Database Info

Seidio Case/Holster for Nexus One @ local Best Buy for $10

I was at my local Best Buy today looking at phone accessories when I came across this case and holster for the Nexus One. As I looked closer at it, it looked very similar to the Seidio case and holster, only it was branded Platinum. Upon further inspection, I noticed on the bottom of the packaging in small letters that it was indeed a Seidio product. What really surprised me though was that it was only $10, instead of $35 like the other cases and holsters around it, so I snatched it up right then and there.
Since all the other Platinum brand case/holster were still full price, I can only assume that they are discontinuing this in the stores. I looked on their website and it's still listed for $35. So if you've been looking to get this case and holster, I'd suggest you hit your local Best Buy and hope they still have them in stock before their gone.

I got the same one from the local best buy by me. Solid case and holster for $10. Well made and has all the needed openings for microphones, ports, ect. Phone fits face in or face out in the holster.
Appears to be a rebranded Siedo Innocase™ II Surface Combo - Black which retails for $50 on the Siedo website.
Only problem is (like other cases) you have to remove it to fit it into the desk/car dock. Still a good value.

I picked one up yesterday and tried to put it on. First off, as I was sliding the top part in slowly, it took the screen protector off with it on the upper left side. Then the rubbery material on the inside of the case peeled off as well. I had to replace the screen protector. I took it back today to exchange it. I got it on this time, but again, the upper left side of my screen protector began bubbling really badly so I took it off immediately. Now, my screen protector has these scratch lines where the case overlaps the screen and glides on when sliding on the phone. I'm glad I had a screen protector on or else the case might've scratched my actual screen. I've always had a problem with the seidio case and I was hoping this one would be different, but its not.

bskim23 said:
I picked one up yesterday and tried to put it on. First off, as I was sliding the top part in slowly, it took the screen protector off with it on the upper left side. Then the rubbery material on the inside of the case peeled off as well. I had to replace the screen protector. I took it back today to exchange it. I got it on this time, but again, the upper left side of my screen protector began bubbling really badly so I took it off immediately. Now, my screen protector has these scratch lines where the case overlaps the screen and glides on when sliding on the phone. I'm glad I had a screen protector on or else the case might've scratched my actual screen. I've always had a problem with the seidio case and I was hoping this one would be different, but its not.
Click to expand...
Click to collapse
I don't use a screen protector myself, I've had the case on and off a handful of times since I got it and it doesn't appear to be scratching the screen. I do agree though that the little rubber pieces on the inside do tend to move around a bit, but I've found that if you squeeze the case in as you slide it onto and off the phone, it minimizes the chances of the rubber moving.
Overall, I've always been very happy with Seidio's holster clips, but have to have a case on my phone cause I've very tough on phones, so I'd say the Innocase is perfect.
Now I just need to rig up a way to use the phone in the official car and home dock without having to remove the phone from the case. Gonna have to whip out the Dremel tool, soldering iron and some wood. If I get really ambitious, I may even cast some plastic molds of the phone.

Thanks for the heads up on the case. I went to my local best buy and they did not have it on display. I had to ask one of the cellphone associates to get it for me out of the back. Their SKU is: 9943421 for $9.99 regular price $34.99.
I've been using the Case-Mate tough case exclusively since I purchased the phone in March. All I can say is I'm amazed at how thin this case is. It feels as if there really is no cover on the phone. The addition of a secure belt clip is a HUGE plus in my book. My only gripe so far is I don't think this case will do much good in protecting the phone from a drop out of your pocket or coat.

