Hi guys out there! I just registered on XDA forums a couple of days before hoping to get some help to my problem. I bought a cheap tablet last year. It is teracom tz200.Right from the day of buying it, i noticed a wierd thing on it. The battery started to drop 1% for each 10 seconds(100%-99% FOR THE FIRST 10 SECS. AND 99%-98% FOR THE NEXT 10 SECS.) and after some time the tablet would shut down of low battery(0%). I thoght that the problem was with the battery and replaced the battery of the tablet with two mobile phone batteries of 3000Mah (the original battery was too 3000Mah). But after replacing the battery i started to notice something more weird! The battery started to drop 1% for each 8 secs. and would shut down at 0%.But this time i figured out a new thing.After the tablet has shut down, i will leave it for rest for 10min. when i switched on the tablet again(after 10 mins. of rest after shutting down due to low battery)it would switch on and start to drop 1% for 8secs. (as i mentioned before) and shut down again at 0%.Like this i can use it for 10-11 times(SWITCHING ON THE TAB AFTER IT SHUTS DOWN DUE TO LOW BATTERY) each session lasting for about only 13 - 15 mins. I went through many articles online, they said improper calibration of battery(the batterystats.bin file) could cause this.So i rooted it and made my way to the batterystats.bin file, deleted it but of no use, the same condition prevailed even after doing that(I ALSO USED THE BATTERY CALIBRATION APP).So can any one guide me through a way to get my tablet fixed?I rooted it and flashed CWM recovery and i have a rom backup.So i would be pleased if anyone can find a ROM for it so i can flash it to check whether the problem is solved.The details of the tablet are:
MAKE TERACOM
MODEL TZ200
OS Android ICS 4.0.4
CPU 3 core 1.2 ghz cortex A8
RAM 512 MB DDRIII
DISPLAY 7" 800*480 5 POINT TOUCH
CAMERA FRONT 0.3 MP
ID IMM76D
BATTERY 3000mah
INTERNEL MEMORY 4GB
KERNEL 3.0.8+ [email protected]#293
BOARD ROCKCHIP RK29
BUILD NO. ROCKCHIP RK29SDK-ENG 4.0.4_20120811
3G DONGLE SUPPORTED
WIFI,WIFI HOTSPOT
HDMI PORT
SD CARD UPTO 32GB
OTG CABLE SUPPORTING USB KEYBOARD,MOUSE AND DONGLES
GOOGLE MAPS AND TALK
There is no system update option in my tab settings. But i notice a service called rkupdate service running in the background.I havent connected the tab to internet else.There is another tablet BSNL PENTA IS701c with the same specs of my tab. Idownloaded a rom for the penta tablet and tried to flash it via CWM but it failed. Can any one provide me a rom for the tablet with above specs. It can be .zip or .img file.Please help!!!!!!!!!!
Hi,
I can't find anything relevant on XDA for your device and issue, so you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
I recently brought a cheap android tablet (JLAB PRO-7) from Staples on Black Friday. Has anyone flashed a rom or did anything with this particular tablet?
I tried rooting it even though it came partly rooted and now evey time it is cut off or it reboots it is back to as if it came straight out the box. Do any one have any idea on a fix for this?
PRODUCT DETAILS
Basic Tablet Offers Reliable Internet and Email
The Jlab 7-Inch Tablet comes with 8GB of storage, plus an expansion slot for an addition 32GB of microSD memory. It uses a dual-core Cortex A7 1.2 GHz Processor and 512MB RAM. The .3 MP front-facing camera makes video chats easy, and integrated speakers provide clear sound for voice, video, or music. The tablet runs on a rechargeable lithium battery, which lasts 3 to 4 hours on a full charge.
Allwinner Boxchip A23 Dual Core Cortex A7 1.2GHz Processor
7” display, 1024 x 600 resolution
512MB DDR3 system memory
8GB with micro SD slot for up to 32GB additional storage
Webcam: 0.3MP Front Facing Camera
Integrated speakers
XP/Vista/Win7/Win8 & Mac OS 10.4 or later
Android™ 4.4 KitKat
Handles Movies, Music, and Email All in One Place
Watch movies in widescreen format, listen to your favorite songs, surf the web, and check email, all from one device. A microSD expansion slot supports up to 32GB of additional storage.
Front-Facing Camera for Video Calls
The front-facing 0.3 MP camera and integrated speakers make video calls easy.
Package Contents
JLab Pro-7 7-Inch Tablet, 8GB (JLAB PRO-7), charger, and user manual.
SPECIFICATIONS
Tablet Screen Size (Inches) 7
Tablet Resolution 1024 x 600
Tablet Processor Details Allwinner Boxchip A23 Dual Core Cortex
Tablet Processor Speed 1.2GHz
Tablet Memory Size Details 8GB
Tablet Memory Expandable 32GB (w/ Micros SD slot)
Tablet RAM 512MB DDR3
Tablet Operating System Android
Audio Details Integrated Speakers
Camera 0.3MP Front Facing Camera
Battery Life Filter 3-4 hours
Battery 2400mAh Li-Polymer Battery
Glad someone else is looking to root JLAB also!
I am desperately looking for info on this also. You left out the biggest surprise and annoyance with this low-end tablet...NO ABILITY TO MOVE APPS TO THE SD CARD!!! This thing is running 4.4.2 for Chris sake! After OS install, you only have 5GB internal memory. I put a 32GB card on it in order to shuffle off the app memory hogs and I can't even use it!!! <calming down...>
As a result, I get "insufficient memory available" errors for many programs. And some won't even consider the tablet for install. I know you get what you pay for, but the specs on this thing aren't awful. It just needs a decent OS on it. I tried loading into the bootloader once and almost bricked it. When rebooted, the "JLAB" opening screen came up and just stayed there...forever. I finally had to leave it on overnight to completely run down the battery to get it back from the abyss.
Please, if anyone has this thing and is able to put a decent rooted OS on it, post it here. Thank you!
+1 any headway?
I got one for xmas from a friend... I was able to root it with kingo root tool for windows.
I hope this helps.
Make sure debug mode is on in developers options.
To enable this mode clicking the "build number" a few times in system settings.
It rooted my device but i ran into a few issues. First every time the device does a full restart it makes me do the welcome wizard also
(unsure if my defective or not) my wifi signal becomes extremely weak even though i am sitting next to the router.
Kewlz now that we have root all we need is a custom recovery. Id be willing to test out a recovery if someone wants to make one.
I found out the all these cheap tablets are rebraned the manufactor is trio they also sell tablets under their own name.
For the love of God please make a room for this. It's often rebranded please let us know if it works with some other room.
enp82003 said:
I got one for xmas from a friend... I was able to root it with kingo root tool for windows.
I hope this helps.
Make sure debug mode is on in developers options.
To enable this mode clicking the "build number" a few times in system settings.
It rooted my device but i ran into a few issues. First every time the device does a full restart it makes me do the welcome wizard also
(unsure if my defective or not) my wifi signal becomes extremely weak even though i am sitting next to the router.
Click to expand...
Click to collapse
I also rooted my Pro 7 using KingoRoot and am now facing the issue of a factory reset every time the device restarts or powers off/powers on. Were you, or anyone else able to solve this problem? Thanks!
I did not resolve the issue. I returned the thing and got my money back. There are much better options out there then this cheapo thing.
There are definitely better options but it was free on cyber Monday at tiger direct. It will be a decent tablet for my young son if I'm able to get it sorted.
wewantutopia said:
There are definitely better options but it was free on cyber Monday at tiger direct. It will be a decent tablet for my young son if I'm able to get it sorted.
Click to expand...
Click to collapse
I agree with you. But logically it's been a year and these China tablets see no dev love. Unless you know the inners of android OS... I wouldn't suggest it because you will be taking on issues like this alone. ebay the Toshiba Thrive. They are really cheap now and run so much better. If i remember right someone made custom kitkat for it. It's really durable and strong perfect for a kid.
enp82003 said:
I got one for xmas from a friend... I was able to root it with kingo root tool for windows.
I hope this helps.
Make sure debug mode is on in developers options.
To enable this mode clicking the "build number" a few times in system settings.
It rooted my device but i ran into a few issues. First every time the device does a full restart it makes me do the welcome wizard also
(unsure if my defective or not) my wifi signal becomes extremely weak even though i am sitting next to the router.
Click to expand...
Click to collapse
It's been several years since I had an android device but I go the same black friday deal and figured that it would be a great ereader (free). Now I need a little more room so I'm trying to root but both kingo and king root failed for me.. Any ideas? I'm on a mac running windows through a VM but I don't think that is the issue.
Your version is obviously newer as this thread was made last Xmas. As I stated these devices have little to no support so finding a working root would be hard. Your computers os shouldn't matter. If you want an easy root return the device and get a name brand device.
(I wanted to post links to the phone but the system does not let me. If a more experienced user wants to attach them to the thread please send me a PM and I will c/p them to you.)
Specifications:
VK6050S
Chipset
MTK6735 Double card double stay, double 4G, 4nuclear, android 5.1
Band
GSM:850/900/1800/1900 WCDMA:850/900/2100 FDD:800/1800/2100/2600(1/3/7/20)
Cortex
Cortex A53
Cores
Quad core
Size of chipset
28nm
OS
Google Android :5.1
cpu
1.0GHZ
GPU
Mali-T720
size
148*78*9.5mm
OTG
Yes
NFC
NO
Physical Memory size
2G+16G
LCD size
5.5'OGS
LCD Type
IPS
LCD Resolution
HD 1280*720
Type of TP
capacitive Touch Panel (G+F+F)
single/ multi touch
5-points Multi-touch
Camera Resolution (front)
5.0M
Camera Resolution (rear)
13.0M （ov)
BT 5.0\ FM
Yes
battery
6050MAH
Camera Flash LED
Support
WiFi Chipset
MT6735
WiFi (bands and supported protocol)
802.11b/g/n
BANDS
2G Network
GSM/GPRS/EDGE; Frequency:850/900/1800/1900MHz; Data Rates: GPRS/EDGE
3G Network(WCDMA)+TD
WCDMA:850/900/2100
4G Network
Standards：FDD:800/1800/2100/2600
GPRS/EDGE/ HSUPA/Transceiver
GPRS(Class12)/EDGE(Class 12)/ HSUPA+(21M/5.6Mbps)/Transceiver(MT6166v)
Bluetooth(Version)
MT6735(2.402GHZ-2.480GHZ)
FM
MT6735(87.5~108MHz)
GPS
MT6735(1.575GHz)
3D Sensors
All gravity induction
Proximity & Light:
Yes
E-Compass
N/A
Analog TV
N/A
Input and output
I/O Port
Micro USB Port*1 ;SIM Card* 2(W+G);TF Card Por;3.5mm Earphone Jack *1;TF Card Port*1pcs
Mic
Sensitive microphone(Buil-in)
Speaker
1pcs Speaker,
Button
VOL UP, VOL DN, Power
BATTERY
Capacity
6050mAh
Type
chargeable lithium polymer
Charge
Input：AC100-240V.50-60HZ， Output: 5V 2A Mirco 5pin
Standby time
1080hours
Using time
72hours
Charger time
2-3housrs(fast charge)
Operating temperature Range
-10 C to +40 C
Video
MPEG-1, MPEG-2, MPEG-4, H.263, H.264 ,RV , VP6/VP8 , Sorenson Spark ,SP/ASP GMC, XVID, BP/MP/HP, WMV7/8, WMV9/VC1 BP/MP/AP, AVS, JPEG/MJPEG
Audio
MP3,WMA,MP2,OGG,AAC,M4A,MA4,FLAC,APE,3GP,WAV
Image
JPG, JPEG, GIF, BMP, PNG
Accessories
Charger*1pcs;USB Cable*1pcs;User manual*1pcs;Gift box*1pcs;1 *Silicone Case
Does anyone have any experience with vkworld phones?
