Related
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hello Guys !
In this thread you will find my custom ROM And Recovery for the Wiko DarkMoon
Please be sure to read (and re-read) this carefully in order to avoid unnecessary questions.
Instructions and Frequently asked questions (FAQ):
For Instructions jump into post #2.
FAQ jump into post #3.
Wiko DarkMoon internal memory re-partition, jump into post #4.
How to Revert to the STOCK Rom / Recovery / Partition Layout, jump into post #4.
Recovery INFO
The salient features of Carliv Touch Recovery include:
Based on CWM 6.0.4.4
Full Touch Support
With features of Cannibal Open Touch
Aroma File Manager Support
Support for both Edify and Amend scripting allows flashing all ROMs
Touch screen button controls
Advanced Backup
Advanced Restore
Delete old backups
Persistent settings
User-defined backup locations
ADB Sideload
Update CTR v2.5 (30/07/2014)
Changelogs:
New Menu Layout
Tar + Gzip Backup Compression : ( "Backup/Restore" -> "Default Backup Format" )
Your Backups will be smaller now, just like on the old native CWM
Removed "wipe all" option from wipe menu ( if you need to wipe system, use "format system" from "mounts/storage")
Rearanged menu order in root menu to restore CWM order
There's now an "nvram backup/restore" menu in "carliv" section
The nvram partition will be backed up in clockworkmod/backup folder as nvram.img. This will help if you lose IMEI and other communication features. It will work only if you have the nvram partition of size 0x500000 (check your scatter) and if you have the nvram defined as /dev/nvram path in recovery.fstab. If the nvram partition is damaged (as in flashing an oversized recovery) this will not help you, and you need SPFlashTools to reflash with format your phone official firmware, and after that flash this recovery, boot in recovery and restore nvram.
some other small changes.
Changelogs
Android 4.2.2 (JB) Based custom ROM:
Changelog Build v1.0 (February 22 2014)
Based on official Android 4.2.2 ROM (WIKO DARKMOON Version 8)
Kernel 3.4.5
Custom Mods:
User customize-able installation based on AROMA installer
Pre-rooted with SuperSU (v1.93)
Debloated
Added BusyBox (v1.22.1 - Stericson)
Added Ad blocker (patched "host" file)
Ziplagned apks (better performance)
init.d support with performance scripts
Network, wifi, power saving, and several other tweeks
Updated APN's from CyanogenMOD repo
Added Performance Control (several CPU/System Mods)
Added in-built Xposed framework and Latest Gravity BOX module v2.9.7 (Several System Mods)
Acess To the Mediatek MTK Eng Mode
Added the following Android 4.4 KitKat Goodies:
Apps (Including Google Launcher - GEL, with Voice Search )
Bootanimation
QuickOffice
And other necessary system files
Kernel:
Insecure
Removed Mediatek debugger (mtk.aee.aed Daemon; etc)
USB Mass Storage as Default (instead of MTP)
GPL Compliance:Kernel 3.4.5
Github Kernel Repo
Downloads:Dev-Host
WIKO_DarkMoon_JB_4.2.2_Stable_v1.0.zip - 386.12 MB
Mod_extended_USRDATA_2.5GB.zip - 7.07 MB
MT65xx_USB_VCOM_drivers.zip - 403.65 KB
Wiko_Recovery_and_FlashTool.zip - 12.54 MB
Credits:
SuperDragonPT
Wiko
Carliv (Awesome CWM based Recovery)
iBotPeaches, brut.all (for apktool)
amarullz (for AROMA Installer)
Chainfire (for SuperSU)
rovo89 (for the AWESOME Xposed Framework), Learn More Here
C3C076 (For the AWESOME Xposed GravityBox module), Learn More Here
bgcngm(For Maintaining the Gbox JB Branch)
h0rn3t and educk (for Performance Control), Learn More Here
XDA:DevDB Information
[RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG] , ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/Kernel_Wiko_DarkMoon_Custom
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-02-22
Created 2014-02-22
Last Updated 2015-02-14
How to flash custom recovery:
Make Sure your Phone is fully Charged
Make an Full Backup of your files (Photos/Contacts, etc)
Download The MT65xx_USB_VCOM_drivers.zip
Install The Mediatek VCOM Drivers (For Detailed Drivers instalation Instructions, please check this thread)
Download The Wiko Recovery and FlashTool
Extract the .zip and you'll see two folders "Recovery" and "SP_Flash_Tool"
Open "SP_Flash_Tool" > Flash_tool.exe > Scatter-Loading> And select the "MT6582_Android_scatter.txt" from the "Recovery" Folder
Turn OFF your Phone
Press "Download" (don't worry with the pop-up "Download-Warning" Message), press YES
Connect Your Phone to PC (Turned OFF) , The Flash Progress should beginn, when its succesfully Finished A Green Ring will shown.
