Out of the four cases I have tried for the Charge I think I finally found my favorite. The Trident Aegis has some problems as did all the cases I tried but it is the best. It comes in 5 colors and they look great. I got the blue one and it looks as good in person as it does on the site.
The materials used are very nice and the surface has a great anti-skid finish that provides great in hand grip. The hard plastic outer shell covers all 4 sides of the phone for a tight fit. It is thicker then the Otterbox Commuter at the phones curve at the bottom but I actually like that. It gives the phone a great feel when using it in landscape mode. Even though it is a bit bulky it does fit in pockets easily. The corners of the case are heavily padded for drop protection.
All of the ports are covered to prevent dust, moisture or any other unwanted substance getting into them. I found that the usb port was hard to open at times (I have no finger nails) and that the hdmi cover opens a little to easily. The power button and volume rocker are covered as well and easily accessible. One of the things I really like is the dust filter on the speaker opening. The speaker is loud and clear and will not be getting dust in it. The lip that goes around the screen is not as big as the Otterbox but provides just as good of protection.
The protection this case offers is great. Its not as heavy duty as the Otterbox Defender or the Trident Kracken II but it is good enough for every day use. It comes with a screen protector that I did not use. I would recommend this case without a doubt. While its not perfect its does correct the things that I did not like about the Otterbox Commuter and provides just as good of protection. If I can get access to a camera at some point I will post some pictures to go along with the review.
Thanks for all of the info. both here and via PM.
I want to hold out for the Kraken 2, but my Otterbox is driving me nuts so I might just grab an Aegis.
Rememo said:
I want to hold out for the Kraken 2, but my Otterbox is driving me nuts so I might just grab an Aegis.
Click to expand...
Click to collapse
The Kraken 2 looks pretty beast to be sure but I'm not sure if it's not just too think... Hows the thickness of it compared to the otterbox defender?
Rememo said:
Thanks for all of the info. both here and via PM.
I want to hold out for the Kraken 2, but my Otterbox is driving me nuts so I might just grab an Aegis.
Click to expand...
Click to collapse
What aren't you liking about the Otterbox? I asking because I'm thinking of picking one up for myself.
corys00 said:
What aren't you liking about the Otterbox? I asking because I'm thinking of picking one up for myself.
Click to expand...
Click to collapse
I'll second this...was thinking about doing the same. Otterbox no good?
Sent from my ADR6350 using XDA App
The top and the bottom edges of the Otterbox are not covered by the hard plastic so it is kind of loose. The buttons are also covered which I don't like and the hard plastic is kind of slippery.
corys00 said:
What aren't you liking about the Otterbox? I asking because I'm thinking of picking one up for myself.
Click to expand...
Click to collapse
I don't like how the top of the silicon portion isn't supported by the hard case, so it easily separates from the phone if you lift the phone by that area.
I also find that, while it's nice to slip in and out of your pocket, the hard case is too slippery for my tastes. It slides off of sloped surfaces and I've almost dropped the phone a few times now.
Personally, I like having the hard buttons covered, but the silicon that covers the buttons doesn't seem to fit tight against the screen, so debris can work its way underneath.
I never use the HDMI port, so not having it protected by silicon makes no sense to me.
Don't let my dislikes make it seem like it's a bad case, it's not, but I think the Aegis will fit me better. The Aegis should arrive tomorrow, so we shall see.
I'm thinking of making a short video to show the differences between the cases. I'll let you know when it's up.
Moondrius and Romemo,
Have either of you had the Incipio case before your trident case? I'm wondering how they compare. I'm surprised to see the trident case so slim since I always incorporate trident cases to be monsters.
I had the Incipio double cover and the Feather and both were sent back. The double cover was alright until I noticed it covered the hdmi port. It did seem thin and less bulky. The Aegis is the most bulky of the 3 but in a good way I would say. Its slightly thicker at the bottom. I would say I liked the Double Cover more then the Otterbox but I used it for like 5 minutes. The Feather was complete garbage. Its a shame because I really liked the Feather when I had my Atrix.
Thanks. I have the Incipio double cover. I really like it since I never use hdmi, not sure I can handle anything that would be bulkier.
