the Charge? If so, how much do they ask for it? I really like the looks of the Incipio case and I am just trying to figure out if a covered HDMI port is worth it. I get 25% off accessories at Verizon so if the price is reasonable I wouldn't mind picking one up to try it out.
So I get my Charge on Monday. I have the cyclops series trident case for the fassy. It felt good. Overall I liked it. So I purchased the aegis. I bought it from the same ebay seller I got the fassy from: cyclopscase.
A good price too 23.33 with free shipping.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260822580193&ssPageName=STRK:MEWNX:IT
My dust cover for the hdmi port ripped off yesterday. I went to go use it and while pulling the tab off of the phone it just ripped right off. That tab is really flimsy and I used very little force around it.
moondrius said:
My dust cover for the hdmi port ripped off yesterday. I went to go use it and while pulling the tab off of the phone it just ripped right off. That tab is really flimsy and I used very little force around it.
Click to expand...
Click to collapse
Yikes... Yeah, that's a definite weak spot. I was thinking that, if I go back to my Aegis, I would just remove that cover.
Is it easy to take in and out of the case? I bought the media dock and the car dock, which leaves no room for a case. So I've been using the zagg shield that covers the entire phone. Problem is with the car dock, the sides have been tearing off due to putting the phone in and out of the dock. It's pretty useless, so I want a real case, but I don't want to buy a new car or media dock for it.
Does the Aegis come off and on pretty easily?
type_2 said:
Is it easy to take in and out of the case? I bought the media dock and the car dock, which leaves no room for a case. So I've been using the zagg shield that covers the entire phone. Problem is with the car dock, the sides have been tearing off due to putting the phone in and out of the dock. It's pretty useless, so I want a real case, but I don't want to buy a new car or media dock for it.
Does the Aegis come off and on pretty easily?
Click to expand...
Click to collapse
IMHO no. The hard outer shell is designed to be a reeeeally tight fit around the soft inside cover. As a current owner I wouldn't want to constantly take it off and put it back on for a car dock. Plus I think it would eventually wear on the buttons and dust covers.
emtee_skull said:
IMHO no. The hard outer shell is designed to be a reeeeally tight fit around the soft inside cover. As a current owner I wouldn't want to constantly take it off and put it back on for a car dock. Plus I think it would eventually wear on the buttons and dust covers.
Click to expand...
Click to collapse
Damn, thanks for the response. I guess I'll be running the sides of my phone naked with the Zagg shield on the front and back
Are there any cases for the Atrix aside from the offerings from Otter Box, Body Glove and Speck? Not a fan of any of them as I like the minimalist case.
Anything coming out soon???
spielnicht said:
Are there any cases for the Atrix aside from the offerings from Otter Box, Body Glove and Speck? Not a fan of any of them as I like the minimalist case.
Anything coming out soon???
Click to expand...
Click to collapse
I have the Speck and it doesnt really add any bulk. Why get a cheap case that will not really protect it from drops?
Yep, hit up Amazon and see for yourself, just search Atrix 2 case and see all the results you get.
my wife was looking for cases for her A2 that she'll be getting soon and there aren't as many cases as we hoped. Hopefully more will come, over time.
I got the TPU case on Amazon. Very happy. Especially for 9 bucks.
Too lazy to type again.
http://androidforums.com/motorola-atrix-2/437745-tpu-cases-up-amazon-prime.html#post3409131
http://www.amazon.com/Diztronic-Fle...s-Packaging/dp/B005Y3HJ52/ref=sr_1_12?ie=UTF8
Belt Clip
If anyone spots a belt clip let me know. I'm not going with a case with a clip (I've always had defenders) but rather just a belt clip. I can't believe I can't find one
i just got my tpu case in from the link above in matte black it is pretty awesome. it came with a screen protector that doesn't fit but it is better than nothing until i the one that i ordered in.
More about the case:
-so i said i ordered the matte black version of the case, and yes it is matte black but some of it is glossy. I actually like it this way because if you look at the screen, the edges of the case are glossy with blend in with the phone and if you flip it over it is matte black.
-it is a pretty snug fit and doesn't seem like it is going to move.
