Related
Hi newbie question I'm afraid.
I patched my XD2 with this tool in order for it to talk to my headset. That works fine now.
But I don't understand the timer or battery symbols on the screen now ? How can I get into and change the settings for Bluetooth Tools ?
Also everytime I make a call or receive one bluetooth comes on automatically !
How on earth can I stop it from doing that ? Help appreciated !!!
Hello Ekko Star,
there is a readme file on Towa's web site for this program. Basically the little clock thingamy shows whether or not the bluetooth auto off function is active. If it is white, you will see it slowly turn grey and when it is all all grey, the Bluetooth is turned off.
On the other hand, if you tap it with the stylus, the auto off mode is disabled and the Bluetooth is on all the time (confusingly the clockface is always grey) :? .
The two battery symbols are for two different power profiles. Tap one of the batteries, then set your power setting like you want them (eg display off when on battery etc). Tap the other battery and you can set a a different profile (eg backlight always on etc). You can then swap the two profiles by simply tapping either of the two batteries. I use that when I use the XDA for sat nav, where I want the backlight always on, rather than have to dive into the settings all the time. Neat huh.
Praise goes to Tobias for his help to us all with his BTTools. :wink:
Excellent reply Camstech, Thx a lot mate.
I want to use my TouchPro for tracking a long route i will be travelling shortly. When I turn of my device using the button on top when using a gps tracking-tool, the gps will disconnect and need to search for satellites again after turning on the device.
Does anybody know a trick (maybe in the registry) to keep the GPS alive?
I am also curious about this.
Finally I managed to find this thread!!! I am also facing this problem and was wondering if there was anyway to prevent the GPS from closing and losing connection with satellites when the phone goes into sleep mode. Anyone with any ideas PLEASE HELP!!!
Btw I am using TomTom Navigator 7 with Australian maps...
camielkb said:
I want to use my TouchPro for tracking a long route i will be travelling shortly. When I turn of my device using the button on top when using a gps tracking-tool, the gps will disconnect and need to search for satellites again after turning on the device.
Does anybody know a trick (maybe in the registry) to keep the GPS alive?
Click to expand...
Click to collapse
I seem to recall that TrackyPro has a function which will turn the screen off whilst still tracking the route. Is that the type of thing you're looking for?
Well basically I just want the GPS to still have the lock on the satellites EVEN when the device goes into standby. It's frustrating when after 3 minutes (my settings for power management) the device goes into standby and you realise that the GPS is closed when you turn it back on. So yup, as you said correctly, I want the GPS to still function even when the screen is off. Please guide me to wherever I can get the solution as I use alot of GPS!!!
All good GPS software should have option to keep device on all the time while GPS fixed.
I dont think it's possible to keep GPS on while device is on standby mode. Anyway, GPS should stay on even if screen light is turned off for power save.
Well I am using TomTom Navigator 7 with Australian maps, and I have tried looking at the options in TomTom and I couldn't find any setting to keep the screen turned on while GPS is working. And you are correct in that applications such as GPS and Bluetooth are impossible to stay running when the device goes into standby, as this feature is an OEM feature in all Windows Mobile devices to save power. The only way out I see, is to go to Settings>System>Power>Advanced and untick 'Turn off device if not used for...' This way the backlight can be turned off (which saves power) but the device itself is not totally off. This method will still consume power since the device is technically not in standby, but it's probably the best we can get since there is just no way to have GPS to function with the screen totally off ie in standby.
avantgarde84 said:
Well I am using TomTom Navigator 7 with Australian maps, and I have tried looking at the options in TomTom and I couldn't find any setting to keep the screen turned on while GPS is working. And you are correct in that applications such as GPS and Bluetooth are impossible to stay running when the device goes into standby, as this feature is an OEM feature in all Windows Mobile devices to save power. The only way out I see, is to go to Settings>System>Power>Advanced and untick 'Turn off device if not used for...' This way the backlight can be turned off (which saves power) but the device itself is not totally off. This method will still consume power since the device is technically not in standby, but it's probably the best we can get since there is just no way to have GPS to function with the screen totally off ie in standby.
Click to expand...