Funny you should say that, I too just switched from the Tough Case as well. I did love the CM case for the combination of shock absorbing rubber and hard plastic shell, but it made the phone too bulky. As for the Seidio, it may be thin and not offer as much protection as the CM case, but take into account that the shell of the phone itself is metal and hard plastic and comes into direct contact with the screen. Any drop is going to transfer from the shell and into the screen most likely causing it to break. A case on the phone, even a thin one, is still more flexible than the phones shell and absorb most impacts. Even if the case itself breaks in a fall, better a $10/$35 case then a $579 phone.

garfnodie said:
Funny you should say that, I too just switched from the Tough Case as well. I did love the CM case for the combination of shock absorbing rubber and hard plastic shell, but it made the phone too bulky. As for the Seidio, it may be thin and not offer as much protection as the CM case, but take into account that the shell of the phone itself is metal and hard plastic and comes into direct contact with the screen. Any drop is going to transfer from the shell and into the screen most likely causing it to break. A case on the phone, even a thin one, is still more flexible than the phones shell and absorb most impacts. Even if the case itself breaks in a fall, better a $10/$35 case then a $579 phone.
Click to expand...
Click to collapse
After a few hours of using it, I switched back to my tough case. I just can't get over how "under protected" the phone feels. I did however use the Seido case when I had to wear a suit earlier this week. I like having my phone on my belt in those cases. For 10$ its a nice option to have.
Now if there was only a way to get the Seido holder to hold the n1 with the tough case on it.....

No joy at my local best buy - but I found an open-package one on Ebay for $7.99 with free shipping - same item.
Open package is no big deal to me though...
Thanks for opening my eyes to this product!

just got this as my seido case was getting really messed up.
the only difference i see is that the inside is rubber rather than seido's felt interior

krazichinaman said:
After a few hours of using it, I switched back to my tough case. I just can't get over how "under protected" the phone feels. I did however use the Seido case when I had to wear a suit earlier this week. I like having my phone on my belt in those cases. For 10$ its a nice option to have.
Now if there was only a way to get the Seido holder to hold the n1 with the tough case on it.....
Click to expand...
Click to collapse
Sound's to me like what you need is the Seidio rugged case. It's similar to the Tough case in that you get a thick rubber wrap with a plastic shell around it, and then that fit's into a special spring holster.
http://www.seidioonline.com/product-p/bd4-hkr4hnx1.htm
I'm sticking with the regular case/holster as that will more than protect the phone from even a tall drop.

OtterBox Defender & Commuter Series Case

Otterbox cases are some of the best protection that you can get for your smartphone. There are three available for the Galaxy S6 and coming soon for the Galaxy S6 Edge ( Sign up Here to Be Notified ) You can get more customization though the OtterBox site. There is also Free Shipping on all cases within the US.
OtterBox COMMUTER SERIES:
OtterBox DEFENDER SERIES:
OtterBox SYMMETRY SERIES:
To get a idea of what these cases look like on the GS6, then view the reviews here:
(OtterBox Commuter Series:
(OtterBox Defender Series:

Bump

I'll chime in with this:

felloffthetruck said:
I'll chime in with this:
Click to expand...
Click to collapse
You have the same exact color option that I have.

Been rocking the Otterbox Commuter case since I first got my phone. It's a nice case. Since I carry my phone in my pocket, dust covers were a must. You should see the ports on my old Nexus 4, lol. I didn't want the defender as it is too bulky, so the Commuter was perfect. The dust covers are great and the case leave you enough room for a screen protector. I did just get the standard tempored glass protector from Verizon, but if all protectors are created equal, then you won't have a problem. The bottom of the case does just barely touch the protector. If you have a protector any bigger, the lip of the case will cover or push up against it. I do have one or two gripes with it, though...
It wants to slip out of your hand and is a tiny bit of a pain if you want to take the case off and put it back on. I think if the lines on the edge of the hard part of the case were horizontal instead of vertical, the case would have a better grip and not want to slide out of your hand. With the grooves being vertical, they case just glides right out of your hand.
I often have to take my phone out of the case because I run, so I have an armband that I put my phone in (having to switch cases like this is also why I got the Commuter and not the Defender...easier to take the case off and i'm sure the Defender case will eventually break from constantly having to take it apart). If you take your phone out of the case and you need to put it back, there's a certain way you have to do it. Put on the soft cover first. After that, you need to put on the hard cover on starting at the bottom. Sit the phone down into the bottom part and then pull the dust covers through the cut outs and then drop the phone the rest of the way into the hard cover. From there, the rest of the hard cover part pops right over the rest of it very easily. It's a little tricky at first, but over time, i'm sure you'll get the hang of it.
Overall, I like this case.