-almost all the buttons have a cut out except for the volume which i find a little strange because i would have liked it to be uniform, and there is a cutout for both of the microphones on the top and bottom.
overall for 9 bucks i am extremely happy with it and it even came a day early too!
Tpu case is awesome
Sent from my MB865 using Tapatalk
The tpu case is way too thin for me. I need bulk protection if I'm rolling with this for 20 months.
cheetablaze said:
The tpu case is way too thin for me. I need bulk protection if I'm rolling with this for 20 months.
Click to expand...
Click to collapse
you drop your phone that much?
kindacrazyazn said:
you drop your phone that much?
Click to expand...
Click to collapse
Yes, and it gets smacked around by my kids, and it gets brutalized at work.... Im also OCD. Any blemishes on my phone eats my soul on the inside
cheetablaze said:
Yes, and it gets smacked around by my kids, and it gets brutalized at work.... Im also OCD. Any blemishes on my phone eats my soul on the inside
Click to expand...
Click to collapse
i guess we all need different levels of protection for our phones. i am just not sure if i want a bulky case, that is just me personally.
kindacrazyazn said:
you drop your phone that much?
Click to expand...
Click to collapse
His location is an AFB (Air Force Base), so maybe so ;P
dasfiend said:
His location is an AFB (Air Force Base), so maybe so ;P
Click to expand...
Click to collapse
Lol I work with the cops on base. Something new happens over here every day
cheetablaze said:
Lol I work with the cops on base. Something new happens over here every day
Click to expand...
Click to collapse
Maybe you will have to throw your phone at someone and that is why you need a more protective case as well.
Clovett said:
If anyone spots a belt clip let me know. I'm not going with a case with a clip (I've always had defenders) but rather just a belt clip. I can't believe I can't find one
Click to expand...
Click to collapse
The Otterbox Defender has a clip. I can't offer any opinion on it though. I bought the Otterbox Commuter, which is not as heavy duty and doesn't have a clip. I like it, my only complaint is that the edges and corners attract a lot of lint.
kindacrazyazn said:
i just got my tpu case in from the link above in matte black it is pretty awesome. it came with a screen protector that doesn't fit but it is better than nothing until i the one that i ordered in.
More about the case:
-so i said i ordered the matte black version of the case, and yes it is matte black but some of it is glossy. I actually like it this way because if you look at the screen, the edges of the case are glossy with blend in with the phone and if you flip it over it is matte black.
-it is a pretty snug fit and doesn't seem like it is going to move.
-almost all the buttons have a cut out except for the volume which i find a little strange because i would have liked it to be uniform, and there is a cutout for both of the microphones on the top and bottom.
overall for 9 bucks i am extremely happy with it and it even came a day early too!
Click to expand...
Click to collapse
is it rubbery? does dust and lint stick to it? does it slide into and out of pockets easily?
svtfmook said:
is it rubbery? does dust and lint stick to it? does it slide into and out of pockets easily?
Click to expand...
Click to collapse
So i said that it is like two toned. the matte black part is really smooth actually. the glossy part is alittle stickier but i haven't had any problems with linkt sticking to the case. considering the size of the phone is does slip in and out of my pocket really well.
svtfmook said:
is it rubbery? does dust and lint stick to it? does it slide into and out of pockets easily?
Click to expand...
Click to collapse
I have the same case. Slides out of pockets smooth as silk. No lint problems. It doesn't have that "sticky" rubber feel too it like the otterbox stuff does.
You seriously won't find anything nicer for double the money. It's a great case. Looks like they've added "high gloss transparent" also now to the original matte black and smoke cases.
Ya I saw that too. I like the matte personally. If you want to see the phone itself then the transparent ones aren't too bad but might have a different feel to it. The matte feels smooth but alittle tacky too.
Sent from my MB865 using Tapatalk
Hi what do you think about this bumper?
http://www.ebay.com/itm/371175279735?_trksid=p2060778.m1438.l2649&var=640324100345&ssPageName=STRK%3AMEBIDX%3AIT
SUNUN said:
Hi what do you think about this bumper?
http://www.ebay.com/itm/371175279735?_trksid=p2060778.m1438.l2649&var=640324100345&ssPageName=STRK%3AMEBIDX%3AIT
Click to expand...