Congrats The Recovery is installed
How to enter into recovery mode:
With the Phone completely turned off...
Press and hold VOL. UP + VOL DOWN + POWER keys and turn on the phone.
Keep holding the keys, wait until you see on Phone:
Code:
"Recovery Mode: Volume UP"
"Factory Mode: Volume Down"
Then Press on VOL. UP key, and Recovery will load.
Navigation under recovery mode:
As soon as the splash logo disappears, Carliv Touch Recovery menu will appear. Navigation is Full Touch.
You can also use VOLUME keys (navigate up with VOL. UP and navigate down with VOL. DOWN) and POWER key to apply the action.
Scroll Pages under Recovery: To Scroll page down you have to swipe right, and for scroll page up to swipe left. Also swipe left for Go Back.
Aroma File Manager:
This Recovery Supports the Aroma File Manager
Whats this? Check here
Download the Aroma File Manager
Then just copy the aroma .*zip into the "Clockworkmod" folder on the root of your SD Card
Flashing The ROM:
Copy The ROM to The External SDCard
On Recovery:
Wipe Menu> Wipe All Data - PreFlash (Select YES - Wipe All)
Wipe Dalvik Cache (Select YES - Wipe Dalvik Cache)
Install zip > Choose zip SDCard (Select the location of the ROM.zip)
And Follow The On-Screen AROMA Installer Instructions
In the End the Phone will Reboot Itself
The first Boot will take some minutes (it's normal)
F.A.Q
Q: How Can i acess The MTK Eng Mode?
A: GravityBox >Engineering Mode
Q: What Mods can i do on the Eng.Mode?
A: There are alot of things you can do, the two most common are:
Increasing volume Level:
MTK Menu> Hardware Testing> Audio> On the "headset mode" and "LoundSpeaker Mode" set max values to 145 (The max is 160, but i dont advise it, stay safe and use the 145 value)
Speed up the GPS reception :
(Before Going to the MTK Menu)
Open the app "FasterGPS", and give it root permissions
Choose your Continent, your region (at this point, your gps is properly configured with your country *.ntp values)
(Now on MTK Menu ...)
MTK Menu> Location> Location Based Service> On the "AGPS" tab, tick the "Enable A-GPS", and on the "EPO" tab, tick "Enable EPO" and "Auto Download" , this last option will download the EPO files it requires an data connection.
Start the app "GPS Status", in the first Satts Lock, you need to wait a little bit (it can take up to 15m, be sure you are in an Open Area).
When you get an good lock, on Satts, your DONE.
A: I dont see the Development Options, how can i acess it?
Q: Unlocking the Development Options:
Go to "Settings" > "About Phone"
Then tap 7 times on the "Build Number"
Q: Where are the Development Options?
A: Settings> Developer Options
Q: What is the Performance Control?
A: Its an Control Panel, where you can Change / managed the CPU Governors/ IO Shedulers / among several other things.
Q: The Launcher sometimes seems an bit laggy
A: Go to Settings> Developer Options> on "Window animation scale" set it to .5x, and on "Transition animation scale" set it to .5x
Q: I really like your work, how can i thank you?
