New home for the UNOFFICIAL builds of LineageOS 14.1 for the Verizon Samsung Galaxy S3 (d2vzw) (SCH-I535)
Transitioning from the Q&A sub-forum "Level of interest in maintaining UNOFFICIAL LineageOS 14.1 for d2vzw ??"
This ROM is built only from source pulled from the official LineageOS repositories. Nothing is changed by me. You get exactly what Lineage would make available if the phone was still "Officially" maintained.
The only difference is my build is signed with my private key, vice the official Lineage key.
Since my build is signed with a different key, you MUST PERFORM A FACTORY RESET (which means WIPING DATA).
If you do not WIPE DATA, the flash will still complete, but when you try to run any apps, they will most likely crash.
You cannot backup your applications and restore them after flashing, so you will need to reinstall all your apps from scratch. This behavior is not an issue with the ROM, but an Android security feature to protect your phone data.
If you choose to install a Google Applications suite (aka GApps), you MUST flash the ROM & GApps AT THE SAME TIME. Said a different way....
You CANNOT flash the ROM first, let it boot, set it up... and THEN go back and flash GApps. This requirement applies to any Official LineageOS ROM.
Builds will come out mid-month to capture Lineage updated and android security patches.
While I have verified flashing the build on my own phone, and the process should work for everyone else.... I STRONGLY recommend everyone do a FULL BACKUP before flashing the very first time.
This ROM is ONLY for the VERIZON Samsung Galaxy S3, so DO NOT flash it to other S3 variants.
The most current build is available from:
https://www.dropbox.com/s/pvw5lhept9jn7w2/lineage-14.1-20190307-UNOFFICIAL-d2vzw-install.zip?dl=0
SHA1: f1818ccdfc0af02dece8c9e1733a087ef4370fbf
File: lineage-14.1-20190307-UNOFFICIAL-d2vzw-install.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
Unofficial LineageOS 14.1 for d2vzw, ROM for the Verizon Samsung Galaxy S III
Contributors
mjb32803
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Verizon Samsung Galaxy S3 (d2vzw) (SCH-I535)
Based On: LineageOS 14.1 (Android 7.1.2 Nougat)
Version Information
Status: Snapshot
Stable Release Date: 2019-03-07
Created 2018-04-14
Last Updated 2019-03-07
Reserved
The most applicable changelog for this build of LineageOS 14.1 can be found here:
https://www.lineageoslog.com/14.1/i9300
STOP! DO NOT PASS GO!
You MUST also have an UNLOCKED BOOTLOADER. If you are using SAFESTRAP because you CANNOT unlock your bootloader, then you are out of luck. This ROM will NOT work with SAFESTRAP.
Make sure you're TWRP version is up to date! Older versions of TWRP will have issues flashing this ROM.
https://dl.twrp.me/d2vzw/
Make sure you are using the latest Modem. It should be I535OYDNE1
If you don't have it installed, you can download a zip, that is flashable through TWRP here:
https://www.dropbox.com/s/i15enyq8wm759z9/d2vzw_MF1_firmware_NE1_modem.zip?dl=0
Hint: When using your SGS3 without a cellular plan (wifi only), make sure to put the phone in Airplane Mode to disable the cellular modem, but then turn on WiFi and Bluetooth. GPS does not seem to be affected by using Airplane Mode. The small airplane icon will remain in the status bar after turning WiFi and Bluetooth ON. Using this technique, with the phone in Balanced power mode, I can routinely get 6+ days of standby (phone powered on, but not actively used). There is also an Efficiency Mode, and Power Save Mode. I've experimented with Power Save mode, and went 10 days with mostly standby and some short term intermittent use; however the phone is slow to respond and a bit sluggish.
Battery Replacement info: For those interested, I am only on my second battery since I bought my d2vzw new. OEM battery latest almost 4 years. My second battery I bought off Amazon, from Anker. I continue to get very good life with the Anker battery. It also has the built in NFC antenna. At some point, I expect I will need to replace the Anker, but most batteries I see online, do NOT include the NFC antenna. If you've replaced your battery recently, and are happy with the quality/performance, it would be great to post the brand and seller for everyone's benefit
Excellent job @mjb32803!!!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
How many users do we have?
Dropbox doesn't provide any download metrics, so I have no idea how many people are using this ROM.
If you've downloaded and flashed, I'd appreciate if you'd either PM me, or make a post.
Posts would be preferred along with a note about how its is working for you.
mjb32803 said:
Dropbox doesn't provide any download metrics, so I have no idea how many people are using this ROM. If you've downloaded and flashed, I'd appreciate if you'd either PM me, or make a post.Posts would be preferred along with a note about how its is working for you.
Click to expand...
Click to collapse
I had just been using it for a short time in the last few days...
All i can provide is that it has been working very well with little to no issues to really report. I just have to use it a bit longer, myself, to provide anything substantial (since it's not my primary device).
Just an FYI/clarification for those who may not be aware of this minor thing...
Disable (aka set it to Manual) the LineageOS Firmware Updater within the Device itself. This just uses resources and Internet data. The Unofficial updates are provided by @mjb32803 and requires them to be manually downloaded and installed.
Thank you very much @mjb32803 for your time, effort and, importantly, your support for this development!!!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Haven't flashed yet but joining this thread for tracking! Have 2 perfectly functioning S3's at home and will be watching this conversation. Thanks a ton for the effort and time! :highfive:
I'm on your ROM, thanks!
Not my primary device but nice to know I have a current OS when I do fire it up.
A few delays this week. Upgraded to Ubuntu 18.04 Mate
I wasn't prepared for the impact of upgrading my system from 17.10 to 18.04, and things went a bit crazy when I tried to create a new build.
After spending a few days tinkering, I decided to follow my own instructions to recreate the build environment and setup the repository.
While frustrating, it was a good opportunity to verify what I had documents.
Needless to say, my instructions did not work as written, although I was pretty close and just a few tweaks were involved (thanks Google).
Short story is that I think I got everything working, and I am currently running a build.
Keep your fingers crossed (@23%) and moving along nicely.
Update:
Build done. Flashed to my phone and currently testing. So far seems good. This build was mainly to verify everything works after my 17.10 -> 18.04 Update. In any event, I will post through dropbox in a couple of days. FYI, The Android MAY security updates have not dropped yet, so they are not in this build.
Thank you *so* much for keeping this alive. I've been using my S3 for far too long, and it's just a mess of a hacked/rooted phone on the last official KitKat update. I'm moving later this year and will likely move the entire family over to T-Mobile (Sprint T-Mobile?) at the same time since I like the extended number of phones supported by their network vs Verizon (and I know my family will too, like the Honor 7X). Until then, freedom!
Tested, new build is available
See Post #1 for the download link.
I've been testing thing this one on my personal phone for a couple of days, and no issues so far. :good:
@mjb32803, I just wanted to let you know that your last build has been working really well.
Thank you very much for your continued development and keep up the good work!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
@mjb32803, I just wanted to let you know that your last build has been working really well.
Thank you very much for your continued development and keep up the good work!
Click to expand...
Click to collapse
Seconded!
Ibuprophen said:
@mjb32803, I just wanted to let you know that your last build has been working really well.
Thank you very much for your continued development and keep up the good work!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Appreciate the feedback. Battery life on my phone has been pretty amazing. Using the phone as a remote for Roku, and my WD TV Live streaming boxes, and occasional email checking, web browsing... I get 4 days between charges.
Am in the process of running a new build...
New Build Available 2018-05-17
Download information on post #1
The May security patches still haven't dropped, so they aren't in this build.
I've been running it since yesterday and is smooth for me.
New Build 2018-05-20
Download and Installation info in Post #1
Yes it's only been a few days since the last build, but this one includes the May 2018 Android security patches. I have flashed to my phone and tested Play Store, Root Explorer, Firefox, Maps, Camera, Contacts, K-9 Mail... all seems good. Normally I would run the phone for a more extended period, but thought I'd make the update available quicker since it does incorporate the security patches.
Enjoy.
Update. 1 day 3 hours since flash. Working well. Battery @ 71%
mjb32803, thanks for your hard work keeping this project going. I use it and I love it.
mjb32803 said:
Download and Installation info in Post #1..
Click to expand...
Click to collapse
I almost forgot to mention that this build has been working very well. :thumbup:
I haven't encountered any Firmware issues with it (thus far).
Thank you very much!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
New Build 06-02-2018
New build has been posted.
Download instructions can be found in Post #1
Tested for the past 18 hours. Stable with good battery life.
I would love so very much to update my SCH-I535 with your awesome LineageOS build - thank you for doing this! However, is it true that if my GS3 OTA updated to Android 4.4.2 than I'm totally out of luck and am forever stuck with crappy old Android?? I hope not
richaardvark said:
I would love so very much to update my SCH-I535 with your awesome LineageOS build - thank you for doing this! However, is it true that if my GS3 OTA updated to Android 4.4.2 than I'm totally out of luck and am forever stuck with crappy old Android?? I hope not
Click to expand...
Click to collapse
Sorry to be the one to tell you, but yes, with 4.4 you got KNOX installed and cannot unlock your bootloader without bricking the phone.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.0 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Camera
Video Playback
Audio
Sensors
LED
GPS
What's not working :
Flash , same as mm , add in power menu and reboot , it will work
FM radio
Instructions :
Flash firmware 6.6.10.1
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads:
AFH LINK
Google Apps: http://opengapps.org/
Device wiki:
Official wiki link - currently not available , wil be added soon
Credits:
@faizauthar12 for always being there, @Nihhaar for the numerous inital tests (which dint pan out so well)
and all other members of the tele group for the immense testing that i made them do anand, pranav kumar, johndoe for his wise comments thanks to others who i forgot to mention
CyanogenMod Team
Xiaomi: For providing the Kernel Source Code
XDA:DevDB Information
[ROM][UNOFFICIAL][7.1.1][ferrari] CyanogenMod 14.1, ROM for the Xiaomi Mi 4i
Contributors
Rohan purohit
Source Code: https://github.com/CyanogenMod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2016-12-11
Last Updated 2016-12-22
Source Code:
Device Tree(s):
android_device_xiaomi_ferrari: https://github.com/CyanogenMod/android_device_xiaomi_ferrari/tree/cm-14.1
(Gerrit)
ferr-dev-team
Kernel Tree:
android_kernel_xiaomi_ferrari: https://github.com/CyanogenMod/android_kernel_xiaomi_ferrari/tree/cm-14.1
ferr-dev-team
Vendor:
proprietary_vendor_xiaomi: https://github.com/TheMuppets/proprietary_vendor_xiaomi/tree/cm-14.1 (For WIP:
[url]https://github.com/Ferrari-Dev-Team/android_vendor_xiaomi_ferrari[/URL]
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Frequently Asked Questions:
Q)OH MY,.. CRASHES!?
A)This is a very early build of CyanogenMod running nougat and things are still WIP.
You may experience number of crashers here and there. These will be get fixed with time.