Click to collapse
I had that for the LG G3. I really liked it.
I always use bumper cases because it does not press on the back cover when I put Qi receivers, and also allow heat to escape from the back.
Is there anyone in here who used this Nillkin bumper case? Please tell us how it is...
I can't find it yet available in US, but it's all over ebay and amazon but coming from china...
I've got one on my phone right now, the grey one to be exact.
its nor what i'd call excessively bulky, but some people might complain over that, the screen is protected with the regular bump on the front part, its quite grippy as the back side remains accessible, the feel of the case is amazing, cutouts are perfect, materials are good, uses bumpy tpu-ish gel-ish plastic on the back and front size for the shock apsorbing, sides are made from strong plastic aswell. Buttons are easily accessible, very easy to press, but doesnt press when putting the phone in the pockets, didnt scratch the phone sides (yet) and its easy to remove even tho its a quite tight fit case.
the little backside rubber part make the phone stable on a flat surface, makes it stick a bit from the ground so the camera is protected. If you drop your phone directly on the back part on a non flat ground your camera will prolly be shattered.
Its my everyday case, would for sure recommend it (got it for about 8$ from ebay)
lemme know if you have any more questions :>
nolife1123 said:
I've got one on my phone right now, the grey one to be exact.
its nor what i'd call excessively bulky, but some people might complain over that, the screen is protected with the regular bump on the front part, its quite grippy as the back side remains accessible, the feel of the case is amazing, cutouts are perfect, materials are good, uses bumpy tpu-ish gel-ish plastic on the back and front size for the shock apsorbing, sides are made from strong plastic aswell. Buttons are easily accessible, very easy to press, but doesnt press when putting the phone in the pockets, didnt scratch the phone sides (yet) and its easy to remove even tho its a quite tight fit case.
the little backside rubber part make the phone stable on a flat surface, makes it stick a bit from the ground so the camera is protected. If you drop your phone directly on the back part on a non flat ground your camera will prolly be shattered.
Its my everyday case, would for sure recommend it (got it for about 8$ from ebay)
lemme know if you have any more questions :>
Click to expand...
Click to collapse
Thanks, the rubber at the front, is it loose or does it feel like it will loosen up in time? I have ordered one anyway because I like bumper cases. Thanks
xdm9mm said:
Thanks, the rubber at the front, is it loose or does it feel like it will loosen up in time? I have ordered one anyway because I like bumper cases. Thanks
Click to expand...
Click to collapse
Its very tight, it wont loosen as the side plastic holds it at place, its an unibody case tho, so the rubber wont separate from the plastic bit. But its quite good, disallows the specs of dust and sand to get in between the case and the metal bezels of the phone, overall i'm very satisfied with it on that area.
The grip is great, buttons work very well and it lets heat escape.
I own two spigen, uag and many cheap ones.
I prefer this one any day.
I bought the gray first. Loved it except the front part is gray.. I thought it was black like all the others with the colors on the back.
Anyway, a few weeks ago I bought the orange and I absolutely love it.
I like it so much. That I already bought the other two colors, red and blue.. ?
pedrad said:
The grip is great, buttons work very well and it lets heat escape.
I own two spigen, uag and many cheap ones.
I prefer this one any day.
I bought the gray first. Loved it except the front part is gray.. I thought it was black like all the others with the colors on the back.
Anyway, a few weeks ago I bought the orange and I absolutely love it.
I like it so much. That I already bought the other two colors, red and blue..
Click to expand...
Click to collapse
where did you buy them?
xdm9mm said:
where did you buy them?
Click to expand...
Click to collapse
I bought it from one of those china sites. Dx etc
I think it was aliexpress, not sure.
It's probably the same thing from ebay.
Many vendors selling the same thing.. Just pick one with good reviews
Good luck
pedrad said:
I bought it from one of those china sites. Dx etc
I think it was aliexpress, not sure.
It's probably the same thing from ebay.
Many vendors selling the same thing.. Just pick one with good reviews
Good luck
Click to expand...