A: You can press the "THANKS" button, and if you want, you can donate some beers to me
Wiko DarkMoon internal memory re-partition
Mod Extended Userdata v1 ( 2GB ) --> Removed / Use the v2
This Mod will extend userdata partition to 2GB (stock size is 1GB) and the rest of the space will remain for the internal sdcard
NOTE: Make an FULL backup of your Rom under Recovery, and don't forget to also backup your Internal SDCard since it will be full erased
Instructions:
Download the Mod extended USRDATA.zip
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt from the Internal_2GB_Mod Dir
Press Download
After flashing is complete, boot into recovery mode and format /data (under Mounts and Storage Menu)
Optionally, if you want to restore previously saved userdata, go to backup / restore > and restore data (advanced restore feature)
Profit
Mod Extended Userdata v2 (2.5 GB)
This Mod will extend userdata partition to 2.5GB (stock size is 1GB) and the rest of the space will remain for the internal sdcard
NOTE: Make an FULL backup of your Rom under Recovery, and don't forget to also backup your Internal SDCard since it will be full erased
Instructions:
Download the Mod extended USRDATA_2.5GB.zip
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt from the Internal_2.5GB_Mod Dir
Press Download
After flashing is complete, boot into recovery mode and format /data (under Mounts and Storage Menu)
Optionally, if you want to restore previously saved userdata, go to backup / restore > and restore data (advanced restore feature)
Profit
Reverting to the Stock ROM
This will revert back your phone to STOCK (including the stock recovery), in case you need to send your phone to the Service Center
Instructions:
Go to Wiko's website and download the latest Rom Version:
http://fr.wikomobile.com/maj.php?telephone=131
Follow the instructions given ...
Older instructions:
Download the DARKMOON_JB4.2.2._Stock Rom-wiko_rev8.zip
Use the SPFlashTool that i provided with the CWM Recovery .zip
Make sure phone is fully charged
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt
Press Download
After flashing is complete,you'll see an green circle
Profit
Thanks. Can you add some screenshots?
h3lder said:
Thanks. Can you add some screenshots?
Click to expand...
Click to collapse
Was Uploading, check under the ScreenShots TAB
Regards
I doubt:
on step "How to flash custom recovery" - before you can do this you need to have already rooted the device?
can you please add how to root the device? it will be nice to complete better all the info.. but is already great!
congrats and thanks you! as soon as i by my wiko darkmoon i will definitely try it!
sapoide said:
I doubt:
on step "How to flash custom recovery" - before you can do this you need to have already rooted the device?
can you please add how to root the device? it will be nice to complete better all the info.. but is already great!
congrats and thanks you! as soon as i by my wiko darkmoon i will definitely try it!
Click to expand...
Click to collapse
Hi
You can root with framaroot, but i dont think thats necessary.
Just flash The recovery, then The ROM.
Regards
superdragonpt said:
Hi
You can root with framaroot, but i dont think thats necessary.
Just flash The recovery, then The ROM.
Regards
Click to expand...
Click to collapse
Ok understood, thanks
Do this rom will work with my Xolo Q700S?
Sent from my Q700S using xda app-developers app
superdragonpt:
Where can you please downloaded the source code for kernel mt6582? Can you give me a link please?
Or: Your sources kernel what you gave to download are original (unchanged)?
Edit:
OK. I found where you can download the source. Sorry for the spam.
http://forum.xda-developers.com/showthread.php?t=2645756
http://forum.xda-developers.com/showthread.php?t=2650513
Hi
You guys are all crazy with the MTK leaked sources, but do you even have an clue what those sources are?
You cant just compile an source that's customize for other phone , thinking it will work on yours.
There's a lot of work to be done, and you need an huge amount of luck to have your phone drivers available in that source.
This said, I will appreciate that people avoid off-topic and other phones talk in this thread.
This ROM and recovery will only work on wiko darkmoon and Micromax a200 (clone).
If your using this ROM as a base for another MT6582 phone, please be an gentlemen and give proper credits.
