Greetings;
My apologies if this is asked-and-answered, but I can't seem to find any information regarding the internal contact pins inside the N915T.
There is an L-shaped group of pins below the SD card slot. The only pins in the Mugen battery/Qi kit I have for it go to the lower two pins - I presume they connect the Qi coil to the phone's charge-circuit - but I don't know what the other two are for. There is also a pair of pins to the right of the camera assembly.
If anybody knows what these pins do, I'd really like to know.
Thanks!
Gadgetdroid said:
Greetings; My apologies if this is asked-and-answered, but I can't seem to find any information regarding the internal contact pins inside the N915T....
Click to expand...
Click to collapse
I don't have this device but, you do have an opinion to purchase the Samsung Factory Service Manual (SM-SMN915T) that should have what you're looking for.
https://www.samsungparts.com/SM-SMN915T-MANUAL.html
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Related
Dears folks,
I'm in search of a list of the references of the electronic components/parts of the Samsung Galaxy S GT-i9000.
In particular the reference of the main speaker (see pics attached) part since I've broken this part while replacing my broken LCD screen/digitizer.
I failed to find any OEM/electronic parts suppliers selling this.
Any idea ?
Thanks beforehand.
The SEC part number for QSP01 speaker module is GH59-09408A.
It will cost you around 25-30€ I recon.
Would anyone happen to know where to get a gps antenna? Its the sticker-type just beside the speaker.
I can make a small donation for whomever finds a such antenna.
Sent from my GT-I9000 using XDA App
rkantos said:
Would anyone happen to know where to get a gps antenna? Its the sticker-type just beside the speaker.
I can make a small donation for whomever finds a such antenna.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
The antenna assy is not sold separately.
You need to buy the whole middle frame.
Price is about 25 euros.
Richthofen said:
The antenna assy is not sold separately.
You need to buy the whole middle frame.
Price is about 25 euros.
Click to expand...
Click to collapse
Well, where can I get the middle frame?
@ Richthofen
Thank you. Huh same question as "rkantos", any idea where to buy GH59-09408A online ? Failed to find it on eBay.
you might try these folks http://www.globaldirectparts.com/
they're in Texas, USA
Thanks Larryccf. Unfortunatly, not in their catalogue.
I'll have a look straight to korean "suppliers" ...
Okay, I did some further investigation and found out that this "rear speaker" is manufactured by a Korean company named Bluecom.
The reference of this "speaker module" is HQS151135P ... which is to be found inside the plastic ****.
Hope this help for future "unlucky" like me when disassemblying the SGS.
Hi everybody,
I'm looking for a website where I can buy a special spare parts for my galaxy s!
This part is the mic, the physical button and the two touch buttons.
All this components stay in the same part
If you know what's the reference number of this part or where I can buy it, you may give me this.
thanks boys.
Jika
jawad_449 said:
Hi everybody,
I'm looking for a website where I can buy a special spare parts for my galaxy s!
This part the mic, the physical button and the two touch buttons.
All this components stay in the same part
If you know what's the reference number of this part, you may give me this.
thanks boys.
Jika
Click to expand...
Click to collapse
For the 2 touch buttons ... lookout on eBay with the following keywords (I cannot give the direct link since I'm limited in my profile account here) :
"Flex Cable Keypad for Samsung Galaxy S i9000 wTracking"
... quite not sure it includes the mic and the "plastic" button at the bottom of the phone, tough.
Thanks itdoe. I'm just looking at this and there's the mic, that's exactely what I'm looking for! That's maybe the solution for my physical button which lost his sensitivity and the two touch button which doesn't work ...
But I have one more question :
Do you know where I can find the wire connecting this part and the mothercard? (like in the pics).
That's a standard cable or that's a spacial Samsung cable?
Someone know what's it utility?
I ask you that because I disconnect this cable and everything works in my phone only the two touch key.
After some investigations, I found what's this wire. That's the network cable which work like your hearset for the radio in your Galaxy S. That's in fact an antenna! (maybe for bluetooth too, but I'm not sure for that!)