Click to collapse
About 8.27$ on ebay, got mine for the aprox same price
Hi Guys,
Just want to post a review regarding a Full Protective Casing for our beloved Note 4. I got this casing through some seller. Not phone shops. Since I'm from Singapore, these kind of rugged and full protective cases are not available unless by ordering them through official website or Amazon.
Was surprised that there was a seller who's selling this here. Since it's a case that I've been aiming for, I decided to grab it rightaway.
The case itself is divided into 2 parts. The rubber and the hard plastic holding the screen protector. Putting it all together was quite snappy. I can say it's not too bulky or too small. Just nice.
Opening it up, it's nicely pack into a compact box. Also there'a a plastic covering the front and inside of the screen protector. No defects. I don't use the holster since it will be troublesome for me. Moving on.
Here is the link to the official site:
http://www.supcase.com/samsung-galaxy-note-4-unicorn-beetle-pro-protective-case.html
Here comes the review!!
The Pro's:
All ports covered. Including the S-Pen.
Only protector for screen. None on LED, Sensor, Front Speaker, Front Camera and Back Camera.
It's quite light if without holster.
Smooth and easy if kept in pocket. Not gonna be stuck like some cases if u try to keep and remove in n out from your pocket.
Volume, Power Button casing design is align well.
The Con's:
Fingerprint Scanning will be abit difficult as the case actually interfere with the button.
The port covers will be out of shape if continuously opened up.
Due to the smoothness of the case, it might just slip from your hands.
That are the ones that I noticed for now.
I attached 2 pics, front and back. Sorry for the lack of details and pics as I'm currently at work. LOL! Hope my review help for those who are looking to buy this case.
Here it is
Does this case scratch the metal chrome chamfered edges of the Note 4?
Does this Case work with the Samsung Wireless Charging Back Cover for the Note 4?
arjun90 said:
Does this case scratch the metal chrome chamfered edges of the Note 4?
Does this Case work with the Samsung Wireless Charging Back Cover for the Note 4?
Click to expand...
Click to collapse
I have a skinomi carbon fiber skin along the sides of my N4 and this case tore apart the skin on the side that I used to snap into the top piece of this case; as such, I believe it would be safe to assume that this case could scratch your phones metal edges. This case (for myself at least) was an extremely tight fit. As I have said in my supcase thread, this case is a really tight fit - if not too small.
I cannot say if the case will work with wireless charging, but I can assure you that your otterbox is much, much better than this supcase.
Super-thanks @JippleStar
I had installed Skinomi's Techskin last night on my Note 4 and the Otterbox Defender Series case did not accept my phone; was too resistant, and so I thought that I should stick with the Commuter for now without the Wireless Back Cover. I'll keep the Defender for back up and / or when I'm outdoors.
JippleStar said:
I have a skinomi carbon fiber skin along the sides of my N4 and this case tore apart the skin on the side that I used to snap into the top piece of this case; as such, I believe it would be safe to assume that this case could scratch your phones metal edges. This case (for myself at least) was an extremely tight fit. As I have said in my supcase thread, this case is a really tight fit - if not too small.
I cannot say if the case will work with wireless charging, but I can assure you that your otterbox is much, much better than this supcase.
Click to expand...
Click to collapse
---------- Post added at 08:27 PM ---------- Previous post was at 08:25 PM ----------
Its too bad the Skinomi Techskin does not include protection to the Chamfered edges. Neither do the other skins on the market. Bummer.
arjun90 said:
Super-thanks @JippleStar
I had installed Skinomi's Techskin last night on my Note 4 and the Otterbox Defender Series case did not accept my phone; was too resistant, and so I thought that I should stick with the Commuter for now without the Wireless Back Cover. I'll keep the Defender for back up and / or when I'm outdoors.
Click to expand...
Click to collapse
NP :good: I was very disappointed with this case and would never want anyone to go through that whole buy and return process, ya know? :silly:
I've never had so much trouble finding a case - or any other accessory though. I guess that's one of the downsides of having an extra large phone :laugh: & yeah, I would definitely keep the defender for days when you need that water-proof protection :good:
Microscratches on the Note 4's metal chamfered edges are unavoidable, even when applying the Otterbox cases, sad, but true. However, the way these phones were packaged, every Note 4 sold as new in its sealed box, has one or two scratches somewhere; I know this especially after unboxing close to a dozen Note 4's. First gapgate, then this. Lol.
