Database Info

[ROOT][SM-T53X,SM-T33X][CF-AUTO-ROOT][Simplest method to get ROOT now for 5.02-5.1.1]

Hi folks . Dear @Chainfire update your CF-Auto-Root base and now we get opportunity to have root with the simplest method ! It works now on 5.02 and 5.1.1 stock firmwares . Sorry but knox is tripped .
Now this works on SM-T530 , SM-T530NU , SM-T535 , SM-T532 , SM-T533 ,SM-T330NU , SM-T331
Complete list you can see on https://autoroot.chainfire.eu/ .
HOW INSTALL :
BASIC INSTRUCTIONS
All downloads contain .tar.md5 files flashable in ODIN as PDA(AP)
Make sure your device is in ODIN download mode (usually you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin file, press the PDA(AP) button, select the .tar.md5 file, and click Start. You can find more detailed instructions and assistance at XDA.
A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.
For the root to work, the device must reboot into recovery. Most devices will do this automatically after flashing these files, but in case that does not happen, please boot into recovery manually.
DOWNLOADS:
SM-T530
SM-T530NU
SM-T533
SM-T535
SM-T330NU
SM-T331

Added SM-T330NU and SM-T331

worked on 533 but are we now able to install twrp permanent?? anyway thanks a lot for root!

looking-g said:
worked on 533 but are we now able to install twrp permanent?? anyway thanks a lot for root!
Click to expand...
Click to collapse
You better ask @HausiX10 about this in PM .

Wow thank you for this! I successfully rooted my Tab 4 SM-T330NU using 5.1.1 on the first attempt with the files provided here. I had been trying all weekend to successful root my device using other methods and files, but for some reason they all resulted in bootloops. I kept reading through the troubleshoot forums for a solution, but nothing worked. I wish I would have found this thread sooner, it would have saved me a lot of problems!

bootloop
Hi I'm stuck in bootloop; set warranty bit: kernel. Any solutions?

Still working?

"You can find more detailed instructions and assistance at XDA." Mhm, I am on XDA so where are that detailed instructions? And when I finished root Unified daemon, Media memory and TouchWiz - home are stopping working. Is it normal?

I need sm-t537v please

What about the bootloader?
repey6 said:
Hi folks . Dear @Chainfire update your CF-Auto-Root base and now we get opportunity to have root with the simplest method ! It works now on 5.02 and 5.1.1 stock firmwares . Sorry but knox is tripped .
Now this works on SM-T530 , SM-T530NU , SM-T535 , SM-T532 , SM-T533 ,SM-T330NU , SM-T331
Complete list you can see on https://autoroot.chainfire.eu/ .
HOW INSTALL :
BASIC INSTRUCTIONS
All downloads contain .tar.md5 files flashable in ODIN as PDA(AP)
Make sure your device is in ODIN download mode (usually you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin file, press the PDA(AP) button, select the .tar.md5 file, and click Start. You can find more detailed instructions and assistance at XDA.
A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.
For the root to work, the device must reboot into recovery. Most devices will do this automatically after flashing these files, but in case that does not happen, please boot into recovery manually.
DOWNLOADS:
SM-T530
SM-T530NU
SM-T533
SM-T535
SM-T330NU
SM-T331
Click to expand...
Click to collapse
Hi @repey6. Thanks for the tutorial.
Do you know if I need to worry about unlocking the bootloader on my device? It's a SM-T531 (Brazil) running 4.4.2.
@Chainfire's auto-root page warns that flashing the auto-root with the bootloader locked will probably brick it, but I'm so noob that I don't even know if mine is locked or not. I can only imagine that it is, since I haven't done anything close to flashing anything on this device.
Thanks for your attention.

BourbonCowboy said:
Hi @repey6. Thanks for the tutorial.
Do you know if I need to worry about unlocking the bootloader on my device? It's a SM-T531 (Brazil) running 4.4.2.
@Chainfire's auto-root page warns that flashing the auto-root with the bootloader locked will probably brick it, but I'm so noob that I don't even know if mine is locked or not. I can only imagine that it is, since I haven't done anything close to flashing anything on this device.
Thanks for your attention.
Click to expand...
Click to collapse
Hi. Your bootloader is not unlocking. But supersu is not actual now. Magisk root is better.

