TWRP 3.1.1.0 MOD CATUVA21
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
hello with all, good I leave this twrp recovery, since there are several for this cell mate 10 lite.
this twrp recovery is not my compilation is a modification of the twrp of OpenKirin.
this recovery especially makes the best backup of the boot, cust, product, system, vendor and version partitions.
I have tried other twrp recovery, and it always has failures when restoring the backup in the partition data and product; at the time of restoration was without logo and without sound, the camera did not work, and other failures more.
with this twrp recovery does not happen, when restoring the backup it is very good without failures.
DETAILS:
- The partitions have been reduced and configured for their best facility.
- make a full backup.
- you can install partitions with img extension.
Requirements:
Bootloader unlocked
FRP Unlocked
Installation guide (*.img):
- if you already have another twrp recovery
- save the recovery TWRPMATE10LITE.img in the external memory.
- enter twrp recovery.
- click install
- select storage Micro Sdcard
- change to install image
- search and click on the image TWRPMATE10LITE.img
- and search for the recovery partition (not the recovey2) and swipe to install
- restart in recovery, you'll have a new recovery twrp.
Installation guide (*.zip)
- download and unzip the file to a computer with windows system.
- connect the cell phone to the computer in fastboot mode.
- run the TWRP 3.1.1 NOUGAT file
- follow the steps and ready.
how to make full backup
- enter twrp recovery
- click backup
- select the external memory (MicroSDcard), do not use internal memory
- select only boot, cust, data, system, vendor, product_image, and version (do not select Oeminfo)
- if it gives data failure, deselects the data data
- swipe to make the backup, and let it finish. that is all
for a backup?
- if you installed a custom rom, and did not like to restore your original system
- if you became root and have some failures
- every time you make some change and you can restore..
Modified by:
CATUVA21
Credits:
OpenKirin
Version Information:
Status: Stable
Created on: 2018-04-05
Last Updated on: 2018-04-05.
TWRP RECOVERY 3.1.1.0
Download Links:
in image format
https://mega.nz/#!R7IWVBzY!ZouQmplSf_D_xEzFwBpgHEmnEY9i0uLMHJHgi7rRYZA
automated file
https://mega.nz/#!x3gxTKQR!P_QPt9l4dwdQpz6A7-FeqYEk_DyY84fWiLKKh4C97Fo
I'm kinda new with this phone (1 week) I'm coming from Xiaomi device, so can you tell me why every time I flash twrp via fastboot I can access only one time then I always boot to erecovery?
CATUVA21 said:
TWRP RECOVERY 3.1.1.0
Download Links:
in image format
https://mega.nz/#!R7IWVBzY!ZouQmplSf_D_xEzFwBpgHEmnEY9i0uLMHJHgi7rRYZA
automated file
https://mega.nz/#!x3gxTKQR!P_QPt9l4dwdQpz6A7-FeqYEk_DyY84fWiLKKh4C97Fo
Click to expand...
Click to collapse
Bro can u add support for oreo 8.0 to recovery.
Xngel said:
I'm kinda new with this phone (1 week) I'm coming from Xiaomi device, so can you tell me why every time I flash twrp via fastboot I can access only one time then I always boot to erecovery?
Click to expand...
Click to collapse
you have to press simultaneously
vol +
vol -
power button
Respuestas!
:confuso::confuso::confuso::confuso::confuso::confuso:
gandalf147 said:
you have to press simultaneously
vol +
vol -
power button
Click to expand...
Click to collapse
gandalf147 said:
you have to press simultaneously
vol +
vol -
power button
Click to expand...
Click to collapse
Hey, so I ran the BAT file and started phone with + - Power, but EMUI says Failed to Install Update. Then all I can do is reboot to system. Can I flash IMG via fastboot?
Bootloader FRP unlocked.
I am on oreo can i use this recovery?
TWRP decrypted?
hi Catuva21,
do you have nougat twrp we can use for encrypted Data?
thanks in advance
gymfitboi said:
hi Catuva21,
do you have nougat twrp we can use for encrypted Data?
thanks in advance
Click to expand...
Click to collapse
I have found a way with my encrypted data.
Thank you
Hi guys, can you add support for Oreo?
Because there is one twrp for Oreo but its bad bcs it boots into twrp, not into normal system and makes errors in magisk.
Thanks
Thank you very much, but how can I make Bootloader unlocked while the formal site of Huawei is blocked the way of getting the code?!!!
Please guys, I NEED YOUR HELP.
Thanks on advance.