Q)Why is this UNOFFICIAL?
A)Because, we need our device to be bug free before enabling official CyanogenMod nightlies.
Q) Is VoLTE supported?
A) No. Not UNLESS XIAOMI decides to release modem with enabled volte ( OR anyone here can port it , dont ask questions about how)
Q) Where are Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How do I update GApps? (Also useful if you have GApps related problems).
A) Reboot to recovery. Wipe System, Cache and Dalvik Cache. Install ROM + GApps. (Yes, without rebooting). Reboot.
great work..
Great Work
Awesome work bro
Keep it UP
-TechExhibeo
Excellent! From the problems that I noticed, problems with charging. Log unfortunately can not provide. When plugging charging it just can not be charged. In the off state, all is well, and if enabled, the phone will start charging
Damnnn....Why I am getting so many good news now days.Nougat is already here.....SHERLOCK will be back on 1.1.2017. ..I am feeling good.
Thanx @Rohan purohit.
Only for u guys this poor device is alive .
this is what i am talking about baby
@Rohan purohit
remember, FM Radio
I didn't expect this... Lol...
Btw is there some easy way to take log? I'll to help with log..
Edit : i just found an app to do logs!!!
Screenshots
Terrific work @Rohan purohit
Thank u man @Rohan purohit. Don't forget about the sensors which is the main bug in CM 13
Av. Sngh said:
Thank u man @Rohan purohit. Don't forget about the sensors which is the main bug in CM 13
Click to expand...
Click to collapse
now i am curious
did you already flash it?
and see the OP
sensor is working :laugh:
faizauthar12 said:
now i am curious
did you already flash it?
and see the OP
sensor is working :laugh:
Click to expand...
Click to collapse
No i Haven't flashed it yet coz this phone is my daily driver. For now the sensors are working according to the Dev. Lets hope they keep working in CM 14. Don't rewlly care about FM radio and Bluetooth.
BTW someone suggest me a good backup softwqre to take backup to PC before flashing.
finally thanks @Rohan purohit you the real MVP
Sorry for a little bit of offtop, but this is the most watching thread now I believe
The link to the telegram chat from this post ( http://forum.xda-developers.com/mi-...4i-ferrari-t3355702/post68651421#post68651421 ) has expired. Could someone please share the new one. I'd like to join this group to be one of the beta testers I have computer with adb on it, usb cable and pretty fast internet
Thanks in advance
PS. And of course I have Mi4i in my pocket
Wiped dalvik and cache,
Flashed this rom
Flashed gapps
Rebooted
Awesome work devs , didnt lost anything( i hadnt even taken backup before flashing and yes this is my daily driver ) ...looked like an update only.
When i think abt it , our device is running the latest version of android. I never thought a day like this might happen...
Kudos to all the devs... ?
I'd like to quote Bohemian Rhapsody by Queen here: "Is this the real life? Is this just fantasy?"
Hi everybody,
at first, I'm looking to this forum every day. Thank you for your hard work to all!
Since I'm new to flashing with Xiaomi Mi4i, can someone please help me with the instructions?
"Flash firmware 6.6.10.1" - where do I get the firmware?
"Download the latest build" - is this the first link provided under "Download" in the first post?
Are the sensors working with both things above or do I have to use a custom kernel or something?
Also, will my data stay available if I just do these steps or is everything lost? (I currently run the Global Dev version from Xiaomi officially)
Thanks!
thewavelength said:
Hi everybody,
at first, I'm looking to this forum every day. Thank you for your hard work to all!
Since I'm new to flashing with Xiaomi Mi4i, can someone please help me with the instructions?
"Flash firmware 6.6.10.1" - where do I get the firmware?
"Download the latest build" - is this the first link provided under "Download" in the first post?
Are the sensors working with both things above or do I have to use a custom kernel or something?
Also, will my data stay available if I just do these steps or is everything lost? (I currently run the Global Dev version from Xiaomi officially)
Thanks!
Click to expand...
Click to collapse
You're alone in this world, nobody is going to help you (atleast for a problem like this)
Search my dear friend, is what I would suggest. Search as much as you can because we've all become habituated to ignore posts like these.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I don't authorize to nobody to use any of the files of this project. Make your own ported rom by yourself
FEATURES
J600X
Android Pie ported from A7 2018 (SM-A750FN) to A3 and then to J6 xD
One UI
Arm64 native
Clean, debloated, fast, stable
S10 CSC with additional features
Digital wellbeing
Call recording, screen recording
DTS enabled for speaker and BT
Bixby Routines
Bixby Vision
VoLTE supported
...
CHANGELOG
V2:
Added all the features from H ROM
This fixed a few bugs like face unlock
Patched to work with Secure Folder (download zip from here and please give thanks: Secure Folder Fix
Fixed Smart View
V1:
Release
KNOWN BUGS
GPS can be unstable sometimes. It gets solved rebooting device
Wifi can be unstable sometimes. It gets solved rebooting device
Some 3rd part cameras don't work (eg.: Footej, Gcam, etc)
RadioFM doesn't work due to audio HAL used
AOD doesn't work
Probably broken NFC
May have more bugs
DOWNLOAD
As per creator's request, links have been removed
FLASHING INSTRUCTIONS
Wipe system, data, dalvik&cache, cache
Flash rom zip
Reboot
Note: This has Helios 3.1 included to run 64bits. Also rooted with Magisk.
Do not flash available Pie kernels unless they specify that they can run 64bits.