So how to I unlock it?
repey6 said:
Hi. Your bootloader is not unlocking. But supersu is not actual now. Magisk root is better.
Click to expand...
Click to collapse
Thanks for the answer! So, how do I unlock the bootloader then? Haven't been able to find it here in XDA. Also, I've found a post here on the forum where a user claimed Magisk didn't work in 5.0.2 because the kernel was too old. Do you know if Towelroot is better?
Pls help. :crying:

BourbonCowboy said:
So how to I unlock it?
Thanks for the answer! So, how do I unlock the bootloader then? Haven't been able to find it here in XDA. Also, I've found a post here on the forum where a user claimed Magisk didn't work in 5.0.2 because the kernel was too old. Do you know if Towelroot is better?
Pls help. :crying:
Click to expand...
Click to collapse
have you found a solution? same problem here!!!!!!!!!!!!!

[Guide] Root Oppo R9tm/X9009 F1 Plus Marshmallow D.01

Prerequisites: root permission.
Before to start make a full backup of everything! I cannot warranty this method is working in every phone, actually tested only with the r9tm variant.
With the X9009 and r9 variant must be tested!!
Make attention!! This procedure can brick your device!!
Procedure:
1. Flash this TWRP with Rashr. http://www.mediafire.com/file/e76ptigzjcg4i07/UNOFFICIAL-TWRP-3.1.1_X9009.img
2. Reboot into recovery. (At the first boot the screen can remain black, to solve just press the power button 2 times, then in settings change the brightness different from 100%. )
3. Connect the usb cable and copy the marshmallow zip (R9 variant) http://www.oppo.com/au/supports/announcement/test
4. Copy this file to fix the systemui root warning http://www.mediafire.com/file/9nxmc64x4gm6xro/SystemUI_OppoF1Plus_X9009_LP_MM_TWRP.zip
5. Copy the latest Supersu zip installer (tested v82) http://www.supersu.com/download
6. Backup Nvram and Nvdata
7 Flash the marshmallow rom (Do not consider the final error about the wipe data)
8. make a full wipe data (advanced wipe: select data, cache and dalvik)
9. Flash the supersu
10. Flash SysteUI fix
11. Reboot (First boot will take 10 minutes)
12. If the IMEI is missing, reboot in recovery and restore the nvram and nvdata
13. Enjoy
Release: beta1

Twrp is very good, root is perfect with modified systemui. But I have a nonsense problem that black screen after screen unlock. And I know that it is boot.img related issue. When i flash r9m mm boot.img it is working but no sim. And both r9tm and x9009 6.0 mm firmware, fingerprint is not working.
On 5.1 x9009 i have no issue all is working perfect.

I dont know the threater point. He said Prerequisites: root permission
But everyone here want to root
But he said that for what? ?

xk3v1lx said:
I dont know the threater point. He said Prerequisites: root permission
But everyone here want to root
But he said that for what?
Click to expand...
Click to collapse
Saying that downgrade your system, root your device than reupdate with this procedure, if you want root on marshmallow.
or flash unofficial TWRP3.1 recovery via flash tool , than finish Luxios's tutorial, this is the best way

Oh i see
Thanks
But now how to downgrade F1 plus? Oppo locked this feature that i am not able to root it ?
Line: ttddzz

https://vnrom.net/2016/10/free-rom-stock-oppo-f1-plus-x9009-flashtool-ok/
here is a flashtool rom for F1 Plus download and flash it
https://forum.xda-developers.com/op...-f1plus-irgent-spflashtool-rom-t3516145/page9
and here is a tutorial about it(you dont need to change META.INF).

emreagacli said:
https://vnrom.net/2016/10/free-rom-stock-oppo-f1-plus-x9009-flashtool-ok/
here is a flashtool rom for F1 Plus download and flash it
https://forum.xda-developers.com/op...-f1plus-irgent-spflashtool-rom-t3516145/page9
and here is a tutorial about it(you dont need to change META.INF).
Click to expand...
Click to collapse
Sorry
It getting error 0xc0020029
...Vietnamese User...

Use modified mtk_allinone_da.bin . this is the most important think to flash.