Related
Delete all fingerprints and face unlocks ect
flash this TWRP
https://mega.nz/#!xUcBxKLZ!MJv5xk86GAJOEKl1KRS-tKr5wvkBFTOI0DgosaEUkXA
its in chinese (from here https://forum.xda-developers.com/p9/development/rom-t3891817)
(credit sasi2006166)
click cog wheel and choose english
go back and choose 'WIPE'
choose 'WIPE DATA'
type 'yes' and slide
GO BACK AND CLICK 'ADVANCED' -> FIX ENCRYPTION
REBOOT AND HAVE FUN.
HIGHLY RECOMMENDED TO USE MIGRATE APP: https://forum.xda-developers.com/android/apps-games/app-migrate-custom-rom-migration-tool-t3862763
tested on openkirin omnirom 9
The
kristiansja said:
Delete all fingerprints and face unlocks ect
flash this TWRP
https://mega.nz/#!xUcBxKLZ!MJv5xk86GAJOEKl1KRS-tKr5wvkBFTOI0DgosaEUkXA
its in chinese (from here https://forum.xda-developers.com/p9/development/rom-t3891817)
click cog wheel and choose english
go back and choose 'WIPE'
choose 'WIPE DATA'
type 'yes' and slide
GO BACK AND CLICK 'ADVANCED' -> FIX ENCRYPTION
REBOOT AND HAVE FUN.
HIGHLY RECOMMENDED TO USE MIGRATE APP: https://forum.xda-developers.com/android/apps-games/app-migrate-custom-rom-migration-tool-t3862763
tested on openkirin omnirom 9
Click to expand...
Click to collapse
With all that it does not decrypt EMUI 8 encryption but instead it wipes
Hence do not use it with stock AL10 Oreo, you will need to Factory reset from eRecovery
See eg
https://forum.xda-developers.com/showpost.php?p=78730191&postcount=5
https://forum.xda-developers.com/showpost.php?p=78735823&postcount=10
Hey bro
This is my twrp
sasi2006166 said:
Hey bro
This is my twrp
Click to expand...
Click to collapse
"......its in chinese (from here https://forum.xda-developers.com/p9/...t/rom-t3891817)"
technically it seems to be by someone called ICERYO on the chinese huawei forums
Yes but this is my file.
No problem but you can like or do a small donation
If you want.
You can use my file but in the description of the thread list me.
Thanks
Bro thanks so much for list me
Guys, if using this TWRP and after wiping Encryption (and fixing Encryption?!), would it be possible to flash back update* zip files (by TWRP) to restore stock Oreo (AL10c00b540)?
To continue use stock Oreo but also to have TWRP accessing Data and Internal memory?
Something like, what was described here for Honor 8:
https://forum.xda-developers.com/honor-8/development/twrp-honor-8-emui-8-t3886862
Also, @rambik33 opened another similar thread, but unfortunately with no further how-to details
https://forum.xda-developers.com/p9/how-to/data-encryption-eva-tl00-t3931230
@zgfg
the twrp here is chinese roots
the twrp on honor has only english and russian languages
the twrp of @rambik33 has no proof that its on 8.0, just it could be that same like honor 8 thread because he is from belarus
ant0nwax said:
@zgfg
the twrp here is chinese roots
the twrp on honor has only english and russian languages
the twrp of @rambik33 has no proof that its on 8.0, just it could be that same like honor 8 thread because he is from belarus
Click to expand...
Click to collapse
Only for you
rambik33 said:
Only for you
Click to expand...
Click to collapse
Thank you
rambik33 said:
Only for you
Click to expand...
Click to collapse
@rambik33 - did you please use this TWRP (from Post #1 as above):
TWRP-8.0.0-EVA-DECRYPTION SUPPORT.img
in your Decryption for stock Oreo TL00:
https://forum.xda-developers.com/p9/how-to/data-encryption-eva-tl00-t3931230/post79548164
Did you flash it by Fastboot to eRecovery, or you just used it from Recovery?
And/or, any other TWRP needed?
zgfg said:
@rambik33 - did you please use this TWRP (from Post #1 as above):
TWRP-8.0.0-EVA-DECRYPTION SUPPORT.img
in your Decryption for stock Oreo TL00:
https://forum.xda-developers.com/p9/how-to/data-encryption-eva-tl00-t3931230/post79548164
Did you flash it by Fastboot to eRecovery, or you just used it from Recovery?
And/or, any other TWRP needed?
Click to expand...
Click to collapse
Need other twrp.
First i flash via MT to recovery, then flash via twrp to erecovery and comeback stock recovery.
rambik33 said:
Need other twrp.
First i flash via MT to recovery, then flash via twrp to erecovery and comeback stock recovery.
Click to expand...