SCREENSHOTS
https://imgur.com/a/GivggZd
SUPPORT
Telegram group
CREDITS
@Astrako, for infinite hours spent with this port
@Valera1978 for his treble logic, kernel commits and hard work with 7870
@ananjaser1211 for his general help, kernel commits and hard work with 7870
@KassemSYR for helping us fix a few camera problems on this port. You rock!
@McFy for his general help and hard work with LOS
@topjohnwu for Magisk
Testers from Telegram group
DONATIONS
As quoted directly from Astrako:
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this port you can make me very happy just pushing THANKS
Please visit his thread and give a thanks: Click Here
XDA:DevDB Information
H-ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, Astrako, ananjaser1211
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-07-23
Created 2019-07-23
Last Updated 2019-07-23
FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of the ROM again
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted
[A] This ROM has Magisk pre-packaged. If you do not see Magisk Manager, just download the latest version of it in xda
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice
Join our Telegram group
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group
How to report a bug/Ask for a change
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway
Just so you know guys, I am constantly trying to fix bugs on this. My porting skills are not very good when it comes to odexed software lol
So I hope to make this port better over time.
H-ROM updated to V2 which adds stability and a few features I had previously removed.
Also it fixed face unlock oh and now, secure folder works. You just need to flash this: Secure Folder patch
Please give thanks to the post for making this zip to fix Secure Folder in this ROM
Enjoy!
Fixed Smart View.
Thanks to @KassemSYR who gave me the final key... to add lines in build.prop
I am looking forward to install this rom on my device but there are some things holding me back,specifically,how much unstable is the wifi?does it usually disconnect or something like that?or it does that not so usually?The second thing that's holding me back is that,my laptop has a corrupted hard drive,and because I am on vacation I cannot replace it at this time, but I can only run lubuntu (light ubuntu) on my laptop from a USB. So,if I actually want to flash this rom,as you may know Odin doesn't work on linux,is there any other way I could root my device and flash twrp? Thanks for reading
Kostas172 said:
I am looking forward to install this rom on my device but there are some things holding me back,specifically,how much unstable is the wifi?does it usually disconnect or something like that?or it does that not so usually?The second thing that's holding me back is that,my laptop has a corrupted hard drive,and because I am on vacation I cannot replace it at this time, but I can only run lubuntu (light ubuntu) on my laptop from a USB. So,if I actually want to flash this rom,as you may know Odin doesn't work on linux,is there any other way I could root my device and flash twrp? Thanks for reading
Click to expand...
Click to collapse
Well, honestly I've never had problems with WiFi. I only had to include it in the thread because it was reported on the original H ROM.
I can tell you with confidence that my WiFi has worked perfect.
When using any type of linux, you can use Heimdall instead of Odin
Thank you dude!! im testing the rom now:
Bugs:
1. Battery Drain (or bad battery performance).
2. The Rom is slower/laggy in multitask.
Please upload the wallpapers and ringtones in a flashable files, are amazing!!
Thanks for make this rom!
Thanks for make this rom very much^^
But I wish you add Bixby Voice in this rom.
This rom especially has very few bugs, haha
Knox
Hi sir, I'm a H-ROM A7 PORT V2.0 rom user now.
I want to add knox to this rom. How I Can?
ShaDisNX255 said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I don't authorize to nobody to use any of the files of this project. Make your own ported rom by yourself
FEATURES
J600X
Android Pie ported from A7 2018 (SM-A750FN) to A3 and then to J6 xD
One UI
Arm64 native
Clean, debloated, fast, stable
S10 CSC with additional features
Digital wellbeing
Call recording, screen recording
DTS enabled for speaker and BT
Bixby Routines
Bixby Vision
VoLTE supported
...
CHANGELOG
V2:
Added all the features from H ROM
This fixed a few bugs like face unlock
Patched to work with Secure Folder (download zip from here and please give thanks: Secure Folder Fix
Fixed Smart View
V1:
Release
KNOWN BUGS
GPS can be unstable sometimes. It gets solved rebooting device
Wifi can be unstable sometimes. It gets solved rebooting device
Some 3rd part cameras don't work (eg.: Footej, Gcam, etc)
RadioFM doesn't work due to audio HAL used
AOD doesn't work
Probably broken NFC
May have more bugs
DOWNLOAD
Google Drive
OneDrive
Old Version
V1.0:
Google Drive
FLASHING INSTRUCTIONS
Wipe system, data, dalvik&cache, cache
Flash rom zip
Reboot
Note: This has Helios 3.1 included to run 64bits. Also rooted with Magisk.
Do not flash available Pie kernels unless they specify that they can run 64bits.
SCREENSHOTS
https://imgur.com/a/GivggZd
SUPPORT
Telegram group
CREDITS
@Astrako, for infinite hours spent with this port
@Valera1978 for his treble logic, kernel commits and hard work with 7870
@ananjaser1211 for his general help, kernel commits and hard work with 7870
@KassemSYR for helping us fix a few camera problems on this port. You rock!
@McFy for his general help and hard work with LOS
@topjohnwu for Magisk
Testers from Telegram group
DONATIONS
As quoted directly from Astrako:
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this port you can make me very happy just pushing THANKS
Please visit his thread and give a thanks: Click Here
XDA:DevDB Information
H-ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, Astrako, ananjaser1211
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-07-23
Created 2019-07-23
Last Updated 2019-07-23
Click to expand...
Click to collapse
I am using v2
When I start calling someone the network disappeared but mobile data working fine only problem in calling
And I can't restore my stock rom
Plzz help
Finally it fixed....
You are no longer authorized to make a derivated post of my roms. Please, remove download links.
Please close this thread, thanks.