If that can help someone
Anyone have info on the part number for the front facing camera?
TheBrandonWRX said:
Anyone have info on the part number for the front facing camera?
Click to expand...
Click to collapse
The front facing camera is in the same module with the main camera.
The part number for this assy is GH59-09400A.
The price is around 40-50 euros I recon.
Hello,
i need the spare part: microphon/antenna
Do you know also the part number and where i can find it?
Thanks for help.
gb16928
gb16928 said:
Hello,
i need the spare part: microphon/antenna
Do you know also the part number and where i can find it?
Thanks for help.
gb16928
Click to expand...
Click to collapse
The microphon and antenna stay on button flex cable ...
You can find it on Ebay (search : "GENUINE SAMSUNG KEYPAD FLEX RIBBON CABLE FOR I9000" )
I think I've the one million dollar question ...
I wondered if someone know where I can find the power flex cable welded on the mothercard to remplace my cutted flex cable ... (or eventually this reference).
If you havn't any information about this one, do you think it's possible to use an other flex cable model?
thank you for your answers...
To bad there is no answer to the real flex cable or the middle part. By my own stupidness i destroid the flex cable. I think I must buy a new SGS then all my holiday pictures and videos are in the broken phone. So the new Samsung Pad must wait...
Thanks, my i9000 is ok now
Hey Guys,
Has anyone found the pin-out for the 40 pin connector yet?
I haven't seen any development. Looking to make a USB host adapter like on the galtab.
Needs an asus insider to divulge details of the connector pinout, i think.
I've seen this: http://www.nothingbuttablets.com/3140
So, Im hoping someone can do a tear down? or something and give us the pin-out like the samsung galtab 10.1
rhcp0112345 said:
I've seen this: http://www.nothingbuttablets.com/3140
So, Im hoping someone can do a tear down? or something and give us the pin-out like the samsung galtab 10.1
Click to expand...
Click to collapse
I've been waiting forever to do a teardown. As soon as one of my 4 preorders arrives, I'll be posting all the relevant info. But there's really no believable ETA on the preorders, so we'll have to wait until someone actual gets one, or asus leaks something.
msticninja said:
I've been waiting forever to do a teardown. As soon as one of my 4 preorders arrives, I'll be posting all the relevant info. But there's really no believable ETA on the preorders, so we'll have to wait until someone actual gets one, or asus leaks something.
Click to expand...
Click to collapse
i'm going to do dvb-t , need the mini pci-e slot to solder and side by side pic of 3g and non 3g .
Jhinta said:
i'm going to do dvb-t , need the mini pci-e slot to solder and side by side pic of 3g and non 3g .
Click to expand...
Click to collapse
I have a bunch of two different thickness of mini pci-e slot, from another project. Can not remember the thickness, but I can dig around and post measurements if someone needs.
PM me with a shipping address and I will send you 1 of each (thin, thicker) gratis, via 1st class post. They are small and fit in a small envelope with a bit of padding. Only request if you are seriously going to solder it into your TF101 or dock.
msticninja said:
I've been waiting forever to do a teardown. As soon as one of my 4 preorders arrives, I'll be posting all the relevant info. But there's really no believable ETA on the preorders, so we'll have to wait until someone actual gets one, or asus leaks something.
Click to expand...
Click to collapse
I opened the Samsung USB host adapter. A small blade slid into top and bottom freed some sticky areas. Then used usb plug to push it out/open.
It has a few positive and ground pins, D+ and D- for usb signal, and two more: ID and DEC. I did not attempt to trace anything yet.
Other than plug & socket there are only 3 other surface mounted items, 1mm small rectangular things, like fuses or other item?
Unsure if the existing 40 pin cable includes any ID or DEC function. Might be interesting to see where they go with tracing.
Thoughts?
Hi!