Have to find a case once and for all, other-wise, we are only making our devices more susceptible.
Any solution for metal chamfered edges? I e-mailed Skinomi regarding this, and this was their response
"Hello,
Thank you for your email, and for your feedback. Unfortunately the item has been designed off the actual device here at the facility for the best results. However I will be more than glad to send your feedback to our design team.
Have a great day!
Best regards,
Skinomi Support"
JippleStar said:
NP :good: I was very disappointed with this case and would never want anyone to go through that whole buy and return process, ya know? :silly:
I've never had so much trouble finding a case - or any other accessory though. I guess that's one of the downsides of having an extra large phone :laugh: & yeah, I would definitely keep the defender for days when you need that water-proof protection :good:
Click to expand...
Click to collapse
arjun90 said:
Microscratches on the Note 4's metal chamfered edges are unavoidable, even when applying the Otterbox cases, sad, but true. However, the way these phones were packaged, every Note 4 sold as new in its sealed box, has one or two scratches somewhere; I know this especially after unboxing close to a dozen Note 4's. First gapgate, then this. Lol.
Have to find a case once and for all, other-wise, we are only making our devices more susceptible.
Any solution for metal chamfered edges? I e-mailed Skinomi regarding this, and this was their response
"Hello,
Thank you for your email, and for your feedback. Unfortunately the item has been designed off the actual device here at the facility for the best results. However I will be more than glad to send your feedback to our design team.
Have a great day!
Best regards,
Skinomi Support"
Click to expand...
Click to collapse
I second that. Lol! I'm just too tired to think about the metal edges of this beast. It's bound to be scratch sooner or later. Do not care about it that much. Care about the other surroundings instead.
I'm already thinking about the Note 5. Will be the first in line when that comes out.
slackerz_86 said:
I second that. Lol! I'm just too tired to think about the metal edges of this beast. It's bound to be scratch sooner or later. Do not care about it that much. Care about the other surroundings instead.
Click to expand...
Click to collapse
Just 2 days and i have one scratch over my case screen protector. Lol!!
slackerz_86 said:
Just 2 days and i have one scratch over my case screen protector. Lol!!
Click to expand...
Click to collapse
Unreal. I'm glad I didn't buy this one.
shawnpuerto said:
Unreal. I'm glad I didn't buy this one.
Click to expand...
Click to collapse
Well it happens to every rugged case. Especially if u have keys or coins in ur bag or pocket that u put your phone with. Same goes if u do not have a casing or cover for your phone. There will be scratches too.
slackerz_86 said:
Hi Guys,
Just want to post a review regarding a Full Protective Casing for our beloved Note 4. I got this casing through some seller. Not phone shops. Since I'm from Singapore, these kind of rugged and full protective cases are not available unless by ordering them through official website or Amazon.
Was surprised that there was a seller who's selling this here. Since it's a case that I've been aiming for, I decided to grab it rightaway.
The case itself is divided into 2 parts. The rubber and the hard plastic holding the screen protector. Putting it all together was quite snappy. I can say it's not too bulky or too small. Just nice.
Opening it up, it's nicely pack into a compact box. Also there'a a plastic covering the front and inside of the screen protector. No defects. I don't use the holster since it will be troublesome for me. Moving on.
Here is the link to the official site:
http://www.supcase.com/samsung-galaxy-note-4-unicorn-beetle-pro-protective-case.html
Here comes the review!!
The Pro's:
All ports covered. Including the S-Pen.
Only protector for screen. None on LED, Sensor, Front Speaker, Front Camera and Back Camera.
It's quite light if without holster.
Smooth and easy if kept in pocket. Not gonna be stuck like some cases if u try to keep and remove in n out from your pocket.
Volume, Power Button casing design is align well.
The Con's:
Fingerprint Scanning will be abit difficult as the case actually interfere with the button.
The port covers will be out of shape if continuously opened up.