Thread closed.
Closed due to OP's request.
Camo.
XDA Moderation Team
Hi,
I took my first step into the world of custom ROMs in November 2017, when the stock Moto G3 ROM was no longer getting security updates. I installed LineageOS 14.1 and have been using it happily since. It has suited me perfectly, very few problems, stock Android and I don't need root. I'm grateful to all those who have made this possible - the names I know are Alberto97 and squid2, I'm sure many others have contributed too.
Now LineageOS 14.1 is no longer supported, I've been following the thread [ROM][osprey] Official LineageOS 14.1 and checking squid2's posts and it seems to have gone quiet on that front. So I'm now in search of a really stable replacement ROM that's getting security updates, suitable for daily driver and a risk-averse user with limited experience of custom ROMs. I don't mind which Android version.
Thanks in advance for suggestions!
Cheers,
Dave
The LineageOS 14.1 branch is still getting security updates, so it is possbile to build it yourself. I did it few days ago and using my own build with July 2019 security patches without any issues. The process however can take few hours and is not easy, if you're not familiar with it. I can upload my unofficial build that I'm using right now. You should be able to install it easily through TWRP, if you wipe your data first. However, if you would like to install it over official build without losing data, you'll have to switch to unofficial keys through ADB first. Can't post any links here, because of the new account, but you can find more information by searching "lineageos osprey build" in Google.
Thanks, @pkowalik for your helpful reply and offer of uploading your build. I'm hoping to find an official ROM (which I guess won't be LineageOS) that is still getting regular builds but if I don't have any luck with that, I may be glad of your offer, at least to keep my phone going for another couple of months.
Another user on the [ROM][osprey] Official LineageOS 14.1 thread was looking for a build with recent security patches, I'll point them to this thread.
Thanks again!
Hey @Dave here, as I mentioned before I can't post any links here yet, so I'll send you a link to my current build in a private message. If there will be more people interested, I'll think of creating a topic in "Moto G 2015 Android Development" section and upload future builds as soon as the next security patches are merged (after testing them on my device first).
Dave here said:
Hi,
I took my first step into the world of custom ROMs in November 2017, when the stock Moto G3 ROM was no longer getting security updates. I installed LineageOS 14.1 and have been using it happily since. It has suited me perfectly, very few problems, stock Android and I don't need root. I'm grateful to all those who have made this possible - the names I know are Alberto97 and squid2, I'm sure many others have contributed too.
Now LineageOS 14.1 is no longer supported, I've been following the thread [ROM][osprey] Official LineageOS 14.1 and checking squid2's posts and it seems to have gone quiet on that front. So I'm now in search of a really stable replacement ROM that's getting security updates, suitable for daily driver and a risk-averse user with limited experience of custom ROMs. I don't mind which Android version.
Thanks in advance for suggestions!
Cheers,
Dave
Click to expand...
Click to collapse
Hello i have a channel from telegram which posts almost all new ROMs
Link :- https://t.me/iammotog3
But as per your questions you said your enjoying Lineage 14.1
So as per my knowledge there is a maintainer updating Lineage 14.1 Unofficially and most of the current ROMs available to osprey are Unofficial , But according to my experience i can name a few in which you will face literally no issues
Pie ROMs :
1. Dirty Unicorns Pie ROM maintained by Chil360 (chil won't post any of his work on xda according to my knowledge he post in on telegram group only)
2. AICP ROM maintained by chil360
3. Gzosp maintained by chil360
All these three ROMs are likely to be most stable ROMs in pie
There are also few other ROM in pie
4. Lineage os pie - maintained by chil360 ,althafy, rahulxda9999 and one more dev (i don't remember his name correctly so avoiding to write) all these have different builds
5. AOSiP Pizza great rom maintained by chil360
6. Revenge os Only CAF pie ROM for osprey maintained by chil360
7. AOSiP Derpfest maintained by rahulxda999 and ruchil both have different builds
8. Resurrection Remix pie by heitezy
9. Havoc pie by ruchil
Viper Os pie and Crdroid pie probably got discontinued because of some issues with root
Oreo ROMs :
Not a single Oreo ROM is maintained these days
I think because of its high battery drain problems no one really interested in it .
But still there are few gems in stability / recommend by me if you really want to use android Oreo.
1. AOSP build by alberto97
2. AEX build by ishubhamsingh
Nougat ROMs :-
Nougat have the most stable ROMs for osprey, i believe.
But only 2 of them are maintained
1. Lineage os 14.1 maintained (Unofficially) in 3 varients by MSe1969
2. Resurrection Remix by Heitezy
But if recent security patches isn't the main issue then Viper os is my favourite in all Nougat Roms
That's all i knew about currently maintained ROMs
If i messed up some names then sorry for that
@pkowalik I would be interested in a unofficial LOS14 build.
@KBeng please check your inbox. Once I get access to development forum, I'll make my builds public.
pkowalik said:
@KBeng please check your inbox. Once I get access to development forum, I'll make my builds public.
Click to expand...
Click to collapse
Post your builds to telegram group
https://t.me/Moto_G_2015
Almost every dev post there test builds or stable builds
Thank you @lonkar for your suggestion. I've shared a link to the directory with my builds on Telegram group as well. Also new build including August 2019 security patches has been uploaded.
Thank you so much @pkowalik and @lonkar for your very helpful posts. Sorry for the slow response, it's been an eventful couple of weeks here when I couldn't risk being without a working phone. Hopefully things have calmed down a bit now.
That's an amazing list, @lonkar, thank you! I was feeling positive about going for something currently supported like Resurrection Remix Pie, though after reading through the whole thread for that ROM, there were enough mentions of battery drain & other issues to put me off a bit. Another discussion I came across suggested that battery drain was liable to be an issue for all Oreo & Pie ROMS for Osprey, I don't know whether that's true.
I also read the thread for MSe1969's LineageOS 14.1 builds and I see OTA support was just added, which makes that an appealing option.
Thanks again!
I am currently MSe1969's build that's the best option in my opinion. And its true that Oreo ROMs have battery drain issues its more like a battery leak than drain. And about pie it isn't that bad i mean its pretty good than oreo but isn't as good as Nougat Rom
Another issue on pie and oreo i would i like to mention is camera makes battery go down like 20% for 3 clicks its really annoying while your on trip and already on battery saving mode.
go for resurrectionremix ( pie ) . it has official build and regular updates as well . very much stable and with lots of custom features . i have been using it for a week now . heres is the link on xda : https://forum.xda-developers.com/2015-moto-g/development/rom-resurrection-remix-v7-0-1-t3914718
or you can directly download it from their official website .
How much battery life you are getting on lineage os 14.1?
I mean the SOT?
yes, I'm also interested in pie-rom where the battery life is good and encryption really works.
Currently I use official LineageOS 14.1 and have a display on time (SOT?) of 2-3 hours in 4-5 days of use.
lonkar said:
I am currently MSe1969's build that's the best option in my opinion. And its true that Oreo ROMs have battery drain issues its more like a battery leak than drain. And about pie it isn't that bad i mean its pretty good than oreo but isn't as good as Nougat Rom
Another issue on pie and oreo i would i like to mention is camera makes battery go down like 20% for 3 clicks its really annoying while your on trip and already on battery saving mode.
Click to expand...
Click to collapse
I agree. I have been trying the official 14.1 LOS for osprey since yesterday. This along with squids kernel gives the best battery backup I think.
Dave here said:
Thank you so much @pkowalik and @lonkar for your very helpful posts. Sorry for the slow response, it's been an eventful couple of weeks here when I couldn't risk being without a working phone. Hopefully things have calmed down a bit now.
That's an amazing list, @lonkar, thank you! I was feeling positive about going for something currently supported like Resurrection Remix Pie, though after reading through the whole thread for that ROM, there were enough mentions of battery drain & other issues to put me off a bit. Another discussion I came across suggested that battery drain was liable to be an issue for all Oreo & Pie ROMS for Osprey, I don't know whether that's true.
I also read the thread for MSe1969's LineageOS 14.1 builds and I see OTA support was just added, which makes that an appealing option.
Thanks again!
Click to expand...
Click to collapse
lonkar said:
I am currently MSe1969's build that's the best option in my opinion. And its true that Oreo ROMs have battery drain issues its more like a battery leak than drain. And about pie it isn't that bad i mean its pretty good than oreo but isn't as good as Nougat Rom
Another issue on pie and oreo i would i like to mention is camera makes battery go down like 20% for 3 clicks its really annoying while your on trip and already on battery saving mode.
Click to expand...
Click to collapse
saikat08 said:
I agree. I have been trying the official 14.1 LOS for osprey since yesterday. This along with squids kernel gives the best battery backup I think.
Click to expand...
Click to collapse
Hi.
I want to know if by installing this ROM, I will be able to use the safety net.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KamiOh said:
Hi.
I want to know if by installing this ROM, I will be able to use the safety net.
Click to expand...
Click to collapse
LOS 14.1 status -
You also get project /e/ which is quite a big project and includes the Motog 2015 as one of its 81 devices supported:
https://e.foundation/
https://gitlab.e.foundation/e/wiki/en/wikis/device/osprey/info
Bump.
I tried the latest Resurrection Remix pie by heitezy build, but it is buggy.
I'm used to LOS and RR ROMs, so I'm not well informed about others ROMs.
My first guess would have been to give a try to LOS 17.1 by chil360, but I can't find the patch notes, and as I'm not the primary user of the phone, I don't want to have to grope for too much ROMS before finding the right one.
MSe1969's LineageOS 14.1 seems very stable and well updated, but it would be quite a stepback from RR 6.
I aim for stability, good battery life, steady security updates, but with a minimum of available customisation.
There are handful of Stable Q and P ROMs getting updates
https://telegram.dog/iammotog3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled ROMs, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best ROM we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub...
What is PAX?
Our release of Android 10, titled CR-8.0, is codenamed PAX after the latin word for peace and Pax, the roman godess for peace.
PAX provides you with the features you need while keeping the focus on delivering an elegant, smooth, and well polished experience. PAX delivers a set of unique features, like a systemwide font engine that also allows for applying fonts on user apps while supporting user fonts through custom APKs generated on fonts.carbonrom.org. We are confident you'll love it, and there's many more things to discover
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! As always, make sure to do backups.
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server or Telegram group! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
Requirements:
10.0.36 on both slots before install.
Valid backup of your persist partition or a working calibration for fingerprint(directions are elsewhere on XDA) THIS IS REQUIRED FOR FINGERPRINT TO WORK!
Install:
Code:
Due to limitations of our current TWRP you cannot install TWRP to recovery, you must wipe in fastboot as TWRP does not wipe properly.
To install CarbonROM:
fastboot boot TWRP
Flash Carbon.zip in TWRP
Reboot to Bootloader
fastboot boot TWRP
Flash gapps of your choosing in TWRP(opengapps pico has best battery life atm)
Reboot to Bootloader
fastboot -w
fastboot flash persist <your persist backup>.img
fastboot reboot
Download
Join the CarbonROM Discord server
Meet us on Telegram
Homepage
GitHub
Kernel source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
CarbonROM, ROM for the OnePlus 7T Pro McLaren
Contributors
me2151, Myself5, Albinoman887, CarbonROM Team
ROM OS Version: Android 10
Version Information
Status: Nightly
Current Stable Version: CR-8.0
Stable Release Date: 2020-09-09
Created 2020-09-09
Last Updated 2020-09-09
Thanks for adding this! The ROMs for this device have been a bit dry, it's nice to see some more support for it. Excited to try it out!
SaxManDan said:
Thanks for adding this! The ROMs for this device have been a bit dry, it's nice to see some more support for it. Excited to try it out!
Click to expand...
Click to collapse
Most development goes on in Telegram. A few examples: Bliss, Revolution Remix.
Vortextuality said:
Most development goes on in Telegram. A few examples: Bliss, Revolution Remix.
Click to expand...
Click to collapse
Would you please provide a link if you wouldn't mind? Thanks
I had problems and I got help and figured it out this is what I had to do.
1 . Fastboot -W
2. Fastboot boot twrp ( I had to use 2 different versions due to my phone being a pain in the butI used twrp 3.3.x.x to push the carbonrom zip to the phone then rebooted back to bootloader the fastboot boot twrp version 3.4.x.x. to install Carbon Rom you may have better luck with the 7pro twrp 4.4.x.x to install this rom)
4.Reboot to Bootloader (I skipped 5-7 cause I did not want google on my phone the less the better my opinion)
5. fastboot boot TWRP
6. Flash gapps of your choosing in TWRP(opengapps pico has best battery life atm)
7. Reboot to Bootloader
8. fastboot -w
9. fastboot flash persist <your persist backup>.img ( I lost fingerprint scanner cause I could not read directions use the msm tool to get your persist backed up if you like to use the fingerprint scanner)
albaniandroid said:
Would you please provide a link if you wouldn't mind? Thanks
Click to expand...
Click to collapse
{Mod edit}
Vortextuality said:
{Mod edit}
Click to expand...
Click to collapse
Moderator Announcement: THREAD CLEANED!
We grant developers the privilege to post links to their social media in the OP of their own development thread; these conditions did not apply to the posts cleaned.
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse
Oswald Boelcke said:
Moderator Announcement: THREAD CLEANED!
We grant developers the privilege to post links to their social media in the OP of their own development thread; these conditions did not apply to the posts cleaned.
XDA Forum Rules (excerpt):
Click to expand...
Click to collapse
actually yeah why cant telegram be linked by vortex when it was a reply to a question regarding something that had nothing to do with the OP
Without a working TWRP how do we go about flashing this? Through fastboot?
ajsmsg78 said:
Without a working TWRP how do we go about flashing this? Through fastboot?
Click to expand...
Click to collapse
Instructions state that you boot TWRP, don't flash it, and you can install through that.
champ784 said:
Instructions state that you boot TWRP, don't flash it, and you can install through that.
Click to expand...
Click to collapse
I'm aware of booting TWRP. Nothing installs in TWRP as nothing mounts, unless there's some magical version of TWRP I don't know about.
ajsmsg78 said:
I'm aware of booting TWRP. Nothing installs in TWRP as nothing mounts, unless there's some magical version of TWRP I don't know about.
Click to expand...
Click to collapse
Just TWRP wroks fine.
ajsmsg78 said:
I'm aware of booting TWRP. Nothing installs in TWRP as nothing mounts, unless there's some magical version of TWRP I don't know about.
Click to expand...
Click to collapse
You'll get error codes, but with the latest version of TWRP from the telegram group, it'll still finish the installation successfully
champ784 said:
You'll get error codes, but with the latest version of TWRP from the telegram group, it'll still finish the installation successfully
Click to expand...
Click to collapse
Found it, thanks.
champ784 said:
You'll get error codes, but with the latest version of TWRP from the telegram group, it'll still finish the installation successfully
Click to expand...
Click to collapse
Hi I was wondering if you could provide me the link ti get the twrp for telegram? Please
which TWRP version works ? I tried 3.4.0.2 and 3.4.0.12, both finish with error but not able to boot up
Does someone just have a link to the TWRP? Seems pretty silly to be only in telegram which i cant access because my phone doesn't have an OS and you cant log in on desktop without your phone
Edit: It's in the discord too lmao, enjoy the treasure hunt
I flashed the may build all went well.tried using verizon everything works...phone calls sms only issue no data.cant send mms or surf the web.anyone have any suggestions? Things i tried...adding new apn which i cant wont allow me.tried using global mode and a few others same thing.any help would be greatly appreciated.also flashed on 10.4 firmware...
If we want to use a more recent upload of this ROM from the official sight (not cr9) is 10.0.36 (at least) still ok or do we need to start from from a later version of the stock ROM on both slots?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 11 (R), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
Device tree source code: LineageOS/android_device_motorola_osprey
Device tree source code: LineageOS/android_device_motorola_merlin
Kernel source code: LineageOS/android_kernel_motorola_msm8916
Working:
Camera (and flashlight)
Encryption
WiFi
Battery LED
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
GPS
VoLTE
Bugs:
Slow boot
Ui is laggy
Nothing (?)
Compatibility:
MotoG3 variants (XT1540, XT1541, XT1542, XT1543, XT1544, XT1548 and XT1550)MotoG3 Turbo variants (XT1556 and XT1557)
Downloads:
Download links (osprey)
Download links (merlin)
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
Reboot to recovery
Format /system, /data and /cache
Install LineageOS zip package
Install [optional] a Google Apps package of your choice (Open GApps is advisable, but stock and super variants are not recommended!!!)
