Hello!
I tried flashing another ROM to my S8+. The ROM was downloaded from SAMMOBILE and I followed the instructions step by step. While flashing with Odin ( Odin was downloaded from the link they provide on their site ), 5 seconds after I pressed START the phone just powered off after I pressed the bixby button by mistake. Now, the phone won't even power on and the led isn't turning on when I charge the phone! What can I do? Worked so hard for this phone!!
maicanvlad7 said:
Hello!
I tried flashing another ROM to my S8+. The ROM was downloaded from SAMMOBILE and I followed the instructions step by step. While flashing with Odin ( Odin was downloaded from the link they provide on their site ), 5 seconds after I pressed START the phone just powered off after I pressed the bixby button by mistake. Now, the phone won't even power on and the led isn't turning on when I charge the phone! What can I do? Worked so hard for this phone!!
Click to expand...
Click to collapse
Hi mate
did you flash the right firmware?
try pressing power button+ volumen down for several seconds (soft reset)
Try pressing - releasing the 3 button combo( to download mode) several quick times
MAX 404 said:
Hi mate
did you flash the right firmware?
try pressing power button+ volumen down for several seconds (soft reset)
Try pressing - releasing the 3 button combo( to download mode) several quick times
Click to expand...
Click to collapse
I am from Romania and I installed this one sammobile.com/firmwares/galaxy-s8-plus/SM-G955F/ROM/download/G955FXXU1CRC7/213035/
I tried both of the above and nothing happens. Also, I get no led or charging animation when I plug my phone in. Is it RIP?
MAX 404 said:
Hi mate
did you flash the right firmware?
try pressing power button+ volumen down for several seconds (soft reset)
Try pressing - releasing the 3 button combo( to download mode) several quick times
Click to expand...
Click to collapse
Hello man!
I checked 3 times and it is the right firmware.
I did bot of the above and nothing happens... No vibration....nothing. Also when I plug it in I get no LED or charging animation. Completely dead....( Is it RIP?
maicanvlad7 said:
Hello man!
I checked 3 times and it is the right firmware.
I did bot of the above and nothing happens... No vibration....nothing. Also when I plug it in I get no LED or charging animation. Completely dead....( Is it RIP?
Click to expand...
Click to collapse
Was it fully charged when it when off?, maybe let it discharge overnight
Try to charge it with a different cable/charger
Make sure that none of the buttons are stuck, press them one by one to make sure they work properly
Press power on , plug it into your pc and see if the device is recognized
do all of the above with the SIM and memory card out.....
What setting did you have in odin....
What it was flashing when you pressed the bixby button?
MAX 404 said:
Was it fully charged when it when off?, maybe let it discharge overnight
Try to charge it with a different cable/charger
Make sure that none of the buttons are stuck, press them one by one to make sure they work properly
Press power on , plug it into your pc and see if the device is recognized
do all of the above with the SIM and memory card out.....
What setting did you have in odin....
What it was flashing when you pressed the bixby button?
Click to expand...
Click to collapse
Hi again and thank you so much for all the help!
I had around 70% battery life so there was no chance it went from 70 to 0 in 5 mins.
It can not discharge because it's turned off and I can't make it power back on
I was flashing the AP file and 3 seconds after I hit start in odin the phone just powered off. All the buttons are working properly and there is no SIM/memory card in it.
If I press the power button nothing happens...same when I connect it to my PC....nothing
The phone is dead and so am I ))
maicanvlad7 said:
Hi again and thank you so much for all the help!
I had around 70% battery life so there was no chance it went from 70 to 0 in 5 mins.
It can not discharge because it's turned off and I can't make it power back on
I was flashing the AP file and 3 seconds after I hit start in odin the phone just powered off. All the buttons are working properly and there is no SIM/memory card in it.
If I press the power button nothing happens...same when I connect it to my PC....nothing
The phone is dead and so am I ))
Click to expand...
Click to collapse
Hi
Just the AP file what about the other 3 BL , CP and CSC? and what Odin setting you had?
My best guess is that the hardware is in an undetermined state ..not necessarily bricked but it may be
Keep pressing the buttons , try to get into download you may get lucky and catch the hardware "awake" and let you get into download mode...if so flash the firmware again...all 4 files
MAX 404 said:
Hi
Just the AP file what about the other 3 BL , CP and CSC? and what Odin setting you had?
My best guess is that the hardware is in an undetermined state ..not necessarily bricked but it may be
Keep pressing the buttons , try to get into download you may get lucky and catch the hardware "awake" and let you get into download mode...if so flash the firmware again...all 4 files
Click to expand...
Click to collapse
Just the AP file... noob mistake I guess? Pretty expensive one might be...
I will leave it charging over night I hope tomorrow it will work....by any chance.
Really appreciate the help dude!
maicanvlad7 said:
Just the AP file... noob mistake I guess? Pretty expensive one might be...
I will leave it charging over night I hope tomorrow it will work....by any chance.
Really appreciate the help dude!
Click to expand...
Click to collapse
If you are in the same base , Nougat to Nougat, flashing just one of them should not be too bad..but when changing base Nougat to Oreo...that is not a very good idea, is complete different firmware and they may not be 100% compatible
lets cross fingers and hope for the best
maicanvlad7 said:
Just the AP file... noob mistake I guess? Pretty expensive one might be...
I will leave it charging over night I hope tomorrow it will work....by any chance.
Really appreciate the help dude!
Click to expand...
Click to collapse
Hey, did you manage to start your device again normally?
I'm having the exact same issue and there doesn't seem to be any solution online.
Hello it's me (maicanvlad7) but from a guest account. It didn't start so I was forced to use the warranty. Depending on your location you might or might not be able to use the warranty. There is no software solution for this problem, none that I know of at least. Best of luck man!
maicanvlad77 said:
Hello it's me (maicanvlad7) but from a guest account. It didn't start so I was forced to use the warranty. Depending on your location you might or might not be able to use the warranty. There is no software solution for this problem, none that I know of at least. Best of luck man!
Click to expand...
Click to collapse
Oh, that's bad to hear. Thank you very much for your reply though, I'll contact Samsung and I'll see what I can do.
Greetings, have a nice day.
Related
After following the suggestions in my previous thread.
I am in a worse position than before. No Fastboot, No Recovery.
Is there any way to rescue this phone? (please read what I've already tried in the linked thread)
Shpetz said:
After following the suggestions in my previous thread.
I am in a worse position than before. No Fastboot, No Recovery.
Is there any way to rescue this phone? (please read what I've already tried in the linked thread)
Click to expand...
Click to collapse
The only solution I can give to your problem is that you flash the stock gingerbread(or froyo) firmware provided by LG via KDZ updater.
The instructions can be found on the link below(including download)-
http://www.lg-phones.org/how-to-install-android-2-3-3-gingerbread-firmware-on-lg-optimus-one.html
After successfully flashing it, if the phone doesn't turn on then turn the power off. Press and hold Power key + Home Key + Down volume key for more than 10 seconds.. When the power turns on, release these keys.
I am 100% sure that your phone will working again. If you have any problem or need my help PM me.
HIT THANKS IF I HELPED
:good::good::good::good::good:
abhinn124 said:
The only solution I can give to your problem is that you flash the stock gingerbread(or froyo) firmware provided by LG via KDZ updater.
The instructions can be found on the link below(including download)-
http://www.lg-phones.org/how-to-install-android-2-3-3-gingerbread-firmware-on-lg-optimus-one.html
After successfully flashing it, if the phone doesn't turn on then turn the power off. Press and hold Power key + Home Key + Down volume key for more than 10 seconds.. When the power turns on, release these keys.
I am 100% sure that your phone will working again. If you have any problem or need my help PM me.
HIT THANKS IF I HELPED
:good::good::good::good::good:
Click to expand...
Click to collapse
Wow! It worked.
Thank you so much.
EDIT: Slight problem.
It only lasts a few seconds before rebooting. The first time lasted a minute, then the time it stayed alive exponentially dropped off.
The phone is plugged in the whole time.
I am 90% sure the battery is flat.
This happened last time.
bump
I have given up on fixing this phone.
Ive posted it on ebay if anyone is interested.
http://www.ebay.com.au/itm/181144640346?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Shpetz said:
I have given up on fixing this phone.
Ive posted it on ebay if anyone is interested.
http://www.ebay.com.au/itm/181144640346?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Click to expand...
Click to collapse
Waht EXACTLY seems to be the problem now?
Hello, first, srry for my bad english, can anyone help me with the next problem:
The phone start and power off on 3 seconds and i can't install roms in cellphone, this problem start without any install mod , only the cellphone shutdown and when i start it don't works. I can enter in download mode for install a rom, but in 3 seconds the phone is power off and i can't install roms. The phone is a Samsung galaxy y pro (B5510L)
Video off the problem : youtube.com/watch?v=ISTdcHc1kAE
Please help , thank you
I suggest you take the phone to a repair shop and ask them to repair it.