I dont know how to modified it ?
...Vietnamese User...

if you read the subject , you don't need to modify, it is modified.
4_ Use this custom DA file: http://www.mediafire.com/file/69l8nxs22r24m7f/MTK_AllInOne_DA.bin

emreagacli said:
if you read the subject , you don't need to modify, it is modified.
4_ Use this custom DA file: http://www.mediafire.com/file/69l8nxs22r24m7f/MTK_AllInOne_DA.bin
Click to expand...
Click to collapse
Thanks
Let me try ?
...Vietnamese User...

has anyone tried it?

I am using 27.05 firmware with root on my r9tm device. I have flashed Luxios's recovery via şp flash tool than installed latest supersu via twrp. Systemui trick didnt work fir me but no need to it on 27.05 firmware.

emreagacli said:
I am using 27.05 firmware with root on my r9tm device. I have flashed Luxios's recovery via şp flash tool than installed latest supersu via twrp. Systemui trick didnt work fir me but no need to it on 27.05 firmware.
Click to expand...
Click to collapse
is that mm? or lp?

x.nallydb28 said:
has anyone tried it?
Click to expand...
Click to collapse
My X9009 was bricked (only virbrate when start) due to flash in a wrong way (Format and Download)
I sent it to warranty center and wait
They said "main error"
? nothing to say...
PS: i did that before trying to use modified DA bin. I will try after take it back
...Vietnamese User...

emreagacli said:
I am using 27.05 firmware with root on my r9tm device. I have flashed Luxios's recovery via şp flash tool than installed latest supersu via twrp. Systemui trick didnt work fir me but no need to it on 27.05 firmware.
Click to expand...
Click to collapse
xk3v1lx said:
My X9009 was bricked (only virbrate when start) due to flash in a wrong way (Format and Download)
I sent it to warranty center and wait
They said "main error"
nothing to say...
PS: i did that before trying to use modified DA bin. I will try after take it back
...Vietnamese User...
Click to expand...
Click to collapse
Sorry to hear that mate. Still waiting to someone who have already tried this procedure.

İt was not problem ypu could reflash via custom da file.
---------- Post added at 02:26 PM ---------- Previous post was at 02:01 PM ----------
x.nallydb28 said:
is that mm? or lp?
Click to expand...
Click to collapse
Lp

emreagacli said:
İt was not problem ypu could reflash via custom da file.
---------- Post added at 02:26 PM ---------- Previous post was at 02:01 PM ----------
Lp
Click to expand...
Click to collapse
So I can still downgrade my x9009EX to LP??

I am making it every time. The most important thing is , using custom da.bin file.

emreagacli said:
I am making it every time. The most important thing is , using custom da.bin file.
Click to expand...
Click to collapse
I'm on MM now, how can I flash it? Do I need to flash something to activate the fastboot on my F1 Plus?

Miui 8 Android 6.x.x for AL10 anyone owner AL10 try?

I see this in huawei club, base on EMUI4.1 android 6
http://club.huawei.com/thread-13621443-1-1.html
Link tải:
1. ROM
2. SuperSU HONOR8 FRD MIUI
3. Honor8-FRD-fix-cdma-audio-for-miui8

I tried yesterday, everything works properly.
PS:
If your model is not AL10, you need to flash C00AL10B175 update.zip first, and then flash this rom by chinese twrp.
C00Al10B175 uodate.zip：http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1276/g104/v69787/f1/full/update.zip
chinese twrp：
http://pan.baidu.com/s/1c1QfhlQ

[email protected] said:
I tried yesterday, everything works properly.
PS:
If your model is not AL00, you need to flash C00AL10B175 update.zip first, and then flash this rom by chinese twrp.
C00Al10B175 uodate.zip：http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1276/g104/v69787/f1/full/update.zip
chinese twrp：
http://pan.baidu.com/s/1c1QfhlQ
Click to expand...
Click to collapse
ah yes, this mod twrp have mounted for flash cust partition

blackbuffalo said:
ah yes, this mod twrp have mounted for flash cust partition
Click to expand...
Click to collapse
Yes.
But there are some bugs,such as sim1 singnal always full, and some little issues.