Pics pl0x?
Sent from my Droid Charge running Humble 1.4
pics? link to site? something
dennis- said:
pics? link to site? something
Click to expand...
Click to collapse
For the Incipio case? It's here:
http://www.myincipio.com/Samsung-Dr...CRYLIC-Hard-Shell-Case-with-Silicone-Core.asp
Does verizon sell the Incipio case for the Charge? If so, how much do they ask for it? I really like the looks of the Incipio case and I am just trying to figure out if a covered HDMI port is worth it. I get 25% off accessories at Verizon so if the price is reasonable I wouldn't mind picking one up to try it out.
So I get my Charge on Monday. I have the cyclops series trident case for the fassy. It felt good. Overall I liked it. So I purchased the aegis. I bought it from the same ebay seller I got the fassy from: cyclopscase.
A good price too 23.33 with free shipping.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260822580193&ssPageName=STRK:MEWNX:IT
My dust cover for the hdmi port ripped off yesterday. I went to go use it and while pulling the tab off of the phone it just ripped right off. That tab is really flimsy and I used very little force around it.
moondrius said:
My dust cover for the hdmi port ripped off yesterday. I went to go use it and while pulling the tab off of the phone it just ripped right off. That tab is really flimsy and I used very little force around it.
Click to expand...
Click to collapse
Yikes... Yeah, that's a definite weak spot. I was thinking that, if I go back to my Aegis, I would just remove that cover.
Is it easy to take in and out of the case? I bought the media dock and the car dock, which leaves no room for a case. So I've been using the zagg shield that covers the entire phone. Problem is with the car dock, the sides have been tearing off due to putting the phone in and out of the dock. It's pretty useless, so I want a real case, but I don't want to buy a new car or media dock for it.
Does the Aegis come off and on pretty easily?
type_2 said:
Is it easy to take in and out of the case? I bought the media dock and the car dock, which leaves no room for a case. So I've been using the zagg shield that covers the entire phone. Problem is with the car dock, the sides have been tearing off due to putting the phone in and out of the dock. It's pretty useless, so I want a real case, but I don't want to buy a new car or media dock for it.
Does the Aegis come off and on pretty easily?
Click to expand...
Click to collapse
IMHO no. The hard outer shell is designed to be a reeeeally tight fit around the soft inside cover. As a current owner I wouldn't want to constantly take it off and put it back on for a car dock. Plus I think it would eventually wear on the buttons and dust covers.
emtee_skull said:
IMHO no. The hard outer shell is designed to be a reeeeally tight fit around the soft inside cover. As a current owner I wouldn't want to constantly take it off and put it back on for a car dock. Plus I think it would eventually wear on the buttons and dust covers.
Click to expand...
Click to collapse
Damn, thanks for the response. I guess I'll be running the sides of my phone naked with the Zagg shield on the front and back
Related
Hey guys,
Just bought the Incipio Feather case and wanted to share my thoughts in case some people were thinking about buying.
The case is definitely very light weight and pretty thin (Incipio states that it is less than 1 mm thin). It's an "ultra light, ultra strong polymer" hard case that is smooth to the touch while having a slightly rubbery feel to it. The case itself has very clean edges with no trace of any manufacturing defects. There are cutouts for the power and volume buttons, hdmi port (it's covered in the pictures on their site, but there is indeed a cutout for this), usb port, camera, microphone, headphone jack, and speakerphone. With the exception of the battery, everything is easily accessible through these cutouts.
As for protection, this is where I've been disappointed. First off, the side of the case does not rise above the side of the phone, so when you put the phone face down, the screen will be touching the surface (they provide a screen protector, but I don't think that's enough). Secondly, the case does not completely wrap around the phone, so both the top and, more importantly, the bottom of the phone are exposed. The bottom is important because on a straight drop, the pointed part of the phone will take all of the impact because it protrudes beyond the corner parts of the case. The top isn't as bad because it's flatter, so the corner portions of the case will ideally take the impact. Granted, you aren't purchasing a "feather" or "barely there" case for its protective qualities, but I think that had Incipio manufactured the case to fully wrap around the phone, both the protection and aesthetics of the case would have been enhanced.