Click to collapse
I don't think that TT has the option you need - it takes its power options from the device (including screen brightness). That is probably because TT probably thought most people would have their device plugged in whilst navigating given the power required for navigating with the screen on.
I find that another side effect of this is that if I am driving on a bright day, I need to turn off the auto light level feature of the Raph to make sure the screen is as bright as possible.
avantgarde84 said:
Well basically I just want the GPS to still have the lock on the satellites EVEN when the device goes into standby. It's frustrating when after 3 minutes (my settings for power management) the device goes into standby and you realise that the GPS is closed when you turn it back on. So yup, as you said correctly, I want the GPS to still function even when the screen is off. Please guide me to wherever I can get the solution as I use alot of GPS!!!
Click to expand...
Click to collapse
I think it's a matter of semantics, but it may help you find a solution faster:
What you need is a tool / solution / procedure that turns only the screen off WITHOUT putting the phone in standby mode. Try searching for that; if you include the whole GPS tracking wish then you might not find what you're looking for so quickly.
Good luck and let us know if you found something that works for you!
Just curious as to what tracking software is used?
Our free PocketReperion tool does keep the device from entering standby mode.
It's free software.
We just lauched a special version for the Raphael, v.1.53
Coolest thing is that you canupload audio / video / photo's and people who are trascking you (live) will see all the content you upload, on the spot that you uploaded it.
get the free client here :
http://www.reperion.com/newclient
be sure to register for a free account first, read the readme in the directory above
EDIT : SUPPOERTED MAPS :
Google Earth
Google Maps
Google Maps Mobile
Virtual Earth
Virtual Earth Mobile
Mappoint 2009
Yahoo! Maps
MapQuest
checkout the example at http://tracker3.reperion.com/wrldmap.aspx?name=d-8498
BETA : http://www.reperion.com/beta
Coromoto said:
I think it's a matter of semantics, but it may help you find a solution faster:
What you need is a tool / solution / procedure that turns only the screen off WITHOUT putting the phone in standby mode. Try searching for that; if you include the whole GPS tracking wish then you might not find what you're looking for so quickly.
Good luck and let us know if you found something that works for you!
Click to expand...
Click to collapse
As far as I always remembered, the only time the screen can be turned off is when the phone goes into standby. In other words screen off=standby and vice versa and no other way to breakup this association. The option I have considered is what I have mentioned above, ie just letting the backlight turn off, but NOT turning the device off. But this will be a problem if you need to look at the screen constantly for navigation and cannot survive with just voice navigation. If you really do need the backlight to be turned on all the time, then go to Settings as well and untick the TUrn off backlight option too. Power will be gone in no time, then you probably will need to consider a in-car charger then...
lucid said:
Just curious as to what tracking software is used?
Our free PocketReperion tool does keep the device from entering standby mode.
It's free software.
We just lauched a special version for the Raphael, v.1.53
Coolest thing is that you canupload audio / video / photo's and people who are trascking you (live) will see all the content you upload, on the spot that you uploaded it.
get the free client here :
http://www.reperion.com/newclient
be sure to register for a free account first, read the readme in the directory above
EDIT : SUPPOERTED MAPS :
Google Earth
Google Maps
Google Maps Mobile
Virtual Earth
Virtual Earth Mobile
Mappoint 2009
Yahoo! Maps
MapQuest
checkout the example at http://tracker3.reperion.com/wrldmap.aspx?name=d-8498
BETA : http://www.reperion.com/beta
Click to expand...
Click to collapse
Thanks mate, will give it a test and see how it goes...
Hi, first post for me
I have wanted to do exactly the same thing, that is, keep the GPS tracking on my HTC Touch Diamond with the phone in "off" mode. The only way I have found to do it, is this; play music via a Bluetooth headset (you can pull out the jack-plug too, so no actual sound is heard). Now when you turn the phone "off" the GPS will continue to track.
There probably is some simple software out there that would work better, but this is my solution
Cheers
Perhaps this helps...
Go to HKLM\System\CurrentControlSet\Control\Power\State\Suspend
and create a DWord value named NAV1: with value decimal 0 (0 means power on and here is a complet list of values)
This allos HTC GPS driver to stay on on suspend mode. I think this allows any application accesing GPS to get data while the PDA is off.
