Related
While recently trying to update my opo running cm11 I clicked install update but then it rebooted and just went to a black screen and did nothing. I rebooted it but it hadn't installed. I found my boot loader was locked and i had no recovery at all installed does anyone know how to fix this.
tom_clegg said:
While recently trying to update my opo running cm11 I clicked install update but then it rebooted and just went to a black screen and did nothing. I rebooted it but it hadn't installed. I found my boot loader was locked and i had no recovery at all installed does anyone know how to fix this.
Click to expand...
Click to collapse
Use fastboot & ADB guide for beginners. Download all required files so your PC can Connect to OPO VIA USB from PC. What PC OS do u use? Windows or Linux. Watch how to unlock boot loader, root, & install recovery tool or Return to stock OnePlus one YouTube video. Easiest start. Your phone will be OK. U need to down load drivers so u can use your PC to talk to your phone - pass instruction & activate 1+1 options. Install CM 11 or whatever ROM u want to use, as well as, 1+1 tools u may have lost is Recovery Tool.
Fstop said:
Use fastboot & ADB guide for beginners. Download all required files so your PC can Connect to OPO VIA USB from PC. What PC OS do u use? Windows or Linux. Watch how to unlock boot loader, root, & install recovery tool or Return to stock OnePlus one YouTube video. Easiest start. Your phone will be OK. U need to down load drivers so u can use your PC to talk to your phone - pass instruction & activate 1+1 options. Install CM 11 or whatever ROM u want to use, as well as, 1+1 tools u may have lost is Recovery Tool.
Click to expand...
Click to collapse
I use a mac and i tried to use a recovery tool however it says boot loader needed to be unlocked which mine wasn't and it wouldn't unlock because i had no recovery at all.
tom_clegg said:
I use a mac and i tried to use a recovery tool however it says boot loader needed to be unlocked which mine wasn't and it wouldn't unlock because i had no recovery at all.
Click to expand...
Click to collapse
You don't need a recovery to unlock the bootloader. Just boot it into fastboot mode, connect it to your Mac, and type 'fastboot oem-unlock' on the Terminal. Be careful, though, because you WILL lose ALL of your data!
Sent from my LG-V500 using Tapatalk
GXGOW said:
You don't need a recovery to unlock the bootloader. Just boot it into fastboot mode, connect it to your Mac, and type 'fastboot oem-unlock' on the Terminal. Be careful, though, because you WILL lose ALL of your data!
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
where do i find the files for mac with fast boot adb etc.
tom_clegg said:
I use a mac and i tried to use a recovery tool however it says boot loader needed to be unlocked which mine wasn't and it wouldn't unlock because i had no recovery at all.
Click to expand...
Click to collapse
Hmmm no recovery? When u hold down volume + power ?
Did u find the fastboot & adb tools for Mac?
What happens when u hold volume key up + power button at same time after turning device off?
What happens if u $fastboot devices -
Can u issue cmd "$fastboot oem unlock"
Know its frustrating but have to keep trying till u get in. Just have the rom files unzipped on your Mac ready to flash 1+1 when u get in. Its how I did it. When I wasn't able to but into recovery. Get on fastboot go thru OEM unlock, then flash 1+1. Follow the install script manually. Open script w plain text reader & just issue cmds following script. I don't trust scripts I + automation to get things unstuck.
tom_clegg said:
where do i find the files for mac with fast boot adb etc.
Click to expand...
Click to collapse
Use Google, there are plenty of guides available online. Once you have fastboot working the best thing to do is to flash the stock images with fastboot. I have detailed instructions in section 8a of my guide here:
http://forum.xda-developers.com/showthread.php?t=2839471
Please note that fastboot commands are slightly different on a Mac but you'll see that when you view a guide on how to set it up and use it.
Heisenberg said:
Use Google, there are plenty of guides available online. Once you have fastboot working the best thing to do is to flash the stock images with fastboot. I have detailed instructions in section 8a of my guide here:
http://forum.xda-developers.com/showthread.php?t=2839471
Please note that fastboot commands are slightly different on a Mac but you'll see that when you view a guide on how to set it up and use it.
Click to expand...
Click to collapse
would u be able to do a short one for mac that would help a lot with the commands
tom_clegg said:
would u be able to do a short one for mac that would help a lot with the commands
Click to expand...
Click to collapse
There's no point in duplicating my guide when all that's needed are a couple of extra characters prefixing each fastboot command.