Regards
Added Internal USRDATA Mod to the OP
Check post #4
Enjoy
superdragonpt said:
Added Internal USRDATA Mod to the OP
Check post #4
Enjoy
Click to expand...
Click to collapse
Great work, thanks.
Do you know by any chance if there is any option to add languages to this rom? Wiko doesn't include many languages. I can use locale2 from google play, but that only translates some of the functions.
skydancer79 said:
Great work, thanks.
Do you know by any chance if there is any option to add languages to this rom? Wiko doesn't include many languages. I can use locale2 from google play, but that only translates some of the functions.
Click to expand...
Click to collapse
The ROM is multi language.
What language where you looking for?
Regards
superdragonpt said:
The ROM is multi language.
What language where you looking for?
Regards
Click to expand...
Click to collapse
Slovenian...most android phones have it. Moto G had the same "problem"
skydancer79 said:
Slovenian...most android phones have it. Moto G had the same "problem"
Click to expand...
Click to collapse
Hi
Yes i know, when i made a MIUI rom for my old ZTE v970, i had an hard time trying to find the proper strings for your language.
Even on stock roms from big brands, its very rare to find support for that language.
Im trying to merge and revise some strings from various sources, maybe in an future version.
Regards
superdragonpt said:
Hi
Yes i know, when i made a MIUI rom for my old ZTE v970, i had an hard time trying to find the proper strings for your language.
Even on stock roms from big brands, its very rare to find support for that language.
Im trying to merge and revise some strings from various sources, maybe in an future version.
Regards
Click to expand...
Click to collapse
Great, that would be awsome.
As for rarity of my language, I find it quite well supported. Google Nexus has it, all Samsungs have it, so does HTC, Sony... I know Prestigio and Gsmart have it. CM also. It's not a big deal, but nevertheless - I wouldn't mind having it
Great ROM btw, very customizable.
skydancer79 said:
Great, that would be awsome.
As for rarity of my language, I find it quite well supported. Google Nexus has it, all Samsungs have it, so does HTC, Sony... I know Prestigio and Gsmart have it. CM also. It's not a big deal, but nevertheless - I wouldn't mind having it
Great ROM btw, very customizable.
Click to expand...
Click to collapse
Hi
Well good news and bad news
The good:
I managed to Build an UNOFFICIAL Lewa Rom for our device, currently fixing the lastest issues and adding multi-language support.
So since im currently working on this language strings, might as well use that work for this rom also.
Preview pics:
http://i.imgur.com/VAGpQI3.png
Http://imgur.com/1IADxZx
Http://imgur.com/1C56EO6
The bad:
From what i gather until now, only about 100 slovenian strings are compatible (this is less than 5% of overall translation files), will keep looking
Regards
superdragonpt said:
Hi
Well good news and bad news
The good:
I managed to Build an UNOFFICIAL Lewa Rom for our device, currently fixing the lastest issues and adding multi-language support.
So since im currently working on this language strings, might as well use that work for this rom also.
Preview pics:
http://i.imgur.com/VAGpQI3.png
Http://imgur.com/1IADxZx
Http://imgur.com/1C56EO6
The bad:
From what i gather until now, only about 100 slovenian strings are compatible (this is less than 5% of overall translation files), will keep looking
Regards
Click to expand...