Due to the smoothness of the case, it might just slip from your hands.
That are the ones that I noticed for now.
I attached 2 pics, front and back. Sorry for the lack of details and pics as I'm currently at work. LOL! Hope my review help for those who are looking to buy this case.
Click to expand...
Click to collapse
I too have the same Unicorn Beetle case- cheap alternative for Overpriced Defender ( otterbox )..but fingerprint scanning is difficult due to front of case jutting out, so your finger doesnt get a flat
area to run across. Holster is decent- but somewhat stiff. but for 20.00... 1/3 the price, I'm happy. Phone is protected.. until a better option comes around...with a holster.
E4gt007 said:
I too have the same Unicorn Beetle case- cheap alternative for Overpriced Defender ( otterbox )..but fingerprint scanning is difficult due to front of case jutting out, so your finger doesnt get a flat
area to run across. Holster is decent- but somewhat stiff. but for 20.00... 1/3 the price, I'm happy. Phone is protected.. until a better option comes around...with a holster.
Click to expand...
Click to collapse
I learnt a trick. U redo ur fingerprint scanning with the case on. U can do in any position and ways as long u do slow and steady. U'll find that it works better with the casing on rather than naked. For my N4, i just have to scan the top of my thumb and otz unlocked. Give a try. Just scan follow the flow of the casing design. From top till the casing.
Anyone know of a quality leather sleeve?
I used to be quite a fan of http://www.senacases.com/ , back with my original iphone 2G I had their slim leather pouch case.
Unfortunately, they don't have cases for the Moto X... However, you may want to check the phone's dimensions in comparison to other phones and maybe you can find one that still fits.
I've found that sleeves and cases for the Samsung Galaxy S5 are a good fit for the 2014 X. I bought one of these: http://www.amazon.com/gp/product/B00L1V9HW4/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 and it fits perfectly. Even snap-in flip cases work, but you have to modify the cutout for the X's volume buttons.
Depends on what kind of leather sleeves you like OP. I ordered one after a while of debating really... They have multiple colours here.
mdkath said:
Depends on what kind of leather sleeves you like OP. I ordered one after a while of debating really... They have multiple colours here.
Click to expand...
Click to collapse
These don't look like leather. I'd be interested in hearing your opinion on this one when yours arrives.
Solutions Etcetera said:
These don't look like leather. I'd be interested in hearing your opinion on this one when yours arrives.
Click to expand...
Click to collapse
Sorry....Well its more like synthetic leather I ordered this way back, here are some pics....I just got home so took some quick snaps.
mdkath said:
Sorry....Well its more like synthetic leather I ordered this way back
Click to expand...
Click to collapse
Thanks. How is the fit? What is the interior like? My biggest concern is that if dirt or sand is easily embedded in the lining, sliding the phone in an out of it could scratch the glass.
Solutions Etcetera said:
Thanks. How is the fit? What is the interior like? My biggest concern is that if dirt or sand is easily embedded in the lining, sliding the phone in an out of it could scratch the glass.
Click to expand...
Click to collapse
I can try to take pictures tonight with the phone inside. Need to borrow a second phone hehe.
Solutions Etcetera said:
Thanks. How is the fit? What is the interior like? My biggest concern is that if dirt or sand is easily embedded in the lining, sliding the phone in an out of it could scratch the glass.
Click to expand...
Click to collapse
So it's more like a soft cloth inside. I've always had a screen protector on all my phones using this (have used the same type of sleeve for other phones as well) so never thought of scratches.
I've been using the Snugg Galaxy S5 Pouch since October and put all my cards in the front. The picture with the card in the front is not the actual color, that's just the flash from the camera.
http://www.thesnugg.com/smartphone-cases/samsung/galaxy-s5/pouch/distressed-brown-pouch.aspx
I ended up getting one from saddleback leather. Its full grain, quality leather with a 100 year guarantee so I can't complain
The iPhone 6 fits perfect its a little tight at first but is great once it breaks in
My leather case
I have this one which I really like.
https://www.etsy.com/transaction/261889011
I'm looking at this seller on Etsy.
They do felt and leather. I actually really like the felt.