Umar08
brau96 said:
Hello, first, srry for my bad english, can anyone help me with the next problem:
The phone start and power off on 3 seconds and i can't install roms in cellphone, this problem start without any install mod , only the cellphone shutdown and when i start it don't works. I can enter in download mode for install a rom, but in 3 seconds the phone is power off and i can't install roms. The phone is a Samsung galaxy y pro (B5510L)
Video off the problem : youtube.com/watch?v=ISTdcHc1kAE
Please help , thank you
Click to expand...
Click to collapse
Can you boot your phone in CWM recovery?
You should charge your phone first.. Make sure your phone's battery is fully charged.
charge the phone, enter download mode while connected to a pc, flash a stock kernel with odin then flash the rom. does the recovery mode work?
Hello, first thanks for the answer, im sure the battery is fully charged, becouse i get 2 batteris off my friends and i asked them if the baterry is charged and them tell yes, and i can't get recovery mode, if i press +vol and home button and power button the phone start with the samsung model screen and power off on 3 seconds, i dont know what to do. Thanks
brau96 said:
Hello, first thanks for the answer, im sure the battery is fully charged, becouse i get 2 batteris off my friends and i asked them if the baterry is charged and them tell yes, and i can't get recovery mode, if i press +vol and home button and power button the phone start with the samsung model screen and power off on 3 seconds, i dont know what to do. Thanks
Click to expand...
Click to collapse
download stock rom for your device, launch odin, enter download mode by pressing Volume down Key + OK button+power button
EPICoverclock said:
download stock rom for your device, launch odin, enter download mode by pressing Volume down Key + OK button+power button
Click to expand...
Click to collapse
Thanks for answer, the phone enter in download mode, but in 5 seconds get power off automatically and odin haven't time to recognize the phone and now i can't power on the phone, i need remove the battery and put it again. Thanks
nothing?
brau96 said:
nothing?
Click to expand...
Click to collapse
maybe your power button is stuck, or other button is stock
Get it repaired (talk to your phone company about this e.g. Sony), i think its the only way to fix your phone.:thumbup:
Umar08
i guess its only solution possible, i want repair it becouse i dont want spent money in software repairs, but i can't... 1 thing more, i see its a problem of boot, anyone have ideas for reapair boot options? thanks
- try charging the accu externaly
- while on booting try combos of vol +/- and power button to access recovery menu
- dissasemble and check the buttons
- maybe ADB debugging interface is available over USB -> try
givemeaname said:
- try charging the accu externaly
- while on booting try combos of vol +/- and power button to access recovery menu
- dissasemble and check the buttons
- maybe ADB debugging interface is available over USB -> try
Click to expand...
Click to collapse
Im sure the battery is charged becouse i charge it on friends phones
i can't enter in recovery menu, the phone have power off before.
i dissasemble the phone and i don't see anything unusual.
and i don't undestand what its ADB debugging interface.
Thanks
Can you get your phone into recovery mode?
Umar08
Umar08 said:
Can you get your phone into recovery mode?
Umar08
Click to expand...
Click to collapse
No,i can't get phone i recovery mode. I press vol + and home and power button, and power on with samsung model phone, and automatly power off.
Thankss
brau96 said:
, and automatly power off.
Click to expand...
Click to collapse
Sounds like you have battery problem, try cleaning contacts on battery as well as phone and use another battery to test (borrow one) .
for other solutions look in My Android Solutions
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
Sounds like you have battery problem, try cleaning contacts on battery as well as phone and use another battery to test (borrow one) .
for other solutions look in My Android Solutions
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
I have tested 2 batterys, the battery has been charge by my friend becouse i can't charge it, and im sure the battery its works good in other phone , and i clean the contacts but nothing :s thanks you
when my micro usb pins inside my samsung galaxy mini where in contact and they were short circuit my phone only turned on for like 1 second then turned off
Are the batteries compatible with your phone
Umar08
Hey guys, I used FlashTool and something went wrong. Ever since, My phone will only be a black screen when its turned on and I can't go into recovery mode. I can't work out how to restore it without. Please Please Help!?!?!?
Flas again with flashtool.