Not happy with Defender failure
blackout720 said:
Bump
Click to expand...
Click to collapse
I suggest no one buy the Defender for the S6 until they show they have fixed the plastic housing, the holster, or both.
The housing on mine has a broken latch after only 2 weeks of use. The Defender for my old S4 last 2 years and still works fine.
The new housing has a smaller perimeter around the latching slot for the holster. Also, the holster tab is now two little nibs, as compared to a solid tab on the S4 design.
The smaller interface area combined with the thinner material on the housing caused mine to break easily. Now the phone wont stay in the holster unless I turn it around to use the unbroken side. I know that side will be breaking soon as well.
To top it off.....Otterbox's website wants me to give them a credit card so they can charge me $ 6.99 for handling the issue.
I am pretty disappointed in the new Otterbox. Am looking for an alternative since the design is poor and the return policy on such a premium product is less than "premium" in my eyes.

What case do you use on Nexus 6P?

Hey guys. I just decided to try Nexus 6P. Looking for some great cases to protect it! But also I don't wanna spoil the original look of it since the design's so unique and beautiful!Just got two clear cases for my former Nexus 6 from AMZ and looks wonderful, yet the clear case get darken yellowed after few weeks using, so just share your N6P case experience here and enjoy!

Long response incoming:
I initially bought a official microfibre Adopted case (in carbon) from Google along with my N6P (aluminium). I paid full price for it, but I thought it was worth the premium for an official case and the design was cool and unique. Massively underwhelmed when I received it, because it's nothing more than a generic TPU case with a thin "sticker" of microfibre on the back, which I sensed would be prone to staining and, over time, peeling. The fit was also really tight and button presses weren't that responsive. I decided in the end that the Nexus branding wasn't worth the premium, so I returned it.
I then ordered a charcoal Diztronic case. I've had good experiences with Diztronic in the past, having used their case on my Galaxy Nexus as a daily driver. It was cheaper than the Spigen Rugged Armor and I appreciated the minimalist aesthetic, not being a fan of the faux carbon fibre pattern on the Spigen. The fit and finish was great, and the buttons were clicky and responsive. My only minor niggle was the cutout for the camera sensor wasn't completely accurate, as it cut off part of the circle surrounding the sensor (100% an aesthetic oversight with no impact on function).
I then bought a Speck Candyshell Grip (in white) during the Black Friday sale, when it was 50% off. Definitely my favourite case of the three I've tested so far. It provides the most protection (being a dual-layer silicone and polycarbonate hybrid), looks striking, and, as the name implies, provides a ton of grip.
I've had a Speck Candyshell on my iPod touch and over 4 years later, it's still kept my iPod in perfect condition. The case itself is scratched up and turned a bit off-white, but I haven't exactly been gentle with it (having taken it traveling and camping) so I'm confident in its protective capabilities.
I'll likely be rocking the Speck case as my daily driver for the time being, and I'll only swap back to the Diztronic when I want a more toned-down look and slimmer profile (maybe if I'm at a fancy event wearing slacks).
Finally, I also pre-ordered a white Crash Guard + Project S from Evolutive Labs when they offered 25% off the first 50 pre-orders. IMO this would be the solution to preserving the Nexus's original design and aesthetics, while still providing a lot of protection (if the demo videos are any indication). I have no idea what Project S is, though (hopefully some kind of transparent skin, though they said it wasn't going to be made of the same material as the Rhino Shield).
I have a tempered glass screen protector from intelliARMOR protecting the front (second generation/first revision, the model prior to production of the two distinct "case-friendly" and "edge to edge" versions). It's been fine with both the Diztronic and Speck cases, though I'm curious as to whether the edge-to-edge versions might also be compatible with the Speck and Crash Guard, as there's just 1 mm between the edges of the cases and screen protector, where I find dust and grease can get trapped in between.
If you're looking for clear cases, there're Spigen's Ultra Hybrid and Neo Hybrid EX cases. The Ultra Hybrid is a single-layer case with a clear polycarbonate back framed by TPU along the edges. I wouldn't recommend it personally because I've heard that clear TPU will stain over time (as likely what happened to your original case), and the visor is completely exposed and thus prone to scratches.
The Neo Hybrid EX consists of 2 pieces: a clear TPU shell and a coloured polycarbonate bumper (essentially, the reverse of the Ultra Hybrid). It looks to be the best clear case I've seen in terms of protection (as the visor is actually covered), but I don't know how the clear TPU will fare over time, whether it will also be prone to staining. I'd wait on reviews for this case before ordering, and for it to be listed on Spigen's Amazon store, which will likely be cheaper than buying it off their main website or eBay store.

