[TWRP] [OREO] [OFFICIAL] R16NWG935FXXU2ERD5 BTU Firmware Dump - Samsung Galaxy S7 Edge Guides, News, & Discussion

Edit: Got Bootloader Files just now. Will include it in my upcoming custom ROM
Will keep it short. Nobody wants to read big stuffs anyways
Do this if your Knox counter is already 0x1
S7 Flat users go here https://forum.xda-developers.com/ga...u-firmware-t3784565/post76391260#post76391260
Here u go guys,
The Ofiicial Oreo firmware R16NWG935FXXU2ERD5
- Its a TWRP Backup
- Contains UNTOUCHED System,Baseband and boot image.
Steps:
- Extract zip to your External SD
- Reboot to TWRP
- Wipe system, data, internal sd etc etc (what you do usually when flashing a rom)
- Restore> R16NWG935FXXU2ERD5
- Flash no verity zip
- Flash Magisk
- Flash your Country CSC (Use S8 Port CSC for now)
-Reboot
Download link : https://mega.nz/#!URswBJ5A!ThOBn4u7dZYQGEo6BueKCtL-BS1gqzsLgMWlSaYrJ-c
This is only for people who dont want to wait for official OTA and for Devs who wants to make a ROM now
The official firmware might get uploaded on sammobile after 2-3 days
The backup is untouched so everything is present in this (bloat and useless apps too)
Debloat apps with titanium backup and report back if u face any issues.
Make sure to debloat SecuritylogAgent. It keeps bugging you that unauthorised actions have been detected and stuff lol
If your knox is intact or dont like dumps then follow Rifek's Guide
rifek4 said:
FLASH THIS STOCK NOUGAT FW THEN YOU WILL GET OREO 4 SURE GUYS JUST USE OTA UPDATE VIA PHONE
S7 Flat (G930F)
https://de.s2.samsungbay.com/8774/BTU-G930FXXS2DRC3-20180402085751.zip
https://ru.s1.samsungbay.com/087f/BTU-G930FXXS2DRC3-20180402085751.zip
S7 Edge (G935F)
https://de.s2.samsungbay.com/f253/BTU-G935FXXS2DRC3-20180330111551.zip
https://ru.s1.samsungbay.com/ff57/BTU-G935FXXS2DRC3-20180330111551.zip
It's BTU United Kingdom FW You can use also SamFirm to download FW but you need to install AiO-Runtimes to get it working: https://www.sereby.org/site/All in One Runtimes SamFirm is on XDA.
After that you can ofcourse install TWRP and ROOT your device. Temporary you can use CSC Selection for S8 ROM's by tkkg1994 to get your country CSC but idk do VoLTE will works for all then.​
Click to expand...
Click to collapse

Reserved

Reserved Again

Finally!

i heard after oreo update, they cant connect to gear s3, is anyone tried?

Could there be any problems going back to Nougat after installing this one?
Might be a silly noob question but better safe then sorry! And thanks this one! Can only imagine all the good stuff u guys might build! (Debloated roms are gold <3)

mackeftw1 said:
Could there be any problems going back to Nougat after installing this one?
Might be a silly noob question but better safe then sorry! And thanks this one! Can only imagine all the good stuff u guys might build! (Debloated roms are gold <3)
Click to expand...
Click to collapse
Nope. No issues.
You can Flash any Nougat Custom Rom if you dont like the untouched system.
wait for 3-4 days then. I will make a debloated Custom ROM.

Bootloader and modem for oreo download link pleace...

Hi a question, G935F stock rom works with G935FD model? Thxs

So i have to download the twrp oreo backup of BTU 8.0 from OP and than your nougat BTU for OTA?
rifek4 said:
FLASH THIS STOCK NOUGAT FW THEN YOU WILL GET OREO 4 SURE GUYS JUST USE OTA UPDATE VIA PHONE
S7 Flat (G930F)
https://de.s2.samsungbay.com/8774/BTU-G930FXXS2DRC3-20180402085751.zip
https://ru.s1.samsungbay.com/087f/BTU-G930FXXS2DRC3-20180402085751.zip
S7 Edge (G935F)
https://de.s2.samsungbay.com/f253/BTU-G935FXXS2DRC3-20180330111551.zip
https://ru.s1.samsungbay.com/ff57/BTU-G935FXXS2DRC3-20180330111551.zip
It's BTU United Kingdom FW You can use also SamFirm to download FW but you need to install AiO-Runtimes to get it working: https://www.sereby.org/site/All in One Runtimes SamFirm is on XDA.
After that you can ofcourse install TWRP and ROOT your device. Temporary you can use CSC Selection for S8 ROM's by tkkg1994 to get your country CSC but idk do VoLTE will works for all then.​
Click to expand...
Click to collapse