Before flashing press and hold power and volume up buttons together and hold about 10 seconds untill phone vibrate three times.Than star flashtool,hit flash and when you pop up windows show press and hold volume down button and connect phone to cable and flashing will succed.
Allek84 said:
Flas again with flashtool.
Before flashing press and hold power and volume up buttons together and hold about 10 seconds untill phone vibrate three times.Than star flashtool,hit flash and when you pop up windows show press and hold volume down button and connect phone to cable and flashing will succed.
Click to expand...
Click to collapse
Just did another one, Now the on button does nothing. My phone just won't turn on...
A couple of things that may help here
What model is your phone and what did you flash?
Please try and help us help you and let us know what you did
gregbradley said:
A couple of things that may help here
What model is your phone and what did you flash?
Please try and help us help you and let us know what you did
Click to expand...
Click to collapse
Its the D6603, I flashed a Marshmallow firmware, Then tried the stock firmware in order to fix it.
This morning all its doing is showing battery dead symbol despite being charged all night.
Jolbol1 said:
Hey guys, I used FlashTool and something went wrong. Ever since, My phone will only be a black screen when its turned on and I can't go into recovery mode. I can't work out how to restore it without. Please Please Help!?!?!?
Click to expand...
Click to collapse
Great New, I got it working again, Seems like battery life may have been a key issue here. Its loaded up, but got stuck on the blue musical bit and made some horrific beeping noise and keeps rebooting. Any help? I can't seem to get into recovery mode, Maybe thats just my method.
My honor 8 died on the lancet side lights up 1 red led and then 5 times the green led and then come back. The usb connection is dead so I can not work with any program to try to re-enable it ....
Anyone can give me an explanation of what these LEDs can be ???
Thanks to anyone can give me just an indication:confuso:
This situation was created after an upgrade I believe with firmware no good
Repeat push power button vibration and usb dead pc does not detect, anything starts then flash 1 red led and then 5 green repeat this cycle 3 times then turn off
Rommco05 said:
If turn phone to charge looks like start charging?
Click to expand...
Click to collapse
If I connect the phone to the charger does not turn on anything does not charge ...... after 3/4 hours I find it hot.
The usb is no longer responding to anything ......
Only the power button makes it vibrate one time and after a second the second vibration and starts doing that notification led sequence
Thanks for the interest you are very kind
I've been trying to load it all night but nothing has changed.
From the calculations I did during the last flash within the update.app, these images were deleted: sha256rsa, crc, curver, verilist, efi, fastboot to try a recovery.
After this happened ..........................
I was programming with dc-unlocker
Thanks again for your help.
traffic75 said:
Thanks for the interest you are very kind
I've been trying to load it all night but nothing has changed.
From the calculations I did during the last flash within the update.app, these images were deleted: sha256rsa, crc, curver, verilist, efi, fastboot to try a recovery.
After this happened ..........................
I was programming with dc-unlocker
Thanks again for your help.
Click to expand...
Click to collapse
let us know what steps you followed after your device is working
goodluck
venugopalu007 said:
let us know what steps you followed after your device is working
goodluck
Click to expand...
Click to collapse
Nothing has changed at this time
I'm trying different combinations with the tast but nothing to do ......
The biggest problem that the usb is not detected and can not attach it to the pc
I've already tried with usb 2.0 always dead
I've tried in power on all keystrokes and I've never heard sound recognition windows usb
On no , no fastboot we cannot do anything .just take it to care and they will fix it .
And dload option with the correct firmware in the sd card not work starting with 3 buttons method?
I'll make it pretty easier for you if it's your luck that shines your phone will revive
First do this
Plug in your us type c port of your charger on the phone while holding volume up button for like five seconds. Then leave it to charge for 5-10 minutes and the press power button simply . If it revives , good! If not, let's continue
Now if this didn't work and your have one very simple option of press the volume low key and power button while plugging in your usb type c , which is connected to a PC.
This will open your fastboot and rescue more - open hisuit on pc , hit recovery and it should do the magic
If this also doesn't work , try unlocking bootloader via the same process and flash a recovery and receive your phone.
If nothing of this works , welcome to the league of dead honor 8.
amansaini said:
I'll make it pretty easier for you if it's your luck that shines your phone will revive
First do this
Plug in your us type c port of your charger on the phone while holding volume up button for like five seconds. Then leave it to charge for 5-10 minutes and the press power button simply . If it revives , good! If not, let's continue
Now if this didn't work and your have one very simple option of press the volume low key and power button while plugging in your usb type c , which is connected to a PC.
This will open your fastboot and rescue more - open hisuit on pc , hit recovery and it should do the magic
If this also doesn't work , try unlocking bootloader via the same process and flash a recovery and receive your phone.
If nothing of this works , welcome to the league of dead honor 8.
Click to expand...
Click to collapse
I tried but all this does not work is always stuck with that led combination and usb is death
Thanks anyway for your interest
traffic75 said:
I tried but all this does not work is always stuck with that led combination and usb is death
Thanks anyway for your interest[/QUOT
I contacted dc-unlocker what I was using and advised me to try to short-circuit and pass a fimware test I should succeed. But he does not have short-circuit procedures for my honor8.
Have any of you ever heard of this technique?
Click to expand...
Click to collapse
traffic75 said:
traffic75 said:
I tried but all this does not work is always stuck with that led combination and usb is death
Thanks anyway for your interest[/QUOT
I contacted dc-unlocker what I was using and advised me to try to short-circuit and pass a fimware test I should succeed. But he does not have short-circuit procedures for my honor8.
Have any of you ever heard of this technique?
Click to expand...
Click to collapse
Short circuit ?? What is that bro?
Click to expand...
Click to collapse
I want to ask for help: I'm not sure but could start charging a firmware including bootloader iso when booting with the led.
The function is through the SD with the dload in the previous models used by au_temp.cfg and the firm update.app I believe au_temp.cfg can give instructions to switch to the firm's upload.
The problem I find nothing au_temp.cfg for my Honor 8.
Can someone help me??? Any of you have contacts with huawei to ask this info ????
Thanks to anyone who can really help me
help me !!! help me!!
Rommco05 said:
Which port u use, usb 3.0 or usb 2.0 if 3.0 switch to 2.0z anyway I think u need to go service
Click to expand...
Click to collapse
sorry sorry sorry
I was sure I replied sorry
I tried usb 3.0 at 2.0 but there is no connection.
I tried jun and power button for 5 minutes as suggested by digigoon but the situation does not change.
The phone does not turn on the screen vibrates only when the power button is pressed and leds are lit red and 5 times green for 2 repeats and then turn off.
I'm looking everywhere but nothing exists for my problem.
"The phone worked I dc-unlocked a firm without img sha256rsa, crc, curver, verlist, efi, fastboot, to try an update and that was the result ..........:crying::crying::crying::crying::crying::crying::crying::crying:
Hello friend
I'm sorry about your situation. I googled a bit to try to find a solution and what I found was this:
https://www.google.dk/url?sa=t&sour...ggzMAU&usg=AFQjCNHnbiPHjoFd2-SXkWsS_zzHVxM1-w
It seems like three persons in this thread had the same problem and two of them had tried returning the phone to a service center and got it repaired for free.
Maybe it is a fried motherboard and if that is the case they will never know that you tried flashing anything on the ROM.
All the best!
Ihaveatattoo said:
Hello friend
I'm sorry about your situation. I googled a bit to try to find a solution and what I found was this:
https://www.google.dk/url?sa=t&sour...ggzMAU&usg=AFQjCNHnbiPHjoFd2-SXkWsS_zzHVxM1-w
It seems like three persons in this thread had the same problem and two of them had tried returning the phone to a service center and got it repaired for free.
Maybe it is a fried motherboard and if that is the case they will never know that you tried flashing anything on the ROM.
All the best!
Click to expand...
Click to collapse
I've also seen them in my own situation ...... huawei's only solution solution.
Under these conditions it does not respond to any command ......
Rommco05 said:
I really don't know what next, don't have answer to your question
Click to expand...
Click to collapse
Rommcon05 If you may think of some other try I'm here
Rommco05 said:
Leave phone somehow discharged in some situation this can help
Click to expand...
Click to collapse
You intend to let it discharged completely for 4.5 days ????
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now.
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. I really messed up big time :'(
Thank you all in advance.
Well let the battery drain then boot up works or not?
LR7875 said:
Well let the battery drain then boot up works or not?
Click to expand...
Click to collapse
I haven't tried it yet, waiting also for the battery to be drain, it always boot loop but until samsung logo only..
JayR0503 said:
I haven't tried it yet, waiting also for the battery to be drain, it always boot loop but until samsung logo only..
Click to expand...
Click to collapse
Hi, can this be repaired by service center?
If warranty still here, they should repair for you, although most likely they will go ahead and replace the motherboard.