Can someone test it and report back?
If this works, i can create a CAB to easily deployment.
Cheers
Cheers
jcespi2005 said:
Perhaps this helps...
Go to HKLM\System\CurrentControlSet\Control\Power\State\Suspend
and create a DWord value named NAV1: with value decimal 0 (0 means power on and here is a complet list of values)
This allos HTC GPS driver to stay on on suspend mode. I think this allows any application accesing GPS to get data while the PDA is off.
Can someone test it and report back?
If this works, i can create a CAB to easily deployment.
Cheers
Cheers
Click to expand...
Click to collapse
Hi there, thanks alot for your discovery, will surely test it out later. With TomTom Navigator that I am using, once you have planned a route and it starts to navigate, the screen stays on forever. What I said earlier in my previous posts are irrelevant since TomTom just keeps the screen on and never dims the backlight nor turns off the device. So unchecking the Turn Off Device after XX mins is useless. Anyway we need some fix which can 1) Allow us to turn off the screen to save power but still have TomTom running and giving us navigation instructions and 2) Does not disconnect from satellite fixes when device is put into standby.
Your reg edit sounds like it will work, but will have to confirm it first. A cab file will be really appreciated. Cheers!
EDIT: preliminary testing: Turned on GPS outdoors, managed to get a satellite fix. Did not plan any route. Turned off screen (ie standby), turned back on, GPS signal was lost. Had to wait few seconds to reconnect to the satellites. Unsure about voice navigation while screen is off but since when I turned the screen back on the signal was lost already I don't think there will be any navigation when screen off. In short --> DOESNT WORK.
I didn't read through everyone's response, but what about just using a car charger, and setting the power settings to never turn off when turned on? You can turn down screen brightness if you're worried about the screen itself, but that should keep you connected at all times, and the battery should remain charged as well.
This also avoids registry tweaks that may have side effects. Simple, and painless in my mind.
avantgarde84 said:
EDIT: preliminary testing: Turned on GPS outdoors, managed to get a satellite fix. Did not plan any route. Turned off screen (ie standby), turned back on, GPS signal was lost. Had to wait few seconds to reconnect to the satellites. Unsure about voice navigation while screen is off but since when I turned the screen back on the signal was lost already I don't think there will be any navigation when screen off. In short --> DOESNT WORK.
Click to expand...
Click to collapse
The change of NAV1: only affect to GPS device, so perhaps the nav software need more devices to stay on to work (or really the soft changes the power state of devices itself). I tested the changes above with HTC GPS Tool and seems to work, but seems navigation software are not the same... sorry.
Cheers
I'am using the IGO8 Navi Software on my Touch Pro.
I ride by mountain bike often and today I wanted to save the track I normally ride.
I turned on IGO 8 and get a satellite fix and started riding, when I came to my first check point I realised that on stand by mode, the IGO8 wasn't getting satellites.
So I minimised the IGO8 and I had the today screen on. I unticked turn-off device and turned the keylock on.
This was my only solution, it would be great to have the GPS running when switched off.
doublecheese said:
I'am using the IGO8 Navi Software on my Touch Pro.
I ride by mountain bike often and today I wanted to save the track I normally ride.
I turned on IGO 8 and get a satellite fix and started riding, when I came to my first check point I realised that on stand by mode, the IGO8 wasn't getting satellites.
So I minimised the IGO8 and I had the today screen on. I unticked turn-off device and turned the keylock on.
This was my only solution, it would be great to have the GPS running when switched off.
Click to expand...
Click to collapse
Trackme has a GPS powersave mode which allows the screen to be turned off but will still record your track. http://forum.xda-developers.com/showthread.php?t=340667
Thanks
Let me check it out.
Hi,
I recently bought a HTC Touch HD, and I think that the "shutdown-screen-when-you-answer-a-call" function of phones like Diamonds, Touch Pro and HD is the dumbest way to prevent accidental presses on the touch screen.
Our devices have a light sensor, that could be used to switch off the screen if the phone is near the ear (like the phone using an "i" word ) and keep it on when you answer with loudspeaker for example.
The "problem" with this function is that when you're already in a "no-light" environment, the screen lock function doesn't work.