Click to collapse
So is this ROM fully functional? I mean no bugs? For English language.. I could test it on my Turbo mini
This Is Important:
This is an aroma installer so you must use TWRP or Flashfire V31 and above. You will have the option in aroma installer to choose your type of install, Locked Bootloaders or Unlocked Bootloaders. The LockScreen will work on both locked and unlocked bootloaders. If you do not have unlocked bootloaders then do not wipe the dalvik cache or you will get Sytem UI FC. If you want to run xposed on locked bootloader you will have to disable stock lockscreen by setting lockscreen type to none. Then you will have to download a third part lockscreen app. Do this before you install xposed or wipe the dalvik cache. Stock MMS requires some mods to get working. Hangouts MMS works fine.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original base N5 firmware
Port files taken from N5 Firmware:N9200ZCU2APA1
- N5 Apps/Libs-N9200ZCU2APA1
- Multi-languag
- Full QMG/SPR/BMP support
-
- Alpha and Faster
- Rooted / Deodexed / Zipaligned / Busybox / Deknoxed
- Hispasian kernel Default, init.d and battery tweak
- Aroma with some Options
ROM Features
- N5 Accuweather
- N5 TouchWiz Home with Themes Support
- N5 Message App with floating message support
- N5 Settings With All S6 Lockscreen Effect
- N5 Keyboard
- N5 Health
- N5 Smart Manager
- N5 Gallery
- N5 Photo Editor
- N5 Email
- N5 Dialer and Contacts
- N3 Camera
- N5 SystemUI
- N5 My Files
- N5 Music With N5 Equalizer
- N5 Calculator
- N5 Calendar
- N5 Galaxy Apps
- N5 WallpaperPicker
- N5 S Browser
- N5 Smart Remote
- N5 Clock
- N5 S-PEN
- N5 Video App
- N5 Memo & SNOTE
- N5 Voice Recorder
- N5 S Voice
- N5 Theme Store
- N5 Theme Center
Advanced Power Menu
- More!!
1.. Rom Control integrated. Change functions like clock, battery, network signal, 2.launcher animation control, long click to kill, status bar colour, toolbox and many, many, many more.
3. Infinite launcher scrolling - thanks Also a huge thanks to the team for allowing us to use some of their files for last release
4. Smooth as butter. You will never find a smother rom
5. Moded SMS app. You get the original timestamp and you could write a very very long text without the fear of your carrier charging you.
6. Many setting item available as a separate settings menu. E.g. Autostart, reading mode, side key panel etc
7. Different level of animation made available for selection. 0, 0.25, to 1.0
8. Beautiful frames
6. Recent menu rounded for beautification
8. Sound control from power menu
9.speed meter left or right
10-battery choise 3minit or stock
11. CHANGE DPI
USSD works out of the box
12. All toggles enabled...more than you will ever need
13. High volume warning disabled
14. Data toggle warning disabled
15. Play with system files as you ever want...framework properly patched
16. Latest apps, google search, Play Store and many more
17. Ability to completely remove all google services and app and restore with a single click. NORMAsettings for more customisation
18. Stagefright Vulnerability
19. added launcher icon for easy access
added RAM Cleaner
added Launcher transition animations
added Hide apps from launcher
added sound options - enable/disable some system sounds
removed AdAway icon
added DPI changer - changes DPI right away
added Device Name Changer (build.prop device)
added Build.prop editor for advanced users
##########################################################################
HOW TO FLASH TWRP UNLOCKED BOOTLOADERS
Download the Rom from Download Link & put it on your device.
1..Boot to recovery and choose (for TWRP): Wipe --> Advanced Wipe --> Dalvik, System, Data and Cache. Then Swipe.
2..Now choose Install and search where you put the Rom.
3..Tap on it and swipe. Choose Unlocked Bootloader in aroma installer Wait until it install the Rom.
4..Reboot and wait that it complete the first boot: It takes around 12 minutes!
5..Enjoy the Rom.
##########################################################################
HOW TO FLASH FLASHFIRE LOCKED BOOTLOADERS
Download the Rom from Download Link & put it on your device.
1..Open FlashFire Choose Add Flash Zip or OTA
2..Now choose Install and search where you put the Rom.
3..Tap on it. Leave default box checked to mount system click the ok check mark at top
View attachment 3742264
4..Now Add A wipe and wipe system, 3rd party apps, Dalvik Cache, and Cache Partition
View attachment 3742265
5..Now move the wipe box by holding down on it and move it above the Flash Zip or OTA Box. THIS IS VERY IMPORTANT THE WIPE MUST BE DONE BEFORE THE ROM IS FLASHED OR YOU WILL GET SYSTEMUI FC!!!
View attachment 3742266View attachment 3742275View attachment 3742276View attachment 3742267
6..Now choose locked bootloader in aroma installer.