Signal always full on SIM¹ because Openkirin didn't find the solution for accurate signal reading for now (they need to update tree device once they fix it).
That's why it is present in other ROMs

[email protected] said:
I tried yesterday, everything works properly.
PS:
If your model is not AL10, you need to flash C00AL10B175 update.zip first, and then flash this rom by chinese twrp.
C00Al10B175 uodate.zip：http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1276/g104/v69787/f1/full/update.zip
chinese twrp：
http://pan.baidu.com/s/1c1QfhlQ
Click to expand...
Click to collapse
any option for English language ?

I think they used the chinese patch ROM, they should use the global one if they want english to be present

[email protected] said:
I tried yesterday, everything works properly.
PS:
If your model is not AL10, you need to flash C00AL10B175 update.zip first, and then flash this rom by chinese twrp.
C00Al10B175 uodate.zip：http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1276/g104/v69787/f1/full/update.zip
chinese twrp：
http://pan.baidu.com/s/1c1QfhlQ
Click to expand...
Click to collapse
please tell the excact steps to flash the ROM ?

venugopalu007 said:
please tell the excact steps to flash the ROM ?
Click to expand...
Click to collapse
You need to rebrand to C00AL10B175, then flash the ROM with the chinese TWRP

venugopalu007 said:
please tell the excact steps to flash the ROM ?
Click to expand...
Click to collapse
OK
1. Downgrade to EMUI4.1.
2. Flash C00B175(update.zip) via twrp.
3. Reboot.
4. Install TWRP(Chinese version).
5. Flash MIUI via twrp.
---------- Post added at 01:17 AM ---------- Previous post was at 01:04 AM ----------
PalakMi said:
Signal always full on SIM¹ because Openkirin didn't find the solution for accurate signal reading for now (they need to update tree device once they fix it).
That's why it is present in other ROMs
Click to expand...
Click to collapse
em.
It's a patched rom based on B175.

[email protected] said:
OK
1. Downgrade to EMUI4.1.
2. Flash C00B175(update.zip) via twrp.
3. Reboot.
4. Install TWRP(Chinese version).
5. Flash MIUI via twrp.
---------- Post added at 01:17 AM ---------- Previous post was at 01:04 AM ----------
em.
It's a patched rom based on B175.
Click to expand...
Click to collapse
it worked but the sim is always flickering like it is connecting and disconnecting so i again came back

One question: can I install this ROM in my AL09 or not?

Garfanki said:
One question: can I install this ROM in my AL09 or not?
Click to expand...
Click to collapse
Al09 does it exists??
If yes install the al00 firmware dirst and then install miui

venugopalu007 said:
Al09 does it exists??
If yes install the al00 firmware dirst and then install miui
Click to expand...
Click to collapse
Hi, thanks. Yes, exists, FRD-L09. What did you mean AL00 firmware? I must search for EMUI 4.1 AL00 firmware? Sorry, but I don't understand...

Garfanki said:
Hi, thanks. Yes, exists, FRD-L09. What did you mean AL00 firmware? I must search for EMUI 4.1 AL00 firmware? Sorry, but I don't understand...
Click to expand...
Click to collapse
See the second post and there is zip flash it and then flash miui rom

Thanks, I see the zip in the second post but it's for AL10, or not?

Garfanki said:
Thanks, I see the zip in the second post but it's for AL10, or not?
Click to expand...
Click to collapse
if you want to flash the miui u first had to flash the zip in the second post

I thought it was based on LOS, sorry, my bad

venugopalu007 said:
if you want to flash the miui u first had to flash the zip in the second post
Click to expand...
Click to collapse
Ok, I can use twrp already present in my smartphone?

Garfanki said:
Ok, I can use twrp already present in my smartphone?
Click to expand...
Click to collapse
You should be on the chinese TWRP in order to flash this ROM