To be honest it's the first device that I don't have a case for it although I have a tampered glass and a pouch. But I'm waiting for some skins from dbrand and a wooden skin from toastmade.
Tapatalked with my Nexus 6P

I got the carbon cloth backed Nexus 6P case originally and I really like the look and feel of it, but it's not the most protective. The only issue I've had with it is taking screenshots (the case presses buttons you don't mean to) and it wouldn't work with a tempered glass screen protector (it peels it up).
On the black Friday I got the Speck CandyShell in black/slate and I'm digging it. It's more protective and it makes the button presses a little harder, which I like. I would think it'd work with a glass screen protector as the bezels don't intrude onto the glass very much.

I use a Supcase Unicorn Beetle Hybrid as my standard case. I usually slide it in my pants or jacket pocket. I do wish there was a belt clip for the Beetle Hybrid, but to get a belt clip case combo you typically are into something much thicker and substantial that is, for me, unnecessary. When I'm wearing a suit, I use it bare and carry it in a Story Leather belt clip holster made for the iPhone 6s Plus. The phone has a Skinomi Tech Glass protector on it.

My experience mirrors LuckyDragan a little bit.
My first case was the microfiber case from the Google store. While it looked nice and the in hand feel was decent, I felt it cost way too much for what it was. I ended up returning it because when I pressed the edge of the case by the buttons it would change the volume. Not cool for a $35 case.
Next case is the reg. Adopted case. It's not bad. I really like the textured sides. It's also fairly narrow. Thing is, I paid $10 for it, at the reg. price of $20, I'm not sure if it's worth it. By the pics I've seen, I think it looks better than the Diztronic, especially the fingerprint cut out.
3rd case is the Spigen Rugged Armor. Except for the camera cut out (I don't like how it doesn't leave room for the blueish oval), I think it looks the best of all the cases I've tried so far. My nags are that It's all little wide and slippery. At $13.00?, it's a good buy.
4th case is the Speck Grip. My favorite so far. It's not as thin as the other cases but not bulky. The grip is awesome, no problem using the phone with one hand. At first glance, I didn't think it was the best looking case, but it's starting to grow on me. The protection and how it makes the phone so much easier to handle makes it a winner. @ $20 I paid during the Google store's sale, I think it's worth it. @ the reg. price of $40, idk.
If haven't yet, check out Pilz review thread, so much good info.

White Speck case as my daily driver.
I have tried the Diztronic one, while it does provide protection, did not like how loose the edges felt, definitely not as snug and stiff as my Diztronic Ultra that is on my GS6. It easily bent out edges for my taste, and thought of getting some debris that could scratch up the phone was bugging me somewhat. If you need a very minimalist, fingerprint resistant, and decent lip for screen protection, that is the case to have.
Also have the Supcase Unicorn Hybrid Ultra. great case, snug and firmer edges than the Diztronic one, but damn, is that case slippery. I have a habit of placing the phone on my car seat, and that thing just slides around like a hockey puck on ice when placed on its back. Placing it face down did help... still preferred it over the Diztronic.
But snagged the White Speck Candy Shell Grip case at 50% off, love it. Excellent grip, very tight and solid felling edges, does not slide when placed on a my car seat. Wished they offered a matt finish white version of this, since I am not a fan of shiny cases, but the black rubber lines offset it enough to be likable for me. Sporting the Orzly TGSP,with that case there is a minimal space between the glass and the edges of the case, nearly perfect sealed fit. Hoping the intelliglass ones are a bit more of an coverage so that it could have a near gapless glass to case seal, still waiting on receiving mine...

