Database Info

Note 10.1 N8000 Won't start

Hello,
I tried to update my note 10.1 gt-8000 today using the instructions from droid opinion website. I did not remove any partition or stuff. Just uploaded the rom Image in AP, selected auto reboot and F reset time and this i. but when the phone went to restart, it wont start again. Its been 30 minutes and phone is still off. I press the power button, volume + power up or down but nothing happens. Is my tablet hard bricked? Any idea whats wrong with it? Please help me
Edit: I just noticed when I also put it on the charge, the screen doesnt turn on to show charging. So it doesnt even charge, the odin console had 1 pass and 0 fail. Any idea what went wrong?

Go back to Droid opinion they are responsible .
Reread and double check instructions and correct firmware for your phone .
My guess is wrong firmware what was the original firmware .

JJEgan said:
Go back to Droid opinion they are responsible .
Reread and double check instructions and correct firmware for your phone .
My guess is wrong firmware what was the original firmware .
Click to expand...
Click to collapse
Thanks for your reply. So it means its hard bricked? When i plug in the charger it dont even show charging sign. Any way to fix it?

Does Odin work? If it works, try to re-flash your device according to the instructions. Otherwise, install the stock firmware.

CheeryLee said:
Does Odin work? If it works, try to re-flash your device according to the instructions. Otherwise, install the stock firmware.
Click to expand...
Click to collapse
Thanks for your reply. The odin dont work. Can you please tell me how to install the stock firmware?

Stock flash via Odin.
See threads.

Abdul.B said:
Thanks for your reply. The odin dont work. Can you please tell me how to install the stock firmware?
Click to expand...
Click to collapse
Sure, I can help you.
What OS do you have? Try to install Fastboot and ADB tools. After that, enter in download mode (not recovery!) and connect your device with computer.
ADB Devices will test the connection.
Next use Fastboot to flash.
If you have questions, pleask ask them. It will protect you from wrong actions.

CheeryLee said:
Sure, I can help you.
What OS do you have? Try to install Fastboot and ADB tools. After that, enter in download mode (not recovery!) and connect your device with computer.
ADB Devices will test the connection.
Next use Fastboot to flash.
If you have questions, pleask ask them. It will protect you from wrong actions.
Click to expand...
Click to collapse
The problem is i cannot enter download or recovery mode. I press the power plus volume down button and nothing happens. Even when i plug in the charger nothing is shown on the screen.

power on or no power?
Abdul.B said:
The problem is i cannot enter download or recovery mode. I press the power plus volume down button and nothing happens. Even when i plug in the charger nothing is shown on the screen.
Click to expand...
Click to collapse
I got mine working by opening the back cover (check instruction from Youtube)
unplug the power plug (the black small block in the middle with Red/Blue/Black colour cables), leave it for few minutes, plug it black.
This will only work if you have the "Samsung Note 10.1 logo" flashing in loop on screen all the time.
Good luck

PLEASE HELP! Very concerned have hard bricked phone!

Hi Guys,
So the story is that I was updating my Xperia Z3 (details below) from TWRP 2.8.6 to 'twrp-3.0.2-0-yuga' using the instructions androidnewsbox.com/2016/02/08/how-to-install-and-update-to-twrp-3-0-0 and after flashing the new TWRP the phone can no longer enter recovery mode and I get no other booting/loading screens.
I had 100% battery when I started the process.
It does still do the little vibrate thing when I hold down the power button but nothing happens after that.
When I plug it into the PC the LED flashes red, then green then goes off.
Reading the instructions twrp.me/devices/sonyxperiaz.html I did use the 'install' function not the 'recovery' function. Is that likely to be the mistake I made? If so is there any way to recover?
Any and all help will be greatly appreciated.
Model: D6653
Previous TWRP: 2.8.6
Android version: 5.0.2
Software version: 23.1.A.0.726

Use flashtool to reflash a new system image (ftf). You're using stock so probably your kernel doesn't support FOTA-Kernel partition flashing.