In regards to the aesthetics, I purchased the case to avoid the bulkiness of other cases so that I could enjoy the look of the phone. However, the cutouts and the fact that the case doesn't fully wrap around the phone cause the Feather case to "break" the smooth lines of the phone. I would definitely prefer the look of a case that fully wraps around the phone.
Overall, I would not purchase this case again. At $25, even with the screen protector and microfiber cloth, I think that a case like the Androidified case that I previously reviewed provides better value with more protection. With the TPU case, my phone experienced no damage after I accidentally dropped the phone while getting out of a car. I can't say that the Feather case would provide the same sort of protection.
Thanks for the review, this was my favorite case when I had my Atrix. I noticed it on the site the day it went up but did not buy it because an employee confirmed over live chat that there was no hdmi cutout. Now that I know it is there I am placing an order now. I just bought the otterbox and I like it but its just too much for me.
This is almost the same exact case as this:
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&accessoryId=47557
But yours is probably a tiny bit thinner. And this one has a pull out stand which is awesome. They tried to sell this hardcore when i bought the phone, and I got it then.
Syn Ack said:
This is almost the same exact case as this:
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&accessoryId=47557
But yours is probably a tiny bit thinner. And this one has a pull out stand which is awesome. They tried to sell this hardcore when i bought the phone, and I got it then.
Click to expand...
Click to collapse
The Incipio also doesn't have those rubber ridges. I had one of these cases on my Thunderbolt and I hated it because I keep my phone in my pocket. Went with a Case-Mate Barely There case which seems to be similar to the Incipio.
It reminds me of an ultra light 1 piece Seidio innocase. It has a similar feel but its lighter and thinner.
After using this case for a few days I have to agree. This case is not worth it at all. The feather used to be my choice but incipio did not do well with this one.
I'm really hoping case-mate jumps on it and makes a barely there case for the Charge.
http://feedback.case-mate.com/forum...867323-samsung-droid-charge-barely-there-case
immaage said:
I'm really hoping case-mate jumps on it and makes a barely there case for the Charge.
http://feedback.case-mate.com/forum...867323-samsung-droid-charge-barely-there-case
Click to expand...
Click to collapse
Yeah same here. I went back to my Otterbox case but I just ordered the Trident Aegis today. I would rather have a thin light case but this feather is just plain terrible.
Why you going with Trident Aegis..instead of just using the Otterbox?
Just curious on your thoughts on the Otterbox..did you get the Trident? How is it?
The Otterbox is a good case but I am not too sold on having the buttons on the bottom covered. The Trident case shipped today and I will post pics and a review of the Aegis when it comes.
I saw reviews on the Casemate but not the Otterbox Commuter and I was wondering by experience which of the two are better and why?
I never tried the Otterbox but I do have the active Seidio vase and Casemate Tough. The casemate is one solid case. Protection all around and it feels great.
Anyone else have any more thoughts? I was going to post the exact same question until I used the feature to search
joogle said:
Anyone else have any more thoughts?
Click to expand...
Click to collapse
I have the Case Mate "Barely There" and I must say it is exactly what I expected.
Good protection for the phone back, sides & lower part. The upper part (at the power button) is less protected as you can see HERE but for me it will do.
The design is perfect, it fits like a glove; all case openings for camera lens & volume buttons are at the good location, see HERE & HERE!
Also, the cover is very thin (but still plastic so still better protection than rubber) so the design of my precious Sensation isn't ruined by it.
Finally, I'd suggest to use an original HTC screenprotector together with this case. Your phone will last for years that way. I tried an external party screenprotector but that was a waste of money because of the worse fit.
Hope this helped you a bit, as you asked for Otterman comments
I have both of the cases mentioned and i like them both. They both do there job. My only gripes are that with the otter-box case i have to fully disassemble the case to use my desktop dock. I have always been a fan of otter-box and have used there cases since owning my Hd2 and will continue to be partial to them for that reason, just wished there were a kickstand on the commuter series for the sensation when you buy it.
Thanks for the feedback, how are the usb ports on the otterbox and does the flap close well?