Taz2016 said:
Hi a question, G935F stock rom works with G935FD model? Thxs
Click to expand...
Click to collapse
It works. I too have FD model

★彡 sílvєr kíng 彡★ said:
It works. I too have FD model
Click to expand...
Click to collapse
Ok but should install FD UK rom or F model? Sammobile or This?
Sorry for my english!

Taz2016 said:
Ok but should install FD UK rom or F model? Sammobile or This?
Sorry for my english!
Click to expand...
Click to collapse
orgetorix said:
So i have to download the twrp oreo backup of BTU 8.0 from OP and than your nougat BTU for OTA?
Click to expand...
Click to collapse
If your knox counter is intact u can follow Rifek's steps to get official oreo.
If ur knox is void u can skip the tedious odin steps and just restore TWRP Backup.

thanks!!!

★彡 sílvєr kíng 彡★ said:
If your knox counter is intact u can follow Rifek's steps to get official oreo.
If ur knox is void u can skip the tedious odin steps and just restore TWRP Backup.
Click to expand...
Click to collapse
If i root the phone and go back to stock with stock rom with odin is knox void? If i choose install twrp rom should i root too or can i leave stock without problems?

Taz2016 said:
If i root the phone and go back to stock with stock rom with odin is knox void? If i choose install twrp rom should i root too or can i leave stock without problems?
Click to expand...
Click to collapse
Your Warranty is void if you install TWRP once in your phone. Installing TWRP changes knox counter to 0x1.
It stays 0x1 even after flashing official firmware later. So dont install TWRP just for this update. Wait for official release!

★彡 sílvєr kíng 彡★ said:
Your Warranty is void if you install TWRP once in your phone. Installing TWRP changes knox counter to 0x1.
If i install UK G935F rom would show me oreo update? sorry i really update to Oreo!
Click to expand...
Click to collapse

Taz2016 said:
I have installed roms with twrp and finally i installed stock rom that's why I'm asking you which install?
Click to expand...
Click to collapse
Flash TWRP Backup then
If u flash Official Odin firmware and update to Oreo U cannot downgrade bootloader! So no more Nougat Firmware flashing.
Also you may not be able to flash your country official firmware via Odin (Bootloader Version Lock).
So play it safe and Use TWRP Backup from this thread.

★彡 sílvєr kíng 彡★ said:
Flash TWRP Backup then
If u flash Official Odin firmware and update to Oreo U cannot downgrade bootloader! So no more Nougat Firmware flashing.
Also you may not be able to flash your country official firmware via Odin (Bootloader Version Lock).
So play it safe and Use TWRP Backup from this thread.
Click to expand...
Click to collapse
Ok thanks man
---------- Post added at 01:34 PM ---------- Previous post was at 01:30 PM ----------
★彡 sílvєr kíng 彡★ said:
It works. I too have FD model
Click to expand...
Click to collapse
Dude could you post G935FD link?

cannot restore, it says "no partitions selected for restore"