To resolve this issue, I think we could use the G-Sensor. Indeed, if the place has no light, then, the phone cannot detect the proximity of a ear. But when you put the phone next to the ear, you hold it a the vertical...
To make it short, the app should do :
Do nothing in normal use.
When a call arrives :
- it monitors the ambient light
If there's light :
- when you answer the call, if there's light then no more (you stick the phone next to the ear), it switches off the screen and continue to monitor.
- while in call, if there's light again (you want to see some info on the screen for example), it switches on the screen and continue to monitor.
- and so on until you end the call
If there's no light :
- when you answer the call, but let it at the horizontal (you let it on the desk for example), it does nothing
- if you take the phone on the vertical position (you stick the phone next to the ear), it switches the screen off.
- if the phone, during a call, goes from vertical to horizontal of horizontal to vertical, the screen is switches on/of
- and so on until you end the call
Obviously, you could replace the "switch on/off screen" with "lock/unlock screen".
What do you think about ?
UPDATE :
After playing a bit with the HD, it appears that HTC DOES use the light sensor for turning the screen off during a call.
Let's do a test :
In a place with plenty light :
- put your mobile with the face up
- call a number (always face up) : the screen will not be switched off until the light sensor detects a loss of luminosity or a timeout set in the registry.
So, my conclusion is that HTC already use the light sensor to switch the screen off during a call, but they do it in an absurd way :
- they poll the sensor just to shut down the screen, not to switch it on.
- once the screen has been switched off, they do not longer poll at all.
Do you think it could be a way to "hack" their system to do what we want to do ?
no one has an opinion on this idea ? if there's nobody that want / have the time to develop a soft, I understand, but at least please, give me just your opinion
I agree with your idea for such an application. I must admit that I am very used to just pushing the power button when I answer a call (from Polaris use) to ensure I am not going into other programmes as I rub the phone against my ear. On the other hand I am trying to get used to the Touch HD's modern automatic method but I can't help not feeling relaxed that it has worked and keep trying to look at the screen in the corner of my eye to see if it did go off or not.
If it does not come now I am sure there will be such an app very soon just as you describe especially as all the latest models now have it.
i'd use the half of it that doesn't require the G-sensor as i don't have a diamond or HD...
but i'm certainly sick and tired of my ear operating my touch screen while i'm speaking.
I've written a prototype to do exactly what you are talking about although the one crucial part I am missing is the lock code. Every example or suggestion for locking the screen is very hacky and never feels like a good approach. If anyone has a good solution for locking the screen (especially in managed code) I would be happy to complete what I have started and release it with source so it could be improved upon.
So far, the best locking utility I have seen is PocketShield although I'm not sure what approach was used for locking in that case. It almost feels like a form that captures all windows events but I'm not sure exactly.
fireweed said:
I've written a prototype to do exactly what you are talking about although the one crucial part I am missing is the lock code. Every example or suggestion for locking the screen is very hacky and never feels like a good approach. If anyone has a good solution for locking the screen (especially in managed code) I would be happy to complete what I have started and release it with source so it could be improved upon.
So far, the best locking utility I have seen is PocketShield although I'm not sure what approach was used for locking in that case. It almost feels like a form that captures all windows events but I'm not sure exactly.
Click to expand...
Click to collapse
Maybe the simpliest way to "protect" the screen is to switch it off. I suppose it must be some API to do that ?
Concerning the "locking", I think the simpliest way is to put on focus an empty window (transparent if it can be ).
I'm really happy to know that you're working on an app like that
lpaso said:
Hi,
I recently bought a HTC Touch HD, and I think that the "shutdown-screen-when-you-answer-a-call" function of phones like Diamonds, Touch Pro and HD is the dumbest way to prevent accidental presses on the touch screen.
Our devices have a light sensor, that could be used to switch off the screen if the phone is near the ear (like the phone using an "i" word ) and keep it on when you answer with loudspeaker for example.
The "problem" with this function is that when you're already in a "no-light" environment, the screen lock function doesn't work.
To resolve this issue, I think we could use the G-Sensor. Indeed, if the place has no light, then, the phone cannot detect the proximity of a ear. But when you put the phone next to the ear, you hold it a the vertical...