[TWRP] [OREO] [OFFICIAL] R16NWG935FXXU2ERD5 BTU Firmware Dump

Edit: Got Bootloader Files just now. Will include it in my upcoming custom ROM
Will keep it short. Nobody wants to read big stuffs anyways
Do this if your Knox counter is already 0x1
S7 Flat users go here https://forum.xda-developers.com/ga...u-firmware-t3784565/post76391260#post76391260
Here u go guys,
The Ofiicial Oreo firmware R16NWG935FXXU2ERD5
- Its a TWRP Backup
- Contains UNTOUCHED System,Baseband and boot image.
Steps:
- Extract zip to your External SD
- Reboot to TWRP
- Wipe system, data, internal sd etc etc (what you do usually when flashing a rom)
- Restore> R16NWG935FXXU2ERD5
- Flash no verity zip
- Flash Magisk
- Flash your Country CSC (Use S8 Port CSC for now)
-Reboot
Download link : https://mega.nz/#!URswBJ5A!ThOBn4u7dZYQGEo6BueKCtL-BS1gqzsLgMWlSaYrJ-c
This is only for people who dont want to wait for official OTA and for Devs who wants to make a ROM now
The official firmware might get uploaded on sammobile after 2-3 days
The backup is untouched so everything is present in this (bloat and useless apps too)
Debloat apps with titanium backup and report back if u face any issues.
Make sure to debloat SecuritylogAgent. It keeps bugging you that unauthorised actions have been detected and stuff lol
If your knox is intact or dont like dumps then follow Rifek's Guide
rifek4 said:
FLASH THIS STOCK NOUGAT FW THEN YOU WILL GET OREO 4 SURE GUYS JUST USE OTA UPDATE VIA PHONE
S7 Flat (G930F)
https://de.s2.samsungbay.com/8774/BTU-G930FXXS2DRC3-20180402085751.zip
https://ru.s1.samsungbay.com/087f/BTU-G930FXXS2DRC3-20180402085751.zip
S7 Edge (G935F)
https://de.s2.samsungbay.com/f253/BTU-G935FXXS2DRC3-20180330111551.zip
https://ru.s1.samsungbay.com/ff57/BTU-G935FXXS2DRC3-20180330111551.zip
It's BTU United Kingdom FW You can use also SamFirm to download FW but you need to install AiO-Runtimes to get it working: https://www.sereby.org/site/All in One Runtimes SamFirm is on XDA.
After that you can ofcourse install TWRP and ROOT your device. Temporary you can use CSC Selection for S8 ROM's by tkkg1994 to get your country CSC but idk do VoLTE will works for all then.​
Click to expand...
Click to collapse

Reserved

Reserved Again

Finally!

i heard after oreo update, they cant connect to gear s3, is anyone tried?

Could there be any problems going back to Nougat after installing this one?
Might be a silly noob question but better safe then sorry! And thanks this one! Can only imagine all the good stuff u guys might build! (Debloated roms are gold <3)

mackeftw1 said:
Could there be any problems going back to Nougat after installing this one?
Might be a silly noob question but better safe then sorry! And thanks this one! Can only imagine all the good stuff u guys might build! (Debloated roms are gold <3)
Click to expand...
Click to collapse
Nope. No issues.
You can Flash any Nougat Custom Rom if you dont like the untouched system.
wait for 3-4 days then. I will make a debloated Custom ROM.

Bootloader and modem for oreo download link pleace...

Hi a question, G935F stock rom works with G935FD model? Thxs

So i have to download the twrp oreo backup of BTU 8.0 from OP and than your nougat BTU for OTA?
rifek4 said:
FLASH THIS STOCK NOUGAT FW THEN YOU WILL GET OREO 4 SURE GUYS JUST USE OTA UPDATE VIA PHONE
S7 Flat (G930F)
https://de.s2.samsungbay.com/8774/BTU-G930FXXS2DRC3-20180402085751.zip
https://ru.s1.samsungbay.com/087f/BTU-G930FXXS2DRC3-20180402085751.zip
S7 Edge (G935F)
https://de.s2.samsungbay.com/f253/BTU-G935FXXS2DRC3-20180330111551.zip
https://ru.s1.samsungbay.com/ff57/BTU-G935FXXS2DRC3-20180330111551.zip
It's BTU United Kingdom FW You can use also SamFirm to download FW but you need to install AiO-Runtimes to get it working: https://www.sereby.org/site/All in One Runtimes SamFirm is on XDA.
After that you can ofcourse install TWRP and ROOT your device. Temporary you can use CSC Selection for S8 ROM's by tkkg1994 to get your country CSC but idk do VoLTE will works for all then.​
Click to expand...
Click to collapse

Taz2016 said:
Hi a question, G935F stock rom works with G935FD model? Thxs
Click to expand...
Click to collapse
It works. I too have FD model

★彡 sílvєr kíng 彡★ said:
It works. I too have FD model
Click to expand...
Click to collapse
Ok but should install FD UK rom or F model? Sammobile or This?
Sorry for my english!

