Database Info

TL-10 no OS

Hi guys..hope somebody can help me to get my phone working again..i had lollipop installed and by accident I deleted the internal memory..the only thing what I can is to reboot to recovery twrp..and then on my pc phone shows up..1 cust drive and 1 internal..which is empty..do you have any idea about that? thanks a lot..please help )))

Download the stock rom for your phone model (tl-10) official one, NOT beta version, better directly from Huawei web site.
Extract stock recovery from downloaded file (by using huawei extractor app).
Using ADB commands, flash stock recovery. Then copy stock rom to sdcard and proceede with 3button procedure.
If any of these operations sound new to you, please use "search" button in these forums.

tuddu said:
Download the stock rom for your phone model (tl-10) official one, NOT beta version, better directly from Huawei web site.
Extract stock recovery from downloaded file (by using huawei extractor app).
Using ADB commands, flash stock recovery. Then copy stock rom to sdcard and proceede with 3button procedure.
If any of these operations sound new to you, please use "search" button in these forums.
Click to expand...
Click to collapse
I have downloaded from Huawei web site 120sp04 firmware. I extracted recovery, flashed with adb commands. Copied the stock rom to sd card, and i am not able to force my phone to start update. keeps restarting. is the a special trick for this 3 button procedure? phone should be off, but from bootloader i cannot switch of the phone. Is it possible that the phone doesn't recognize my SD Card? please advise.

Please check, there' s a command trough ADB (I think adb reboot) wich reboot phone.
Then, someone, has been forced to keep the SD card NOT inserted into the phone, waited for reboot and then (after huawei logo I think, but I'm not sure; please check) inserted the SD card.
Then proceede with local update (forced method).
As for the 3button method, simply press and keep pressed volume up+volume down + power on button. All togheter.
Then the phone must boot automatically into recovery and start the procedure itself.
It i clear: stock recovery MUST be already installed !!!

tuddu said:
Please check, there' s a command trough ADB (I think adb reboot) wich reboot phone.
Then, someone, has been forced to keep the SD card NOT inserted into the phone, waited for reboot and then (after huawei logo I think, but I'm not sure; please check) inserted the SD card.
Then proceede with local update (forced method).
As for the 3button method, simply press and keep pressed volume up+volume down + power on button. All togheter.
Then the phone must boot automatically into recovery and start the procedure itself.
It i clear: stock recovery MUST be already installed !!!
Click to expand...
Click to collapse
The only thing what i can do is, to flash recovery and boot from fastboot.zip( http://forum.xda-developers.com/mate-7/help/5-1-to-4-4-2-bootloop-t3132888 ) i guess for L09 version, where i can get to update mode with 3 buttons...all other possibilities are not possible. even if i extract from original firmware recovery and boot images, nothing work..i was going from B125 back to B123 to B128 and B313 when in TWRP i deleted everything. Phone is charging, i can turn it off..OS is missing..is it possible that somebody would make a back up in twrp and i would flash it on my phone? or what version of firmware i should start with? what about sideload? does it help? please advise.

alworth said:
The only thing what i can do is, to flash recovery and boot from fastboot.zip( http://forum.xda-developers.com/mate-7/help/5-1-to-4-4-2-bootloop-t3132888 ) i guess for L09 version, where i can get to update mode with 3 buttons...all other possibilities are not possible. even if i extract from original firmware recovery and boot images, nothing work..i was going from B125 back to B123 to B128 and B313 when in TWRP i deleted everything. Phone is charging, i can turn it off..OS is missing..is it possible that somebody would make a back up in twrp and i would flash it on my phone? or what version of firmware i should start with? what about sideload? does it help? please advise.
Click to expand...
Click to collapse
Hello!
I have similar problems, but i have the L09.
Check if you can mount system. Or if you can wipe system, because i can't
Good luck!

MATE 7 not booting

Hi, need some urgent help here.
I was trying to install a custom rom, so I unlocked first the bootloader, then flashed twrp 3.0.2 for Android 5.1 and with it I flashed KangVip rom (porto from honor 6).
Problem was it didn't boot, just black screen.
So I supposed the problem was with the rom so I flashed via fastboot the aosp 6, obviously with same results.
I tried lot of stuff (twrp 2.8.x.x, reinstall stock firmware, restore twrp backup of stock full firmware and so on - I did almost everything I could do) and now I'm with a Huge problem: no huawei logo at start, just a white screen and nothing happen. I have twrp 3.0.2 for 5.1 installed right now but I can't install stock recovery.
Please help me, what do I gotta do?
[emoji30]

the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..

fazi2015 said:
the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..
Click to expand...
Click to collapse
Thx for this.
But I have a problem, I can't install stock recovery and if I try to flash the .img files extracted from update.app nothing happens.
Also, I still have that problem with huawei logo disappeared and a blank white screen instead.
Sent from my HUAWEI GRA-L09 using Tapatalk

boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....

fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Solved, thanks!
Sent from my HUAWEI GRA-L09 using Tapatalk

fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!

jfer671 said:
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!
Click to expand...
Click to collapse
are you have unlock bootloader or not..

fazi2015 said:
are you have unlock bootloader or not..
Click to expand...
Click to collapse
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.

jfer671 said:
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.
Click to expand...
Click to collapse
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...

fazi2015 said:
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...
Click to expand...
Click to collapse
Thank you very much....hope that will solve the boot issue and bring this unit back to life

Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...

jfer671 said:
Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...
Click to expand...
Click to collapse
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..

fazi2015 said:
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..
Click to expand...
Click to collapse
Unfortunately, it says the file is no longer available

jfer671 said:
Unfortunately, it says the file is no longer available
Click to expand...
Click to collapse
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597

fazi2015 said:
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597
Click to expand...
Click to collapse
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts

jfer671 said:
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts
Click to expand...
Click to collapse
I know it's annoying but last time I research more and guide you I was have same problem don't give up....

I send you recovery flash in fastboot no need of usb debugging usb debugging need for adb not for fastboot in fastboot flash recovery by your self download it
https://mega.co.nz/#!GRw0CZjQ!iZllDkA6yJeWk7iEA4vEVA94r2nM_YjAuiS8B9IZdm0
then extract the zip go to resource and hold shift and left click then select open command port here then power off device completely boot into fastboot (bootloader) connect the device to pc and in command port type
fastboot flash recovery twrp_2_7.img
after that type
fastboot reboot and hold the volume- button of device it'll boot into recovery if you success then reply..

I've noticed two things when flashing KK or LP. On KK, the phone does a constant boot loop with Huawei logo (on off on off), but on LP the Huawei logo hangs...it doesn't boot loop. Is this an indication or just a fault with both OS?

need help restoring honor 8 L04

My Honor 8 (FRD-L04) with official firmware (latest), unlocked bootloader and TWRP recovery, ended in a boot loop
turns on, blue screen, gives the orange unlocked bootloader screen, loads animation and stays on blue screen with honor in white, dims screen and reboots
happened after tinkering around with Magisk and AppSystemizer
moved GPS Joystick to /system/app/ and enabled the options in app, rebooted my phone and it kept rebooting
I can get to fastboot and twrp,
I made the not so wise decision of a partial backup after installing twrp, only backing up Boot, Cache, System and Vendor (didn't have enough space for full)
I downloaded HuaweiUpdateExtraxtor and did the following:
1. Extracted the recovery.img from update.app
2. Fastboot flashed the extracted recovery.img
3. Copied the update.app to a folder named dload located on my uSD root
4. Unplugged and rebooted while pressing vol up, vol down and power
It loads the EMUI update screen says installing update, 5% and fails
tried those steps with B122, B141, B150, B162
Am I missing something?

I had a very similar experience about a month ago.
I was never able to get back to stock because the dload method failed on all my tries on my L04 at 5% so maybe I'm not one to say whether you're doing it correctly but that's the same method I've used that I found from multiple sources.
If you don't have a back up phone I'd suggest flashing twrp and going to a custom rom, aospa is working very well for me, otherwise I think the best bet is to wait for a new update and get that update.app because every link I've tried thats supposed to direct to hicloud L04 B385 update.app is broken, while the L09 links seem to work.
Edit: According to this guide , you should only be pressing volume up and power, so try that.

progress so far, I followed Rommco05 instructions and downloaded
http://update.hicloud.com:8180/TDS/d...ull/update.zip
from https://forum.xda-developers.com/ho...tock-firmware-packages-honor-8-t3501942/page8
flashed TWRP and installed the first one through TWRP, when rebooted gave me a red exclamation! (can't remember what it said)
Downloaded B360 from
http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=FRD-L04&firmware_page=0
and copied the update.app to dload folder on uSD
vol up, vol down and power and it finally installed something, but was asking for storage password and keyboard was missing
read somewhere that the recently flashed firmware was trying to use the previous firmware storage or something like that and was fixed by deleting /data
so I went to erecovery (vol up, power) and wiped data... it fixed the storage password but it booted a weird firmware (very laggy, said it was B389 and had no keyboard!!! )
finally followed instructions on link provided by gophillyourself (Thanks!) and that rolled me back to B122!
Currently updating using updater

[solved] bypass frp lock while drk error

This tutorial will help you to bypass frp lock while direct root key or DRK is damage. I tried so many ways to bypass the frp but its custom binary blocked by frp every time i flashed a file.
1. download odin 3.12.x
2. Download and Flash factory binary
factory binary
Or you can refer to this thread
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
Or this
click here
3. Flash the factory binary using odin. Just ticm ap then browse your downloaded file. enable dev opt. Usb debugging. (Enable dot search B under usb debugging if no yet activated)
4. download apk installer software for pc and Install
download here
5. After installing apk installer for pc. It will automatically detect your phone
5. Download kingroot.apk
kingroot download
6. After downloading kingroot.apk open APK Installer for pc and browse for kingroot.apk then install
7. After successfully installed go to your S7 then open* kingroot application.
8. Before you root connect your s7 to wifi.
9. Root your phone using kingroot. (In case you see"Just tap request" choose your s7, just wait after a while you will be able to root it.
10. If successfully rooted, Bypass frp using any frp bypassing app. (I recommend srs unlock because it has free bypass on frp download here ) or maybe you can just other application to bypass frp like crack z3x samsung tool 29.5, frp tool pro, frp hijacker, etc that supports g930f/fd.
11. Perform factory data reset under settings and after that try to perform wipe data/factory data reset thru recovery mode and wipe cache
12. Turn off your phone
13. Go to download mode. Press and hold at the same time (vol.down+home button+power button)
14. Check if the rhe FRP status was turn off
15. Flash your stock firmware.
Once you flashed your firmware successful. You will encounter an error about dm verity verification.
You just need to flash twrp 3.2.0.4 and install the disable dm verity zip file. Or you can just search to google if you want. I dont have enough time to upload the files but if i have free time. I will update this thread
In case of error try to repeat.
Do at your own risk. I have no responsibility if you brick your phone. Thou it was already brick hehehe just kidding
Im just here helping to share the method ive found thru searching the web.
It works for me.
You can also donate if you find this tutorial is helpful
Btc: 38DqbW3KppDGQWnqVh3qT9nCZQKNCBCSes
Eth: 0x99aaed9c3fb9b1ba0626a8ffec618cad06c18153
Credits to all the owners of the links ive provided
Lìnks:
http://q.gs/E7Ha9
http://q.gs/E7KKJ

Up

kripto00 said:
This tutorial will help you to bypass frp lock while direct root key or DRK is damage. I tried so many ways to bypass the frp but its custom binary blocked by frp every time i flashed a file.
1. download odin 3.12.x
2. Download and Flash factory binary
factory binary
Or you can refer to this thread
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
Or this
click here
3. Flash the factory binary using odin. Just ticm ap then browse your downloaded file. enable dev opt. Usb debugging. (Enable dot search B under usb debugging if no yet activated)
4. download apk installer software for pc and Install
download here
5. After installing apk installer for pc. It will automatically detect your phone
5. Download kingroot.apk
kingroot download
6. After downloading kingroot.apk open APK Installer for pc and browse for kingroot.apk then install
7. After successfully installed go to your S7 then open* kingroot application.
8. Before you root connect your s7 to wifi.
9. Root your phone using kingroot. (In case you see"Just tap request" choose your s7, just wait after a while you will be able to root it.
10. If successfully rooted, Bypass frp using any frp bypassing app. (I recommend srs unlock because it has free bypass on frp download here ) or maybe you can just other application to bypass frp like crack z3x samsung tool 29.5, frp tool pro, frp hijacker, etc that supports g930f/fd.
11. Perform factory data reset under settings and after that try to perform wipe data/factory data reset thru recovery mode and wipe cache
12. Turn off your phone
13. Go to download mode. Press and hold at the same time (vol.down+home button+power button)
14. Check if the rhe FRP status was turn off
15. Flash your stock firmware.
Once you flashed your firmware successful. You will encounter an error about dm verity verification.
You just need to flash twrp 3.2.0.4 and install the disable dm verity zip file. Or you can just search to google if you want. I dont have enough time to upload the files but if i have free time. I will update this thread
In case of error try to repeat.
Do at your own risk. I have no responsibility if you brick your phone. Thou it was already brick hehehe just kidding
Im just here helping to share the method ive found thru searching the web.
It works for me.
You can also donate if you find this tutorial is helpful
Btc: 38DqbW3KppDGQWnqVh3qT9nCZQKNCBCSes
Eth: 0x99aaed9c3fb9b1ba0626a8ffec618cad06c18153
Credits to all the owners of the links ive provided
Lìnks:
http://q.gs/E7Ha9
http://q.gs/E7KKJ
Click to expand...
Click to collapse
I am rooted with magisk. is rooting with kingroot necessary?

LineArc said:
I am rooted with magisk. is rooting with kingroot necessary?
Click to expand...
Click to collapse
Once combination file is flashed its neccessary to use kingroot because you cant flash twrp while frp on and drk error

LineArc said:
I am rooted with magisk. is rooting with kingroot necessary?
Click to expand...
Click to collapse
If you root your phone before and flashed combjnation file,Root will be gone. So use king root.apk thru apk installer because no file.manager in combination file

kripto00 said:
If you root your phone before and flashed combjnation file,Root will be gone. So use king root.apk thru apk installer because no file.manager in combination file
Click to expand...
Click to collapse
the thing is that I get error while flashing combination file. something like device 2 binary 1.
right now my binary are samsung official and system is custom. need your help bruh.

LineArc said:
the thing is that I get error while flashing combination file. something like device 2 binary 1.
right now my binary are samsung official and system is custom. need your help bruh.
Click to expand...
Click to collapse
When i flash factory binary no error at all. Try to download intrtnational version of factory bimary or combination file

kripto00 said:
When i flash factory binary no error at all. Try to download intrtnational version of factory bimary or combination file
Click to expand...
Click to collapse
Thank you for your help but I got mine repaired. A guy shared a link with me which I flashed with Odin it was a full firmware and surprisingly it did not get any error this time.
But still thank you

kripto00 said:
This tutorial will help you to bypass frp lock while direct root key or DRK is damage. I tried so many ways to bypass the frp but its custom binary blocked by frp every time i flashed a file.
1. download odin 3.12.x
2. Download and Flash factory binary
factory binary
Or you can refer to this thread
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
Or this
click here
3. Flash the factory binary using odin. Just ticm ap then browse your downloaded file. enable dev opt. Usb debugging. (Enable dot search B under usb debugging if no yet activated)
4. download apk installer software for pc and Install
download here
5. After installing apk installer for pc. It will automatically detect your phone
5. Download kingroot.apk
kingroot download
6. After downloading kingroot.apk open APK Installer for pc and browse for kingroot.apk then install
7. After successfully installed go to your S7 then open* kingroot application.
8. Before you root connect your s7 to wifi.
9. Root your phone using kingroot. (In case you see"Just tap request" choose your s7, just wait after a while you will be able to root it.
10. If successfully rooted, Bypass frp using any frp bypassing app. (I recommend srs unlock because it has free bypass on frp download here ) or maybe you can just other application to bypass frp like crack z3x samsung tool 29.5, frp tool pro, frp hijacker, etc that supports g930f/fd.
11. Perform factory data reset under settings and after that try to perform wipe data/factory data reset thru recovery mode and wipe cache
12. Turn off your phone
13. Go to download mode. Press and hold at the same time (vol.down+home button+power button)
14. Check if the rhe FRP status was turn off
15. Flash your stock firmware.
Once you flashed your firmware successful. You will encounter an error about dm verity verification.
You just need to flash twrp 3.2.0.4 and install the disable dm verity zip file. Or you can just search to google if you want. I dont have enough time to upload the files but if i have free time. I will update this thread
In case of error try to repeat.
Do at your own risk. I have no responsibility if you brick your phone. Thou it was already brick hehehe just kidding
Im just here helping to share the method ive found thru searching the web.
It works for me.
You can also donate if you find this tutorial is helpful
Btc: 38DqbW3KppDGQWnqVh3qT9nCZQKNCBCSes
Eth: 0x99aaed9c3fb9b1ba0626a8ffec618cad06c18153
Credits to all the owners of the links ive provided
Lìnks:
http://q.gs/E7Ha9
http://q.gs/E7KKJ
Click to expand...
Click to collapse
I have G935F Binary 2, I follow the same steps > after reset phone > frp lock still ON.
What's wrong?

mofazar said:
I have G935F Binary 2, I follow the same steps > after reset phone > frp lock still ON.
What's wrong?
Click to expand...
Click to collapse
Did you root your phone using kingroot thru apk installer?

LineArc said:
Thank you for your help but I got mine repaired. A guy shared a link with me which I flashed with Odin it was a full firmware and surprisingly it did not get any error this time.
But still thank you
Click to expand...
Click to collapse
Any chance you can send me the link i really need a combination rom for my G930F binary 2 but the only ones around are for AP SWREV B:1 and the only one i have for B:2 binary is not booting at all and i need to fix my imei number like yesterday i would really appreciate any help if you can.
The flash error you are experienceing device 2 binary 1 is because your S7 now uses the march 2018 update and now bootloaders have gone from U1 to U2 firmware and hence a U1 bootloader or firmware can no longer be flashed due to an Efuse that blows to prevent a downgrade you can check this out on sammobile check the firmware number from the release before march 2018 they will say G930FXXU1DRBE for an example but the march firmwares onwards use G930FXXU2DRBE for example.
Thanks
Matthew from australia

Matty1993 said:
Any chance you can send me the link i really need a combination rom for my G930F binary 2 but the only ones around are for AP SWREV B:1 and the only one i have for B:2 binary is not booting at all and i need to fix my imei number like yesterday i would really appreciate any help if you can.
The flash error you are experienceing device 2 binary 1 is because your S7 now uses the march 2018 update and now bootloaders have gone from U1 to U2 firmware and hence a U1 bootloader or firmware can no longer be flashed due to an Efuse that blows to prevent a downgrade you can check this out on sammobile check the firmware number from the release before march 2018 they will say G930FXXU1DRBE for an example but the march firmwares onwards use G930FXXU2DRBE for example.
Thanks
Matthew from australia
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=890129502657580764
This is the link that got mine repaired. Hope it is of any help for you. Mine is totally fine with Oreo running on it.

kripto00 said:
Did you root your phone using kingroot thru apk installer?
Click to expand...
Click to collapse
Yes exactely as it explain.
But I found an another way
---------- Post added at 06:17 PM ---------- Previous post was at 06:05 PM ----------
If someone need it, this is way for me to fix DRK error U2 FRP Lock ON.
-Flash: Combination U2, let phone power on, then power off and boot to download mode
-Flash Stock Rom U2: Pit _ AP _ BL (Tick Erase Nand) with Odin
-Phone will force boot into recovery but will fail.
-Extract "Recovery.img _ Cache.img" from Stock Rom U2 > Recompil 2 files on .tar file.
-Flash the .tar file (odin)
-Remove FRP UFS usign Z3x, it will Done
-Flash Full Stock Rom U2
-Repair DRK by Root phone (Z3x)
-Done
It may be poorly explained but it helped me a lot. And I hope someone else could explain it better.

LineArc said:
https://androidfilehost.com/?fid=890129502657580764
This is the link that got mine repaired. Hope it is of any help for you. Mine is totally fine with Oreo running on it.
Click to expand...
Click to collapse
Thanks mate ive only just seen this now ill download it and give it a crack be interested to know if it actually works or not i did manage to restore my imei with my TWRP back up had to wait weeks for it but would be interesting to see what factory apps are pre installed on that version as to the other model samsung factory binarys, i have a new S8 now so the 7 has now become my new dummy tester

I soft bricked my over a year ago and would like to get it working again.

From what I remember it had TWRP on it, I had it rooted on stock image for a while. Got absolutely fed up with their software and tried to install a stock android rom on it. Got through a few that wouldn't load properly so went to go back to a stock rom and it's stuck in a bootloop now. I've never been able to get into recovery no matter what button combo. It goes to the yellow text page then reboots. Not matter what combo of buttons i push.
Not really sure what to look for or what to do beyond this point as most help i've found has been guided to get into recovery. The most I've been able to get is this basically a downward facing parentheses with a small circle that appears and runs through it.

Can you get into fastboot? - Turn it off, connect USB and hold power and vol -
If yes, its easy to fix. Or you can try going to eRecovery and Format all data and download latest software.

Just tried. That would be a yes.

bump.

Did you fix it or you still need help? If yes, what version of android were you using? Do you have an sd card you can use to install stock firmware?
The point is, we need to get you running on oreo, after that is everything ez. There is probably no way of getting oreo other way than using hisuite, but I dont know. For hisuite. To make hisuite show oreo update, you need to get latest nougat running on your phone. It should be ez with twrp. You can use firmware finder on windows or other phone to download proper full ota update and flash trough twrp. If anything, feel free to ask me here.

Still stuck at the fastboot option. I don't really remember what version it was. Whatever it was exactly 1 year ago is all I can remember. I don't think it was oreo though?
I can't use TWRP though, as I said, I can't get into any recovery stock or TWRP, only fastboot.

delete

Spykez0129 said:
Still stuck at the fastboot option. I don't really remember what version it was. Whatever it was exactly 1 year ago is all I can remember. I don't think it was oreo though?
I can't use TWRP though, as I said, I can't get into any recovery stock or TWRP, only fastboot.
Click to expand...
Click to collapse
Did you tried Dload? It should work. Download latest nougat for your device from firmware finder and flash it with Dload.
EDIT: If fastboot works, just download latest twrp for nougat and flash it. After that just downlaod stock nougat and flash trough twrp.

PremiumBlaze said:
Are you able to flash anything in fastboot like the stock recovery?
Does fastboot say that the phone is unlocked?
Does fastboot say that FRP is unlocked?
Click to expand...
Click to collapse
Says both are unlocked. I flashed the latest recovery (for nougat) to it and both said ok.
Then I did fastboot reboot recovery command and it says OKAY on the sending, but under "booting" it says FAILED. Command not allowed?
Can't manually boot into twrp either, phone stays stuck on your device is booting now.

delete