#############################################################################
If you like the rom and want to support all the work that the dev has done with it, please make a donation!
#############################################################################
DOWNLOADSNorma_Note5Port_V3.44_VZW.zip
#############################################################################
#############################################################################
ORIGINAL THREAD HERE
XDA:DevDB Information
ROM[Norma v3.1 G900X], ROM for the Samsung Galaxy S 5
Special Thanks
Contributors
nunofgrd, wellaflex, komarov27,Malbert16442
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: TW
Version Information
Status: Stable
Current Stable Version: 3
Stable Release Date: 2016-04-14
Created 2016-04-14
Last Updated 2016-04-14
To Get MMS Working Follow This Thread
Or you can flash this MMS_Fix.zip But it may not theme properly. After you flash you will have to goto Applications and clear data on Messages
THE BELOW ZIPS ONLY PERTAIN TO PEOPLE WITH LOCKED BOOTLOADERS
The locked bootloader install will install a different SecSettings.apk which will allow lockscreen swipe and disable from settings and also let you edit apns. You can still access rom control from the apps. If your running verizon sim and dont need access to apn editing then you can flash this zip which will put the Secsettings back in the rom, that has the autostart, app opps, led modding and a few other options but once flashed you can not edit apns you can add new ones but you can not edit existing ones. The swipe lockscreen and disable option should still work from settings apk
Settings_Fix_V3.3.zipAlso will work on V3.4
If your locked bootloader and need to wipe dalvik cache flash below zip right after you wipe and this will keep lockscreen working
LockScreen_FC_Fix_V3.3.zip
LockScreen_FC_Fix_V3.4.zip
Tengo el bootloader desbloqueado y se instala bien la rom pero solo inicia donde se configura el lenguage y luego se apaga y asi continua siempre
Installing this now, will leave feedback when done.
Thanks so much in advance for this, and everything that you do Jrkruse. As well as thanks to the developers~
Edit: Works great, looks great imo, and is a nice change of pace from the good ol' Alliance ROM.
Using for Locked Bootloaders btw. So far 10/10 experience.
Jrkruse you are the man one of the best developers out there! I'm about to flash this as I was on a Android M AOSP 6.0.1 rom but I actually miss Touchwiz especially for my Gear S Verizon hurry up with Android M already lol
For those with Locked Bootloader, Can Safestrap still work on this ROM? And If So....what Kernel would one flash to go back to ROM once done using Safestrap? Can you enlighten us more on what Kernel this ROM uses/needs and if the standalone kernel is Safestrap flashable?
I already understand that the ROM itself uses AROMA installer and will need FlashFire/TWRP to flash....I'm just curious about the Kernel and SafeStrap AFTER the ROM is up and running. In OP under "Features" it lists "Hispasian kernel Default"....I have no clue what that is or if that mention is just a Copy/Paste from the Original ROM and our special Verizon S5 port uses a different Kernel.
Future thanks for clarifying some of this for me (and others I think too).
Stupifier said:
In OP under "Features" it lists "Hispasian kernel Default"....I have no clue what that is or if that mention is just a Copy/Paste from the Original ROM and our special Verizon S5 port uses a different Kernel.
Click to expand...
Click to collapse
I believe that kernel part doesn't apply to locked bootloader users.
Stupifier said:
For those with Locked Bootloader, Can Safestrap still work on this ROM? And If So....what Kernel would one flash to go back to ROM once done using Safestrap? Can you enlighten us more on what Kernel this ROM uses/needs and if the standalone kernel is Safestrap flashable?
I already understand that the ROM itself uses AROMA installer and will need FlashFire/TWRP to flash....I'm just curious about the Kernel and SafeStrap AFTER the ROM is up and running. In OP under "Features" it lists "Hispasian kernel Default"....I have no clue what that is or if that mention is just a Copy/Paste from the Original ROM and our special Verizon S5 port uses a different Kernel.
Future thanks for clarifying some of this for me (and others I think too).