To make it short, the app should do :
Do nothing in normal use.
When a call arrives :
- it monitors the ambient light
If there's light :
- when you answer the call, if there's light then no more (you stick the phone next to the ear), it switches off the screen and continue to monitor.
- while in call, if there's light again (you want to see some info on the screen for example), it switches on the screen and continue to monitor.
- and so on until you end the call
If there's no light :
- when you answer the call, but let it at the horizontal (you let it on the desk for example), it does nothing
- if you take the phone on the vertical position (you stick the phone next to the ear), it switches the screen off.
- if the phone, during a call, goes from vertical to horizontal of horizontal to vertical, the screen is switches on/of
- and so on until you end the call
Indeed, you could replace the "switch on/off screen" with "lock/unlock screen".
What do you think about ?
I searched the forum for an existing app that could do this, but I didn't find anything.
If there's already an app that do this stuff, I'm truely sorry for this post.
Click to expand...
Click to collapse
I'm looking for this.. If you find a solution send me a PM, I will do the same
Thanks!
We need this app, how does the iphone acheive this?
I think the 'easiest' way to make this app would be to keep the phone doing what it does currently (put the phone on standby when answering a call) then have the light sensor take the phone out of standby when it receives light, (taking it away from your ear)?
Obviously if its dark then we would have to use the power butten as we currently do now or have the Gsensor do it with a twisting motion (vertical to horizontal).
If anyone has an idea how to program this i'm willing to help in any way, the current systems seems so crude on such tech devices!
DB
lpaso said:
Hi,
I searched the forum for an existing app that could do this, but I didn't find anything.
Click to expand...
Click to collapse
There a program, that can help you. Not full, but it can switch off screen, using g-sensor. However its using not vertical aligment of the phone. There are using changing orientation of the phone to decide when phone near the ear.
http://forum.xda-developers.com/showpost.php?p=2622590&postcount=45
I have always wondered why our WM phones don't do what the iphone does...
For the SE Xperia X1, the light sensor is right near the earpiece (along with the little front facing camera), so it would go to virtually 100% darkness when near the ear. I would presume unless you are using the phone also in 100% darkness (which should be pretty rare I would guess) then it would work like the iphone.
I have also been quite annoyed by the fact that after a phonecall, sometimes I found i'm in a note taking program or weather program or something else. It just seems dumb, considering our phone HAVE these lightsensors?!
I think it's a fantastic idea to solve a VERY FRUSTRATING PROBLEM
lpaso said:
no one has an opinion on this idea ? if there's nobody that want / have the time to develop a soft, I understand, but at least please, give me just your opinion
Click to expand...
Click to collapse
I would rank myself this way:
Not a newbie who's just gotten a touchscreen phone and is now discovering the quirks when holding screen to ear,
and not a developer,
but a power-user. I have installed all sorts of XDA-developed features/enhancements for my phone.
But now I have 4 years experience -- starting with the T-Mobile MDA, and its successor, the T-Mobile WING. And despite all of the advancements expected in that time, STILL, I inadvertently end a call, or put it on hold accidentally, ALL THE TIME. Between that and trying to retrieve the phone from my pocket just to answer the damn ringing phone, I would say I have, on the average, a 20% success rate -- and 80% of the time the call is disrupted. And at least once a day my ohone, in my pocket, even when using s2u2, manages to REDIAL my latest conversation, so mcuh so that all my friends say "why don;t you get rid of that phone. It does all these whiz bang things but still can't reliably manage a basic phone call.
My most recent experiment was to call someone, then when they answered, press the s2U2 key to lock the phone screen. Only I came to find out from A_C that this is no good: S2u2 does not have recognition that you're ending the call, thus, since it's in lock-mode, the "END CALL" or Hang-Up hard key does not work.
So by all means, I would even pay for an app that once and for all handles the baseline problems of simply making a phone call. Thanks for making this request.
fireweed, have you contacted A_C, author of s2u2 ?
There may just be perfect synergy between the two of you. His "best of breed" screen-lock app is widely used -- and other developers, like supbro, for example, author of iDialer, have collaborated on small code-bits from A_C to solve some integration problems.
If for any reason you are unfamiliar with A_C, go to his website: www.ac-s2.com -- where his apps are explained, and all link back to XDA.
He's even managed to make the screen lock work, yet, have it selectively overridden when you insert headphone jack -- such that his s2p (slide to play) app opens and allows you to switch music tracks etc while otherwise the screen and buttons are all fully locked...
fireweed said:
I've written a prototype to do exactly what you are talking about although the one crucial part I am missing is the lock code. Every example or suggestion for locking the screen is very hacky and never feels like a good approach. If anyone has a good solution for locking the screen (especially in managed code) I would be happy to complete what I have started and release it with source so it could be improved upon.
So far, the best locking utility I have seen is PocketShield although I'm not sure what approach was used for locking in that case. It almost feels like a form that captures all windows events but I'm not sure exactly.
Click to expand...
Click to collapse
Hi,
After playing a bit with the HD, it appears that HTC DOES use the light sensor for turning the screen off during a call.
Let's do a test :
In a place with plenty light :
- put your mobile with the face up
- call a number (always face up) : the screen will not be switched off until the light sensor detects a loss of luminosity or the timeout set in the registry expires.
So, my conclusion is that HTC already use the light sensor to switch the screen off during a call, but they do it in an absurd way :
- they poll the sensor just to shut down the screen, not to switch it on.
- once the screen has been switched off, they do not longer poll at all.
Do you think it could be a way to "hack" their system to do what we want to do ?
I think HTC does not only switch off the display but goes to standby (phone works independent if you didn't know yet). Your idea is a lot different in terms of programming.
I don't know if it goes to standby : when the screen is switched off during a call, a press on any button switch it on again. In the registry, the key controlling the timeout before the screen is shut off is named "LightSensorToScreenOff" so I think it is just switching off the screen...
lpaso said:
I don't know if it goes to standby : when the screen is switched off during a call, a press on any button switch it on again. In the registry, the key controlling the timeout before the screen is shut off is named "LightSensorToScreenOff" so I think it is just switching off the screen...
Click to expand...
Click to collapse
Well if thats the case, its HALF of what the iphone does... it turns off the screen based on the light sensor going dark suddenly (next to ear) but then fails to turn the screen back on after you move the phone away from your ear...
Anyone know how to enable this?
Interested in having this feature too. Isn't it possible to have the G-Sensor determine when the phone is vertical and shut the screen and then when it is lying flat to turn the screen back on again. Believe that the Iphone does it this way, not with the light sensor.
Hmm... I never had my ear 'navigating' my phone during in-call before....
I never allowed the screen to touch my face anyway, and the speaker is facing the ear canal, when I receive or make calls...
But i do understand that s2u2 can do what you guys might need, it locks the screen during in call.
Hennyb said:
Interested in having this feature too. Isn't it possible to have the G-Sensor determine when the phone is vertical and shut the screen and then when it is lying flat to turn the screen back on again. Believe that the Iphone does it this way, not with the light sensor.
Click to expand...
Click to collapse
I think the Iphone has something called proximity sensor, which senses the distance from the ear to the phone, hence when the phone rest on the outer ear, the phone screen shut off.
Or am I wrong?
Section9 said:
I think the Iphone has something called proximity sensor, which senses the distance from the ear to the phone, hence when the phone rest on the outer ear, the phone screen shut off.
Or am I wrong?
Click to expand...
Click to collapse
No, you're right. It uses an iR sensor to know if there's something near the phone.
Hey everyone,
I need your help figuring out why my Touch Pro 2 will not enter sleep mode on it's own. For some reason, the back light will dim, but the screen will stay on even though I have all my settings correct in the power management settings. Has anyone experienced this before? I think the fact my phone will not sleep automatically really impacts my battery life as I can barley make it from 7AM-5PM with barely using it much. It use to work fine, but now it doesn't. I've even done a format of the device twice, but still that doesn't seem to fix the issue.
Any help or advice is appreciated.
Not sure what programs you have loaded but try cold boot, see if works. Then check as you add one program at a time.
There is also an option under settings/battery/advanced to force the device to sleep after a period of time.
@ Aspesi4
Did you ever find a solution for this? I'm having the same issue.
I'm not sure when it started as I have a habit of putting the phone to sleep manually before I holster it.
If I lock the phone, the screen will dim, and at intervals, get bright again on its own. If I leave it at the TF Home Screen, it will stay bright and never dim.
I just can't bring myself to hard reset this phone right now . . lol. Maybe when I have more time. For now, I'll keep manually putting the phone to sleep .. . . sort of a muscle memory thing anyway. I wouldn't mind fixing it though, either.
Nope, never solved this problem. Sorry, I think you're on your own on this one.
I have also been experiencing this problem. I just got my Verizon Touch Pro 2 about two weeks ago. I have only added a handful of apps (WinMo MarketPlace, NetFlix Mobile manager, AP Mobile News, WeatherBug, and Shazam. I am pretty sure it was doing this before Shazam.) I think the phone was doing this even before I installed anything on it, but not certain. This is what I noticed;(I had T-Mobile's version and it did not have this issue.) I was amazed that my new Verizon Touch Pro2 was draining its battery life much more quickly than my TMobile version. Then I figured it out; when ever I get any notice on my phone (missed call, text message, phone notification)the screen lights up. This is normal. However, what is not normal is that the screen stays on until I manually acknowledge the notification or I manually hit the sleep button. I have the power management settings to turn off the backlight if not used for 30 sec and to put the phone to sleep after 1 minute. I tested it a few times to see if it would eventually turn off, 1 minute, 3 minute, up to 15 minutes and it still stayed on. . .
htc touch pro 2 won't enter sleep mode
It's the weather program that keeps it awake ...Slider Bar -> Settings -> Data Download Weather -> Uncheck download weather automatically
htc touch pro 2 won't enter sleep mode
"It's the weather program that keeps it awake ...Slider Bar -> Settings -> Data Download Weather -> Uncheck download weather automatically"......
Agreed it is the weather program.
Specifically I turned off my location data collection..... Settings > Location > Improve Location Service (Slide to off). This worked! However out of interest I switched it back on and my backlight still sleeps OK, I just hope this problem doesn't keep randomly popping up.
I'm experiencing the same issue, suddenly...
But when I re-enable the Location option, it won't go into sleep...
Any ideas how to fix this?
bloddy idiots. HTC adds fancy animated auto-downloading weather at GPS location and break the ability to turn the phone on or answer calls! Quietly BRILLIANT!!!!!! idiots.
Hi to all.
I've a little problem: I go to work with a motorcycle and my S2 recognize it as a sporty activity (cycling): is there a way to stop this behaviour?
Thanks
GS
Italy
GS, I'm with you. I have the exact same problem. Every day I have to zero out the record for that day and then I turn off the cycling tracker (hoping that it just might stay disabled, but of course it never does). I wish there was a way to permanently disable this tracker, as I seldom ride a bicycle and could easily do without tracking this activity...
There automatic activity recognition settings in S Health. Just go to settings
Sorry but I don't have this option...
It seems that you can disable all automatic detections, and that you can not select with detection disable...
GS
ITALY
I have this same issue, the only solutions I've found are:
1) Download S-Health and disable it through manage items, but that does nothing.
2) Contact Samsung for support, which I've read is basically the first solution.
I want to set my watch for all my notifications but I think it's weird how you can't disable a function like that. I also tried factory resetting my watch to no avail...
Same problem here.
I don't want to disable cycling because i DO cycle sometimes and want to record it.
What annoys me is everytime I step in my car or ride a motorbike it detects me as cycling for a few hours.
Seems to be no way to disable it.
Anyone found a fix?
I'm still having the same problem. Strangely, it only seems to happen in my truck. When I drive the sedan, nothing happens and my watch works as intended. i'm not sure what I do in the truck that has my watch convinced I'm cycling down the highway at 70 MPH.
I've had to run off auto-detect which makes me sad because I forget to log my walking and my elliptical all the time. The watch we very good at detecting these 2 activities.
For future users who end up here with a google search:
the workout auto-detection settings are not the the S-Heath (or now "Samsung Health") app on your phone, they are in the S-Heath app that's on the watch itself. In last screen, "settings"