Basically between the two you would prefer the otterbox more?
thanks again
snoop101 said:
I have both of the cases mentioned and i like them both. They both do there job. My only gripes are that with the otter-box case i have to fully disassemble the case to use my desktop dock. I have always been a fan of otter-box and have used there cases since owning my Hd2 and will continue to be partial to them for that reason, just wished there were a kickstand on the commuter series for the sensation when you buy it.
Click to expand...
Click to collapse
Case mate tough case is better, otterbox seemed like cap and the silicone surrounding the phone was just bad
Sent from my HTC Sensation using Tapatalk
with my experience with the HTC Sensation Pop! Case is was ok. The silicone warped a little bit on the sides but it was very durable. Be careful when taking the phone out of this case because the silicone popped off the hard part of the case on the top.
are you referring to the case mate or otterbox?
skylinejay88 said:
with my experience with the HTC Sensation Pop! Case is was ok. The silicone warped a little bit on the sides but it was very durable. Be careful when taking the phone out of this case because the silicone popped off the hard part of the case on the top.
Click to expand...
Click to collapse
joogle said:
Thanks for the feedback, how are the usb ports on the otterbox and does the flap close well?
Basically between the two you would prefer the otterbox more?
thanks again
Click to expand...
Click to collapse
the usb ports function well, the flap closes alright a little hard to open and close and i have used case for about four months and the silicone surround is starting to wear a bit but this is because i remove my phone frequently to use with my desktop cradle. I like the design of the otterbox more it is more ergonomic in my book. Here the way i look at it for the money casemate is a just as logical choice as the otterbox. I prefer the otterbox just becasue i like there product and had never used a casemate before. So in my opinion otterbox.
ballistic
try the ballistic case, its awesome, and its cheaper than otterbox, i bought mine off ebay, it has a silicone plus a hard plastic cover on top of it, its very cool
I've got the Casemate Tough on mine. Had it since December, and it's a great case.
Nice and grippy in the hand, but won't stick in your pocket like the silicon ones can.
The only gripes I can have with it are that it's a pain to disassemble to pull the battery or the SD card, and it could do with being in a few different colours.
I always like bright cases on my phones (yellow is a particular fave) because I do a lot of fishing, and it's always easier to see something bright yellow if you drop it or put it down in a hurry!
I'd say it's worth the money.
For anyone who is up in the air between the top 2 rugged cases, the Kraken II is made much better for the Charge.
The belt clip on the holster for my Defender snapped the other day when it caught on the armrest of my chair so I went ahead and ordered a red Kraken II off of ebay since I had wanted to give one a try anyways. Got it today and everything about it is better. The holster holds the phone much more securely, the silicone is underneath the plastic so no more will it start coming off all the time like the Defender's did, and you can get it in colors . The level of dust protection is also a lot better thanks to mesh screens over the speaker and earpiece.
Hope this helps anyone deciding
Update 10/19!!!!
Forget everything I said above. I now hate Trident. Their plastic feels great and seems nice at first but is insanely cheap! A small piece next to the charger port broke off last night and this morning before I left for work I went to clip it onto my belt and when I went to squeeze the clip a little it snapped. Absolute junk. Thinking of just going to the standard Verizon case/holster combo and keeping it clipped inside my pocket at this point.
For what would you need such a case on this phone? I have dropped mine (naked) on concrete repeatedly with no harm (to the screen/internals).
I actually like the Defender better than the Kraken. I think it just looks better, sleek, and more stylish. The kraken does have color, but it looks cheap in my opinion. My family has the Defender case on all of our Droid Charge(s). No issues with them whatsoever. I just like having all around protection for my phone, although I have never dropped it (yet), I know it'll stay safe when I do.
I recently bought a Otterbox Defender Case. It definitley makes the phone much more bulky but I gues thats price for protection. I honestly am looking for reasons to take it off and put my old case back on but I fear that once I do I will drop my phone and it will shatter into a million pieces....hahaha. I n all honesty, it feels solid and indestructible now, my only complaint is its bulk and how lint kinda sticks to the rubber...I give it a 10/10 for purpose alone and a 7,8/10 in aestethics...
JihadSquad said:
For what would you need such a case on this phone? I have dropped mine (naked) on concrete repeatedly with no harm (to the screen/internals).