Taz2016 said:
Ok but should install FD UK rom or F model? Sammobile or This?
Sorry for my english!
Click to expand...
Click to collapse
orgetorix said:
So i have to download the twrp oreo backup of BTU 8.0 from OP and than your nougat BTU for OTA?
Click to expand...
Click to collapse
If your knox counter is intact u can follow Rifek's steps to get official oreo.
If ur knox is void u can skip the tedious odin steps and just restore TWRP Backup.

thanks!!!

★彡 sílvєr kíng 彡★ said:
If your knox counter is intact u can follow Rifek's steps to get official oreo.
If ur knox is void u can skip the tedious odin steps and just restore TWRP Backup.
Click to expand...
Click to collapse
If i root the phone and go back to stock with stock rom with odin is knox void? If i choose install twrp rom should i root too or can i leave stock without problems?

Taz2016 said:
If i root the phone and go back to stock with stock rom with odin is knox void? If i choose install twrp rom should i root too or can i leave stock without problems?
Click to expand...
Click to collapse
Your Warranty is void if you install TWRP once in your phone. Installing TWRP changes knox counter to 0x1.
It stays 0x1 even after flashing official firmware later. So dont install TWRP just for this update. Wait for official release!

★彡 sílvєr kíng 彡★ said:
Your Warranty is void if you install TWRP once in your phone. Installing TWRP changes knox counter to 0x1.
If i install UK G935F rom would show me oreo update? sorry i really update to Oreo!
Click to expand...
Click to collapse

Taz2016 said:
I have installed roms with twrp and finally i installed stock rom that's why I'm asking you which install?
Click to expand...
Click to collapse
Flash TWRP Backup then
If u flash Official Odin firmware and update to Oreo U cannot downgrade bootloader! So no more Nougat Firmware flashing.
Also you may not be able to flash your country official firmware via Odin (Bootloader Version Lock).
So play it safe and Use TWRP Backup from this thread.

★彡 sílvєr kíng 彡★ said:
Flash TWRP Backup then
If u flash Official Odin firmware and update to Oreo U cannot downgrade bootloader! So no more Nougat Firmware flashing.
Also you may not be able to flash your country official firmware via Odin (Bootloader Version Lock).
So play it safe and Use TWRP Backup from this thread.
Click to expand...
Click to collapse
Ok thanks man
---------- Post added at 01:34 PM ---------- Previous post was at 01:30 PM ----------
★彡 sílvєr kíng 彡★ said:
It works. I too have FD model
Click to expand...
Click to collapse
Dude could you post G935FD link?

cannot restore, it says "no partitions selected for restore"

[ROM] Vivo NEX S & NEX A China ROM and AFTool_5.1.11

Include：
1. AFTool_5.1.11 (Chinese but very simple to use this tool)
2. NEX S-PD1805_A_1.15.7 upgrade zip package
3. NEX S-PD1805_A_1.15.7_vivo_qcom_LA.UM.6.3.r4-00600_sdm845_split.tar
4. NEX S-PD1805_A_1.17.5_vivo_qcom_LA.UM.6.3.r4-00600_sdm845_split.tar
5. NEX A-PD1806_A_2.15.6_vivo_qcom_LA.UM.6.8.r1-01600-sdm670_split.tar
6. Some drivers & guides for VIVO phone or Qualcomm 9008 mode
7. Solution for a problems that may happen while using AFTool
Download link： https://a1od-my.sharepoint.com/:f:/...xNqTsE-5-1HesBarwA3lrOp6bDaW5P8DG7uQ?e=4Mjsgi

Thanks, but we want flash Global ROM on chinese phone. Do you have information about this, please?.