Great to hear back from someone.
Unfortunately I don't think that I can just flash a new ftf using flashtool as I cant get into fastboot mode.
I have been working through the following online tutorial
engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
I have installed the USB drivers on my PC from here
androidmtk.com/download-sony-xperia-usb-driver
And i can get the ftf file from here (mine is 1288-6090)
xpericheck.com/device/D6653
Unfortunately I am unable to put the phone into fastboot mode by holding down the power and down buttons. Nothing happens.
The tutorial above also tells me "If phone not going to Fastboot mode than connect it to PC by USB. Hold Volume Up and Power button until you get company logo or backlight."
This also does nothing and I get no backlight or company logo.
FYI if it helps about a year ago I rooted my phone using a tutorial very similar to this
oneandroid.gs/root-xperia-z3/
I will keep working on the problem and post any updates as they come up.

h3llcat said:
Great to hear back from someone.
Unfortunately I don't think that I can just flash a new ftf using flashtool as I cant get into fastboot mode.
I have been working through the following online tutorial
engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
I have installed the USB drivers on my PC from here
androidmtk.com/download-sony-xperia-usb-driver
And i can get the ftf file from here (mine is 1288-6090)
xpericheck.com/device/D6653
Unfortunately I am unable to put the phone into fastboot mode by holding down the power and down buttons. Nothing happens.
The tutorial above also tells me "If phone not going to Fastboot mode than connect it to PC by USB. Hold Volume Up and Power button until you get company logo or backlight."
This also does nothing and I get no backlight or company logo.
FYI if it helps about a year ago I rooted my phone using a tutorial very similar to this
oneandroid.gs/root-xperia-z3/
I will keep working on the problem and post any updates as they come up.
Click to expand...
Click to collapse
First hard shut down your phone by using combo, after that, download the ftf for your phone (1288-6090 is the customization, what you need is an ftf that its compatible with your phone model, download flash tools, install the drivers that come with it, and using xperifirm (Included in flashtools) you download the firmware) After you have all settled up, proceed to flash your phone, select firmware and then it'll ask you to connect your phone in flash mode not fastboot mode, you can do that by pressing vol up + power (press them and while pressing them connect the usb to the pc). Then the flashing process will start. You can find many tutorials around here in xda. Do not use external tutorials, go find stuff here. It's way more reliable as many are made just for your phone.

Hi and thanks again.
This gives me plenty to learn about and go forward with thanks heaps.
I will give this process a go later today but I have a few questions if you dont mind.
hard shut down your phone by using combo
Click to expand...
Click to collapse
I am not familiar with any combo and without visual ques from the screen or LED I cant tell if it is off. I have a button that says 'off' near the sim card is that sufficient?
connect your phone in flash mode not fastboot mode, you can do that by pressing vol up + power
Click to expand...
Click to collapse
Do I need to continue to hold down the buttons during the flashing process?
You can find many tutorials around here in xda
Click to expand...
Click to collapse
I do feel a little out of my depth here and am a bit confused about what to even search for to find a tutorial on what you are suggesting. If you can point me to an example tutorial that would be fantastic.

h3llcat said:
I am not familiar with any combo and without visual ques from the screen or LED I cant tell if it is off. I have a button that says 'off' near the sim card is that sufficient?
Click to expand...
Click to collapse
Yes that one, If you press it enough (about 5-10 secs) the phone will shutdown and It wont try to restart. This is what you need first.
h3llcat said:
Do I need to continue to hold down the buttons during the flashing process?
Click to expand...
Click to collapse
No, only when connecting the phone to start flashing the system software, you will see a green light in the notification led that will then shut off and flashing process will start.
h3llcat said:
I do feel a little out of my depth here and am a bit confused about what to even search for to find a tutorial on what you are suggesting. If you can point me to an example tutorial that would be fantastic.
Click to expand...
Click to collapse
This is a great almost-up-to-date guide http://www.xperiablog.net/2015/03/1...peria-lollipop-using-xperifirm-and-flashtool/
XperiFirm is included in flashtools now so you don't have to download it, but to get your firmware you have to do the same steps but opening xperifirm from inside flashtool.
You can download flashtool here http://www.flashtool.net/downloads.php

Seems to be a success!
Thanks heaps for all your great assistance.

