I see this in huawei club, base on EMUI4.1 android 6
http://club.huawei.com/thread-13621443-1-1.html
Link tải:
1. ROM
2. SuperSU HONOR8 FRD MIUI
3. Honor8-FRD-fix-cdma-audio-for-miui8
I tried yesterday, everything works properly.
PS:
If your model is not AL10, you need to flash C00AL10B175 update.zip first, and then flash this rom by chinese twrp.
C00Al10B175 uodate.zip：http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1276/g104/v69787/f1/full/update.zip
chinese twrp：
http://pan.baidu.com/s/1c1QfhlQ
[email protected] said:
I tried yesterday, everything works properly.
PS:
If your model is not AL00, you need to flash C00AL10B175 update.zip first, and then flash this rom by chinese twrp.
C00Al10B175 uodate.zip：http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1276/g104/v69787/f1/full/update.zip
chinese twrp：
http://pan.baidu.com/s/1c1QfhlQ
Click to expand...
Click to collapse
ah yes, this mod twrp have mounted for flash cust partition
blackbuffalo said:
ah yes, this mod twrp have mounted for flash cust partition
Click to expand...
Click to collapse
Yes.
But there are some bugs,such as sim1 singnal always full, and some little issues.
Signal always full on SIM¹ because Openkirin didn't find the solution for accurate signal reading for now (they need to update tree device once they fix it).
That's why it is present in other ROMs
[email protected] said:
I tried yesterday, everything works properly.
PS:
If your model is not AL10, you need to flash C00AL10B175 update.zip first, and then flash this rom by chinese twrp.
C00Al10B175 uodate.zip：http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1276/g104/v69787/f1/full/update.zip
chinese twrp：
http://pan.baidu.com/s/1c1QfhlQ
Click to expand...
Click to collapse
any option for English language ?
I think they used the chinese patch ROM, they should use the global one if they want english to be present
[email protected] said:
I tried yesterday, everything works properly.
PS:
If your model is not AL10, you need to flash C00AL10B175 update.zip first, and then flash this rom by chinese twrp.
C00Al10B175 uodate.zip：http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1276/g104/v69787/f1/full/update.zip
chinese twrp：
http://pan.baidu.com/s/1c1QfhlQ
Click to expand...
Click to collapse
please tell the excact steps to flash the ROM ?
venugopalu007 said:
please tell the excact steps to flash the ROM ?
Click to expand...
Click to collapse
You need to rebrand to C00AL10B175, then flash the ROM with the chinese TWRP
venugopalu007 said:
please tell the excact steps to flash the ROM ?
Click to expand...
Click to collapse
OK
1. Downgrade to EMUI4.1.
2. Flash C00B175(update.zip) via twrp.
3. Reboot.
4. Install TWRP(Chinese version).
5. Flash MIUI via twrp.
---------- Post added at 01:17 AM ---------- Previous post was at 01:04 AM ----------
PalakMi said:
Signal always full on SIM¹ because Openkirin didn't find the solution for accurate signal reading for now (they need to update tree device once they fix it).
That's why it is present in other ROMs
Click to expand...
Click to collapse
em.
It's a patched rom based on B175.
[email protected] said:
OK
1. Downgrade to EMUI4.1.
2. Flash C00B175(update.zip) via twrp.
3. Reboot.
4. Install TWRP(Chinese version).
5. Flash MIUI via twrp.
---------- Post added at 01:17 AM ---------- Previous post was at 01:04 AM ----------
em.
It's a patched rom based on B175.
Click to expand...
Click to collapse
it worked but the sim is always flickering like it is connecting and disconnecting so i again came back
One question: can I install this ROM in my AL09 or not?
Garfanki said:
One question: can I install this ROM in my AL09 or not?
Click to expand...
Click to collapse
Al09 does it exists??
If yes install the al00 firmware dirst and then install miui
venugopalu007 said:
Al09 does it exists??