Click to collapse
But why cannot you flash directly by Fastboot to eRecovery, like:
fastboot flash erecovery_ramdisk TWRP-8.0.0-EVA-DECRYPTION SUPPORT.img
And then you don't need the other TWRP in Recovery (TWRP-3.2.1.0_Mod_9.img - was this your other TWRP?
zgfg said:
But why cannot you flash directly by Fastboot to eRecovery, like:
fastboot flash erecovery_ramdisk TWRP-8.0.0-EVA-DECRYPTION SUPPORT.img
And then you don't need the other TWRP in Recovery (TWRP-3.2.1.0_Mod_9.img - was this your other TWRP?
Click to expand...
Click to collapse
8/9 emui cant flash twrp to erecovery directly. Only via twrp.
For descript data i use another twrp, then restore folder hw_init and then use twrp...mod for mtp.
rambik33 said:
8/9 emui cant flash twrp to erecovery directly. Only via twrp.
For descript data i use another twrp, then restore folder hw_init and then use twrp...mod for mtp.
Click to expand...
Click to collapse
Finally, why it must be in eRecovery, cannot you just use TWRP-8.0.0-EVA-DECRYPTION SUPPORT.img from Recovery to Format Data and Fix encryption
Or it must be in eRecovery because of flashing update_full_EVA...zip and update_data...zip
Because it doesnt work and wont work.
Ok, flashing from Fastboot to eRecovery (erecovery_ramdisk) fails.
For flashing to eRecovery, Russian TWRP for Honor 9, TWRP-3.2.1.0_Mod_9.img from 4pda was used:
https://4pda.ru/forum/index.php?showtopic=934177&st=60#entry82590973
---
Edit: Revised Storage decryption guide:
https://forum.xda-developers.com/showpost.php?p=80029346&postcount=1843
Easier, shorter (no need for Russian TWRP), with Internal memory, NW patch, Face unlock, Magisk and its modules, even ECO Kernel - all surviving decryption (no need to back-up / install and configure them again)
---
So, made it for P9 dual SIM, rebranded to EVA-AL10c00b540 Patch02, with Network and Face unlock patches from @Tecalote
Credits to @rambik33 (made it for DL00c17b540), and to @ant0nwax (experimented and made it also for AL10c00b540)
* From Fastboot, flashed Russian TWRP to Recovery
* Rebooted to Russian TWRP in Recovery and from there:
- Flashed Chinese TWRP, TWRP-8.0.0-EVA-DECRYPTION SUPPORT.img from post #1, to eRecovery
- Flashed also ''regular' @Pretoriano80's TWRP P9-EVA-8.0.0-TWRP-v4.img to Recovery
* Rebooted to Chinese TWRP in eRecovery and from there:
- Format Data
- Flashed update_data_full_public.zip (from FullOTA b540), with Success
- Flashed b540-update_full_EVA-AL10_all_cn.zip @Tecalote provided based on TWRP logs from failing to flash the original update_full_EVA-AL10_all_cn.zip), with Success
- Fix encryption (all in that order)
* Booted to 'new' System to perform basic set-up, without configuring WiFi and accounts, and without restoring apps yet
- Dual SIM worked but VoLTE settings got lost
- Face Unlock settings were present
* Rebooted to Pretoriano's TWRP in Recovery
and/or Chinese TWRP in Recovery
- They both now read Internal memory and Data (as well as Cache, Dalwik) partitions
- Hence, they now also save their settings (check by rebooting to either of them
- Flashed (from either of the two TWRPs) Enable-Huawei-OTA.zip and stock Recovery AL10c00b540-Stock-RECOVERY_RAMDIS.img to Recovery
* Rebooted to System and configured WiFi (there was no keyboard, installed GBoard from SD card)
- Settings / About showing Patch02 but System Update notifies for OTA Patch02
- Successfully updated to OTA Patch02 (still with Chinese TWRP in eRecovery)
* Rebooted to Chinese TWRP in eRecovery:
- Flashed (my P9 is dual SIM) EVA-L19_b540-DualSIM_NetworkPatch-v2.6.zip (when you reboot to System you will see that VoLTE settings are present back) and VIE-EVA-FaceUnlock-Oreo-v1.5.zip
- Flashed Russian TWRP to Recovery
* Rebooted to Russian TWRP in Recovery:
- Fllashed stock eRecovery AL10c00b540-Stock-ERECOVERY_RAMDI.img to eRecovery
- Fllashed Pretoriano's (or Chinese, if you wish) TWRP to Recovery
* Rebooted to just flashed TWRP in Recovery:
- Flashed patched Ramdisk for Magisk v19.2
AL10c00b540_Patch02-Magisk_v19_2-Encrypt_AVB-Ramdisk.img (root)
* Rebooted to System, installed Magisk Manager and configured Google account
- SafetyNet ok, Playtore working fine and showing Device Certified
- Now, apps, settings, data can be carefully restored/reinstalled
All resources and utilities can be found on my Mega:
https://mega.nz/#F!JwkVyRya!Rb7OUE0z3PEpXBRxGOM-vQ
NOTE 1:
Procedure as above did not wipe Internal memory (only Data, Dalwik and Cache) but it made Internal memory also accessible to TWRPs
NOTE 2:
Russian TWRP is for Honor 9 and not recommended for Huawei P9, but only that TWRP has the option for flashing to eRecovery (and Fastboot cannot flash to eRecovery either).
Hence, when we need so, we temporarily flash Russian TWRP to Recovery to use it for flashing to eRecovery (Chinese TWRP or back the stock eRecovery), but immediately after, we flash Pretoriano's (or Chinese) TWRP or stock Recovery back to Recovery.
Still useless, it does nothing more than our versions. Completely BS that thing.
zips arent flashable without HWOTA or HuRu.
dkionline said:
Still useless, it does nothing more than our versions. Completely BS that thing.
zips arent flashable without HWOTA or HuRu.
Click to expand...
Click to collapse
It is useful, because of Nandroid backup
And update*.zip files are flashable, please read the post, it was updated
my playstore, google account on chinese ota factory resetted phone was not working and flashing the public update zip via TWRP made them work again, so @dkionline i would say some update zips ARE flashable in TWRP
This TWRP recovery is compiled from source & not official yet
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Website : https://twrp.me/umidigi/onemax.html
GitHub Release : Here (release name : TWRP-UMIDIGI-One_Max)
Version Information
ROM OS Version: 8.1.x Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel
Hey ! Good job ! I tried building my own TWRP today but then noticed someone already did it ! Does encryption work ? I cant seem to decrypt the partition after flashing your TWRP.
EDIT : Couldn't wait, ended up formatting with encryption disabled via a zip + magisk
I've then proceeded to flash some GSI for Android 9 (even tried Q Beta 3) and if we want 9.0 one day, some heavy work will be needed : Cellular doesn't work; other than that, it all seems fine to me, camera is only 12mpx, front is 13mpx. Haven't tested more, i'm back to stock
EDIT 2: After comparing camera from stock and gsi, GSI wins easily. The camera is not as slow as stock.
Are there any decent ROMs yet for this phone? LineageOS would be fantastic.
@kgoerbig not to my knowledge. Maybe I'll try porting a 9.0 GSI soon.
I'm not sure if this is helpful or not, but Umidigi posts stock ROM on there forum. Can ROMs be ported based on there code? Or is it more complicated then that?
https://community.umidigi.com/m/?a=viewthread&tid=18692
_cab13_ said:
Hey ! Good job ! I tried building my own TWRP today but then noticed someone already did it ! Does encryption work ? I cant seem to decrypt the partition after flashing your TWRP.
EDIT : Couldn't wait, ended up formatting with encryption disabled via a zip + magisk
I've then proceeded to flash some GSI for Android 9 (even tried Q Beta 3) and if we want 9.0 one day, some heavy work will be needed : Cellular doesn't work; other than that, it all seems fine to me, camera is only 12mpx, front is 13mpx. Haven't tested more, i'm back to stock
EDIT 2: After comparing camera from stock and gsi, GSI wins easily. The camera is not as slow as stock.
Click to expand...
Click to collapse
I have tested LineageOS 16.0 GSI Android 9.0 (and many others ...) and it works well, even GSM and Camera.
The only thing I cannot have is a complete root : I install Magisk 19.3 correctly, but applications cannot get root permission (Titanium Backup cannot have su permission)
Hi to all!!!
I've unlocked bootloader, flashed twrp in post but when I power Off and On+Vol - my device doesn't power up...
Also if I make fastboot reboot recovery, my device reboot in fastboot mode again...
What's wrong??? I would test Descendant_ThreeDotZero_arm64_aonly rom!!!!
Pls Help me!!!!
silviuss82 said:
Hi to all!!!
I've unlocked bootloader, flashed twrp in post but when I power Off and On+Vol - my device doesn't power up...
Also if I make fastboot reboot recovery, my device reboot in fastboot mode again...
What's wrong??? I would test Descendant_ThreeDotZero_arm64_aonly rom!!!!
Pls Help me!!!!
Click to expand...
Click to collapse
If you use the stock boot.img with an GSI system image, it will not boot, you must first flash Magisk.zip before reboot!
It will disable dm-verity, and you can boot after.
If it continue reboot in bootloader mode, use spflashtool to flash a stock rom and all will be right
Or if you have a TWRP backup, restore all partitions except boot/recovery/cache/system/data and you can boot
@ dreambo Can you make a writeup of properly unlocking the bootloader/rooting? Or did you use these methods?
https://community.umidigi.com/forum.php?mod=viewthread&tid=17376
https://www.youtube.com/watch?v=xM_M5XP--Z8&t=176s
I should be receiving my Umidigi One Max in a day or so, and do not want to bork anything up! I have SPflash installed both on a Win10 laptop, and on a Ubuntu Linux machine.
dreambo said:
If you use the stock boot.img with an GSI system image, it will not boot, you must first flash Magisk.zip before reboot!
It will disable dm-verity, and you can boot after.
If it continue reboot in bootloader mode, use spflashtool to flash a stock rom and all will be right
Or if you have a TWRP backup, restore all partitions except boot/recovery/cache/system/data and you can boot
Click to expand...
Click to collapse
kgoerbig said:
@ dreambo Can you make a writeup of properly unlocking the bootloader/rooting? Or did you use these methods?
https://community.umidigi.com/forum.php?mod=viewthread&tid=17376
https://www.youtube.com/watch?v=xM_M5XP--Z8&t=176s
I should be receiving my Umidigi One Max in a day or so, and do not want to bork anything up! I have SPflash installed both on a Win10 laptop, and on a Ubuntu Linux machine.
Click to expand...
Click to collapse
You do not need to unlock you phone, mine is rooted with Magisk and have TWRP installed without unlock bootloader.
Just use spflashtool to flash a stock rom, but replace the recovery by TWRP and the boot.img by magisk_patched.img one.
Here how I do exactly:
1- in my running stock rom, I install MagiskManager and install Magisk by choosing the last option (patch existing boot.img)
2- give it your stock boot.img (extracted from stock rom) and it create for you /sdcard/Download/magisk_patched.img
3- use this to replace your stock boot.img and use also TWRP.img to replace stock recovery.img and flash the whole rom with SPFlashTool
Can you backup with TWRP with a locked bootloader? Isn't write access blocked with a locked bootloader?
dreambo said:
You do not need to unlock you phone, mine is rooted with Magisk and have TWRP installed without unlock bootloader.
Just use spflashtool to flash a stock rom, but replace the recovery by TWRP and the boot.img by magisk_patched.img one.
Here how I do exactly:
1- in my running stock rom, I install MagiskManager and install Magisk by choosing the last option (patch existing boot.img)
2- give it your stock boot.img (extracted from stock rom) and it create for you /sdcard/Download/magisk_patched.img
3- use this to replace your stock boot.img and use also TWRP.img to replace stock recovery.img and flash the whole rom with SPFlashTool
Click to expand...
Click to collapse
kgoerbig said:
Can you backup with TWRP with a locked bootloader? Isn't write access blocked with a locked bootloader?
Click to expand...
Click to collapse
If you can run the TWRP with a locked bootloader (and you can in case of umidigi one max) you can do any thing
dreambo said:
If you can run the TWRP with a locked bootloader (and you can in case of umidigi one max) you can do any thing
Click to expand...
Click to collapse
One last question. =)
Which boot file from stock did you use to patch with?
Downloadable from: https://community.umidigi.com/forum.php?mod=forumdisplay&fid=211
UMIDIGI One Max V1.0
or
UMIDIGI One Max E V1.0
kgoerbig said:
One last question. =)
Which boot file from stock did you use to patch with?
Downloadable from: https://community.umidigi.com/forum.php?mod=forumdisplay&fid=211
UMIDIGI One Max V1.0
or
UMIDIGI One Max E V1.0
Click to expand...
Click to collapse
I have used the European one, UMIDIGI One Max E V1.0
So I just received my One Max today. I was able to patch the boot image, and root the phone. I also, installed TWRP, but I'm running into an issue. From TWRP, I formatted with a normal wipe, It asked "Do you want to do this, it wipes data encryption Etc". I typed yes, and it did it's thing. Rebooted. Setup my basic settings on the phone. I rebooted back into TWRP, and it immediatly asked for a "decryption" password. It also won't allow me to mount internal partitions or sdcard. This even after I rooted via a patched boot file, and verified root access while booted in android (with root verify app). What am I doing wrong for TWRP to gain access to storage?
"Couldn't wait, ended up formatting with encryption disabled via a zip + magisk"
How did you format without encryption? I try to format from TWRP, type 'yes' , to verify, and encryption is still active. I'd like to disable encryption, so that I can properly backup everything from TWRP.
kgoerbig said:
So I just received my One Max today. I was able to patch the boot image, and root the phone. I also, installed TWRP, but I'm running into an issue. From TWRP, I formatted with a normal wipe, It asked "Do you want to do this, it wipes data encryption Etc". I typed yes, and it did it's thing. Rebooted. Setup my basic settings on the phone. I rebooted back into TWRP, and it immediatly asked for a "decryption" password. It also won't allow me to mount internal partitions or sdcard. This even after I rooted via a patched boot file, and verified root access while booted in android (with root verify app). What am I doing wrong for TWRP to gain access to storage?