I ask because I have ordered Ulefone Be Touch 2 three weeks ago and have many concerns about it, the biggest being cheating about the android version.
Since my phone is not yet shipped I was thinking to maybe cancel the order and buy this phone instead. There is a 2GB RAM version, the screen is 720p, it has no fingerprint sensor but the battery is supposedly extremely good (6050 mAh), it claims to have Android 5.1, both SIM slots are 4G-capable and the manufacturer seems to be more serious and established, at least that's the impression I've got.
Has anyone else on this forum ever had a phone from this company and if so, would you recommend it?
Thanks.
I have one on order (the S model). Looking forward to it. It looks very similar to the Bluboo x550 and the iNew L4. I have experience with both.
First thoughts
Ok. I have mine now and have been using it for the last 24 hours.
Background: I have the following chinese phone:
Ecoo E04 3GB
iOcean M6752
Ulefone Be Touch 2
In addition to the above, my teenage son has had the Bluboo X550 which had to be sent back as the sd card reader stopped working. This was replaced with the iNew L4 and the sd card reader just started to display intermittent problems.
The VK6050s looks to be a very similar build to the Bluboo and the iNew with a few cosmetic differences. The configuration of the Sim cards and the SD card are exactly the same - as is the look of the battery albeit the VK6050s claims to be 6050mah, the Bluboo 5300mah and the iNew 5000mah. The vk6050s has 2GB memory compared with the iNew which only has 1GB of ram.
The vk6050s has partitioned it's internal storage into 2 whereas both the other phones make all of the storage available in a single partition.
I have been very impressed with the phone so far. The display is excellent and coming from 5.5" displays with 1080p my eyes can not tell the difference between them and the 720p display on the vk6050s. The ROM is smooth and appears fast (probably helped by the 2GB memory).
I have been able to root the phone. I used the same trick that I had on the Bluboo and the iNew: use KingRoot apk and then use the Replace_Kinguser_with_SuperSU-v1.8 script.
The phone also accepts my 128gb external SD with no issues.
The really good news is that the firmware for the phone can be downloaded from vkworld's website so you can have a play with root etc and still know that you can always go back to the original firmware if it all goes wrong. iNew have yet to publish their firmware.
I have also been able to successfully install the TWRP recovery that was made for the Bluboo (and is available over at needrom.com). It has let me make a backup (although I have not yet tried restoring it). It also let me flash the viper4android zip.
I do worry that it may end up suffering from the same SD card issues that the other 2 phones have. This issue appeared after a week or so. I am keeping everything crossed.
I hope this may be useful to somebody.
i think i will buy this phone insteat of bluboo x550
could anyone test its battery if its real 6050 mah or its just around 5000 like Bluebo ???
i want to buy innos d6000 but its a bit expensive. i only care about battery. if vk6050s has the same battery performance i could buy it.
10 days later and it is still going strong. This is my favourite china phone so far and I have had
Ecoo E04
iOcean M6752
Bluboo X550
iNew L4
Mlais MX Base
Ulefone Be Touch 2
Can you post some camera samples?
Is it any good?
8mpx interpolated to 13mpx?
stapo101 said:
10 days later and it is still going strong. This is my favourite china phone so far and I have had
Ecoo E04
iOcean M6752
Bluboo X550
iNew L4
Mlais MX Base
Ulefone Be Touch 2
Click to expand...
Click to collapse
Nice
From video reviews, seems like enabling the gesture features warns that it will consume more batteries
Does it really effect the battery life by much?
I'm interested too.
suoko said:
Can you post some camera samples?
Is it any good?
8mpx interpolated to 13mpx?
Click to expand...
Click to collapse
I will try and take some decent photo samples and post. I have no way of telling whether the camera is interpolated or not. I googled and couldn't find anything that tells you how to identify the sensor. If you know of how to do this then I am happy to try. I know it is an Omnivison which is pretty typical for this price point. from my experience so far I am very happy with the results.
---------- Post added at 02:28 PM ---------- Previous post was at 02:25 PM ----------
ferbulous said:
Nice
From video reviews, seems like enabling the gesture features warns that it will consume more batteries
Does it really effect the battery life by much?
Click to expand...
Click to collapse
I don't bother using the gestures. I can tell that they work as I have tested them. You've got to think that it will have an effect on the battery as I imagine there is a wakelock at play when using gestures so that the phone is looking out for them, but to be honest, isn't that the beauty of having a phone with a massive battery? You don't have to worry so much about all of the little tweaks like switching off notifications, location settings etc just to squeeze every last bit of power out of it. You can just use th ephone as it' smeant to be used without over worrying about whether it's going to last you the day or not.
stapo101 said:
I will try and take some decent photo samples and post. I have no way of telling whether the camera is interpolated or not. I googled and couldn't find anything that tells you how to identify the sensor. If you know of how to do this then I am happy to try. I know it is an Omnivison which is pretty typical for this price point. from my experience so far I am very happy with the results.
---------- Post added at 02:28 PM ---------- Previous post was at 02:25 PM ----------
I don't bother using the gestures. I can tell that they work as I have tested them. You've got to think that it will have an effect on the battery as I imagine there is a wakelock at play when using gestures so that the phone is looking out for them, but to be honest, isn't that the beauty of having a phone with a massive battery? You don't have to worry so much about all of the little tweaks like switching off notifications, location settings etc just to squeeze every last bit of power out of it. You can just use th ephone as it' smeant to be used without over worrying about whether it's going to last you the day or not.
Click to expand...
Click to collapse
I'm aware of that, just interested to know if it has some minimal effect to the battery life.
On oneplus one I only enabled gesture option for double to wake and camera while the rest are disabled and battery life is still nice with no noticeable battery drain.
stapo101 said:
I have also been able to successfully install the TWRP recovery that was made for the Bluboo (and is available over at needrom.com). It has let me make a backup (although I have not yet tried restoring it). It also let me flash the viper4android zip.
Click to expand...
Click to collapse
Hi, were you able to use xposed tweaks on this?
Since you'll need a custom recovery like TWRP to flash the xposed zip file.
Couldn't find an exposed that would install. The 5.1 is actually a 32bit version even though the soc is 64bit.
vkworld VK6050S (MTK6735,1.0GHz,Quad core, RAM 2GB+ ROM 16GB, Android 5.1, 60...
stapo101 said:
Couldn't find an exposed that would install. The 5.1 is actually a 32bit version even though the soc is 64bit.
Click to expand...
Click to collapse
I wonder how does that work.
So the problem is similar to bluboo x550 then with some users reporting flashing xposed file resulting in bootloop?
Based on this thread
http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
Should we flash the arm zip file or arm64?
stapo101 said:
Couldn't find an exposed that would install. The 5.1 is actually a 32bit version even though the soc is 64bit.
Click to expand...
Click to collapse
No /system/lib64 folder or /system/bin/linker64??
Is this ROM uploaded any where?
Anyway - zip to resize userdata/intsd can be found here - if someone with a VK6050S wants to test.
HypoTurtle said:
No /system/lib64 folder or /system/bin/linker64??
Is this ROM uploaded any where?
Anyway - zip to resize userdata/intsd can be found here - if someone with a VK6050S wants to test.