Did you get the Z3 D6653 going again?
Hi H3llcat,
Jumping through some hoops with the D6653 myself... did you get it to boot up? Not sure how far you went with it, if still an issue charge it back up and let's try a couple of things; I realize it'll just be sitting there all dumb and dark like, but do it anyway. So let us know.
h3llcat said:
Hi Guys,
So the story is that I was updating my Xperia Z3 (details below) from TWRP 2.8.6 to 'twrp-3.0.2-0-yuga' using the instructions androidnewsbox.com/2016/02/08/how-to-install-and-update-to-twrp-3-0-0 and after flashing the new TWRP the phone can no longer enter recovery mode and I get no other booting/loading screens.
I had 100% battery when I started the process.
It does still do the little vibrate thing when I hold down the power button but nothing happens after that.
When I plug it into the PC the LED flashes red, then green then goes off.
Reading the instructions twrp.me/devices/sonyxperiaz.html I did use the 'install' function not the 'recovery' function. Is that likely to be the mistake I made? If so is there any way to recover?
Any and all help will be greatly appreciated.
Model: D6653
Previous TWRP: 2.8.6
Android version: 5.0.2
Software version: 23.1.A.0.726
Click to expand...
Click to collapse

Not sure if this is worth mentioning but this thread is 2 years old.
Yes I did get everything working, xkeita was a great help and the guide he sent me was useful.
Have you got issues yourself?

Bricked my S10e one day after getting it, i need some help

So, today my dad bought me a new phone because i needed one, an S10e. And i, like a massive idiot, decided to flash it with TWRP to try and root it. It worked, sort of, TWRP recovery worked fine, but the phone was in a boot loop when it wasnt in recovery. So i decided to flash the stock firmware, only that it got stuck on the System part when i flashed it with Odin, so i had the brilliant idea to disconnect and try again, except i ended up bricking the entire download mode. I cant turn off my phone, nor can i go into recovery mode, everytime i try to turn off the phone, it boots up back into the download mode with the Smart Switch error, no warnings, no cancels, nothing. Just the error screen. Now if i try to flash it again with Odin on the error screen, it gets stuck on Boot.
Am i royally ****ed to the point where i cant send it to the store? I got it today so i thought i could take it back to where i bought the phone for a replacement or repair, but if not then i honestly dont know what to do. I tried using Kies or Smart Switch for restoration, but they dont even recognise it.

Ooohh...So sorry. Im going to look around for some help for you.
I used to do this but havent the need in years with the new technologies.

Better to ask over at the Magisk root thread in the regular S10 forum.

You can call Samsung and if its under warranty they can walk you through or do it while connected to your computer.
---------- Post added at 10:44 PM ---------- Previous post was at 10:17 PM ----------
I found this...
https://www.androidexplained.com/galaxy-s10-unbrick/
and this
https://youtu.be/kIOiDSphmRI
I hope this helps.

you should be able to get into download even after that error
just take out the usb cable and hold power + bixby+ vol down to force reboot then just hold bixy and vol down and plug the cable then you are back into download mode and restore your phone. It's not messed up
Search on youtube s9 download mode.

:good: Help it rise Undertaker21.

Try to boot in fastboot and reflash all partition.

TheUndertaker21 said:
you should be able to get into download even after that error
just take out the usb cable and hold power + bixby+ vol down to force reboot then just hold bixy and vol down and plug the cable then you are back into download mode and restore your phone. It's not messed up
Search on youtube s9 download mode.
Click to expand...
Click to collapse
Thats the thing, if i hold vol down and power for the 7 secs to get out of download mode, it automatically boots itself back into download mode without any "press vol up to continue" and stuff, its just the constant "an error has occured while updating system software" screen and absolutly nothing else, and like i said, i tried to reflash all the firmware back to stock, but odin just stops at Boot, and a message appears on the error screen saying a PIT check failed (thinking about it, i could just be that i downloaded the wrong firmware, i dont actually know what country the phone was made in, and if it helps, i bought it in Lithuania, and i unlocked it with a Lithuanian SIM card, so im not sure what country firmware i should get. One strange thing: i remember looking at the display case at the salon i bought the phone at, and it said that the phone has the Snapdragon CPU chipset, but if that was true then i wouldnt be able to have unlocked my bootloader for Odin in the first place)

Could you check the back glass for the model number?
It should start with SM-

rishab_s said:
Could you check the back glass for the model number?
It should start with SM-
Click to expand...
Click to collapse
The model is SM-G970F/DS. I remember this from when i looked for the firmware i need to reflash it

Install smart switch on your PC and do the emergency software recovery.

Intratech said:
Install smart switch on your PC and do the emergency software recovery.
Click to expand...
Click to collapse
I already said, smart switch doesnt recognize the phone, nor do i even have a code for the emergency recovery

TehHoovy said:
I already said, smart switch doesnt recognize the phone, nor do i even have a code for the emergency recovery
Click to expand...
Click to collapse
Could you take a picture of the phone in download mode?
This may help me or someone else figure out if your phone is recoverable through Odin.
Sent from my Sony Xperia XA2 using XDA Labs

sieghartRM said:
Could you take a picture of the phone in download mode?
This may help me or someone else figure out if your phone is recoverable through Odin.
Sent from my Sony Xperia XA2 using XDA Labs
Click to expand...
Click to collapse
i would if i could, dont have the phone with me atm, left it with my dad, but i guess just imagine a boot loop but instead of the regular splash screen, its the download mode emergency error and not a single button combination works

TehHoovy said:
i would if i could, dont have the phone with me atm, left it with my dad, but i guess just imagine a boot loop but instead of the regular splash screen, its the download mode emergency error and not a single button combination works
Click to expand...
Click to collapse
Use smart switch, please follow the instructions in this video
You need IMEI and Serial number which can be found on the box of your phone or it will be embedded in the back glass
I believe on the newer version of smart switch you have to enable device Initialization from the preferences tab

TehHoovy said:
i would if i could, dont have the phone with me atm, left it with my dad, but i guess just imagine a boot loop but instead of the regular splash screen, its the download mode emergency error and not a single button combination works
Click to expand...
Click to collapse
Have you tried holding down bixby botton + Volume down then plugging in the USB cable?

Intratech said:
Have you tried holding down bixby button + Volume down then plugging in the USB cable?
Click to expand...
Click to collapse
yes, i have, and again, nothing happens, it just instantly goes straight to the error you get when you **** up an odin flash in the middle of its work

This is so odd. Ideally a picture of the error screen would really help here. It's usually pretty darn difficult to brick a Samsung phone.
Have you tried using a different USB cable and PC to do the Odin flash?

Intratech said:
This is so odd. Ideally a picture of the error screen would really help here. It's usually pretty darn difficult to brick a Samsung phone.
Have you tried using a different USB cable and PC to do the Odin flash?
Click to expand...
Click to collapse
Sadly i do not have my phone with me at the moment, however this is the exact error screen i get, and its the only screen i get, because it the only thing that actually lights up the screen
https://img.xda-cdn.com/MiQBugyvcr1...yazo.com/cae0a29bba68b440297ab7cc93413ff3.png
And no, i have not tried that as i do not have a second pc

TehHoovy said:
Sadly i do not have my phone with me at the moment, however this is the exact error screen i get, and its the only screen i get, because it the only thing that actually lights up the screen
https://img.xda-cdn.com/MiQBugyvcr1...yazo.com/cae0a29bba68b440297ab7cc93413ff3.png
And no, i have not tried that as i do not have a second pc
Click to expand...
Click to collapse
Do you know the model number e.g. my is SM-G970F UK?
Sent from my Sony Xperia XA2 using XDA Labs

Please Help me

Hey guys,
I just bought the Samsung J4+ (SM-J415F) and now have a dead phone after flashing a firmware. It doesnt turn on. I cannot put it into recovery mode. The screen is always black. This is the order of events:
1. I succesfully flashed twrp + supersu (i followed the steps from this page: https://forum.xda-developers.com/gal...j415f-t3876876)
2. After doing that i had a bootloop.
3. I decided to flash the following rom to get rid of the bootloop: [up_vnROM.net]_J415FXXU1ARIK_J415FOJM1ARIK_EGY_8.1_FULL (https://www.firm-ware.com/2018/10/sa...-download.html)
4. This also worked successfully and i saw the android symbol for a few seconds. However, then the power went off. Now the phone is dead.
It seems like i can turn it on to download mode (screen still black tho) and connect it to odin (odin is recognizing the phone) but if i try to flash again it stucks on "setup connection". I am using odin 3.13.1. Yes I already tried to run odin as administrator but it didnt change anything.
Any ideas how to bring my phone back to life? Any help would be appreciated.

