[Q] Help: My G920F didn't start - Galaxy S6 Q&A, Help & Troubleshooting

Only download mode works
The recovery and boot nope.
I flashed from odin a stock firmware but... nothing
In Download mode:
ODIN MODE
PRODUCT NAME: SM-G920F
Current binary: Samsung official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled.
KNOX WARRANTY VOID: 1 (0x500)
RP SWREV: B:5 K:2 S:2
I need help with this.

Did your flashing process succesfuly done?
Have u tried another stock rom?

nonomektoub said:
Did your flashing process succesfuly done?
Have u tried another stock rom?
Click to expand...
Click to collapse
Yes, but... Didn't work.

try to flash a twrp recovery and clean cache / factory reset.. then reboot..

fhavio said:
try to flash a twrp recovery and clean cache / factory reset.. then reboot..
Click to expand...
Click to collapse
I have a problem, I don't have acces to recovery or download mode

Related

[Completed] Recovery Accidentally Erased g935v s7 edge

I was rooting the phone and I accidentally erased the recovery partition on it. So i am unable to install twrp recovery to flash roms. I can't even put the phone in factory reset as the complete recovery is gone. Does anyone here know how to fix this issue? I have a Samsung Galaxy s7 edge model g935v verizon version. PS when I try to put the phone in factory recover this is what i get
Recovery Booting...
Odin Name (HIGHSPEED)
PRODUCT NAME: SM-G935V
CORRENT BINARY: Samsung Offical
SYSTEM STATUS: Custom
FAP LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE
AP SWREV: B4(2,1,1,1,1) K1 S3
SECURE DOWNLOAD : ENABLE
and it just stays on this screen doing nothing.
Hi !
Here is this thread , have a look
https://forum.xda-developers.com/verizon-s7-edge/how-to/firmware-verizon-s7-edge-t3344092
and here
https://forum.xda-developers.com/ve...de-flashing-sm-935u-firmware-verizon-t3415145
Good luck !

Samsung J5 2016(SM-J510FN) Brick

Hi everyone , i have a Samsung J5 2016(SM-J510FN) , i have stock ROM + Root + TWRP on the phone, 2 days ago i try to make factory reset from android menu , after that my phone restarted but every time start only in TWRP recovery mode , i try it to make it a clean install with Odin but every time is stuck on <ID:0/004> aboot.mbn , or an older version of Odin give me fail , i try it to install a custom rom with twrp , install succesfuly but start again only in TWRP recovery mode , i try to use SmartSwitch from samsung , but say my S/N is not valid ( i think becouse is from Romania) , on Download mode i have this mesage if help
Product Name SM-J510FN
Curent Bynary: Custom
System Status: Custom
Fap Lock: OFF
Waranty void: 0x1 (2)
Qualcom Secureboot: Enable (CSB)
RP SWREV: S1 , T1, R1, A2, P1
Secure Download: Enable
i try to flash another TWRP to fix it problem , stuck on image.img , how can i unbrick this idiot phone?
your hard is dead ! u should to change the hard . or change your main board
You should not retset factory when your charging Below 70%

[Resolved] J510fn twrp

Hi everyone , i have a Samsung J5 2016(SM-J510FN) , i have stock ROM + Root + TWRP on the phone, 2 days ago i try to make factory reset from android menu , after that my phone restarted but every time start only in TWRP recovery mode , i try it to make it a clean install with Odin but every time is stuck on <ID:0/004> aboot.mbn , or an older version of Odin give me fail , i try it to install a custom rom with twrp , install succesfuly but start again only in TWRP recovery mode , i try to use SmartSwitch from samsung , but say my S/N is not valid ( i think becouse is from Romania) , on Download mode i have this mesage if help
Product Name SM-J510FN
Curent Bynary: Custom
System Status: Custom
Fap Lock: OFF
Waranty void: 0x1 (2)
Qualcom Secureboot: Enable (CSB)
RP SWREV: S1 , T1, R1, A2, P1
Secure Download: Enable
i try to flash another TWRP to fix it problem , stuck on image.img , how can i unbrick this idiot phone?

SM-J710FN with Binary 6 HELP

Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
m_alswairki said:
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
Click to expand...
Click to collapse
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
m_alswairki said:
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
Click to expand...
Click to collapse
Same problem around me! - Finally any good new news for that?
J710FXXU6CSE1
I use this, yesterday this one repair my bootloop (black screen after logo), naw i cant find any possible to root my phone.
When u get binary 6 most important in wersion is J710FXXU---6---CSE1 (marked 6), this seys how meny binary it's. U need same number binnary or more binnary to flash phones corrects.
PS. - my model phone was change from SM-J710F to SM-J710FN but till naw all works fine.
If anyone get binnary 6 and got worked root files plis share.

SM-G930F Bootloop problem.

Hello, i've got SM-G930F with bootloop the phone was random rebooting once for a day and suddenty went bootloop.
Tried flashing original rom with Success in odin also TWRP with Fail. Cannot access recovery mode. up+power+home
Download Mode Info:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: On
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:6 K:4 S:5
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Kisu1337 said:
Hello, i've got SM-G930F with bootloop the phone was random rebooting once for a day and suddenty went bootloop.
Tried flashing original rom with Success in odin also TWRP with Fail. Cannot access recovery mode. up+power+home
Download Mode Info:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: On
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:6 K:4 S:5
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Click to expand...
Click to collapse
hey try flashing the phone with a stck firmware and check the nand erase on odin
Kisu1337 said:
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Click to expand...
Click to collapse
did you factory reset after flashing it? if not, boot into stock recovery and factory reset it.
also, the screen should NOT go black when flashing in Odin. That is peculiar and also might be part of your problem

Categories

Resources