Click to expand...
Click to collapse
Correct. Neither of those folders or files are present.
Funnily enough I used that same zip to resize the internal partition on another phone the other day and it worked very well. I'm not keen to test it out on the vk6050s yet as I have everything set up as I want it and don't 100% trust the twrp recovery as it was made for the bluboo. I know it works for flashing a zip and have made a backup but have not tried to restore yet.
Also, from what I understand, once the internal partition. Has been resized then you can't do OTA updates. I would rather wait a while to see whether there are any to come.
Besides, I still have over 1gb of internal storage left AND under storage settings it let's you state where you would like new apps to be installed: internal storage, phone storage or SD card.
On a side note, the 2gb of RAM is showing as having 1.3gb still free (with no apps open other than the chrome). Compare this with the ulefone be touch 2 wherr approx 1.9 GB of the 3gb RAM was taken up by the operating system alone. This give you some indication of how well the firmware has been optimised.
stapo101 said:
Correct. Neither of those folders or files are present.
Funnily enough I used that same zip to resize the internal partition on another phone the other day and it worked very well. I'm not keen to test it out on the vk6050s yet as I have everything set up as I want it and don't 100% trust the twrp recovery as it was made for the bluboo. I know it works for flashing a zip and have made a backup but have not tried to restore yet.
Also, from what I understand, once the internal partition. Has been resized then you can't do OTA updates. I would rather wait a while to see whether there are any to come.
Besides, I still have over 1gb of internal storage left AND under storage settings it let's you state where you would like new apps to be installed: internal storage, phone storage or SD card.
On a side note, the 2gb of RAM is showing as having 1.3gb still free (with no apps open other than the chrome). Compare this with the ulefone be touch 2 wherr approx 1.9 GB of the 3gb RAM was taken up by the operating system alone. This give you some indication of how well the firmware has been optimised.
Click to expand...
Click to collapse
Not a problem - I had forgotten about OTA's I'm not 100% sure how they work in terms of the stock recovery but I think the scatter.txt in the OTA's are important - changing this to the new layout should let them install..
Are you sure you can choose where apps are installed directly? It's not just the /sdcard (Android/data; Android/obb etc.) that you are choosing.
Yea 1.3GB free out of 2GB is what I get with 5.0 ROMs (64bit) - Ulefone must be doing something wierd to be usig 1.9GB (swap/zram perhaps??)
HypoTurtle said:
No /system/lib64 folder or /system/bin/linker64??
Is this ROM uploaded any where?
Anyway - zip to resize userdata/intsd can be found here - if someone with a VK6050S wants to test.
Click to expand...
Click to collapse
HypoTurtle said:
Not a problem - I had forgotten about OTA's I'm not 100% sure how they work in terms of the stock recovery but I think the scatter.txt in the OTA's are important - changing this to the new layout should let them install..
Are you sure you can choose where apps are installed directly? It's not just the /sdcard (Android/data; Android/obb etc.) that you are choosing.
Yea 1.3GB free out of 2GB is what I get with 5.0 ROMs (64bit) - Ulefone must be doing something wierd to be usig 1.9GB (swap/zram perhaps??)
Click to expand...
Click to collapse
See attached screenshot...
stapo101 said:
See attached screenshot...
Click to expand...
Click to collapse
Yea, I have that as well - on mine that is just the /sdcard - I still need to manually move apps to external sdcard.
If it is automatic to external then I think typically it's installed to internal first then moved to external so you might find that when you get to ~400MB free internal space you won't be able to install anything else.
stapo101 said:
10 days later and it is still going strong. This is my favourite china phone so far and I have had
Ecoo E04
iOcean M6752
Bluboo X550
iNew L4
Mlais MX Base
Ulefone Be Touch 2
Click to expand...