muzammilghani1994 said:
Hey guys,
I just bought the Samsung J4+ (SM-J415F) and now have a dead phone after flashing a firmware. It doesnt turn on. I cannot put it into recovery mode. The screen is always black. This is the order of events:
1. I succesfully flashed twrp + supersu (i followed the steps from this page: https://forum.xda-developers.com/gal...j415f-t3876876)
2. After doing that i had a bootloop.
3. I decided to flash the following rom to get rid of the bootloop: [up_vnROM.net]_J415FXXU1ARIK_J415FOJM1ARIK_EGY_8.1_FULL (https://www.firm-ware.com/2018/10/sa...-download.html)
4. This also worked successfully and i saw the android symbol for a few seconds. However, then the power went off. Now the phone is dead.
It seems like i can turn it on to download mode (screen still black tho) and connect it to odin (odin is recognizing the phone) but if i try to flash again it stucks on "setup connection". I am using odin 3.13.1. Yes I already tried to run odin as administrator but it didnt change anything.
Any ideas how to bring my phone back to life? Any help would be appreciated.
Click to expand...
Click to collapse
How are you getting to download mode?
It seems you are not actually in download mode, but the phone is in a semi booted state.

ashyx said:
How are you getting to download mode?
It seems you are not actually in download mode, but the phone is in a semi booted state.
Click to expand...
Click to collapse
when turn on the phone with vol down + power button then i just seeing the android symbol for a few seconds. However, then the power went off. no download mode, no recovery.

u there?
Sent from my HTV32 using Tapatalk

muzammilghani1994 said:
when turn on the phone with vol down + power button then i just seeing the android symbol for a few seconds. However, then the power went off. no download mode, no recovery.
Click to expand...
Click to collapse
That will just reboot the device.
Plug the USB cable in then hold POWER + VOL UP + VOL DOWN.

ashyx said:
That will just reboot the device.
Plug the USB cable in then hold POWER + VOL UP + VOL DOWN.
Click to expand...
Click to collapse
doesn't work. when i do this its only restart the phone.
Sent from my HTV32 using Tapatalk

muzammilghani1994 said:
doesn't work. when i do this its only restart the phone.
Click to expand...
Click to collapse
Did you ensure the cable was attached to both device and pc?
If so I suggest you try another cable.

ashyx said:
Did you ensure the cable was attached to both device and pc?
If so I suggest you try another cable.
Click to expand...
Click to collapse
nope it's not working.
Sent from my HTV32 using Tapatalk

ashyx said:
Did you ensure the cable was attached to both device and pc?
If so I suggest you try another cable.
Click to expand...
Click to collapse
https://youtu.be/ZCKJud_qp5A
check it out i upload video of my issue.
Sent from my HTV32 using Tapatalk

muzammilghani1994 said:
check it out i upload video of my issue.
Click to expand...
Click to collapse
This will happen if your cable is not connected to both PC and device.
The device needs to detect it is connected to a PC.
I suggest changing the cable.
Secondly you can try booting to Recovery mode. (with cable out)
As soon as you see that flash hold POWER + VOL UP only until you see recovery mode.

ashyx said:
This will happen if your cable is not connected to both PC and device.
The device needs to detect it is connected to a PC.
I suggest changing the cable.
Secondly you can try booting to Recovery mode. (with cable out)
As soon as you see that flash hold POWER + VOL UP only until you see recovery mode.
Click to expand...
Click to collapse
try next. open odin do set things as ever,(ap,bl,cp,csc) then BEFORE you connect your phone,press vol+,vol-,power button in same time,then connect usb cabel.remember this three buttons must be press in same time when connected with usb.
---------- Post added at 11:57 AM ---------- Previous post was at 11:51 AM ----------
muzammilghani1994 said:
Hey guys,
I just bought the Samsung J4+ (SM-J415F) and now have a dead phone after flashing a firmware. It doesnt turn on. I cannot put it into recovery mode. The screen is always black. This is the order of events:
1. I succesfully flashed twrp + supersu (i followed the steps from this page: https://forum.xda-developers.com/gal...j415f-t3876876)
2. After doing that i had a bootloop.
3. I decided to flash the following rom to get rid of the bootloop: [up_vnROM.net]_J415FXXU1ARIK_J415FOJM1ARIK_EGY_8.1_FULL (https://www.firm-ware.com/2018/10/sa...-download.html)
4. This also worked successfully and i saw the android symbol for a few seconds. However, then the power went off. Now the phone is dead.
It seems like i can turn it on to download mode (screen still black tho) and connect it to odin (odin is recognizing the phone) but if i try to flash again it stucks on "setup connection". I am using odin 3.13.1. Yes I already tried to run odin as administrator but it didnt change anything.
Any ideas how to bring my phone back to life? Any help would be appreciated.
Click to expand...
Click to collapse
when you in download mode and have message "setup connection" dsconnect cable and connect again and try flash.if is not your country firmware then check only ap,bl,cp and csc and try flash.