Currently have the Tudia case which is brill, but also got the Spigen rugged case coming.

Official microfiber case in carbon. No screenshot issues or button issues in general. I love the soft fabric feel. Feels more "welcoming" than the cold, hard plastic/TPU of other cases I've used. Regarding durability, I'm a little concerned, but only time will tell how the microfiber will hold up.

Smoked Ringke fusion is my case of choice, at least for now. I also have the Orzly flexicase and Spigen rugged armor. Don't really care for either of those.
Anyone want to trade a case for the spigen rugged armor? mint condition and hasn't been used other than trying it on once.

PuffinNugz said:
Smoked Ringke fusion is my case of choice, at least for now.
Click to expand...
Click to collapse
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.

I use spigen rugged armor, it's a good case that offers high protection to your phone..
i intend to order the verus high pro shield case though, just want to wait for some time until they fully supply the updated case.. the first batches had a defect about the charging port..

InfestedAdam said:
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
Click to expand...
Click to collapse
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g

PuffinNugz said:
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
Click to expand...
Click to collapse
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.

InfestedAdam said:
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
Click to expand...
Click to collapse
Yeah, not sure about amazon, but I bought mine from that ebay link. Pretty sure they are the actual sellers.

The Spigen rugged arrived today and it is SOOOO much nicer than the Tudia one. Better fit and feels nicer and more secure.
Sent from my Nexus 6P using Tapatalk

I've had a few cases so far.
SR Tech - Typical TPU case. Decent protection. Cutouts were slightly off. Total fingerprint/oil magnet. Got real slippery after a week or so of use and required a wipe down. Did not interfere with my Pleson TGSP.
Spigen Rugged Armor - Soft touch finish felt really good in hand. Very good protection at the sacrifice of some added bulk. Cutouts were precise and buttons had a nice tactile feel. Soft touch got some smudges on it occasionally but not nearly as bad as the SR case. Did not interfere with my Pleson TGSP but it was really close.
Spigen Thin Fit - Very interesting finish on this case. Kinda felt like the back of the Nexus 6. Fingerprints weren't really a problem but oil/smudging was. Case snapped on snugly and provided good protection for the covered areas. Top and bottom of the phone were exposed. Did not interfere with my Pleson TGSP.
Nillkin Nature - This is my daily driver. Pretty much the same as the SR Tech, only about half the thickness. Cutouts are more precise and there is a cover for the Type C port, which I really like. This is literally the thinnest case I've ever used and it really helps make the already large 6P more manageable in the hand. I wish it came in a matte finish so oil/fingerprints weren't so much of an issue, but other than that I'm happy.

Adopted for now until bumpers start arriving and be reviewed.

Ringke smoke and Google Microfiber. Like both and switch weekely
Sent from my Nexus 6P using Tapatalk

I switch from the official google carbon case and spigen ultra hybrid. They are great cases but the buttons on both aren't the best. I also have speck case but I use it for when I go to the gym. Diztronic case is nice but phone feels loose inside and verus case.. Its whatever.
Sent from my Nexus 6 using Tapatalk

Review: MoKo [Heavy Duty] case for Nexus 6P Huawei

Hi guys,
I finally got around to doing a review on the Moko Heavy Duty Case for my 6P. I ordered this on amazon.ca. I've rocked this case for about a week now since I did that video, and I am pleasantly surprised.
The cutouts are precise, and the case does not look or feel cheap. The fingerprint scanner is easy to use still as well. The plastic is pretty soft, and I don't think it would stay on on its own without the black shell, but it does fit perfectly. Also, didn't notice much pocket lint or anything else sticking to it like some have reported. Overall it's a great option for a more rugged case for the Nexus 6P, especially here in Canada, where the options can be sparse. Here's the link from amazon.
Nexus 6P Case - MoKo [Heavy Duty] Full Body Rugged Holster Cover with Swivel Belt Clip - Dual Layer Shock Resistant for Huawei Google Nexus 6P 5.7 Inch Smartphone 2015, PURPLE https://www.amazon.ca/dp/B00JP6J1A0/ref=cm_sw_r_other_awd_HnYMwbXKYG11S
11 bucks plus tax, and since I have PRIME, also got free 2 day shipping. Yes, I have a compulsive online shopping problem...
I will also post reviews for my Spigen Rugged Armour and a Poetic Revolution cases shortly.
https://youtu.be/k2k6gPdRPUY
Sent from my Nexus 6P using Tapatalk

I've got one in blue but I don't use it anymore. It's a pretty nice case and the quality is fantastic I just wish they would stop putting those huge bumps on the back for no reason. They serve absolutely no purpose and double the thickness of the phone. They do this on these cases for all phones and just still makes no sense.

RED ZMAN said:
[...] I just wish they would stop putting those huge bumps on the back for no reason. [...]
Click to expand...
Click to collapse
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)

daniels220 said:
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
Click to expand...
Click to collapse
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?

RED ZMAN said:
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
Click to expand...
Click to collapse
I have the black version. Based on the pictures on Amazon the colors looked like they'd be pretty in-your-face, especially since the highlight color is visible directly around the edges of the screen. I'm afraid I don't have any holsters—I've never used one.
I realize, I forgot to mention the most important thing! The headphone and USB-C cutouts on this case, as shipped, are not large enough for most cables. The stock USB-C cable fits but scuffs the sides, many high-quality third-party cables won't, and the only headphone plugs that will fit are the super-tiny ones that some headphones have for exactly this reason. But! If you have a decent utility knife, some courage, and a steady hand, it's possible to enlarge the cutouts without messing up the case. (I cut away a tiny bit of the TPU near the jacks as well, since it was being deformed when plugging in a cable.) With this done it works beautifully—the case is even thin enough to use a Square credit-card reader in the headphone jack.

tough case recommendations?

One of my favorite things about my Sony Xperia Z3 over the last couple of years has been the Case-Mate Tough Case I've had on it. I drop my phone pretty regularly, and that thing holds up to whatever I throw at it (or, I guess, whatever I throw it at). In addition to being a nice protective dual-layer case, it's also really grippy with a nice texture - I've never had a phone that felt so secure in the hand.
I've been looking for a similar case for the Moto X Pure, but I can't seem to find one; most of the cases I've seen that have a decent protective frame around the edges take themselves out of the running for me with a smooth back (often for the sake of transparency, to show off the custom phone), and the one case I found with a nice texture was a Nillkin skin that doesn't protect the sides and has no lip to raise the screen off a desk.
Anyone have any recommendations for a good case that's durable and protects against drops, and also helps make this giant of a phone feel a little more secure in the hand? (I have been looking at the Incipio Dualpro but haven't gotten a chance to see one in person yet so have no idea what the texture is like.)

I actually like the otterbox defender as it has excellent grip. But it is bulky so it may not be on par with what you are looking for. I like the bulk though as it is perfect for my hand size and maintaining firm control of my phone. The silicone has a textured/ribbed back that is nice.
Sent from my XT1575 using XDA-Developers mobile app

I have the Supcase Beetle -
http://www.amazon.com/SUPCASE-Unicorn-Premium-Protective-Motorola/dp/B0154AQ3QK/
Very good protection, frosted back so you can see the colour/design of your phone. Thick rubber around the sides for grip and protection. The two raised ridges on the back reduce the side to side rocking a bit, which is an issue on our curved backs. Not too expensive. I would recommend considering it.

I have the same problem. I bought the Diztronic Case as well as the Incipio octane.
The octane is surprisingly good looking. It has a frosted back but somehow.. it feels kinda grippy. I can't explain it. It's hard plastic.. but it is gripper than the naked rubber back. It's weird.
The octane is also grippier around the edges (softer TPU) than the diztronic. It's also a little thicker. (enough to be noticeable). BUT the buttons are hard to press (I think I might can fix that but I have yet to work up the nerve to take a razor to my $20 case). The biggest problem here is that the headphone cutout isn't big enough for my ATH-M50s or my AUX cord.... so... yeah. Another thing that could possibly be fixed once I figure out the best way to go about it.
Now, for the Diztronic: This is seriously the best built case I've ever seen for a phone. It fits perfectly. It barely adds any bulk to the phone. I can't speak for the MXP (haven't dropped it yet) but I have carried three phones in diztronic cases and nothing has happened to any of them. There's an attention to detail with Diztronic that you don't get with a lot of other cases. The button cutouts for this case are unlike any case I've ever seen. It's still easy to press the buttons and the buttons stick out from the case the same length that the actual buttons stick out from the phone. It feels like you're pressing the actual buttons. You'll have no problem fitting any headphone cord into this case. The ONLY thing I don't like about this case is that it actually does not add a lot of grip, but overall, its my favorite. I highly recommend it.
Edit: I don't have it but the Incipio dualpro is probably good. It'll add more bulk though.

I'm a fan of the SUPCASE Unicorn Beetle Pro with the holster clip and built-in screen protector. It has held up very well against abuse and saved my MXPE a number of times. Of course you don't need to use the holster, but it does help to protect the screen, especially in a gym bag or whatever. Here is the link: http://www.amazon.com/SUPCASE-Holster-Motorola-Protective-Protector/dp/B0153T7TSI

I have had mine in a Supcase unicorn beetle (with the frosted back) since september 30th, dropped numerous times, easy to put in pocket.
If I needed a holster I'd go with the Supcase heavy duty.

Supcase Unicorn Beetle is perfect

I like the SUPCASE beetle, but like there dustproof/"water resistant " version with interchangeable back plates better
Sent from my XT1575 using XDA-Developers mobile app

I highly recommend the Case Mate Tough Frame bumper for the MXPE. Perfect fit. Ridged power button on the bumper.

Part 2 of 2

I definitely agree about with you about the Diztronic case. The buttons are actually easier to use with the case on than without it. As far as the grip goes, at first I noticed it being a little slippery. However, I have gotten used to it.
elite001mm said:
I have the same problem. I bought the Diztronic Case as well as the Incipio octane.
The octane is surprisingly good looking. It has a frosted back but somehow.. it feels kinda grippy. I can't explain it. It's hard plastic.. but it is gripper than the naked rubber back. It's weird.
The octane is also grippier around the edges (softer TPU) than the diztronic. It's also a little thicker. (enough to be noticeable). BUT the buttons are hard to press (I think I might can fix that but I have yet to work up the nerve to take a razor to my $20 case). The biggest problem here is that the headphone cutout isn't big enough for my ATH-M50s or my AUX cord.... so... yeah. Another thing that could possibly be fixed once I figure out the best way to go about it.
Now, for the Diztronic: This is seriously the best built case I've ever seen for a phone. It fits perfectly. It barely adds any bulk to the phone. I can't speak for the MXP (haven't dropped it yet) but I have carried three phones in diztronic cases and nothing has happened to any of them. There's an attention to detail with Diztronic that you don't get with a lot of other cases. The button cutouts for this case are unlike any case I've ever seen. It's still easy to press the buttons and the buttons stick out from the case the same length that the actual buttons stick out from the phone. It feels like you're pressing the actual buttons. You'll have no problem fitting any headphone cord into this case. The ONLY thing I don't like about this case is that it actually does not add a lot of grip, but overall, its my favorite. I highly recommend it.
Edit: I don't have it but the Incipio dualpro is probably good. It'll add more bulk though.
Click to expand...
Click to collapse

bill875 said:
I'm a fan of the SUPCASE Unicorn Beetle Pro with the holster clip and built-in screen protector. It has held up very well against abuse and saved my MXPE a number of times. Of course you don't need to use the holster, but it does help to protect the screen, especially in a gym bag or whatever. Here is the link: http://www.amazon.com/SUPCASE-Holster-Motorola-Protective-Protector/dp/B0153T7TSI
Click to expand...
Click to collapse
One of the best fa sure... Looking for a replacement.. Any other similar quality cases out there?