LR7875 said:
If warranty still here, they should repair for you, although most likely they will go ahead and replace the motherboard.
Click to expand...
Click to collapse
Oh my bad.. it is not under warranty anymore, this will cost me a lot right? Is there any chance of connecting back to download mode? I cannot access it anymore, it will show connect to PC only but Odin cannot setup connection though it is added successfully.
Thanks.
have you download the updated odin?
Try with latest Odin, patched Odin, or even running Heimdall(google 'Heimdall samsung') in an Linux virtualbox.
There is a procedure involving complete shut down, then holding certain buttons and somehow (with your fifth hand) connecting cable between device and PC. Probably with Odin already running on PC.
I'm sorry, I don't remember where I saw it described. I think I used it on my SM-T290, so start by checking the T290 and T295 threads.
ykkfive said:
have you download the updated odin?
Click to expand...
Click to collapse
Hi, thanks I haven't downloaded the latest version but I use the 3.14.4.. version. I will try to find the latest one. Thanks.
J.Michael said:
There is a procedure involving complete shut down, then holding certain buttons and somehow (with your fifth hand) connecting cable between device and PC. Probably with Odin already running on PC.
I'm sorry, I don't remember where I saw it described. I think I used it on my SM-T290, so start by checking the T290 and T295 threads.
Click to expand...
Click to collapse
HI, thanks for the reply, actually the tab has been added and recognized in odin, but while Odin will try to setup connection if always fail. and bootloader screen is not showing anymore only this new recovery screen which is totally different from the original and from those I have seen in the forum. attached image is the new recovery screen when I press Power + vol. up button.
JayR0503 said:
HI, thanks for the reply, actually the tab has been added and recognized in odin, but while Odin will try to setup connection if always fail. and bootloader screen is not showing anymore only this new recovery screen which is totally different from the original and from those I have seen in the forum. attached image is the new recovery screen when I press Power + vol. up button.
Click to expand...
Click to collapse
I don't know what the options on your new recovery screen are. (Do you know what "RDX" is?) I can't read the first stack of options.
The tricky procedure I am trying to remember had to do with triggering download mode, and getting Odin to connect. Try to find a more reliable description of the procedure, it will probably include an explanation of what problem it is trying to solve.
JayR0503 said:
HI, thanks for the reply, actually the tab has been added and recognized in odin, but while Odin will try to setup connection if always fail. and bootloader screen is not showing anymore only this new recovery screen which is totally different from the original and from those I have seen in the forum. attached image is the new recovery screen when I press Power + vol. up button.
Click to expand...
Click to collapse
Well not long before I saw someone enter this ss rdx mode. Maybe it is some sort of crashdump mode or something. Let the battery drain down and try to boot up again.
J.Michael said:
I don't know what the options on your new recovery screen are. (Do you know what "RDX" is?) I can't read the first stack of options.
The tricky procedure I am trying to remember had to do with triggering download mode, and getting Odin to connect. Try to find a more reliable description of the procedure, it will probably include an explanation of what problem it is trying to solve.
Click to expand...
Click to collapse
Hi i don't really have idea about RDX sorry but im searching about it also.. there are only 4 options for me to choice from the new menu, To PC connect or US, Connect to SD Card, RDX AGAIN and RDX Exit that's all.
LR7875 said:
Well not long before I saw someone enter this ss rdx mode. Maybe it is some sort of crashdump mode or something. Let the battery drain down and try to boot up again.
Click to expand...
Click to collapse
I'm trying to find some info on RDX also but I did tried to drain the battery but when it bootup same situation exit...
JayR0503 said:
Hi i don't really have idea about RDX sorry but im searching about it also.. there are only 4 options for me to choice from the new menu, To PC connect or US, Connect to SD Card, RDX AGAIN and RDX Exit that's all.
Click to expand...
Click to collapse
Have you tried:
tablet shut down, no cable
run Odin on PC
boot tablet
connect cable between tablet and PC
I'm hoping that option
Code:
[To PC] Connect a USB Cable
means "If you want to connect to a PC, now is the time to connect a USB cable."
Upload Mode means RDX Tool...
Upload Mode
There are several modes that Wave bootloader supports for certain purposes. The normal mode and low power mode just start the Nucleus kernel. I'm also pretty sure everybody knows what a DOWNLOAD MODE is (one with the red letters, but if initiated...
forum.xda-developers.com
Check this Thread...
Best Regards