Related

Firmware discussion

Oh hey guys My Father have just bough a Galaxy S7 (SM-G9308) Its a chinese model/firmware!
It has the snapdragon 820 SoC
And the firmware is very very bad!
no play store
no Google accounts no play services!!!!!!
What can I do now?
Can I flash the international SM-G930 firmware from samfirmware and flash with odin?
will it work
TIA
Hello, well first , you need to know that the edition G9308 is region specific , it is not a WCDMA but rather a TD-SDMA edition which can only be used with China Mobile operator (that is for the 4G) , and you cannot flash the international firmware on it , look for the firmware specific to your device model only. my suggestion is that you root the device and flash Gapps and get rid of the chinese bloatware. hope that helps.
urbanmec said:
Hello, well first , you need to know that the edition G9308 is region specific , it is not a WCDMA but rather a TD-SDMA edition which can only be used with China Mobile operator (that is for the 4G) , and you cannot flash the international firmware on it , look for the firmware specific to your device model only. my suggestion is that you root the device and flash Gapps and get rid of the chinese bloatware. hope that helps.
Click to expand...
Click to collapse
Thnq mate,but where can I get the gaaps from?
opengapps.org from here?
arm64 ?
and after the flash how can I get rid of the chinese bloatware?
Yasin Abir said:
Thnq mate,but where can I get the gaaps from?
opengapps.org from here?
arm64 ?
and after the flash how can I get rid of the chinese bloatware?
Click to expand...
Click to collapse
You can remove it very easily with titanium backup
Yasin Abir said:
Thnq mate,but where can I get the gaaps from?
opengapps.org from here?
arm64 ?
and after the flash how can I get rid of the chinese bloatware?
Click to expand...
Click to collapse
Did you root your device?
---------- Post added at 01:27 AM ---------- Previous post was at 01:05 AM ----------
urbanmec said:
Did you root your device?
Click to expand...
Click to collapse
I stand to correct myself , after doing some research , I think that there is a chance that you could flash the g9300 firmware on your device too, some forums say that it is possible because they have the same hardware. Sorry for my mistake , I answered at first out of safety measures so you don't brick your device. you can try following a guide on how to flash the G9300 firmware on G9308. Cheers.
urbanmec said:
Did you root your device?
---------- Post added at 01:27 AM ---------- Previous post was at 01:05 AM ----------
I stand to correct myself , after doing some research , I think that there is a chance that you could flash the g9300 firmware on your device too, some forums say that it is possible because they have the same hardware. Sorry for my mistake , I answered at first out of safety measures so you don't brick your device. you can try following a guide on how to flash the G9300 firmware on G9308. Cheers.
Click to expand...
Click to collapse
So you're saying that I can flash the G9300 firmware on my G9308 one! (using odin)
And then It will flash properly!
Then Follow These steps?
1- install CROM _V1.0.4.apk and run for unlock the bootloader.
2-install Samsung-Usb-Driver-v1.5.59.0.
3-install Odin3_v3.10.7
4-flash G9300-PC9-Auto-Root-0403_3 with odin.
5-wipe data partition in TWRP
6-install open_gapps-arm64-6.0-pico-20160329 in TWRP.
link: yadi.sk/d/tZdGHAf6rKFTm
Yasin Abir said:
So you're saying that I can flash the G9300 firmware on my G9308 one! (using odin)
And then It will flash properly!
Then Follow These steps?
1- install CROM _V1.0.4.apk and run for unlock the bootloader.
2-install Samsung-Usb-Driver-v1.5.59.0.
3-install Odin3_v3.10.7
4-flash G9300-PC9-Auto-Root-0403_3 with odin.
5-wipe data partition in TWRP
6-install open_gapps-arm64-6.0-pico-20160329 in TWRP.
link: yadi.sk/d/tZdGHAf6rKFTm
Click to expand...
Click to collapse
Those steps are for root and install of Gapps , but what I am saying is downloading the Entire firmware of G9300 and flash it via odin and it will transform your phone into G9300 (which has multilanguage and Gapps natively installed). (no root needed in this case , just get the G9300 firmware and follow the correct steps to flash it via Odin)
As for the bootloader, I think the chinese edition is unlocked. Check it first.

How to update s7 to nougat without losing root?

Hi, can galaxy s7 be updated to nougat without losing root. Has anyone tried it with flashfire? I have a rooted s7 marshmallow but wish to update without losing root or wiping.
Nougat is already here.. my 2 gs7 edge were update last week
Sent from my SC-02H using Tapatalk
That is not the question. I want to know if/how i can update my s7 G930F to nougat without losing my root for example trough flashfire
francisamarsingh said:
Nougat is already here.. my 2 gs7 edge were update last week
Sent from my SC-02H using Tapatalk
Click to expand...
Click to collapse
lil_y said:
That is not the question. I want to know if/how i can update my s7 G930F to nougat without losing my root for example trough flashfire
Click to expand...
Click to collapse
You could have updated and then re-rooted again by now
Think its possible if you download a pre-rooted rom.
Yes i know the other possibilities, but i don't want to lose my data and install everything again, thats why i want to know if it is possible to update without losing root and wiping. With flashfire it was possible to that on marshmallow but i dont know if it wil work if i update to nougat
francisamarsingh said:
Nougat is already here.. my 2 gs7 edge were update last week
Click to expand...
Click to collapse
Which carrier and what version? I have THE SM-G930U and have yet to receive nougat.
---------- Post added at 07:07 AM ---------- Previous post was at 07:02 AM ----------
lil_y said:
Yes i know the other possibilities, but i don't want to lose my data and install everything again, thats why i want to know if it is possible to update without losing root and wiping. With flashfire it was possible to that on marshmallow but i dont know if it wil work if i update to nougat
Click to expand...
Click to collapse
Unfortunately no, you'd have to Odin back to stock in order to take the updates.
I am on Japanese telco docomo, GS7 edge SC-02H
Mike00700 said:
Does somebody know how to remove cache from touchwiz?
Click to expand...
Click to collapse
Go to settings, apps, click 3 dots and default apps and choose another launcher app lol
whbisondtr said:
Which carrier and what version? I have THE SM-G930U and have yet to receive nougat.
---------- Post added at 07:07 AM ---------- Previous post was at 07:02 AM ----------
Unfortunately no, you'd have to Odin back to stock in order to take the updates.
Click to expand...
Click to collapse
Sent from my SC-02H using Tapatalk
I have seen that it is possible with other phones by updating with flashfire but i want to know if it works fine for the s7 too...
Still no solution -_-
I upgrade between nougat firmware using flashfire and just put the SuperSU/Magisk(switched to Magisk recently, both work) zip in the flash chain. So it works. Not sure about marshmallow to nougat though.
Steps to update....?
Would you be so kind as to provide us the steps to updating with stock ROM? I have a rooted S7 with Magisk/TWRP that I would like to update (without losing root) to the latest stock ROM from Samsung.
It would be greatly appreciated!
M.
CurtisMJ said:
I upgrade between nougat firmware using flashfire and just put the SuperSU/Magisk(switched to Magisk recently, both work) zip in the flash chain. So it works. Not sure about marshmallow to nougat though.
Click to expand...
Click to collapse
Mike022465 said:
Would you be so kind as to provide us the steps to updating with stock ROM? I have a rooted S7 with Magisk/TWRP that I would like to update (without losing root) to the latest stock ROM from Samsung.
It would be greatly appreciated!
M.
Click to expand...
Click to collapse
Note: You still need a PC to flash the bootloader and modem with Odin, but that might not be necessary for smaller updates. This may not work too well coming from MM to Nougat.
In Flashfire, add the AP file only from the ROM. Next, add a HOME_CSC file from your current CSC and make sure it says "Process cache". You can mix HOME_CSC files from any region with newer firmware marked for any other region. Extremely old HOME_CSC files will likely break the newest firmware though. Make sure to turn off EverRoot if you intend to use Magisk, in which case you should add the Magisk zip to the flash chain.(don't use v13 yet). Add any other mods you typically flash here (eg. I have a zip which disables tima in build.prop to keep encryption working) Also make sure "Preserve recovery" is on. Set the device to shutdown when done. (Download mode won't work when booted into by Flashfire. It's a bug) Next boot into download mode and flash the BL and CP files from the firmware package with Odin and reboot. It might boot back into TWRP, in which case just boot into system.
You're awesome, Curtis!
Though I'm still scratching my head: so even though I have Magisk/TWRP already installed on Nougat (to gain root access) and I wish to update with the latest Nougat ROM from Samsung that was just posted on sammobile 2 days ago, am I correct in saying that I would STILL have to install Flashfire and EverRoot for this process to work?
Thank you for your tutelage and patience.
M.
CurtisMJ said:
Note: You still need a PC to flash the bootloader and modem with Odin, but that might not be necessary for smaller updates. This may not work too well coming from MM to Nougat.
In Flashfire, add the AP file only from the ROM. Next, add a HOME_CSC file from your current CSC and make sure it says "Process cache". You can mix HOME_CSC files from any region with newer firmware marked for any other region. Extremely old HOME_CSC files will likely break the newest firmware though. Make sure to turn off EverRoot if you intend to use Magisk, in which case you should add the Magisk zip to the flash chain.(don't use v13 yet). Add any other mods you typically flash here (eg. I have a zip which disables tima in build.prop to keep encryption working) Also make sure "Preserve recovery" is on. Set the device to shutdown when done. (Download mode won't work when booted into by Flashfire. It's a bug) Next boot into download mode and flash the BL and CP files from the firmware package with Odin and reboot. It might boot back into TWRP, in which case just boot into system.
Click to expand...
Click to collapse
EverRoot injects SuperSU, basically as if by CF AutoRoot. Magisk has it's own rooting solution, which despite being compatible with SuperSU will likely fail safetynet if Supersu is installed. Also I have no idea which order it will flash them in so I can't predict the outcome here...
Basically. If you want SuperSU use EverRoot. If you want Magisk, disable it and use the Magisk zip. Both will grant root access when done.

// SM-G950F \\ Galaxy S8 OREO (WIPE & No WIPE) *Stock Firmware G950FXXU1CRB7_DBT&ITV

// SM-G950F \\ Galaxy S8 OREO (WIPE & No WIPE) *Stock Firmware G950FXXU1CRB7_DBT&ITV
Stock OREO Original Firmware G950FXXU1CRB7_DBT base
WIPE version https://mega.nz/#!zcURHACT!QvW_T0cFadZ44-5E4ERXukP8WLMaHqrmfkXK8JNPiRM
No WIPE version https://mega.nz/#!CZdSkLrA!_hF6bamESDj-bOl5yla0rOOMNti5ydYJM3e5Bbr_rgo
Inside the archive you will also find Prince Comsy's modified Odin to load them.
P.S. I downloaded the original files via samfirm, inside there were LZ4 files that I worked as explained in the post of @ murtaza02 (which I thank)
Greetings
Ciccio80
Update 28/02/2014:
Stock OREO Original Firmware G950FXXU1CRB7_ITV base
NO WIPE version https://mega.nz/#!rVUTCSbA!QrgMb9-Zct0f_OMWsKbIzcEFDK8-k4faoqDk556EfdI
inside the archive you will find the latest version of odin working with the new compressed LZ4 files.
Greetings
Ciccio80
Updated with mega link of "No Wipe" version
thank you...testing now
Is this S8 or S8+?
Knox316 said:
Is this S8 or S8+?
Click to expand...
Click to collapse
S8
I've got a SM-G950F (S8) with LUX CSC, could I flash it without any risk ? And without lose data ?
is possible from latest AQK7 itv or we need AQL5 to flash this?
After flash i will receive the future OTA of my own country?
Instaled it from aqk7 and it worked
imax95 said:
is possible from latest AQK7 itv or we need AQL5 to flash this?
Yes it possible
After flash i will receive the future OTA of my own country?
Click to expand...
Click to collapse
Yes for all questions
tagdevil said:
I've got a SM-G950F (S8) with LUX CSC, could I flash it without any risk ? And without lose data ?
Click to expand...
Click to collapse
yes you can flash.
if you don't want lose data you must flash NO WIPE version
ciccio80 said:
yes you can flash.
if you don't want lose data you must flash NO WIPE version
Click to expand...
Click to collapse
Great, and no risk of brick ? Will I get OTA ?
tagdevil said:
Great, and no risk of brick ? Will I get OTA ?
Click to expand...
Click to collapse
No brick and your receive OTA without problem
Nice ! So I just flash with Odin ?
Sorry It's my new mobile, I don't won't to do something wrong
Great, this is what i was waiting.
I done a full wipe was aqk7
Hi,
It will work on FD version?
Thx
dexxa05 said:
Hi,
It will work on FD version?
Thx
Click to expand...
Click to collapse
yes on S8 FD version
Hello
works with 950FD it recognizes well the 2 sim
@ciccio80
I am on latest AQK7, should we clear the cache after flash, or flashing with no wipe is enough to avoid any issue.
Compyy23 said:
@ciccio80
I am on latest AQK7, should we clear the cache after flash, or flashing with no wipe is enough to avoid any issue.
Click to expand...
Click to collapse
I l, before flash, normally first delete the cache from settings / device maintenance / Storage memory and then flash the "no wipe" version

How to downgrade O-->N

Hi!
I am now on rooted Oreo ROM.
How to downgrade to any Nougat ROM?
I have problem with flashing Stock rom via Odin.
Everytime Fail.
Any solutions please?
hakom said:
Hi!
I am now on rooted Oreo ROM.
How to downgrade to any Nougat ROM?
I have problem with flashing Stock rom via Odin.
Everytime Fail.
Any solutions please?
Click to expand...
Click to collapse
Hello
You cannot go from V3 boot loader (Oreo) to V2 boot loader (Nougat). Did you have stock Oreo installed?
cooltt said:
Hello
You cannot go from V3 boot loader (Oreo) to V2 boot loader (Nougat). Did you have stock Oreo installed?
Click to expand...
Click to collapse
Hello!
No,im on LightRom by jash92duster.
I have tryied flash stock Oreo via Odin,
but everytime fails...
I want definitely back to Nougat.
hakom said:
Hello!
No,im on LightRom by jash92duster.
I have tryied flash stock Oreo via Odin,
but everytime fails...
Click to expand...
Click to collapse
You have to flash the correct firmware for your country. What country are you in?
cooltt said:
You have to flash the correct firmware for your country. What country are you in?
Click to expand...
Click to collapse
My country is Slovak Republic.
hakom said:
My country is Slovak Republic.
Click to expand...
Click to collapse
Ok, LiteRom is Nougat 7
Option 1
Flash TWRP via Odin then flash LiteRom or any Nougat Rom
Option 2 (Easy)
Place phone in download mode (home+volume down+power) then flash Stock Nougat (via Odin) for your country Slovakia (TMS) from www.sammobile.com
cooltt said:
Ok, LiteRom is Nougat 7
Option 1
Flash TWRP via Odin then flash LiteRom or any Nougat Rom
Option 2 (Easy)
Place phone in download mode (home+volume down+power) then flash Stock Nougat (via Odin) for your country Slovakia (TMS) from www.sammobile.com
Click to expand...
Click to collapse
No, i have LiteRom v. Oreo.
I have latest TWRP of course too.
Bootloader apparently prevents downgrade via Odin, but you can still downgrade via TWRP. You need to flash a custom nougat ROM that includes an older bootloader version.
Odin 3.13. and latest Nougat ROM available for your phone.
Did downgrade without any issues.
saszynski said:
Odin 3.13. and latest Nougat ROM available for your phone.
Did downgrade without any issues.
Click to expand...
Click to collapse
I tried flash Stock Rom via Odin-->Failed.
I tried flash several Nougat Rom via TWRP, but after Rom boot i got No Service (no signal).
After have i tried flash latest Nougat BL separately but i got error: sv rev. check fail (bootloader) device:3, binary:2 in download mode.
Any ideas please?
You can't downgrade the bootloader.
Stock nougat on an Oreo bootloader will cause problems with wifi, data, and possibly lose the IMEI.
audit13 said:
You can't downgrade the bootloader.
Stock nougat on an Oreo bootloader will cause problems with wifi, data, and possibly lose the IMEI.
Click to expand...
Click to collapse
So how to downgrade to Nougat?
hakom said:
So how to downgrade to Nougat?
Click to expand...
Click to collapse
Can't be done as far as I know.
audit13 said:
Can't be done as far as I know.
Click to expand...
Click to collapse
No Way!
hakom said:
No Way!
Click to expand...
Click to collapse
Samsung blocked bootloader downgrades a long time ago. I think it started with the S3.
audit13 said:
Samsung blocked bootloader downgrades a long time ago. I think it started with the S3.
Click to expand...
Click to collapse
omg, so it's ****ed up...
You may be able to run a custom nougat rom on the Oreo bootloader but not a completely stock nougat ROM.
SOLVED!
.
.
.
.Close
How did you solved it?
Jesus Krist said:
How did you solved it?
Click to expand...
Click to collapse

OneUi Android Pie (9.0) (without Root , With Root, With Root + Xposed ) For A8 plus.

Backup First I am not responsible for anything. Backup your NVRAM NVDATA EFS to restore ur iemi .
I have Made a TWRP backup for Pie so everybody can move from Oreo to pie by Restoring Backup.
first install BL and CP of pie throw odin and then restore backup uncheck efs while restoring.
Pie (9.0) with root:
https://mega.nz/#!8BJ30IBS!Ho6iy07O3NZLyKI-A1-yWWI3qqBLH4Cix92s6fyAw_Y
Pie (9.0) with root+xposed:
https://mega.nz/#!cBYnwYDL!Sc2QuTOLi257erZfKtX3aBZltSAtqfXxxvG06EFlxr8
CP and BL for Pie and Odin:
https://mega.nz/#!FEZhmATR!xb1LLR5npE4EwpZCBZhpP0jrBy0fgctKKIJsgtMHG9k
ajnajao1 said:
Removed
Click to expand...
Click to collapse
Why did you remove this?
Where link without root?
freemod said:
Where link without root?
Click to expand...
Click to collapse
Use file with Root and use magisk uninstaller to remove root.
ajnajao1 said:
Backup First I am not responsible for anything. Backup your NVRAM NVDATA .
I have Made a TWRP backup for Pie so everybody can move from Oreo to pie by Restoring Backup.
first install BL and CP throw odin and then restore backup
Pie (9.0) with root:
https://mega.nz/#!8BJ30IBS!Ho6iy07O3NZLyKI-A1-yWWI3qqBLH4Cix92s6fyAw_Y
Pie (9.0) with root+xposed:
https://mega.nz/#!cBYnwYDL!Sc2QuTOLi257erZfKtX3aBZltSAtqfXxxvG06EFlxr8
CP and BL for Pie and Odin:
https://mega.nz/#!FEZhmATR!xb1LLR5npE4EwpZCBZhpP0jrBy0fgctKKIJsgtMHG9k
Click to expand...
Click to collapse
How did you root pie?
I have decided to share screenshots
I'm a us user as you can see I have volte working and I got Dolby working .
Make sure you have the latest Oreo bootloader installed this so can down grade to Oreo if I want to.
Do not flash pie modems if you do you will have to flash pie bootloader.
If you have a bootloader example
Xxu3 you need flash ap system and bootloader xxs4.
This not for flashing this build but for flashing pie on Odin
Restore.
Restoring with selected EFS damaged original IMEI.... Without is it ok. Thanks!
when I went to install the stock gave error of dm-verify
Help me!!
RuizLenatoh said:
when I went to install the stock gave error of dm-verify
Help me!!
Click to expand...
Click to collapse
Specify your question. what are you asking>?
ajnajao1 said:
Specify your question. what are you asking>?
Click to expand...
Click to collapse
Do you have a telegram? so I can talk to you better
mchlbenner said:
I have decided to share screenshots
I'm a us user as you can see I have volte working and I got Dolby working .
Make sure you have the latest Oreo bootloader installed this so can down grade to Oreo if I want to.
Do not flash pie modems if you do you will have to flash pie bootloader.
If you have a bootloader example
Xxu3 you need flash ap system and bootloader xxs4.
This not for flashing this build but for flashing pie on Odin
Click to expand...
Click to collapse
How do I flash and does this work for my country?
Bad.Server said:
How do I flash and does this work for my country?
Click to expand...
Click to collapse
Depends on which country.
I'm using Canada csc it works on USA and Canada.
ت
mchlbenner said:
Depends on which country.
I'm using Canada csc it works on USA and Canada.
Click to expand...
Click to collapse
I'm from the Philippines and I don't know how this would work.... should flash the Philippine csc from the 8.0 update er. Sorry I'm completely clueless on how this works, all I know is flashing them.
Bad.Server said:
I'm from the Philippines and I don't know how this would work.... should flash the Philippine csc from the 8.0 update er. Sorry I'm completely clueless on how this works, all I know is flashing them.
Click to expand...
Click to collapse
Depends on what you want to get out of your phone.
I'm rooted so I had to use this canda csc.
For ab+ their no USA build I want have volte.
This csc I flash is done through twrp.
If your stock no root ect and you get what the services you want then go a head and do it.
If you are rooted and want to keep root then I would not.
mchlbenner said:
Depends on what you want to get out of your phone.
I'm rooted so I had to use this canda csc.
For ab+ their no USA build I want have volte.
This csc I flash is done through twrp.
If your stock no root ect and you get what the services you want then go a head and do it.
If you are rooted and want to keep root then I would not.
Click to expand...
Click to collapse
How do flash it though? I extracted the .zip file but it doesnt have the files to be flashed through Odin. Also I think I should tell you that my phone or rather knoxs tells's me that my phone is rooted but I've already flashed the non-rooted stock rom years ago because I failed when I tried to root my phone before and I don't know how to fix my mistake and gain root. If its not too much to ask, I would like to ask for your help, I would greatly appreciate it.
Bad.Server said:
How do flash it though? I extracted the .zip file but it doesnt have the files to be flashed through Odin. Also I think I should tell you that my phone or rather knoxs tells's me that my phone is rooted but I've already flashed the non-rooted stock rom years ago because I failed when I tried to root my phone before and I don't know how to fix my mistake and gain root. If its not too much to ask, I would like to ask for your help, I would greatly appreciate it.
Click to expand...
Click to collapse
It is a twrp back so it has to be flash with twrp.

Categories

Resources