Important notes:
* Required * firmware version must be based on Marshmallow
GApps can only be flashed on clean installs.
Formatting data (all user data is wiped, including internal storage) is a must if Stockrom was previously installed and device was encrypted.
Credits & collaborations:
All LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Device wiki:
Official wiki link osprey
Official wiki link merlin
DONATIONS : Paypal
Contributors
althafvly, Chil360, squid2, jeferson1979
Source Code: https://github.com/MOTO-M8916
Reserved
Amazing... Android 11 for a 2015 device that launched with Android 5.1.1 Lollipop. You gotta love XDA and the committed developers like @althafvly who keep development alive for the Osprey/Merlin. Thanks OP for your continued hard work.
Updated to LineageOS-18.1
Link in OP
althafvly said:
Updated to LineageOS-18.1
Link in OP
Click to expand...
Click to collapse
@althafvly thanks again for this Android 11 goodness for the Osprey & Merlin. What are your recommendations, if any, as to a suitable GApps package for this ROM?
I haven't used this phone since LineageOS 7.1 because I didn't want to run it with very old security updates, so thanks for building this. I always use my previous phone as a backup,. I did a fresh install and it went flawlessly and it runs great with all my apps. I really like that I could restore the apps from my newer Moto G6 to this phone with my Google Drive backup. For the previous poster, I used the Gapps mentioned by the author.
Xxxxxxccccc. Xcccccc
New Build (osprey)
- Fixed encryption
lineage-18.1-20210301-UNOFFICIAL-osprey.zip | by althafvly for Moto G 2015
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
althafvly said:
New Build (osprey)
Can I just update to this build from your previous one without losing my apps, settings and/or gapps? It's been a long time since I messed with ROMs.
Thanks
Click to expand...
Click to collapse
I would like it to become official and to be able to opt for that rom, since the battery consumption is very high
I recently saw that LineageOS 18.1 is out for nearly 60 devices, can't wait for the release of the official build in LineageOS website for Osprey. Is there any known release date ?
alex-grey said:
I would like it to become official and to be able to opt for that rom, since the battery consumption is very high
Click to expand...
Click to collapse
If you find battery consumption on the latest unofficial build is high, chances are, it will still be high if this build becomes official at the moment. AFAIK, there are some things that need to be checked in order for a build to be certified as "Official".
Ska2 said:
I recently saw that LineageOS 18.1 is out for nearly 60 devices, can't wait for the release of the official build in LineageOS website for Osprey. Is there any known release date ?
Click to expand...
Click to collapse
Hey, since the device is really old & we don't see even that the LOS17.1 builds aren't rock solid, I wouldn't hope for 18.1 builds any time before 3-4 months. Also, I've seen people reporting the official 18.1 build are also having some issues for some device... And, as I mentioned above, there are some check boxes that need to be checked in order to gain the "Official" build tag. Hope you'll understand.
New build is up (check OP for download link)
Thanks. Great work.
Installed over previous build with 20201108 OpenGapps 11 without factory reset and booted on the first try in no time. Didn't like my Mirco SD though but nothing that couldn't be fixed with a backup, reformat and restore. Is there a newer build of OpenGapps 11 available?
Also, can't seem to add any widgets to the home screen.
New Build is Up (Gapps Included)
Most things seem to work but I can't seem to get the option to add widgets to the home screen with the long press anymore.
Any news about official lineage 18.1?
I'm using the official LineageOS 17.1 as a daily driver, so shall i upgrade to 18.1 or it still has bugs ?
Is there a specific version of recovery needed to install this, or would latest LOS 17.1 recovery work?
Also, is there a site with all old LOS 17.1 recoveries? LOS site only has links to the latest 4.
Just tested the ROM.
Yes, regarding the booting, first boot after installation took 7.5 minutes... Although subsequent boots take around one minute.
But I stumbled with serious sound problems, which I'd like to ask about here. But first, background:
XT1543 variant.
Began with ancient CyamogenMod 12 (Android 5.1.1), so I had to first find a 6.0.1 stock ROM.
Found it, entered Lineage Recovery -latest version-, formatted all /system, /data and /cache, installed stock ROM, booted it at least once.
Back to recovery, formatted again /system, /data and /cache, and tried installing first LOS 17.1, which is EOL, but latest LOS one which was official. Then installed Gaps pico.
Booted, all good apparently... except no sound.
Digging a bit more, I realized it's the speaker, or loudspeaker, the one not working at all.
Callings do work normally, sound and mic work, but all other multimedia sound don't: Youtube, ringtones, sound files...
However, they do work only when plugging 3.5 mm jack headphones/headsets. Sound is heard through them indeed. But only with them. Unplugging... no sound again.
So then I tried this 18.1 ROM. No dice: exact same problem.
@althafvly :
Can you, or someone else, help with this big issue?
Thanks.
ctcx said:
[…] tried installing first LOS 17.1 […] Booted, all good apparently... except no sound.
Digging a bit more, I realized it's the speaker, or loudspeaker, the one not working at all.
Callings do work normally, sound and mic work, but all other multimedia sound don't: Youtube, ringtones, sound files...
Click to expand...
Click to collapse
Did it work correctly on CyanogenMod or the stock ROM? Moto G3 has some mechanical issues that may cause things like speaker (though this does not affect all sounds) or camera to not work, perhaps in your case it is not a software problem?