I noticed my earpiece is not working at all and decided to disassembly my Relay. It was a shock for me, when I saw, that the part marked on red here: http://i.epvpimg.com/A6xZd.jpg
looks like that in my phone:
http://i.epvpimg.com/uTXBg.jpg
http://i.epvpimg.com/xlpvg.jpg
http://i.epvpimg.com/b4aWf.jpg
http://i.epvpimg.com/65U5d.jpg
(I am even wondering how is my phone working now...).
Could somebody give me a name of this part? And can it be a reason for not working earpiece, or should I disassembly my Relay "deeper"?
I found this: https://www.gounlock.com/details.php?itemId=8555
I was looking only on the length of this cable, so I'm still not sure if it's what I'm searching for.
That would be the main flex cable
http://forum.xda-developers.com/showthread.php?t=2206523
Be sure to thank jax184
demkantor said:
That would be the main flex cable
http://forum.xda-developers.com/showthread.php?t=2206523
Be sure to thank jax184
Click to expand...
Click to collapse
Thank you for your answer demkantor.
The second post which I didn't read before helped me mostly: http://forum.xda-developers.com/showpost.php?p=39598833&postcount=2
Could you confirm if the part I put with a link in 1st post is what am I searching for? I couldn't find anything for "main flex cable" in Google and also I don't think it's the same part.
And is it possible to change it without replacing the whole screen-part of the phone? The disassembly manual ended with same step I did.
Unfortunately I can't say for sure as I haven't yet torn this phone apart myself
I would recommend to pull out the broken cable and try to match it physically to the one you linked
Otherwise search out a thread that someone here has done this and ask if they can confirm
Best of luck!
When I had to replace a broken screen on my Relay, the replacment screen came with that cable, screen, digitizer and top case. If there are any more still being sold elsewhere, it might be easier to replace then entire top half of the phone. I had cost me $40 about a year ago, unfortunaglly I can't find it again listed on ebay. Good luck
I have a Sprint note 2 (SPH-L900) and noticed these antenna ports (I think that's what they are) They are covered by a thin plastic layer that looks like I could probably pierce it with something, but I haven't tried it because I am not an idiot. One of them is labeled "R1" and the other "G"
I have heard that unless you buy the right external antenna, that use of these ports can hurt your phone, potentially disabling the internal antenna. That being said, I was looking for an antenna case for the note 2 that will increase my signal, or bring those ports outside the phone so I don't need to remove the battery when using the external antenna (And removing the ext. antenna will still have the internal one enabled.) I looked and searched the fourms, and could not find information on an antenna case for the note 2. If any of you know where I can find one, or possibly customly order one that would be appreciated.
Thanks.
Hi
Thanks for writing to us at XDA Assist. I can't find anything relating to your question on XDA, please ask your question here:
Sprint Galaxy Note II Q&A, Help & Troubleshooting
No response in two days, thread closed, thanks.
Just curious if anyone knows about a battery interchange guide. Something I could enter dimensions and contact positions and then get a list of batteries that might fit in that space.
Specifically, I have a Chinese KIngSing S2, and, why yes, the battery is dead. The company appears to be as well, or at least they are no longer making replacement batteries for said. Not a big deal, it was a cheap phone, nothing to scream about, and I've already moved on. But, it's still pretty decent and I could give it to my kid... if I could get a battery for it that works.
So... before I break out the soldering iron, I thought I'd ask.
Any suggestions?
fixerdave said:
Just curious if anyone knows about a battery interchange guide. Something I could enter dimensions and contact positions and then get a list of batteries that might fit in that space.
Specifically, I have a Chinese KIngSing S2, and, why yes, the battery is dead. The company appears to be as well, or at least they are no longer making replacement batteries for said. Not a big deal, it was a cheap phone, nothing to scream about, and I've already moved on. But, it's still pretty decent and I could give it to my kid... if I could get a battery for it that works.
So... before I break out the soldering iron, I thought I'd ask.
Any suggestions?
Click to expand...
Click to collapse
Hello,
Try posting your query here Ask any Query Newbie Friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal