i took in my hands this tablet, (a gift from a friend but maybe was a curse :crying and after a while finally turned on.
i install some apps for know the specs, then search, then investigate models, then i get crazy.
well, now what?, in my research, i get to this tablet, maybe is a clone. the names are freaking me out. there is no stick or anything to named the tablet, only in behind say, "infotmic, android 2.3, DDRII 512MB, Hard Disk 4GB"
how can i know if mi tablet is original or fake?, there are a several numbers, models and names, flytouch, superpad, eken, infotmic
this is what i have.
in the tablet, 1 headpones, 2 usb (not miniusb), 1 tfcard, 1 hdmi, 1 network and 1 for dc. 1 reset (this dont work at all)
in settings/about device:
Model Number: P001 RTL8188-20111206
Android Version: 2.3.3
Baseband Version: Unknown
Kernel version: 2.6.35.7-infoTM, [email protected]#79
Buid Number: GRI40
whit some apps i found this:
model-m799ca
brand-infotmic
cpu hardware: infotmic imapx200 800mhz
tablet tipe: mid / apad m7206 (m799ca)
cpu model-armv6 compatible processor rev 5 (v6l)
cpu frequency-791,34
CPU implementer : 0x41
CPU architecture: 6TEJ
CPU variant : 0x1
CPU part : 0xb36
CPU revision : 5
screen resolution-1024x600
screen size: in here say 7, but physically is 10 inches
gpu vendor-Vivante corporation
gpu renderer-GC600 graphics engine
3d graphics engine 40nm, 315mhz, ScalarMorphic (TM) architecture, Vertex Rate: 157.5 vert/s
ram size-437,9 mb of 512mb
sd cart size-2638,6 mb
sd card ext.-14972 mb
android version-2.3.3
build number-GRI40
Imei-xxxxxxxxxxxx
kernel [email protected] (gcc version 4.4.0)#79 tue dec 27 20011
im almost secure, is just like almost the same of the page chinaphonehouse (dot) org.... under the name: Flytouch3 / Superpad III version 2012
led is green when is turned on, and red when is charging. 9 volts.
so, what i have?, an original,? o fake? what firmware i need?
i really, really sorry if all of you can´t understand me, thats because im a spanish user, and all of this was writte with google translator and my understand of english.
i feel in several ways full pleased, if someone can get me the link of a firmware for my tablet.
thanks for everyone, even if you can help me or not.
JustUP
hi, everybody.....
for my question, any hep?
thanks.
radamantis2707 said:
hi, everybody.....
for my question, any hep?
thanks.
Click to expand...
Click to collapse
hi i got the jay tech 799 tablet, but it hangs on ANDROID_ boot-screen
do u have any firmware for it ???
In the tablet are two buttons together
If you click the power of button and click the button (H)
repeatly it goona send you to recovery mode from there reset the tablet
Hey guys, I've got a new cs918 (It worked and connected great to my tv when I got it) and I've flashed it successfully to the Hybrid firmware ( http://forum.xda-developers.com/showthread.php?t=2395195 ).
The device now will power up (red light on the back and blue on start button) but it wont show any signal on any tv I plug it in to.
What can I do?
Model - CS918
Processer - RK3188T Quad-core Cortex A9 1.4GHz
Memory-2GB DDR3
GPU-Quad-core Mali-400
Thank you very much!
Hello
I recently purchased a Ramos X10F on an impulse buy on a trip to the PP last month. I had been waiting longer than a year for an 8" 4:3 device that was not Apple with expandable memory and this one just made me succumb. Also I fell for the false data in marketing it as a cortex A9 and I thought a quad core A9 should be faster than my dual core A9 in the n7000. Actually it is a A5 or A7 (device details in cpuz mention some A7 blah).
The device has great potential to be an ipad mini killer (at $165) as the hardware fit and finish is very good, the screen is IPS and it weighs only 360 grams. I can hold it in one had lying in bed without tiring myself. However performance is marred by the stock android 4.1.1. Intially I thought it was slow nand flash as when I enabled cpu stats, the nand-rw-flash process appeared to be the top process for a longish time, each time it stalled. However I later discovered, the device is very laggy when Wifi is on while actual WiFi throughput is very good - I get almost full speed 16mbs in the speedtest.net results. Unfortunately even with entropy seeder and a deadline or noop scheduler, the lagginess is only partially improved. Also the old linux/android decision of using input to randomize and seed the entropy is only good for desktops not servers or touchpads. I have to tap a few times to get a app screen to respond inexplicably and suddenly and it shows that the OS was waiting on input. The device is best for streaming as typically once the app is opened I never have a problem with lag a it is typically 15 to 30 mins of viewing before switching apps. Otherwise the poor performance means a task that should take normal time (like reading news in the morning for 15 mins) takes more than twice the time as I have to struggle with the slow app launches and screen loading mostly. But if Wifi is switched off and content is cached, everything is smooth and much better. Battery life is decent with display brightness set around or below 10% typically.
So my recommendation for a new buyer is - dont buy until a custom ROM is made available. Dont fall for the x10pro video on the utube yet. Real world performance is not the same. Once the smoothness of the 4.4.x is acheived it will be a killer product. (It is not a weak cpu either, it is responsive and smooth with wifi off. Although the chip does not support out-of-order execution)
I would like to upgrade the android from its 4.1.1 to a 4.4.x version. Also this version is vulnerable to heartbleed and the openssl bug that came after that in June 2014. The omnirom 4.4.3 on my n7000 is really smooth and I am hoping somebody will develop a custom rom for this device.
But I dont see a custom ROM or CWM for this anywhere. I installed a CWM recovery for another ATM7029 device (yarvik) and it boots, but I forgot about the display driver compatibility and I can no longer view the menu in recovery mode. Otherwise rooted it and running ok.
The specifications of the device are as follows:
OS: Android 4.1.1
CPU: Quad Core ATM7029
GPU: Vivante GC1000
RAM 1GB，DDR3 --> False. Real RAM is 686MB.
Storage 8GB
Screen: Capacitive Touchscreen, 1024*768 Full resolution Screen
Size: 7.85 inch
Resolution: 1024*768 Pixels
Flash: Support Flash 11.0 and HTML 5
Extend Card Support TF card up to 32GB extended
Camera Dual Camera Front 2.0M,Back 5.0M
Gravity Sensor Yes
Multi-Touch Yes, 5 points touch
Android Market Yes
Skype Yes
Email and Browser: Yes, built in
WIFI: Yes, 802.11 b/g/n
3G : support external 3G dongle
OTG Function: Support USB Mouse,Keyboard (2.4GHz)
Support:FAT,FAT32,NTFS
Earphone Interface 3.5mm
Battery: 4000mAh
Link to the device blurb: http://www.ramos-tablet.com/ramos-x...et-mini-7-85-inch-screen-dual-camera-16g.html
What do I need to submit for a developer to build a custom rom for this device? Some kind of dump? Also need a recovery manager with the right display driver. Either TWRP or CWM.
I hope a developer will volunteer.
Thanks
G0bble
I have an Android Head Unit on my Corolla 2014. Everything seems to work fine except for the echo during a call. Whenever I get a call or place a call the person on the other end hears his voice clearly as if he is talking to himself. It feels like there is a three way call. Anyway I can get rid of this ****ty bug? I really like my unit but this keeps buggng me.
Here is my Unit's Spec:
CPU: Rockchip PX5 Octa-Core, 64-Bit Cortex A53
RAM: 2GB
MCU: 2.4.4 HA - Dasaita
ROM: Malaysk ROM v2.0 (PX5 MTCD)
MIC: External Mic
If you need any info to give feel free to ask.
I appreciate any help you give me.
alukarulz said:
I have an Android Head Unit on my Corolla 2014. Everything seems to work fine except for the echo during a call. Whenever I get a call or place a call the person on the other end hears his voice clearly as if he is talking to himself. It feels like there is a three way call. Anyway I can get rid of this ****ty bug? I really like my unit but this keeps buggng me.
Here is my Unit's Spec:
CPU: Rockchip PX5 Octa-Core, 64-Bit Cortex A53
RAM: 2GB
MCU: 2.4.4 HA - Dasaita
ROM: Malaysk ROM v2.0 (PX5 MTCD)
MIC: External Mic
If you need any info to give feel free to ask.
I appreciate any help you give me.
Click to expand...
Click to collapse
Upgrade to the last mcu and firmware Dasaita
https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
the latest PX5 firmware 2.75 and 6.0 upgrade ha (20171214),the situation was not senile,but the firmware from ROM Malaysk B6.2 has slightly changed the situation
hello guys, sorry for my englisch i have a problem with my radio. the problem is, after the hardware and MCU (KGL) Update is my button LED lights off the radio not working.
in darknight i see the touchscreen but not the buttons lights and i hope that you guys can fix my problem
in factory setting is not a problem i think the problem is by the MCU update
this is the details off my radio
ERISIN 6508TDE
8 core 64bit CPU Cortex A53 @ 1.5G
2GB RAM
there a bought my radio this is the link
http://www.ebay.de/itm/7-Android-6-...686901?hash=item237f7bfab5:g:~PIAAOSw~AVYva4y
i hope you all can help me thanks.
I get today a new can Bus adapter from the seller but the LED from the bottom not work .
Please i need seriously help