Dead boot

Hello, please help. I have a big problem.
I just flashed custom ROM and the installation was successful. When I restarted the phone, it stopped at the "Samsung Galaxy" logo and did not complete and then restarted automatically in this case. I tried to enter twrp, but to no avail. I also tried Entering the download mode, but also it does not work
I hope that someone will help me, and is this how the phone was damaged, or is there hope to recover it?

Try holding power and volume down for over 20 seconds, after the phone reboot keep holding those keys and hope you get into download mode

Zakaria2328 said:
Try holding power and volume down for over 20 seconds, after the phone reboot keep holding those keys and hope you get into download mode
Click to expand...
Click to collapse
Thx bro, but it didn't work

mhmdhousni said:
Thx bro, but it didn't work
Click to expand...
Click to collapse
Does Odin recognise the phone?

mhmdhousni said:
Hello, please help. I have a big problem.
I just flashed custom ROM and the installation was successful. When I restarted the phone, it stopped at the "Samsung Galaxy" logo and did not complete and then restarted automatically in this case. I tried to enter twrp, but to no avail. I also tried Entering the download mode, but also it does not work
I hope that someone will help me, and is this how the phone was damaged, or is there hope to recover it?
Click to expand...
Click to collapse
completely switch off the phone. hold volume up and volume down together and connect usb cable.

Zakaria2328 said:
Does Odin recognise the phone?
Click to expand...
Click to collapse
Unfortunately not, I even tried to enter it into download mode by pressing the volume up and down buttons and then connecting the USB, and it did not work, so I think it may need a board

mvikrant97 said:
completely switch off the phone. hold volume up and volume down together and connect usb cable.
Click to expand...
Click to collapse
I tried this and it didn't work either

mhmdhousni said:
I tried this and it didn't work either
Click to expand...
Click to collapse
Can you disassemble the phone and remove the battery and reconnect it again and try to put it into download mode?

mvikrant97 said:
Can you disassemble the phone and remove the battery and reconnect it again and try to put it into download mode?
Click to expand...
Click to collapse
Honestly, no, I haven't tried jaw before But I waited until the battery ran out and tried again to insert the download, but it didn't work either,,, I have a question I first formatted and then installed the ROM, then it succeeded, but after the word “installation was successful” there were words in red “failed mount system root” Then I flashed the rest of the ROM files, then I thought it was over, so I restarted, but it stopped at the "samsung galay - secured by Knox" logo. It does not continue and then restarts itself in this case and does not stop until the battery runs out and stops then I tried to enter the recovery but to no avail and also the same thing with the download mode,, summarizing all this does the phone need a motherboard, or that the matter can be solved?

mhmdhousni said:
Honestly, no, I haven't tried jaw before But I waited until the battery ran out and tried again to insert the download, but it didn't work either,,, I have a question I first formatted and then installed the ROM, then it succeeded, but after the word “installation was successful” there were words in red “failed mount system root” Then I flashed the rest of the ROM files, then I thought it was over, so I restarted, but it stopped at the "samsung galay - secured by Knox" logo. It does not continue and then restarts itself in this case and does not stop until the battery runs out and stops then I tried to enter the recovery but to no avail and also the same thing with the download mode,, summarizing all this does the phone need a motherboard, or that the matter can be solved?
Click to expand...
Click to collapse
It can be solved. It doesn't need a motherboard.
Try Chimera tool. It can fix dead boot. You may need to short test point of your phone so that the software recognises your phone.

mvikrant97 said:
It can be solved. It doesn't need a motherboard.
Try Chimera tool. It can fix dead boot. You may need to short test point of your phone so that the software recognises your phone.
Click to expand...
Click to collapse
I really appreciate your help, but can you tell me how to use it? I will do this later because I am busy during this period

mhmdhousni said:
I really appreciate your help, but can you tell me how to use it? I will do this later because I am busy during this period
Click to expand...
Click to collapse
Yeah sure. Its pretty straight forward. You can find tutorials on YouTube.

mvikrant97 said:
Yeah sure. Its pretty straight forward. You can find tutorials on YouTube.
Click to expand...
Click to collapse
Well, I'll look into it, thank u sir <3