Click to expand...
Click to collapse
Search in xda forum a zip that you can flash with TWRP before installing the Magisk zip from TWRP.
its name is disable_dm_verity????.zip, it disable in the boot.img the encryption.
After that format the data partition (format and not wipe, it's important!) and reboot normally, and your data partition will not be encrypted
dreambo said:
Search in xda forum a zip that you can flash with TWRP before installing the Magisk zip from TWRP.
its name is disable_dm_verity????.zip, it disable in the boot.img the encryption.
After that format the data partition (format and not wipe, it's important!) and reboot normally, and your data partition will not be encrypted
Click to expand...
Click to collapse
I eventually found all the correct files to remove encryption. I also installed AOSP. I'm kind of torn between the stock and AOSP. AOSP has better performance, but one annoying aspect is that I cannot find anywhere in the settings to switch the navigation buttons in AOSP (Back button is on the far left, I like it on the right side). Seems trivial, but it's annoying. I can now fully backup & restore in TWRP, which makes life a lot easier.
kgoerbig said:
I eventually found all the correct files to remove encryption. I also installed AOSP. I'm kind of torn between the stock and AOSP. AOSP has better performance, but one annoying aspect is that I cannot find anywhere in the settings to switch the navigation buttons in AOSP (Back button is on the far left, I like it on the right side). Seems trivial, but it's annoying. I can now fully backup & restore in TWRP, which makes life a lot easier.
Click to expand...
Click to collapse
Which AOSP ? where do you found it ?
dreambo said:
Which AOSP ? where do you found it ?
Click to expand...
Click to collapse
This thread:
https://forum.xda-developers.com/android/development/umidigi-one-max-custom-rom-modding-t3942521
This Rom
https://github.com/phhusson/treble_experimentations/releases
Do a complete backup of stock from TWRP onto microsd or USB first! System, data, modem, nvram partitions etc. That way you can restore from TWRP, and not lose os, data, or nvram (IMEI).
Specifically, system-arm64-aonly-gapps-su.img.xz
1. Download and extract file you downloaded, onto your phone.
2. Do a format (type yes)
3. Install from TWRP as "image".
Hi guys,
I have made a bad decision in trying to clean install Lineage OS 17 and now my phone only goes to QUALCOMM CrashDump Mode or gets stuck in the TWRP splash screen.
I cannot even make it start in Fastboot mode.
What I did was:
- Install TWRP 3.3.1-4
- Wipe EVERYTHING from the advanced wipe option
- Sideload Lineage OS 17
- Reboot into recovery to discover that I had the OnePlus recovery back
- Install TWRP 3.3.1-4 again
- Reboot into recovery
- Install GApps
- Restart phone
- Get into infinite boot load of Lineage OS which after a couple of auto restart would take me to TWRP
- Panic
- Wipe EVERYTHING again
- By mistake sideload TWRP 3.3.1-4 instead of Lineage OS 17
- Reboot into recovery
- Get stuck in the splash screen of TWRP
- Reboot into Fastboot
- Get stuck in the OnePlus logo Fastboot Mode
- Somehow turned off the phone
Is there anyone that can help me please?
Flash fastboot stock ROMs
or
Use MSM Download Tool
Look here!
https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109
What do you think about starting with reading the flashing instructions before you attempt flashing ROM's. That would've prevented all the troubles you are experiencing.
Mr.FREE_Bird said:
What do you think about starting with reading the flashing instructions before you attempt flashing ROM's. That would've prevented all the troubles you are experiencing.
Click to expand...
Click to collapse
I managed to reset the device following the guide linked above but I am not able to have a Custom ROM yet.
It doesn't look like there is any "official" guide as I've seen many and each of them gives different instructions!
Ultimately what I found (and tried with no success) is:
- Have the phone automatically update to stock (Oxygen OS 9.0.9) after the reset mentioned above
- Boot into TWRP 3.3.1-14
- Wipe => Format Data: "yes"
- Reboot into TWRP 3.3.1-14
- Flash Stock ROM Oxygen 22 OTA 040 (android 10)
- Flash TWRP 3.3.1-14 installer
- Reboot to recovery
- Flash Stock ROM Oxygen 22 OTA 040 (android 10)
- Flash TWRP 3.3.1-14 installer
- Wipe => Advanced Wipe => Data and Dalvik/ART Cache
- Flash TWRP 3.3.1-14 installer
- Reboot to recovery
- Flash OpenGApps arm64 10
- Reboot to system
After this the phone automatically boots into Fastboot Mode, there is no way to make it try and load the OS.