Heisenberg said:
There's no point in duplicating my guide when all that's needed are a couple of extra characters prefixing each fastboot command.
Click to expand...
Click to collapse
is it just ./ then the command?
can i message you somehow maybe so it is quicker
tom_clegg said:
is it just ./ then the command?
can i message you somehow maybe so it is quicker
Click to expand...
Click to collapse
Dude, in the time it's taken you to ask these questions here you could have already found the answers online and completed the task. I'm here to help people but I'm not about spoon feeding, it doesn't benefit you in any way.
Heisenberg said:
Dude, in the time it's taken you to ask these questions here you could have already found the answers online and completed the task. I'm here to help people but I'm not about spoon feeding, it doesn't benefit you in any way.
Click to expand...
Click to collapse
fine then
tom_clegg said:
would u be able to do a short one for mac that would help a lot with the commands
Click to expand...
Click to collapse
at the point where i do fastboot oem unlock it reboots but stays at the boot screen.
tom_clegg said:
fine then
Click to expand...
Click to collapse
Don't get an attitude because I'm trying to help you help yourself.
tom_clegg said:
at the point where i do fastboot oem unlock it reboots but stays at the boot screen.
Click to expand...
Click to collapse
Issue the Mac equivalent of this command:
Code:
fastboot oem device-info
What does it return?
Heisenberg said:
Don't get an attitude because I'm trying to help you help yourself.
Issue the Mac equivalent of this command:
Code:
fastboot oem device-info
What does it return?
Click to expand...
Click to collapse
I type fastboot oem unlock and it is meant to reboot into android but however it stays stuck on the boot screen
tom_clegg said:
I type fastboot oem unlock and it is meant to reboot into android but however it stays stuck on the boot screen
Click to expand...
Click to collapse
That isn't what I asked you, if you want help you need to answer the questions that you're asked.
Heisenberg said:
That isn't what I asked you, if you want help you need to answer the questions that you're asked.
Click to expand...
Click to collapse
it says device tampered true
unlocked false
charge screen enabled false
tom_clegg said:
it says device tampered true
unlocked false
charge screen enabled false
Click to expand...
Click to collapse
Ok, try the unlock command again. What recovery did you previously have installed?
Heisenberg said:
Ok, try the unlock command again. What recovery did you previously have installed?
Click to expand...
Click to collapse
still the same thing sorry just stuck on boot screen.
i would have been able to do it its just this which i wasn't sure about :/
tom_clegg said:
still the same thing sorry just stuck on boot screen.
i would have been able to do it its just this which i wasn't sure about :/
Click to expand...
Click to collapse
You definitely can't boot into recovery? Most times not being able to get into recovery it's a case of user error. Hold volume down, then hold power (so you're holding them together), when you see the OnePlus boot logo let go of power but keep holding volume down until you reach recovery.
I got a rca voyager 3 model RCT6973W43 and I need to flash a new rom which I cannot find anywhere. Can you send me a ROM and the flash tool? I got it free and I want to try it get it working. It’s stuck at the voyager 3 logo
kapicarules said:
I got a rca voyager 3 model RCT6973W43 and I need to flash a new rom which I cannot find anywhere. Can you send me a ROM and the flash tool? I got it free and I want to try it get it working. It’s stuck at the voyager 3 logo
Click to expand...
Click to collapse
Hey bro, I've used these guys. Good luck
https://www.needrom.com
Sent from my HTC One M9 using Tapatalk
No RCA I might need to find a similar tablet and dump the firmware
kapicarules said:
No RCA I might need to find a similar tablet and dump the firmware
Click to expand...
Click to collapse
It's been a while since I played with RCA devices, which version of Android is it running?
NepoRood said:
It's been a while since I played with RCA devices, which version of Android is it running?
Click to expand...
Click to collapse
Android 6.0
kapicarules said:
Android 6.0
Click to expand...
Click to collapse
Sorry, not on the Chinese site we used for Viking and Maven firmware, it may show up eventually though...
link me to that chinese website
kapicarules said:
I got a rca voyager 3 model RCT6973W43 and I need to flash a new rom which I cannot find anywhere. Can you send me a ROM and the flash tool? I got it free and I want to try it get it working. It’s stuck at the voyager 3 logo
Click to expand...
Click to collapse
Bro,the device hasn't even been rooted yet. I just purchased one today. There is supposedly a bootloader unlock but no custom recovery yet and no root yet
DMon04 said:
Bro,the device hasn't even been rooted yet. I just purchased one today. There is supposedly a bootloader unlock but no custom recovery yet and no root yet
Click to expand...