Click to expand...
Click to collapse
pyrite123 said:
I believe that kernel part doesn't apply to locked bootloader users.
Click to expand...
Click to collapse
Well....if I had to guess, Locked Bootloaders will still be using/running BP1 Firmware/Kernel. I just wanted confirmation on that.
Separate Issue:
Red Text in OP says "disable stock lockscreen by setting lockscreen type to none". Unfortunately, "None" is completely greyed out and it says "Turned off by administrator, encryption policy or credential storage". This is how it was from a fresh ROM flash of this. Please help
Very nice instructions, installer does have option to keep or wipe data, great option. Everything went super smooth. Jrkruse, you are the best of the best and we all appreciated to have you supporting our device. I dont think I will need another phone for the next 2,3 years!!!Again thank you, think you and think you. Will report back with performane and battery life.
Sent from my SM-P600 using Tapatalk
buhohitr said:
Very nice instructions, installer does have option to keep or wipe data, great option. Everything went super smooth. Jrkruse, you are the best of the best and we all appreciated to have you supporting our device. I dont think I will need another phone for the next 2,3 years!!!Again thank you, think you and think you. Will report back with performane and battery life.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Love this rom just sucks I had to downgrade to Lollipop from M to get my Gear S to work. Wish someone would port a TW Android M rom for our S5 but I guess we have to wait until Verizon releases it.... a tiny problem I have with the rom is the super dated Android security patch but I guess that's very minor
Anyone figure out how to truly disable the LockScreen though? That option seems greyed out. jrkruse says we have to disable the damn thing to install Xposed without getting FC's on locked bootloader.....but we can't even disable the thing. Can't install xposed without figuring this out.
Is there some sort of LockScreen Fix we need to Flash to disable lockscreen? I'm at a total loss here and really need xposed on this ROM if I'm gonna use it.
Any chance we can get a dump of the removed apks? Specifically looking for mirrorlink
RichyValents said:
Tengo el bootloader desbloqueado y se instala bien la rom pero solo inicia donde se configura el lenguage y luego se apaga y asi continua siempre
Click to expand...
Click to collapse
Please post in english, forum rules (Por favor amigo publica en inglés, son las reglas del foro)
@jrkruse thanks for your work, but im gettin the same issue, bootloop in the welcome and choose languaje screen... im in unlocked bl, i tried wiping dalvik and cache but still not working... any help?
i9192droid said:
Please post in english, forum rules (Por favor amigo publica en inglés, son las reglas del foro)
@jrkruse thanks for your work, but im gettin the same issue, bootloop in the welcome and choose languaje screen... im in unlocked bl, i tried wiping dalvik and cache but still not working... any help?
Click to expand...
Click to collapse
If it helps add any information, My phone also rebooted at the screen, but only once. After that, it was fine. I noticed this was repeatable behavior as well. For other reasons I had to re-install this ROM. Same thing happened on my 2nd install of the ROM. After that first reboot on the welcome screen, everything was good and I could continue.
Stupifier said:
If it helps add any information, My phone also rebooted at the screen, but only once. After that, it was fine. I noticed this was repeatable behavior as well. For other reasons I had to re-install this ROM. Same thing happened on my 2nd install of the ROM. After that first reboot on the welcome screen, everything was good and I could continue.
Click to expand...
Click to collapse
Did you get bootloop?
i9192droid said:
Did you get bootloop?
Click to expand...
Click to collapse
No, I did not....but like I said, my phone did reboot ONCE (just once) at the exact same screen you are getting a Bootloop on.
Stupifier said:
No, I did not....but like I said, my phone did reboot ONCE (just once) at the exact same screen you are getting a Bootloop on.
Click to expand...
Click to collapse
Ah ok... youre lucky
Sent from my SM-G900V using XDA-Developers mobile app
i9192droid said:
Ah ok... youre lucky
Sent from my SM-G900V using XDA-Developers mobile app
Click to expand...