STEVE_MARS said:
Thanks, but we want flash Global ROM on chinese phone. Do you have information about this, please?.
Click to expand...
Click to collapse
i don't have any global rom,sorry.
if hardwares are the same, maybe we can flash global rom or India rom, even chinese rom.
9008 mode is a force flash mode,we need to have a try.

nirvanahh said:
i don't have any global rom,sorry.
if hardwares are the same, maybe we can flash global rom or India rom, even chinese rom.
9008 mode is a force flash mode,we need to have a try.
Click to expand...
Click to collapse
Here you can download latest Global rom and give it a try.
Mony other tried(myself included) both using QFIL or AF Toll but failed to do anything.
https://forum.xda-developers.com/nex/how-to/rom-vivo-nex-global-rom-1-7-18-service-t3831866

paatha13 said:
Here you can download latest Global rom and give it a try.
Mony other tried(myself included) both using QFIL or AF Toll but failed to do anything.
https://forum.xda-developers.com/nex/how-to/rom-vivo-nex-global-rom-1-7-18-service-t3831866
Click to expand...
Click to collapse
in china, there's a hacked aftool can force flash any version official rom.
I found a tool but just can flash latest rom(the version of global rom is lower than china rom,so i can not flash a global rom in my china version nex)

paatha13 said:
Here you can download latest Global rom and give it a try.
Mony other tried(myself included) both using QFIL or AF Toll but failed to do anything.
https://forum.xda-developers.com/nex/how-to/rom-vivo-nex-global-rom-1-7-18-service-t3831866
Click to expand...
Click to collapse
Can you share this tool? I'm searching a way to flash twrp

raimondomartire said:
Can you share this tool? I'm searching a way to flash twrp
Click to expand...
Click to collapse
You can't flash any version of TWRP. It has to be made specifically for the NEX S using their source code, which is currently closed.
_____________________________________________________
Updated: Good luck raimondomartire

xreactx said:
You can't flash any version of TWRP. It has to be made specifically for the NEX S using their source code, which is currently closed.
Click to expand...
Click to collapse
I don't need source code to build twrp. I made a lot of twrp for a lot of smartphone without sorces (look my open thread). I need only stock recovery to build twrp
I'll have smartphone in next 7 days andò try this or inject magisk in boot.IMG but with looked bootloader i can flash this partition only with aftool

raimondomartire said:
I don't need source code to build twrp. I made a lot of twrp for a lot of smartphone without sorces (look my open thread). I need only stock recovery to build twrp
I'll have smartphone in next 7 days andò try this or inject magisk in boot.IMG but with looked bootloader i can flash this partition only with aftool
Click to expand...
Click to collapse
see the download link，i had upload the tool

raimondomartire said:
I don't need source code to build twrp. I made a lot of twrp for a lot of smartphone without sorces (look my open thread). I need only stock recovery to build twrp
I'll have smartphone in next 7 days andò try this or inject magisk in boot.IMG but with looked bootloader i can flash this partition only with aftool
Click to expand...
Click to collapse
by the way, without unlock the Bootloader , you can do nothing with vivo phones. maybe you can use aftool force flash a unofficial recovery but you can not get in the system

raimondomartire said:
I don't need source code to build twrp. I made a lot of twrp for a lot of smartphone without sorces (look my open thread). I need only stock recovery to build twrp
I'll have smartphone in next 7 days andò try this or inject magisk in boot.IMG but with looked bootloader i can flash this partition only with aftool
Click to expand...
Click to collapse
Hi, was you able to flash a global ROM on chinese model?

novastorm18 said:
Hi, was you able to flash a global ROM on chinese model?
Click to expand...
Click to collapse
no, this tool only can flash lastest version

hi nirvanah, i m using nex s global rom right now and was just updated via OTA. the battery was a disaster... is it possible to revert back to 1.7.18 using your software?

Users instruction
Hello friends, How to activate aftool. Please anybody give us instruction to use?

ciibat said:
Hello friends, How to activate aftool. Please anybody give us instruction to use?
Click to expand...
Click to collapse
Get this and follow instructions from my video
https://drive.google.com/file/d/1tmcu0G0yJC98FlglKAxSTADs9MLK9IY1/view

Great video instructions
Thank you so much for this video. The only thing is that the Aftool version binded to the topic is totaly different with yours and dont have authorization exe file. Where to get your version of AFTool, please?

All is inside of the archive, that you have downloaded.

selferng said:
hi nirvanah, i m using nex s global rom right now and was just updated via OTA. the battery was a disaster... is it possible to revert back to 1.7.18 using your software?
Click to expand...
Click to collapse
this tool cannot downgrade...

Malaware detected with AFT english version dll aborded !!!

Checkout this...guys.... Working....
Redirect Notice
Twrp...done...