Click to collapse
hello, i'm alex from italy. i ordered the bluboo.... did i make the wrong choice?
i compared other phones...but i thought the bluboo own the best features..... for example ulefone be touch 2 has BUG BEZELS and higher price, inew only 1gb...
The only one competitor was the VK6050s ( S variant with 2gb) but i thought that the claimed 6000mah was fake and similar to bluboo 5300mah, bluboo calims that they used a BRANDED battery from "amprius". so i would trust more in the true 5300mah instead the 6000mah not sure to be true.
just to say... i've found a new phone, the NEXODUS ZEN which has 2gb ram, 6 inch hd display........ it's really low priced but it uses MTK6589T and android 4.2 but maybe it's more STABLE than a new release 5.1 still not fully known by chinese manufacturer.......
Hello, i have a haier pad d85-w ,but have a problem with operating system,when im turn on tablet he stuck log. And dont loading.
I want to get a Android operating system jelly bean 4,2,2 . Who can help me? Give me more rom,when i can install . Thx. Sorry for mistakes.
Dimensions 200.5 * 135 * 8.4mm
Sensors GPS, Accelerometer
Camera 5 megapixels back; 0.3 megapixels front
Type Tablet Android
Memory DDR 3 1GB
Storage Flash-memory 8GB Micro SD card reader Up to 32GB
Weight 400g
Operating System Google Android ™ 4.2 Jelly Bean
Battery 3.7V/3200mAh
Color White
Communications GSM/GPRS/EDGE (8500/900/1800/1900); HSUPA 11.5 Mbps / HSDPA 42.2 Mbps
Display IPS 7.85" (20cm), 1024*768, 4:3
Processor Media Tek 8389, Quad core [email protected]
Features Wi-Fi IEEE b/g/n ; Bluetooth; 2G/3G; 3.5 mm audio jack; Micro USB;
Battery life Stand-by - up to 100-120 hours; Talk time - up to 5-6 hours;
Warranty Terms 1-year limited hardware warranty. The battery is considered as a consumable part. Due to the natural loss of the battery capacity, there is only a one-year warranty offered on this item.
Hello,
Did you manage to find Firmware ? I have very common issue and I am also lookig for it... Maybe someone knows which firmware I can use as a substitute?
I need this firmware too. my tablet is a Growing GTQ788x but the board have the same reference.
Hello
Needs expert advice in choosing a device. Namely, I work as a driver (TAXI and Uber), I have a standard radio in my car (DVD 800 - OPEL) and a wonderful Galaxy S5 Neo phone, which thanks to you has Android 10 and root. But it's already a few years old, it also has a broken screen and a very swollen battery. That's why my wife decided to buy me a tablet for work and play. However, the Galaxy will get a new battery for now. But I don't want to spend too much money.
My request is that you help choose a "better model".
I will only mention that the Uber (1) and TAXI (2) apps need at least to work;
* Android 5.0 (1), Android 6.0 (2)
* GPS - (the more accurate the better), A-GPS, GLONASS
* Internet connection (* This application typically uses 2 GB of data per month. Using navigation may shorten your phone's battery life - Uber info)
* 2 GB RAM
* SimCard slot (I checked Lenova Tab2 A7-10F on a tablet and it worked but it was about a year ago - the tablet died.)
In addition, the tablet is to be used in the car as a temporary multimedia source, so it should have a "3.5 jack", bluetooth, Wi-Fi.
A SimCard slot would also be nice, especially LTE 4G.
Here are my suggestions:
(I live in Poland, so prices will be in PLN)
My budget: PLN 420
allegro.pl/oferta/tablet-10-1cali-android-9-0-8gb-128gb-dual-sim-9522094216?fromVariant=9522134933
allegro.pl/oferta/tablet-10-1cali-android-9-0-6gb128gb-dual-sim-s9-9438853301
allegro.pl/oferta/tablet-s13-10-1cali-andr-10-0-wifi-8-128gb-dualsim-9484996186
I hesitate between the first and the third.
Thanks