Click to collapse
I want to compile AOSP for it and not just root it. Have done it for my pixel but its easier with begin provided propitiatory blobs.
I found this other post on a similar device https://forum.xda-developers.com/general/general/guide-rca-voyager-rct6873w42-unlock-t3582973
Got into fastboot via usb debugging adb reboot fastboot (There doesn't appear to be a button shortcut to boot into it so you may be SOL even if a rom does come out)
Successfully Unlocked the bootloader
Was able to get a root shell via booting the cwm recovery
Dumped the boot.img, recovery.img via CWM but system failed
Was able to dump system via dd command
Still new to ROM building trying to understand vendor trees and device trees for building an AOSP ROM for it, noticed the system doesn't have a /device folder so a lot of tutorials don't seam too helpful.
Flashing the CWM recovery image from the above link breaks the recovery, had to flash back to old recovery, my next steps are to try and modify the stock recovery to enable adb so if i bork system i can button boot to recovery and use adb to get to fastboot otherwise it will be bricked...
Getting anywhere on this?
darkvoxels said:
I want to compile AOSP for it and not just root it. Have done it for my pixel but its easier with begin provided propitiatory blobs.
I found this other post on a similar device https://forum.xda-developers.com/general/general/guide-rca-voyager-rct6873w42-unlock-t3582973
Got into fastboot via usb debugging adb reboot fastboot (There doesn't appear to be a button shortcut to boot into it so you may be SOL even if a rom does come out)
Successfully Unlocked the bootloader
Was able to get a root shell via booting the cwm recovery
Dumped the boot.img, recovery.img via CWM but system failed
Was able to dump system via dd command
Still new to ROM building trying to understand vendor trees and device trees for building an AOSP ROM for it, noticed the system doesn't have a /device folder so a lot of tutorials don't seam too helpful.
Flashing the CWM recovery image from the above link breaks the recovery, had to flash back to old recovery, my next steps are to try and modify the stock recovery to enable adb so if i bork system i can button boot to recovery and use adb to get to fastboot otherwise it will be bricked...
Click to expand...
Click to collapse
You get anywhere on dev for this device? I found one at work and was wanting to give it a shot.. unfortunately it's barren here and supa old hah.. AOSP would be nice for this though.
BA_Flash_GOD said:
You get anywhere on dev for this device? I found one at work and was wanting to give it a shot.. unfortunately it's barren here and supa old hah.. AOSP would be nice for this though.
Click to expand...
Click to collapse
Unfortunately I did not. Mine is still a brick sitting on a shelf, been playing with GSI/Treble for oneplus 6 lately.
darkvoxels said:
I want to compile AOSP for it and not just root it. Have done it for my pixel but its easier with begin provided propitiatory blobs.
I found this other post on a similar device https://forum.xda-developers.com/general/general/guide-rca-voyager-rct6873w42-unlock-t3582973
Got into fastboot via usb debugging adb reboot fastboot (There doesn't appear to be a button shortcut to boot into it so you may be SOL even if a rom does come out)
Successfully Unlocked the bootloader
Was able to get a root shell via booting the cwm recovery
Dumped the boot.img, recovery.img via CWM but system failed
Was able to dump system via dd command
Still new to ROM building trying to understand vendor trees and device trees for building an AOSP ROM for it, noticed the system doesn't have a /device folder so a lot of tutorials don't seam too helpful.
Flashing the CWM recovery image from the above link breaks the recovery, had to flash back to old recovery, my next steps are to try and modify the stock recovery to enable adb so if i bork system i can button boot to recovery and use adb to get to fastboot otherwise it will be bricked...
Click to expand...
Click to collapse
I realize this is an old post but I'm hoping you may be able to help me.
I just got this device and was wondering how you got the bootloader unlocked. When I try to select OEM unlock in settings it just jumps back to off. And fastboot flashing unlock gives me an error.
Any help would be appreciated.
Isrgish said:
I realize this is an old post but I'm hoping you may be able to help me.
I just got this device and was wondering how you got the bootloader unlocked. When I try to select OEM unlock in settings it just jumps back to off. And fastboot flashing unlock gives me an error.
Any help would be appreciated.
Click to expand...