If you have any better guide, can you please tell me where I can find it?
Thanks
NamingIT said:
I managed to reset the device following the guide linked above but I am not able to have a Custom ROM yet.
It doesn't look like there is any "official" guide as I've seen many and each of them gives different instructions!
Ultimately what I found (and tried with no success) is:
- Have the phone automatically update to stock (Oxygen OS 9.0.9) after the reset mentioned above
- Boot into TWRP 3.3.1-14
- Wipe => Format Data: "yes"
- Reboot into TWRP 3.3.1-14
- Flash Stock ROM Oxygen 22 OTA 040 (android 10)
- Flash TWRP 3.3.1-14 installer
- Reboot to recovery
- Flash Stock ROM Oxygen 22 OTA 040 (android 10)
- Flash TWRP 3.3.1-14 installer
- Wipe => Advanced Wipe => Data and Dalvik/ART Cache
- Flash TWRP 3.3.1-14 installer
- Reboot to recovery
- Flash OpenGApps arm64 10
- Reboot to system
After this the phone automatically boots into Fastboot Mode, there is no way to make it try and load the OS.
If you have any better guide, can you please tell me where I can find it?
Thanks
Click to expand...
Click to collapse
Hold on, what exactly do you want to achieve?
You want to flash LineageOS 17.0 right? I see, just like your first attempt, a couple of things going wrong.
This should work.
● Backup all your data.
● Make sure you have the latest OOS Pie Stable installed on both A and B slots.
● Download the latest LineageOS 17.0 build and Gapps for Android 10.
● Boot to TWRP.
● Wipe data and dalvik cache.
● Flash the ROM zip followed by the TWRP installer zip.
● Reboot to recovery.
● Flash Gapps (if you need Google Services etc).
● Reboot to system.
● Go trough the setup and after that you can reboot to TWRP again to flash Magisk if you need root.
This should work. :good:
Mr.FREE_Bird said:
Hold on, what exactly do you want to achieve?
You want to flash LineageOS 17.0 right? I see, just like your first attempt, a couple of things going wrong.
This should work.
● Backup all your data.
● Make sure you have the latest OOS Pie Stable installed on both A and B slots.
● Download the latest LineageOS 17.0 build and Gapps for Android 10.
● Boot to TWRP.
● Wipe data and dalvik cache.
● Flash the ROM zip followed by the TWRP installer zip.
● Reboot to recovery.
● Flash Gapps (if you need Google Services etc).
● Reboot to system.
● Go trough the setup and after that you can reboot to TWRP again to flash Magisk if you need root.
This should work. :good:
Click to expand...
Click to collapse
I have done exactly what you said. This time I was able to make the Lineage OS load but shortly after it gave me an error saying that "Android Setup keeps stopping" without that the wizard even starts.
I read online that in some cases you need to do a minimal setup before installing the GApps so I will try like that.
Definitely I got 1 step further though, thanks!
Device information
Device: Infinix Hot S 3 X573
Firmware version: X573-QL1668DEF-O-191126V57
Android version: 8.0
Bootloader Status: Locked
How to flash
1. Rooted device can flash Twrp recovery image by flashify app. But must make sure to backup stock recovery.
2. Backup device firmware. Follow Link to backup device:
https://forum.xda-developers.com/android/help/method-rooting-infinix-hot-s-3-t3920233
3. Boot device to edl mode, use any tool that can flash. Flash only Twrp recovery image.
4. Boot to Twrp recovery holding both volume up and power keys same time.
5. TWRP will ask for password, cancel.
6. Go to wipe, format and enter yes to wipe data. Can also select advance wipe and clean only data.
7. Reboot to twrp recovery again
8. Go to mount. Select mount system, data and vendor
9. Go back to install decryt zip file to disable encryption. Reboot to recovery to check or boot to system.
10. Done
Note
1. Never boot to system till all flash is done.
2. All X573 firmware build can flash the Twrp recovery.
3. It must be flashed on a patched boot.img if not the after reboot stock recovery will be replace.
4. Those who want root must not flash magisk zip by Twrp but should flash the patched boot.img by magisk.
Twrp performance status
Stable
It has the basic official properties
Download Link
Zip contain Twrp recovery and decryption file
Mega
https://mega.nz/#!qZZHjaya!sKEzLO5QneD5YsPuIDKh2w-2xMBI5jfoYgH3Wh10QqM
AndroidFilehost
https://www.androidfilehost.com/?fid=4349826312261826993
Twrp Version: 3.3.1-1
Source: Ported
Credit
XDA Forum creators
Twrp Team
TopJohnWu
Osmosis
Darshan1205
Awab228
HemanthJabalpuri
Adasi Kaakyire
Best of luck, in future development
Shoud i boot to edl mode by the method of adb?