If yes install the al00 firmware dirst and then install miui
Click to expand...
Click to collapse
Hi, thanks. Yes, exists, FRD-L09. What did you mean AL00 firmware? I must search for EMUI 4.1 AL00 firmware? Sorry, but I don't understand...
Garfanki said:
Hi, thanks. Yes, exists, FRD-L09. What did you mean AL00 firmware? I must search for EMUI 4.1 AL00 firmware? Sorry, but I don't understand...
Click to expand...
Click to collapse
See the second post and there is zip flash it and then flash miui rom
Thanks, I see the zip in the second post but it's for AL10, or not?
Garfanki said:
Thanks, I see the zip in the second post but it's for AL10, or not?
Click to expand...
Click to collapse
if you want to flash the miui u first had to flash the zip in the second post
I thought it was based on LOS, sorry, my bad
venugopalu007 said:
if you want to flash the miui u first had to flash the zip in the second post
Click to expand...
Click to collapse
Ok, I can use twrp already present in my smartphone?
Garfanki said:
Ok, I can use twrp already present in my smartphone?
Click to expand...
Click to collapse
You should be on the chinese TWRP in order to flash this ROM
Related
Dear friends, how way change this? (H60-L02)
china "wo" logo and chinese sound very bad
felfex said:
Dear friends, how way change this? (H60-L02)
china "wo" logo and chinese sound very bad
Click to expand...
Click to collapse
+1!
I don't have branded version "WO" of L02 but according to MiceRus from 4pda.ru you can debrand L02 by changing "oeminfo".
Debrand function added on Multi-Tool.
VirusPlus said:
I don't have branded version "WO" of L02 but according to MiceRus from 4pda.ru you can debrand L02 by changing "oeminfo".
Debrand function added on Multi-Tool.
Click to expand...
Click to collapse
With "Wo" Logo,it's H60-L02 China Unicom Custom Version,share the same code name with WCDMA Standard Version
It is said that user of custom device can try to flash EMUI2.3 B113 version(H60-L02 Standard - Chinese Version)to "turning“ the device to standard version.
FYI:
It seems that the OEMINFO partition has to match the firmware revision, at least the provided OEMINFO in the Multitool doesnt work here together with the 5.16.1 FW on L02.
From what I understood on 4PDA the same can happen with b307 vs. b310.
yes! i see multitool "debrand" option. it's worked. very very thanks.
Good for you .
felfex said:
yes! i see multitool "debrand" option. it's worked. very very thanks.
Click to expand...
Click to collapse
With what ROM did you try it and it works?
jesterhead82 said:
FYI:
It seems that the OEMINFO partition has to match the firmware revision, at least the provided OEMINFO in the Multitool doesnt work here together with the 5.16.1 FW on L02.
From what I understood on 4PDA the same can happen with b307 vs. b310.
Click to expand...
Click to collapse
myahyam said:
Good for you .
Click to expand...
Click to collapse
To all who try this method could you please feedback on which ROM did you try it and if it worked or not?
Oeminfo file isn't included on FullROM updates or OTAs, unless it is a part of other img file.
VirusPlus said:
With what ROM did you try it and it works?
To all who try this method could you please feedback on which ROM did you try it and if it worked or not?
Oeminfo file isn't included on FullROM updates or OTAs, unless it is a part of other img file.
Click to expand...
Click to collapse
5.1.16 (But after bootlop, i'm reinstall rom)
I tried on 5.1.16 and on B310 (L02), both no luck.
VirusPlus said:
With what ROM did you try it and it works?
To all who try this method could you please feedback on which ROM did you try it and if it worked or not?
Oeminfo file isn't included on FullROM updates or OTAs, unless it is a part of other img file.
Click to expand...
Click to collapse
jesterhead82 said:
I tried on 5.1.16 and on B310 (L02), both no luck.
Click to expand...
Click to collapse
Only L02 models have branded version.
Are you sure that "ADB shell" got root permissions?
Feedback from greek forums is that debrand working, thats really odd.
Did you try to do it manual and still didn't works?
VirusPlus said:
Only L02 models have branded version.
Are you sure that "ADB shell" got root permissions?
Click to expand...
Click to collapse
Yes, was able to dump and load modified + original oeminfo partitions (32MB).
VirusPlus said:
Feedback from greek forums is that debrand working, thats really odd.
Did you try to do it manual and still didn't works?
Click to expand...
Click to collapse
Had to do it manually anyway (no windows), Strange that it works for some, because I tried yesterday and today again..
I dont think that I need to wipe the device after flashing, because thats the only step I did not try out...
jesterhead82 said:
Yes, was able to dump and load modified + original oeminfo partitions (32MB).
Had to do it manually anyway (no windows), Strange that it works for some, because I tried yesterday and today again..
I dont think that I need to wipe the device after flashing, because thats the only step I did not try out...
Click to expand...
Click to collapse
i dodn't think that wipe will help.
btw did you try to reinstall full rom after debrand?
if you install it with local update you will not lost any data.
Did local update with both versions.
- Local Update with b310
- Dumped original OEMINFO
- Flashed modfied OEMINFO
- Rebooted (did only start into recovery)
Also tried 3btn upgrade after unsucessfull start. Could you post the md5sum of the image?
jesterhead82 said:
Did local update with both versions.
- Local Update with b310
- Dumped original OEMINFO
- Flashed modfied OEMINFO
- Rebooted (did only start into recovery)
Also tried 3btn upgrade after unsucessfull start. Could you post the md5sum of the image?
Click to expand...
Click to collapse
Maybe help if you do local update after flashed oeminfo.
4729986AE9146A01A9908760C9ECACBE
VirusPlus said:
Maybe help if you do local update after flashed oeminfo.
4729986AE9146A01A9908760C9ECACBE
Click to expand...
Click to collapse
Hi VirusPlus, I have another question; how do make clock center? all icons are stacked right.. firmware version 5.1.16
Dears
Which rollback should I use to roll back to mms for the version below,I tried everything no solution for me please advise
i have same version of honor 6x and roll back from here
1. So i downloaded the BLN-L24 USA Roll back package.
2. And downloaded the BLN-L24 Latest Andorid 6 update. (BLN-L24C567B110)
both FROM: http://www.huawei.com/usmobile/consu...oads/index.htm
mirzafaisal said:
i have same version of honor 6x and roll back from here
1. So i downloaded the BLN-L24 USA Roll back package.
2. And downloaded the BLN-L24 Latest Andorid 6 update. (BLN-L24C567B110)
both FROM: http://www.huawei.com/usmobile/consu...oads/index.htm
Click to expand...
Click to collapse
I tried this it says update failed due to incompatible version or something
How to rollback from N to mm my build number changed with NRD90M TEST KEY Anyone send me BLN-L22 File
bhaskarnemichand said:
How to rollback from N to mm my build number changed with NRD90M TEST KEY Anyone send me BLN-L22 File
Click to expand...
Click to collapse
Just download and Flash http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1190/g79/v70617/f1/full/update.zip
you will see that it wont boot then flash twrp and then flash the update.zip from it:good::good::good::good::good::good:
Marella ram_youtubr said:
Just download and Flash http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1190/g79/v70617/f1/full/update.zip
you will see that it wont boot then flash twrp and then flash the update.zip from it:good::good::good::good::good::good:
Click to expand...
Click to collapse
Not installing sir
Any other solution :good:
bhaskarnemichand said:
Not installing sir
Any other solution :good:
Click to expand...
Click to collapse
Then why can't you try all ota's of emui 4.1 which are less than 500 mb of all countries then one of them may work for you :good::good::good::good:
Marella ram_youtubr said:
Then why can't you try all ota's of emui 4.1 which are less than 500 mb of all countries then one of them may work for you :good::good::good::good:
Click to expand...
Click to collapse
After flashing a rollback package, MUST flash a full ROM.
Panchoso4D said:
After flashing a rollback package, MUST flash a full ROM.
Click to expand...
Click to collapse
To flash a rull rom, one must be able to flash a rollback package
Sent from my Honor 6X using XDA Labs
Panchoso4D said:
After flashing a rollback package, MUST flash a full ROM.
Click to expand...
Click to collapse
Yes ofcource
Background: I got my Honor 8 today, model # FRD-L04 (important later), updated to EMUI 5.1 and Nougat via Updater on phone, and decided I wasn't satisfied with EMUI. So I rooted and that went smoothly, but when I tried to flash a custom ROM, I bricked pretty hard. Long story short, tried flashing multiple ROMs until I found one that worked. The ROM I'm on right now has EMUI 5.1 and build number FRD-C900B131, which is completely different from my original build (FRD-L04). Looked it up and turns out it's a variant of the H8. Unfortunately, I tried to update via Updater and there were no updates available, so I'm stuck with EMUI 4.1 and MM for now (not complaining, since at least it works again). I also tried flashing the rollback ROM for the L04, but I got an incompatibility error when I tried dload method. So now, question is how do I get back to my original stock FRD-L04 ROM, or how do I update to Nougat on this model version (C900B131)?
Thanks for the quick reply. Could you guide me through how I would approach this? I'm not sure which TWRP to use for my (incorrect) build. Do you think using the TWRP for my correct build (L04) should be okay? I'm on EMUI 4.1 also, I think the EMUI version matters too when choosing which TWRP to flash.
Rommco05 said:
That's true, I think u need twro for M. Make quick search for Modaco twrp 3.0.1
Click to expand...
Click to collapse
I did, all of them are 3.0.2, none are 3.0.1. Should I try 3.0.1 from TWRP website?
Rommco05 said:
That's true, I think u need twro for M. Make quick search for Modaco twrp 3.0.1
Click to expand...
Click to collapse
Would this be okay?
Rommco05 said:
This one should be ok for Marshmallow http://www.modaco.com/forums/topic/377647-twrp-recovery-3020-for-honor-8/
Click to expand...
Click to collapse
Awesome, thank you. I've installed it and it seems to be working fine with no issues. So I found the rollback package for my model (L04), so I should just install this through TWRP? And then install the Honor 8 upgrade firmware? Does that sound right?
Rommco05 said:
Try just flash full firmware, no install rollback. Put zip to sdcard install over twrp and hope for the best, here can happen some unspecific problems. Firmware is right
Click to expand...
Click to collapse
I get "Could not find 'META-INF/com/google/android/update-binary' in the zip file". Is there somewhere I can download where it has META-INF?
Rommco05 said:
Try just flash full firmware, no install rollback. Put zip to sdcard install over twrp and hope for the best, here can happen some unspecific problems. Firmware is right
Click to expand...
Click to collapse
I managed to find a ROM for MM with my correct build, it's currently updating to Nougat right now, thanks a lot for your help!
davidwanglol said:
I managed to find a ROM for MM with my correct build, it's currently updating to Nougat right now, thanks a lot for your help!
Click to expand...
Click to collapse
Dude, i have the same problem, i´m stucked on android 6.0, my build number is C900B131 and it´s FRD-L04. Did you find an update for that exact same number? If so, could you please send it to me?
How about FRD-L09C900B131?
Below is the firmware link for HUAWEI P20 Pro Dual SIM Card
Model: CLT-L29C
Android OS: 8.1 Oreo
Build: CLT-L29636B131 (8.1.0.131)
EMUI 8.1
https://drive.google.com/open?id=1F9qOiDx9zyVaKtXN2yqbNUj4K0s7bEF6
What about CLT29 Single sim?
after download.. what process to update p20 pro without any root or unlock bootloader??
chikrron said:
What about CLT29 Single sim?
Click to expand...
Click to collapse
Single SIM? Lol I'm confused. Wouldn't it be called the L-09 if it was the single SIM??
I was under the impression L-09 was single and L-29 was dual
---------- Post added at 03:27 AM ---------- Previous post was at 03:27 AM ----------
matasapii said:
after download.. what process to update p20 pro without any root or unlock bootloader??
Click to expand...
Click to collapse
Afaik you can't.
---------- Post added at 03:29 AM ---------- Previous post was at 03:27 AM ----------
3 part files, this is best done with the HUR Updater method..
Think it's the only method
8.1.0.131 was removed from the Server
dladz said:
Single SIM? Lol I'm confused. Wouldn't it be carried the L-09 if it was the single SIM??
I was under the impression L-09 was single and L-29 was dual
---------- Post added at 03:27 AM ---------- Previous post was at 03:27 AM ----------
Afaik you can't.
---------- Post added at 03:29 AM ---------- Previous post was at 03:27 AM ----------
3 part files, this is best done with the HUR Updater method..
Think it's the only method
Click to expand...
Click to collapse
Sorry L-09
It's working??
Hey guys, I found the stock 131 firmware hidden in plain sight, for both L29C432 and L09C432, look at step 4 to install his ROM.
https://forum.xda-developers.com/huawei-p20-pro/development/31-05-romaur-v1-0-fast-stable-t3797986
sarichter said:
Below is the firmware link for HUAWEI P20 Pro Dual SIM Card
Model: CLT-L29C
Android OS: 8.1 Oreo
Build: CLT-L29636B131 (8.1.0.131)
EMUI 8.1
https://drive.google.com/open?id=1F9qOiDx9zyVaKtXN2yqbNUj4K0s7bEF6
Click to expand...
Click to collapse
Can i flash this rom with twrp recovery ?
rowihel2012 said:
Can i flash this rom with twrp recovery ?
Click to expand...
Click to collapse
Yes, with HuRupdater process.
oriveradel said:
Hey guys, I found the stock 131 firmware hidden in plain sight, for both L29C432 and L09C432, look at step 4 to install his ROM.
https://forum.xda-developers.com/huawei-p20-pro/development/31-05-romaur-v1-0-fast-stable-t3797986
Click to expand...
Click to collapse
Eh? Not sure if you realise that's a custom rom based on b131, it's certainly not "stock"
On step 4, he is providing a link to download full stock version to update phone before installing his custom ROM, I downloaded the stock file, unzipped it and you get the three files to update with HuRupdater, running full stock 131 on my phone from that link. ??
oriveradel said:
On step 4, he is providing a link to download full stock version to update phone before installing his custom ROM, I downloaded the stock file, unzipped it and you get the three files to update with HuRupdater, running full stock 131 on my phone from that link.
Click to expand...
Click to collapse
Not anymore it would seem....
I will zip it, and upload for you. To be clear CLT-L29C432 B131
oriveradel said:
I will zip it, and upload for you. To be clear CLT-L29C432 B131
Click to expand...
Click to collapse
I've got it already, but would be useful for others. Thanks
any one can help me.. i'm already unlock bootloader, and change recovery to TWRP..
my problem is after i copy 3 file update n hurupdate.. go to twrp recovery, i can't find folder that already i put the update file..
take twrp from : https://forum.xda-developers.com/hu...recovery-twrp-3-2-1-0-touch-recovery-t3779336
and https://tech-mizan.blogspot.com/2018/05/how-to-install-twrp-recovery-root.html (need password and i don't know what is the password)
twrp show diffrent folder not like normal view in p20 pro work normal..
thanks alots before..
matasapii said:
any one can help me.. i'm already unlock bootloader, and change recovery to TWRP..
my problem is after i copy 3 file update n hurupdate.. go to twrp recovery, i can't find folder that already i put the update file..
take twrp from : https://forum.xda-developers.com/hu...recovery-twrp-3-2-1-0-touch-recovery-t3779336
and https://tech-mizan.blogspot.com/2018/05/how-to-install-twrp-recovery-root.html (need password and i don't know what is the password)
twrp show diffrent folder not like normal view in p20 pro work normal..
thanks alots before..
Click to expand...
Click to collapse
You need to flash the unofficial TWRP https://forum.xda-developers.com/huawei-p20-pro/development/recovery-twrp-3-2-1-0-t3779400
This version allows you to decrypt storage. From what I can see you have flashed official version that does not allow this.
Once you have flashed correct TWRP you then need to remove all security measures (password, fingerprint, face unlock) before booting into recovery. You should then see the folders appear normally.
Deano1889 said:
You need to flash the unofficial TWRP https://forum.xda-developers.com/huawei-p20-pro/development/recovery-twrp-3-2-1-0-t3779400
This version allows you to decrypt storage. From what I can see you have flashed official version that does not allow this.
Once you have flashed correct TWRP you then need to remove all security measures (password, fingerprint, face unlock) before booting into recovery. You should then see the folders appear normally.
Click to expand...
Click to collapse
Thanks atons.. finaly i can get update.. hahaha..
lost step that i miss is remove security..
once again thanks alots bro @Deano1889
matasapii said:
Thanks atons.. finaly i can get update.. hahaha..
lost step that i miss is remove security..
once again thanks alots bro @Deano1889
Click to expand...
Click to collapse
No problem. I initially had same trouble as you so glad it worked for you.
chikrron said:
What about CLT29 Single sim?
Click to expand...
Click to collapse
This is only for the dual SIM variant of the P20 Pro. If needed I can get the single SIM update and post it. Feel free to message me with a request.
can any way to root or install magisk honor 8 without boot-loader unlock???
because Huawei turn off service to unlock boot-loader. and i can't get with dc unlocker for free.
Help Please.
No, bootloader unlock is a must!
How to install magisk at all
Hi,
How do I have to install magisk at all?
Is there any guide for the Honor 8 with Oreo?
regards
SirDarknight said:
No, bootloader unlock is a must!
Click to expand...
Click to collapse
I want little modification on stock ROM. I want to extract the update.app with HuaweiUpdateExtractor. Can i repack the update.app back to flash-able condition for stock recovery (without any error)???
atifnoor1122 said:
I want little modification on stock ROM. I want to extract the update.app with HuaweiUpdateExtractor. Can i repack the update.app back to flash-able condition for stock recovery (without any error)???
Click to expand...
Click to collapse
No. Any modification to it will cause it to fail.
---------- Post added at 01:35 PM ---------- Previous post was at 01:35 PM ----------
Domi-kun said:
Hi,
How do I have to install magisk at all?
Is there any guide for the Honor 8 with Oreo?
regards
Click to expand...
Click to collapse
Yup. First rule of xda is to use the search function.
Yup. First rule of xda is to use the search function.
Click to expand...
Click to collapse
I did not put my question exactly enough. I do know how to install magisk with TWRP.
But I installed RRos. And since custom recoverys are not supported for the installation (and I suspect neither for updates), I hope that there is another way to install Magisk.
If this oiption is discribed somewhere, then I probably really am too stupid to use the search function
Domi-kun said:
I did not put my question exactly enough. I do know how to install magisk with TWRP.
But I installed RRos. And since custom recoverys are not supported for the installation (and I suspect neither for updates), I hope that there is another way to install Magisk.
If this oiption is discribed somewhere, then I probably really am too stupid to use the search function
Click to expand...
Click to collapse
Again. A guide is here on xda. Seriously, you can easily Google it. I'm not going to spoon feed you.
atifnoor1122 said:
I want little modification on stock ROM. I want to extract the update.app with HuaweiUpdateExtractor. Can i repack the update.app back to flash-able condition for stock recovery (without any error)???
Click to expand...
Click to collapse
Unfortunately every package have it's signature. If you change something on the package the signature will fail