Click to collapse
Hi yeah it's been a while since I bricked mine.. still sitting on a shelf as brick.. If I remember correctly when you do the OEM unlock from fastboot it flashes very briefly the screen to the unlock with instructions and button combination. What I did was run the command while using my phone to record the screen so see the instructions, then I went back watched the video to see what they were
I then went back to fastboot got the command ready again got my fingers in position before hitting enter and just tried to be as fast about it as possible and it worked for me.
darkvoxels said:
Hi yeah it's been a while since I bricked mine.. still sitting on a shelf as brick.. If I remember correctly when you do the OEM unlock from fastboot it flashes very briefly the screen to the unlock with instructions and button combination. What I did was run the command while using my phone to record the screen so see the instructions, then I went back watched the video to see what they were
I then went back to fastboot got the command ready again got my fingers in position before hitting enter and just tried to be as fast about it as possible and it worked for me.
Click to expand...
Click to collapse
Thanks for the reply.
How did you do a record the screen? Is there such an option while in fastboot?
Thank You,
darkvoxels said:
... using my phone to record the screen so see the instructions, then I went back watched the video to see what they were ...
Click to expand...
Click to collapse
Can you please tell me how you recorded the screen while in fastboot?
Thanks
I managed to get the bootloader unlocked on my Alco RCA Voyager III and just never got around to finding recovery or anything for it, this device a lost cause or am I just missing something? I don't think I can pull off making a recovery or rom yet but I can give it a shot if no one else is bothering with this device now a days.
@Trolldizzle How did you get it unlocked?
Thanks
@Isrgish I used fastboot flashing unlock command if I remember correctly, been a little bit since I did the unlock but I am like 90% sure that was the command.
i had get link here : findrom.info/rca-rct6973w43
you can try
Here you can find thr ROM. http://detonnot.com/3Xt3
I was working on rooting my device, and had a working root successfully with Magisk. But then I wanted to remove it and relock my bootloader, that's when the trouble started.
I am able to boot the phone and it is working. I can boot to recovery (stock OEM not TWRP), can boot to bootloader, and can boot and use the Oxygen OS. But I cannot get fastboot to run to lock the bootloader. ADB devices comes up empty. These are the steps that I've tried:
-using it on my chromebook that was working with ADB before the unrooting mess
-installed fastboot and adb along with Oneplus USB drivers on a fresh Windows 8 copy
-2 different red OEM oneplus cables
My goal is to return completely to stock and a locked bootloader. Any help would be appreciated, it really seems to be a phone issue and not a driver issue. Thanks everyone!
Use the unbrick tool. That autolocks bootloader when it flashes stock.
NateDev said:
Use the unbrick tool. That autolocks bootloader when it flashes stock.
Click to expand...
Click to collapse
I looked into the tool, but I thought from what I read I had to be in fastboot mode to start. I can't get fastboot or adb to connect. Do you know if it will work without fastboot?
bam099 said:
I looked into the tool, but I thought from what I read I had to be in fastboot mode to start. I can't get fastboot or adb to connect. Do you know if it will work without fastboot?
Click to expand...
Click to collapse
Are you sure you have USB debugging checked in developer options?
Absolutely. Just checked again. I would normally say it was a driver issue, but it was working fine until I flashed a boot.img and also I used a windows pc and a Chromebook and chrome os pretty much comes ready to talk to android phones or of the box. I was wondering if adb could have been messed up during the flashing of boot images.
bam099 said:
I looked into the tool, but I thought from what I read I had to be in fastboot mode to start. I can't get fastboot or adb to connect. Do you know if it will work without fastboot?
Click to expand...
Click to collapse
No fastboot needed, it's done with the phone off.
NateDev said:
No fastboot needed, it's done with the phone off.
Click to expand...
Click to collapse
Even better! I will definitely try the tool and report back.
NateDev said:
No fastboot needed, it's done with the phone off.
Click to expand...
Click to collapse
This was correct and it worked. Phone is restored back to stock with a locked bootloader and everything is working as it should.
Hi,
I'm trying to boot a twrp image on my Motorola One Vision without flashing it or rooting the phone. Reason is I want to try it out and also tweek som files but not necessarily rooting it.
I've unlocked the boot loader and enabled developer options and set USB to debugging. When I connect the phone to the computer and use ./adb devices it is detected fine. When I disconnect, reboot and enable fastboot I get the fast boot menu with the options but when I connect it to the computer it will not detect the phone. ./adb devices give no output and ./fastboot boot /PATH/TO/IMAGE.FILE just gives the output "waiting for device". I've tried this from both my windows partition and Linux Debian with the same result. Cables are fine as I can use adb to pull files and such. It's basically in the fastboot menu that it doesn't seem to respond.
The phone is running Android 10 Kane 4.14. I've tried twrp 3.4 but I don't think the image is the issue since it won't respond to commands in fastboot.
Does anyone have any suggestions for troubleshooting this? Any and all help is appreciated.
Kind regards
Magnus
Ps: Posted this a few days ago in the general Q&A as a suspect it's not necessarily a specific One Vision problem but it didn't get any replies so I'll try here. Sorry if it's a bit of a double post. ds-
I've made some headway and manage to reboot and connect but when I try to ./fastboot boot IMAGE I get the message Validation image failed.
If I understood it correct it's not possible to boot an image in this way which is of an earlier version than the one installed. Is this correct?
I''ve got 4.4 installed, and the image is 3.4.
/Magnus
Cardinal_Vice said:
I've made some headway and manage to reboot and connect but when I try to ./fastboot boot IMAGE I get the message Validation image failed.
If I understood it correct it's not possible to boot an image in this way which is of an earlier version than the one installed. Is this correct?
I''ve got 4.4 installed, and the image is 3.4.
/Magnus
Click to expand...
Click to collapse
Did you flash the patched vbmeta image?
ttomovcik said:
Did you flash the patched vbmeta image?
Click to expand...
Click to collapse
No, I can't get that to work. I'm not sure if I understand where I should place it.
Appreciate that you pitch in.
I have a One Vision x1907-1 variant and recently it bricked. The device can't be recognized and don't works with the motorola drivers . So it's similar issue maybe
mjraogr said:
I have a One Vision x1907-1 variant and recently it bricked. The device can't be recognized and don't works with the motorola drivers . So it's similar issue maybe
Click to expand...
Click to collapse
No, my phone works perfectly fine. I just can't flash the vbmeta image and I can't run the .bat file.
Hi guys,
so after I got my xiaomi with a global ROM and wanted to update and that is when I accidentally relocked the bootloader. The version of ROM was invalid apparently and wouldn't let me boot and now I'm stuck in fastboot mode.
My problem is as follows:
-can't enter recovery, stuck at fastboot no matter how many times I try and reboot
-adb not working since I didn't enable it
-bootloader locked (miflash says so and it can't unlock it since I didn't check 'oem unlock enable' and I cannot boot ROM so I can't enable it)
-fastboot flashing says 'not allowed in lock state'
-edl mode not available
I've seen tutorials where people opened their phones to force the phone into edl mode via the testing points but is that the only way`?
Any suggestions on how I could unbrick it?
Much appreciated
yes, it is the only way.
koniv90 said:
Hi guys,
Any suggestions on how I could unbrick it?
Much appreciated
Click to expand...
Click to collapse
you can use this tool to flash the phone on fastboot mode
Xiaomi King Tool - Home.
xiaomikingtool.com
its cost you only 5 credit
Can you flash files by fastboot? if so, flash the global rom images one by one, then reboot
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
I need help please my phone redmi k50 gaming is no recovery and . bootloader is locked
eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
This what I'm facing
Dims_Camper said:
yes, it is the only way.
Click to expand...
Click to collapse
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
kskksks said:
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
Click to expand...
Click to collapse
Nope, only very old devices.
NOSS8 said:
Nope, only very old devices.
Click to expand...
Click to collapse
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
kskksks said:
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
Click to expand...
Click to collapse
Have you tried to flash stock rom?
I mean, if you have Chinese rom before, just flash with latest Chinese rom.
Ghanaba said:
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
Click to expand...
Click to collapse
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
jholfran3 said:
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
Click to expand...
Click to collapse
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
flashing is possible with modified firehose programmer (no auth factory loader) or with authorized xiaomi account. both solutions are paid service and cannot advertised here.
please -as always- read the thread you posted in. I can see useful information shared already. wait for other replies.
letsgofly said:
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
Click to expand...
Click to collapse
Hi, try to flash the .img files from the fastboot stock rom whit cdm in fastboot, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
example:
fastboot flash boot boot.img
fastboot flash cust cust.img
etc.
jholfran3 said:
Hi, try to flash the .img files from the fastboot stock rom, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
Click to expand...
Click to collapse
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
NOSS8 said:
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
Click to expand...
Click to collapse
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
jholfran3 said:
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
Click to expand...
Click to collapse
To install a recovery, the bootloader must be unlocked.