Click to expand...
Click to collapse
Mine dropped from ceiling level of a Lowe's retail building while up on power equipment once. Try that without one of these cases.
Also I would like to say that the way the belt holster is made on the Kraken saved my butt. I almost snapped it the first day I had it (in the exact same way I did the Defender holster) but the Kraken's holster is made with a detachable clip so instead of breaking it flew into 3 pieces that snapped right back together.
Shogun_Iggy said:
my only complaint is its bulk and how lint kinda sticks to the rubber......
Click to expand...
Click to collapse
All OtterBox cases do the lint thing & it drives me nuts. The Incipio does the same thing.
I finally settled on the BodyGlove as it gives an awesome grip on the phone & does not attract link AT ALL.
~John
updated first post. Forget everything, Trident is junk
Have you looked at the Otterbox Commuter for the charge?
Not as "industrial-strength" as the Defender, but extremely well made and it does a great job of protecting the phone while still leaving all buttons and slots/openings usab;e and/or easily accessible....
The holster is kinda important to me. Going to try the standard Verizon case/holster combo.
I am using the Verizon holster with a Casemate case. Works very well. Only thing I don't like about the holster is that the clip sticks up kind of high and will dig into your belly in certain positions. Might be a belly issue though LOL
I have Trident Kraken II case and I broke holster clip. Emailed Trident and they replaced clip within a couple days via mail.....good customer service.
Not sure which Otterbox case I have but this damn thing is tough as nails. I'm in the Army and this thing has taken a beating. I've dropped it out of a vehicle going 35 and nothing happened to it. Dropped it from about 10 feet up as well and nothing. I'll post pics as soon as I can so you guys know which one it is. I just know it's 3 pieces (2 plastic then the gummy like cover).
spc_hicks09 said:
Not sure which Otterbox case I have but this damn thing is tough as nails. I'm in the Army and this thing has taken a beating. I've dropped it out of a vehicle going 35 and nothing happened to it. Dropped it from about 10 feet up as well and nothing. I'll post pics as soon as I can so you guys know which one it is. I just know it's 3 pieces (2 plastic then the gummy like cover).
Click to expand...
Click to collapse
Sounds like the Defender. Built in solid screen protector right? The case itself rocks but the holster is too cheap.
yutzybrian said:
Sounds like the Defender. Built in solid screen protector right? The case itself rocks but the holster is too cheap.
Click to expand...
Click to collapse
No screen protector but it does have the holster. I need to get some pics uploaded because I have no idea which one it is lol.
I've not had any issues with the Trident case, itself, but I did have an issue with the belt clip breaking clear apart when I tried to take it off. Now I need to see if they offer any sort of warranty ala Otterbox...
Can you take the screen protector off the Kraken 2
Sent from my SCH-I510
juanzr1 said:
Can you take the screen protector off the Kraken 2
Sent from my SCH-I510
Click to expand...
Click to collapse
It's glued in from the back, you can just punch it out with a couple firm thumb presses before you put the phone in.
AshG said:
It's glued in from the back, you can just punch it out with a couple firm thumb presses before you put the phone in.
Click to expand...
Click to collapse
I would have got the Cyclops if I had knew that, went with the aegis thanks anyways
Sent from my SCH-I510
JihadSquad said:
For what would you need such a case on this phone? I have dropped mine (naked) on concrete repeatedly with no harm (to the
I was gonna say singeing similar. After repeatedly dropping my phone from chest height onto the floor with only minor superficial scratches to the plastic.
Pretty rugged phone.
Click to expand...
Click to collapse
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
galaxyhtc said:
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
Click to expand...
Click to collapse
the otterbox's rubber on its case looked low grade compared to the seidios and case mates. it looked like what trident was using..
i was looking into the naztech but i didnt like how there is a bar on the top of the screen lol. id like to see a review on it. might get the case mate pop
If it helps your decision I had one otterbox which I had to have replaced thru otterbox due to silicone stretches and the phone will actually slide up and down in the case. had the replacement for about a month and just took off the second one today due to complaints of me sounding muffled and any back to the old dependable tpu case even though it is a ***** to get out my pocket and attracts lint it is my fave
Sent from my HTC Pyramid using xda premium
fireishott said:
If it helps your decision I had one otterbox which I had to have replaced thru otterbox due to silicone stretches and the phone will actually slide up and down in the case. had the replacement for about a month and just took off the second one today due to complaints of me sounding muffled and any back to the old dependable tpu case even though it is a ***** to get out my pocket and attracts lint it is my fave
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
yeah.. and if you watch the video reviews on it they didnt seem to pleased either lol. im dispointed in otterbox for this case.
Thanks for the info, i don't know though, was the otterbox easy to get in/out of your pocket.
galaxyhtc said:
Thanks for the info, i don't know though, was the otterbox easy to get in/out of your pocket.
Click to expand...
Click to collapse
Yeah it was super easy due to the hard plastic that covered the silicone layer that is one thin I miss about it and am still on the fence about putting it back on. I will say my phone survived a few high drops ( I am a cable tech and it fell from a ladder about 18 feet to concrete with out a scratch)
Sent From My HTC Sensation 4G powered by Sense-O-Matic
Wow, you just made my decision harder.... !!! Haha thanks though, i'm sure i can't go wrong with either of these cases, but I just want to know which is the best.
OK, I'm pretty sure that the Tough Case and Vertex are out:
Tough Case: I saw that the rubber wraps around the screen on the phone, and can attach lint, also, it does seem a bit bulky.
Vertex: Lack of information is difficult. From the pics I don't think it'll work out for me.
Personally I use zagg skins now. They are seriously epic. I have always hated all phone cases because of the bulk they add no matter how thin. But the zagg skins are tough...real tough. And add essentially no weight/thickness to the device. When I got mine i was trying to scratch the back and screen to no avail. zagg also offers a lifetime warranty, but I have no idea what their limits are on it. Plus you can customize it with any picture you want.
Just my opinion. Good luck with your choice.
I have both Case Mate POP and Otterbox Commuter... otterbox has far better plastic because it cant get scratched at all. The case mate pop looks like it's 10 years old after a week. Still I user POP rather than the otterbox because the rubber on otterbox is like a MAGNET for all the dirt that is around you. I used to clean the rubber, and put it in my pocket, and when I get it out it's entirely covered with dust... I don't even know what were they thinking when they were making it. Another thing about the otterbox is that the earphone jack cover never fits like it is supposed to.
I ordered this a week ago because it looks funny
http://www.case-mate.com/HTC-Sensat...-Sensation-Sensation-SE-Tut-Silicone-Case.asp
I will order the case mate tough also... I hope that will be what I want at last
Wow, thanks for the info! So which one of those has a thinner/less bulky form factor, and is easier to get in/out of your pocket?
Case
I bought a Yoobao case off of Ebay, I love it. It is very tough and thin holds the phone tight.
Ehh, thanks for the info, but I already have a TPU and while it is nice and slim, I want something with a little more protection.
I'll put my two cents in, I just got the vertex and I'm very impressed. I've had the commuter and didn't like it. The plastic seemed cheap to me and was too slick. I also had a tpu case that was ok but I didn't think it would protect very well and made the power difficult to press. The vertex is quality, looks and feels very nice and fits great.
Sent from my NookColor using xda premium
Hi, thanks for the input! Does the back material make it easy to get in & out of pockets easily? And also, is it thinner than your otterbox?
galaxyhtc said:
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
Click to expand...
Click to collapse
Haven't tried the Case Mates yet, nor the Seidio, BUT:
Naztech is a POS - crappy build, plain & simple.
Otterbox's silicone is too damn loose - quoting others here.
Just saying......
Well, I've been on these forums reading for about 5 months now, but this is my first post...
I've had the Casemate Tough Case for the same amount of time I've had my Sensation; about 5 months.
The tough case's hard backing makes it very easy to slip in and out of your pocket. The only exposed rubber is a small section at the top and bottom of the phone and a very thin rim around the screen, the rest is the hard plastic. I never notice that it's collecting lint\dirt, except when I remove the case, there is a small rim of dust collected under the rubber rim, but you can't see it until the case is off.
The exposed rubber parts always look clean and smooth, same goes for the hard plastic outer shell.
The farthest I've dropped my phone with the case on is off the bar... so maybe 4 feet or so? No damage to the phone or the case.
I haven't tried out any other smartphone cases, so I don't have a large frame of reference, but I haven't had a single issue with the tough case. Hope this helps!
master1454 said:
Haven't tried the Case Mates yet, nor the Seidio, BUT:
Naztech is a POS - crappy build, plain & simple.
Otterbox's silicone is too damn loose - quoting others here.
Just saying......
Click to expand...
Click to collapse
Have you actually tried the naztech case? I'm sitting here right now literally starting at it trying to find a problem with something and I can't. I can't compare it with the tough case but its better than the otter.
Like I said before, and I don't know if this even matters, the naztech has cut outs for all the holes on the back cover, none of the other two piece cases have that feature.
As far as the plastic, the naztech has a rubberized back which makes it easier to hold than the otter but still slides into a my pocket easy.
i think you guys should check momax case....
For what it's worth...
I picked up one of these on Amazon:
http://www.amazon.com/gp/product/B0055DHCKS/ref=oh_o00_s00_i00_details
Inexpensive, fits very well, easy to slip on and off, isn't a lint magnet, reminds me of the great Boxwave slip cover I had on my Nexus One.
Highly recommended.
I'm looking for a replacement for my Otterbox Defender, I'm not very happy with it at all. The outer silicone layer is falling off my case because its becoming too loose, and the hard inner part is cracked to hell and back. And I've only had the case since September and hasn't had any major falls!
So I'm looking into the Kraken case, and from what the website says, it has a built-in screen protector, but on the actual page where you buy it is a self-applicable screen protector. So I was just looking for some feedback and actual answers? Which is it? And is the case any good?
Or are there other suggestions for a rugged case?
I myself returned it. The case is very heavy, the plastic feels cheap, and its not smooth so you feel all these bumps etc in your hand. It doesnt lock into the belt clip easy enough to actually be useable. I have a belt on my pants and the thing was so heavy that it pulled my pants down a good 2 inches. The screen protector is also one you have to put on it there is no built in one. I would email otterbox, they have replaced my stuff several times, all they did was ask me for a about date i bought it, and asked me for a picture of the damaged case all i had to do was write the date on piece of paper and include it in the picture and they sent me new one within like maybe a week to two weeks at no cost.
I would really recommend the Ballistic SG. it's under 19$, but is superb. The best part is the buttons remain perfectly usable.
Do pair it with a wet application screen protector, but the design should generally prevent any part of the screen impacting any surface.
Sent from my One X using xda premium
I'll 2nd the Ballistic SG. Had it since June and still love it. The only car dock I liked was the ibolt, but the phone wouldn't fit with the case on, so I had to mod the ibolt with a Dremel to make it fit. This case would be perfect if it had a compatible car and desk dock accessory option.
i wouldnt really say ballastic is what this person is looking for to me its like mid range protection id assume they ment same level as otterbox and the ballastic gels lip is not anywheres as big as the one on the otterbox so , ans skin to me is kinda thin id just email otterbox ask for replacement.
I've gone through two replacements for my Defender since I first posted. Sure Otterbox has had no problem sending them to me free of charge. But this is ridiculous. Its just not sturdy enough. It feels like cheap plastic.
I've also looked into the Ballistic cases. But the one I really want they don't make for my phone. Sad day.
i honestly cant find anything i like for one x i wish i didnt get this thing im trying to trade it out. but im using generic ballastics case. it does job not as cheapy feeling but the rubber does leave some like smudges on back of my phone if u find anything let me know.
sandys1 said:
I would really recommend the Ballistic SG. it's under 19$, but is superb. The best part is the buttons remain perfectly usable.
Do pair it with a wet application screen protector, but the design should generally prevent any part of the screen impacting any surface.
Sent from my One X using xda premium
Click to expand...
Click to collapse
Indeed. These things are great. They've gone up in price a bit, but are still really worth it. The rubber part never stretches out because of the plastic and ballistic that goes around it sort of keeps it nice and tight on your phone. Definitely worth getting.