Without open the back panel? Possible Becoz i have no much experience to open back panel of hot s3 ?
Can I use ADB fastboot to install this twrp on my Hot S3
My Firmware is X573-QL1668DEF-O-191126V50 should it work in my?
rs130301 said:
My Firmware is X573-QL1668DEF-O-191126V50 should it work in my?
Click to expand...
Click to collapse
Yes it should work but make sure you backup your current firmware
So this happened a couple minutes ago, i prepared my op7pro to update to the latest version available.
Here are the steps i took:
- Made a backup of the apps via Titanium Backup
- Removed all Magisk modules
- Downloaded the latest firmware via Oxygen Updater
- Moved it to root directory
- Checked the firmware via settings -> System Updates
- DID NOT INSTALL IT
- Went back to Masigk, installed the module "TWRP A/B Retention Script ", did not reboot
- Magisk again -> Install Magisk (install to inactive slot)
- Rebooted, and it stuck on the loading screen, i waited half an hour but kept stuck. So i decided to to reboot using the POWER BUTTON + ARROW UP Combination.
- Accessed TWRP via POWER BUTTON + ARROW DOWN Combination.
And here, is when i panicked. NO ACCESS TO THE INTERNAL STORAGE. I don't care about any data i have, i make backups, but i might **** my pants if i bricked the internal storage partition or something else. Right now i'm downloading the Fastboot roms, and the MSM Guac for All.
Which version of fastboot rom should i choose?
Additional Information:
- TWRP : 3.4.0.0 by mauronofrio
- Oneplus 7 pro EUROPE
- Bootloader Unlocked
EDIT: I was able to fix the partition using TWRP WIPE Data -> Format Data -> Reboot to Recovery
EDIT2: Flashed the firmware that i downloaded via the official Oneplus website via TWRP and it's working again.
I wouldn't have made the post if it wasn't for the partition problem, i've been flashing roms since the G1, this is embarassing. Anyways this issue has been SOLVED.
drakruka said:
So this happened a couple minutes ago, i prepared my op7pro to update to the latest version available.
Here are the steps i took:
- Made a backup of the apps via Titanium Backup
- Removed all Magisk modules
- Downloaded the latest firmware via Oxygen Updater
- Moved it to root directory
- Checked the firmware via settings -> System Updates
- DID NOT INSTALL IT
- Went back to Masigk, installed the module "TWRP A/B Retention Script ", did not reboot
- Magisk again -> Install Magisk (install to inactive slot)
- Rebooted, and it stuck on the loading screen, i waited half an hour but kept stuck. So i decided to to reboot using the POWER BUTTON + ARROW UP Combination.
- Accessed TWRP via POWER BUTTON + ARROW DOWN Combination.
And here, is when i panicked. NO ACCESS TO THE INTERNAL STORAGE. I don't care about any data i have, i make backups, but i might **** my pants if i bricked the internal storage partition or something else. Right now i'm downloading the Fastboot roms, and the MSM Guac for All.
Which version of fastboot rom should i choose?
Additional Information:
- TWRP : 3.4.0.0 by mauronofrio
- Oneplus 7 pro EUROPE
- Bootloader Unlocked
EDIT: I was able to fix the partition using TWRP WIPE Data -> Format Data -> Reboot to Recovery
EDIT2: Flashed the firmware that i downloaded via the official Oneplus website via TWRP and it's working again.
I wouldn't have made the post if it wasn't for the partition problem, i've been flashing roms since the G1, this is embarassing. Anyways this issue has been SOLVED.
Click to expand...
Click to collapse
I see the mistakes you made,
You need to remove module then install OOS
Don't reboot, install retention then install magisk to inactive slot. Reboot.
@soka said:
I see the mistakes you made,
You need to remove module then install OOS
Don't reboot, install retention then install magisk to inactive slot. Reboot.
Click to expand...
Click to collapse
Yes, thanks for taking the time, i forgot to install OOS that's what happened. I managed to fix it now. Thanks again
So you know this would be considered soft brick. Hard brick is no life no edl without test points. Just for clarification on the future
TheMadScientist said:
So you know this would be considered soft brick. Hard brick is no life no edl without test points. Just for clarification on the future
Click to expand...
Click to collapse
Yup
drakruka said:
Yes, thanks for taking the time, i forgot to install OOS that's what happened. I managed to fix it now. Thanks again
Click to expand...
Click to collapse
Glad you are back up and running. :good: