i took in my hands this tablet, (a gift from a friend but maybe was a curse :crying and after a while finally turned on.
i install some apps for know the specs, then search, then investigate models, then i get crazy.
well, now what?, in my research, i get to this tablet, maybe is a clone. the names are freaking me out. there is no stick or anything to named the tablet, only in behind say, "infotmic, android 2.3, DDRII 512MB, Hard Disk 4GB"
how can i know if mi tablet is original or fake?, there are a several numbers, models and names, flytouch, superpad, eken, infotmic
this is what i have.
in the tablet, 1 headpones, 2 usb (not miniusb), 1 tfcard, 1 hdmi, 1 network and 1 for dc. 1 reset (this dont work at all)
in settings/about device:
Model Number: P001 RTL8188-20111206
Android Version: 2.3.3
Baseband Version: Unknown
Kernel version: 2.6.35.7-infoTM, [email protected]#79
Buid Number: GRI40
whit some apps i found this:
model-m799ca
brand-infotmic
cpu hardware: infotmic imapx200 800mhz
tablet tipe: mid / apad m7206 (m799ca)
cpu model-armv6 compatible processor rev 5 (v6l)
cpu frequency-791,34
CPU implementer : 0x41
CPU architecture: 6TEJ
CPU variant : 0x1
CPU part : 0xb36
CPU revision : 5
screen resolution-1024x600
screen size: in here say 7, but physically is 10 inches
gpu vendor-Vivante corporation
gpu renderer-GC600 graphics engine
3d graphics engine 40nm, 315mhz, ScalarMorphic (TM) architecture, Vertex Rate: 157.5 vert/s
ram size-437,9 mb of 512mb
sd cart size-2638,6 mb
sd card ext.-14972 mb
android version-2.3.3
build number-GRI40
Imei-xxxxxxxxxxxx
kernel [email protected] (gcc version 4.4.0)#79 tue dec 27 20011
im almost secure, is just like almost the same of the page chinaphonehouse (dot) org.... under the name: Flytouch3 / Superpad III version 2012
led is green when is turned on, and red when is charging. 9 volts.
so, what i have?, an original,? o fake? what firmware i need?
i really, really sorry if all of you can´t understand me, thats because im a spanish user, and all of this was writte with google translator and my understand of english.
i feel in several ways full pleased, if someone can get me the link of a firmware for my tablet.
thanks for everyone, even if you can help me or not.
JustUP
hi, everybody.....
for my question, any hep?
thanks.
radamantis2707 said:
hi, everybody.....
for my question, any hep?
thanks.
Click to expand...
Click to collapse
hi i got the jay tech 799 tablet, but it hangs on ANDROID_ boot-screen
do u have any firmware for it ???
In the tablet are two buttons together
If you click the power of button and click the button (H)
repeatly it goona send you to recovery mode from there reset the tablet
Hi! I have a 7 inch tablet Brand: Merlyn,Version OS: Android 4.0 (ICS),Procesor:Cortex-A10,CPU: 1.2GHz Boxchip A10,RAM: 512DDR,8GB,Rezolutin:800x480,Touch Screen: 5 Point Touch Capacitive,HDMI,Bluetooth: No,G-Sensor: Yes,WebCam: Front 0.3M Pixel;Back 0.3M Pixel,GPS : No,WiFi: IEEE 802.11b/g/n,3G: with modem 3G USB,Card Reader: TF Card (MicroSD) up to 32,Batery: 3.7V 3000mAh Li-ion and my problem is with the software.He use to be stable but at one point it got stuck at loading screen so i tried reset but got no results.So i tried to find another software for him but i am noob and i forgot to save the original software and the closest i got to one working is from allview alldro but the touch dosent work right.I tried for so long and got no result.Can anyone pls help me ?(sorry for my bad english)
Anyone?
Anyone?
hi guys ! i need help my energy phone pro qi went off after being completely discharged and now it's stuck in a bootloop; not the familiar one but it starts as if it was going to charge but doesn't and keeps restarting again and again ; i didn't try to flash a rom or anything else it's running a stock android 4.4.2 kitkat version and rooted ; need help pls
Smartphone with optimized ANDROID™ 4.4 O.S.
Octa Core ARM Cortex A7 1.7GHz processor and Mali-450 GPU.
5.0" capacitive OGS IPS (Full HD
1920x1080p) touch screen with Dragontrail glass.
Front frame and structure in aluminum.
32GB internal memory.
2GB RAM.
5Mpx FOV 88º front camera with flash and 13Mpx rear camera with Auto-Focus and double flash for video calls, photos and Full HD videos.
Integrated wireless charging module (Qi standard).
3G: 3G function to be online 24/7.
Satellite-based GPS function for the most reliable and precise navigation.
WI-FI N: 802.11 b/g/n for an ultra-fast internet connection.
NFC + BLUETOOTH: Ultra-fast wireless connection for headphones, speakers and other NFC or Bluetooth 4.0 devices.
MHL connection for content playback on your TV or monitor without HDMI cables.
Dual microSIM-card slot for your free choice of mobile operator.
Hi there,
I'm sorry but I have not found anything related to your question/device, so you must start asking in one of this Q&A forum:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
or
> General discussion > Questions and Answers
Good luck
Hi tkx buddy i've finally found a way to restart it and now its working fine ! i took a risk but it worked ; tkx for your support !
Glad to hear that.
Tace care and do a backup always before doing any changes.
Thread closed.
ZOJI Z7 4G Smartphone 5.0 inch Corning Gorilla Glass Screen Android 6.0 MTK6737 Quad Core 1.3GHz 2GB RAM 16GB ROM IP68 Waterproof Fingerprint Scanner Metal Frame
Display: 5.0 inch, 1280 x 720 Pixel HD 2.5D Arc Corning Gorilla Glass screen
CPU: MTK6737 Quad Core 1.3GHz
System: Android 6.0
RAM + ROM: 2GB RAM + 16GB ROM
Camera: 2.0MP ( SW 5.0MP ) front camera + 8.0MP ( SW 13.0MP ) back camera
Sensor: Gravity Sensor, Light Sensor, Proximity Sensor
SIM Card: dual SIM dual standby. Micro SIM + Nano SIM
Feature: GPS, A-GPS
Bluetooth: 4.0
Network:
2G: GSM 850/900/1800/1900MHz
3G: WCDMA 900/2100MHz
4G: FDD-LTE 800/1800/2100/2600MHz
ported twrpt 3.0.2 from twrp by jemmini
http://www.mediafire.com/file/8n1q04cm5hq9b3o/recovery.img
rom rooted with tweaks and init.d, zoji-z7_20170525
https://mega.nz/#!fFAiWZ7C!DXwujo1g711bN81CBJhXwwnG-N2qK5k-SZaJCpPfA2s
Root
split52 said:
ZOJI Z7 4G Smartphone 5.0 inch Corning Gorilla Glass Screen Android 6.0 MTK6737 Quad Core 1.3GHz 2GB RAM 16GB ROM IP68 Waterproof Fingerprint Scanner Metal Frame
Display: 5.0 inch, 1280 x 720 Pixel HD 2.5D Arc Corning Gorilla Glass screen
CPU: MTK6737 Quad Core 1.3GHz
System: Android 6.0
RAM + ROM: 2GB RAM + 16GB ROM
Camera: 2.0MP ( SW 5.0MP ) front camera + 8.0MP ( SW 13.0MP ) back camera
Sensor: Gravity Sensor, Light Sensor, Proximity Sensor
SIM Card: dual SIM dual standby. Micro SIM + Nano SIM
Feature: GPS, A-GPS
Bluetooth: 4.0
Network:
2G: GSM 850/900/1800/1900MHz
3G: WCDMA 900/2100MHz
4G: FDD-LTE 800/1800/2100/2600MHz
ported twrpt 3.0.2 from twrp by jemmini
Click to expand...
Click to collapse
Hi there, I'm wondering how to root my Zoji Z7. I have tried all OneClickRoot apps from XDA and none working for me . Please help
GPS does not work when phone is charging
HI,
my GPS works very well when ZOJI Z7 is on the battery. When phone is charging (on the motorcycle), sattelites are immediately lost and GPS is useless. Does anybody else have simmilar problem with GPS during charging?? I have tried all possible ways of charging (wall charger, power bank, car USB charger, motorcycle charger), but the result is always same - GPS is useless (signal is lost). I have used APPs: maps.me, waze, HERE, mapy.cz, google maps. When phone is charged, navigation apps are lost and not usable.
my video:
I can not add link to youtube, so find it on youtube. Video is called "HOMTOM ZOJI Z7: bad GPS experience ("
Thanks for your help,
ludek
Hello,
The other day it went out, I guess because the battery runs out, and since then it does not work.
It does not react when plugging in the charger, the only "life" sample is sometimes a small vibration when unplugging the charger by holding down the power button.
SOLVED
https://4pda.ru/forum/index.php?showtopic=825309&st=80 POST Nº 90
1) Connect the phone to the charging and simultaneously press the power button for 10 seconds, then Disconnect the phone from charging and reconnect it to charging, it usually turns on in this way;
Or
2) press the power button for about 40 seconds, and insert the charging cable to charge it for more than half an hour, then you need to enter the recovery mode (the volume button "+" and the phone's power button at the same time - you need to come in to restart!
Android 7 nougat and spflashtools:
https://www.needrom.com/download/zoji-z7-7-0/
https://cloud.mail.ru/public/DmF2/tsUfJ1CyV
You can replace the image recovery with the TWRP by jemmini
http://www.mediafire.com/file/8n1q04cm5hq9b3o/recovery.img
and flash it all together, and then you can to install latest supersu zip to root it.
http://www.supersu.com/download
Remember to backup before.
If you miss the IMEI ....
IMEI:
Reset IMEI with SN Write Tool: RECOMMENDED. And fix NVRAM WARNING err 0X10 or 0x02
Download:
https://www.needrom.com/download/sn-writetool-v2-1416-00/
Ttorial:
http://adnaplays.blogspot.com.es/2016/10/fully-guide-for-root-permanent-fix.html?m=1
Read from "FIX IMEI AND NVRAM"
The "BPLGUInfoCustomAppSrcP" file and the "APDB" file are output from the same ROM you installed
Reset IMEI with Maui Meta:
https://www.needrom.com/download/maui-meta-3g-ver-7-1444-0-0/
https://forum.hovatek.com/thread-12328.html
Dont like ZOJI, not good
Rooten and GPS of HOMTOM Zoji Z7
Hi
Has anyone already rooted his Zoji Z7? GPS is super bad! How to contact the manufacturer?
Thanks for your help.
This phone has two recorerys.
One in Chinese: turning it on with a vol-button at the same time as power-on. To restart use the option below.
Another one in English: button vol + at the same time as power on, you will get a small menu that you move with vol + and apply with vol-.
This is the one you can change by TWRP. The other, Chinese, remains.
If you put TWRP and try to do factori reset from the android system will not work again, you can only enter the recorvery and you will have to flash again from the computer with flashtool.
ported twrpt 3.0.2 from twrp by jemmini
http://www.mediafire.com/file/8n1q04cm5hq9b3o/recovery.img
First I installed TWRP, I made backup. When trying to restore the nvram and nvdata after installing andrid 7 nougat does not boot the android. The fixed start screen remains.
Possible Virus in Zoji Z7 ROM 1.1.2 0525
There seems to be a Adserving virus in Turbo Battery app. Test using Kaspersky. Check for presence - settings/apps/show system.
Look for Turbo Battery. I wonder if any other Z7 owners can check for this
In the forum 4pda talk about this, the viruses.
https://4pda.ru/forum/index.php?showtopic=825309&st=480
I put Android 7 nougat, much more fluid, and clean virus, without apps and annoying advertisements
Zoji virus
Thanks lots of good info there. Z7 is a good bit of kit lcd usable outdoors, OTG, waterproofish etc. I have tried for a week or so to get Zoji support to admit to a virus! Where does the Android 7 come from is it leaked from Zoji? btw just disable Turbo Battery to stop the ads at 1.1.2.
Use *#*#12306#*#* to reset IMEI
or use
QuickShortCutMaker activities/engineer mode and select IMEI icon.
smarthousesys said:
Thanks lots of good info there. Z7 is a good bit of kit lcd usable outdoors, OTG, waterproofish etc. I have tried for a week or so to get Zoji support to admit to a virus! Where does the Android 7 come from is it leaked from Zoji? btw just disable Turbo Battery to stop the ads at 1.1.2.
Click to expand...
Click to collapse
I think the rom android nougat for zoji z7 is official
https://www.needrom.com/download/zoji-z7-7-0/
On your Android 7 I cannot see any way to control the upper left indicator red/green/blue LED.
Not sure if GPS works properly at this level ( has the does not work while charging error). Hints appreciated. Cheers
I too have just received my Z7 and have found the battery to drain way to quickly on closure inspection I found the aforementioned Turbo Battery app which has indeed got adware buried inside, nasty trick hey. Has anyone rooted this device as yet ? if so details would be fantastic and much appreciated
Disable MI keyboard and Turbo battery (both are system apps) After that the phone is really excellent good battery life can read display in sunlight (just about) etc. Have contacted Zoji and Homtom on this and found them useless. They have said they might fix it but don't live in any hope.
Has anyone rooted this device as yet ? if so details would be fantastic and much appreciated[/QUOTE]
First install TWRP and then you can install supersu zip
Hi, i have a z7 who is broken, after flashtool the flash is stopped. Now i can't flash it again, is there a solution?
Windows don't recognize the device anymore. thanks
Hi People first time here and wonding if you could help me restore my unit
iv seem to messed my unit up but got the unit back working but the dpi is not right everything is bigger now.
this is my unit
------------------
Operation Systemure Android 8.0.0 System
CPU Model:RK-PX5 1.5GHz Cortex A53 8-Core
RAM:4GB DDR3
Internal Memory:32GB
Display
Capacitive Touch Screen
Screen Resolution: 1024*600
Multi-Touch: Yes, 5 Points
GPU Version: OpenGL ES 2.0
-------------------
this was the version i had below
MTCE_CHS_V2.76_1.rar
now iv got MTCE_CHS_V2.75 so iv ended up downgrading it. does the affect the display dpi?
i did find the files from yad i. sk / d/ umCvHqCDzHccr which got my unit back working again, i found the link on this site. but just need help with the display
if anyone has the files to update the unit to the latest version please share
sorry am new to forums