Click to collapse
Not so sure it was luck either. I've installed this exact ROM 3 times now (been playing with stuff).......and see the exact same thing happen. Only reboots once at that Welcome screen each time I fresh install this ROM. Everything else is good.
I'm still struggling getting the damn LockScreen disabled lol
Stupifier said:
Not so sure it was luck either. I've installed this exact ROM 3 times now (been playing with stuff).......and see the exact same thing happen. Only reboots once at that Welcome screen. Everything else is good.
I'm still struggling getting the damn LockScreen disabled lol
Click to expand...
Click to collapse
At least you get bootloop once... in my phone is eternal [emoji22] i really want to test this rom...
Sent from my SM-G900V using XDA-Developers mobile app
Was interested in this rom and came across something interesting in the features list - it mentions the S-Pen Does this really have support for Sammy's Pen? If so, to what extent (i.e. partial or complete support)?
Hi Everybody!
I posted 2 roms Nougat 7.0 here :
Tizen V1 :
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336
Tizen V2 :
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-v2-0-nougat-h850-20a-eu-t3511845
Today, I shares my new rom to all of you. I hope you will enjoy with it
Preview V3 :
https://youtu.be/qi2_gXpzHfo
Preview V4 :
https://www.youtube.com/watch?v=ndQ-r7uLMz4&feature=youtu.be
Changelog
- Base rom H850 20C TLF Spain, build date 14.12.2016, security patch level date 01.12.2016
- Aroma Installer
- Debloat app System
- Added Rebooter
- Set Wallpaper LG V20
- Set Lockscreens LG 20
- Add Dobly option in music setting
- Add Home UX4, with add widget on Smart bulletin
- Add Google Caculator in LG V20 rom
- Add LGEmail.apk
- Add LGTask.apk
- Transperant widget on Home UX5, UX4
- Navigation bar 32 height
- Sync Navigation and Status bar color system apps
- Add Smart Doctor
- Rooted after flash rom
- Add Viper4Android 2.5.0.5
- Add ViperXHiFi 2.1.0.2
- Camera sound off
- Added MiniView LG V20
- Lockscreen 3 touch (defaut stock rom 6 touch)
- Added message button in Call log and Contacts
- More.....
OLD
V3.0 :
- Base rom H850 20b TIM ITALY, build date 23.11.2016
- Aroma Installer
- Debloat app System
- Added Rebooter
- Set Wallpaper LG V20
- Set Lockscreens LG 20
- Add Dobly option in music setting
- Add Home UX4, with add widget on Smart bulletin
- Add Google Caculator in LG V20 rom
- Add LGEmail.apk
- Add LGTask.apk
- Transperant widget on Home UX5, UX4
- Navigation bar 32 height
- Sync Navigation and Status bar color system apps
- Add Smart Doctor
- Rooted after flash rom
- Add Viper4Android 2.5.0.5
- Add ViperXHiFi 2.1.0.2
- Camera sound off
- More.....
INSTALLATION GUIDE
V4.0 :
- LGup for updated to Nougat 7.0
- Install TWRP Recovery 3.0.2.1 : TWRP (thanks @jcadduono)
- Download rom : https://drive.google.com/file/d/0B-OK6d3iTMmlOXpsZGVVZkhIUHM/view?usp=sharing
MD5 : c1f8e95c3ca505222d618bacb2ac5c48
- Copy to Internal storage or ext sdcard
- Enter to recovery
- full wipe (wipe system, data, cache, davik cache)
- Install rom and follow steps in aroma installer
- Reboot
- Setup and Enjoy
Old :
- V3.0 :
- LGup for updated to Nougat 7.0
- Install TWRP Recovery 3.0.2.1 : TWRP (thanks @jcadduono)
- Download rom :
MD5 : 0f789ad8d4d58f31dd85a7d36f0ca537
- Copy to Internal storage or ext sdcard
- Enter to recovery
- full wipe (wipe system, data, cache, davik cache)
- Install rom and follow steps in aroma installer
- Reboot
- Setup and Enjoy
Thanks :
- @jcadduono
- @superr for kitchen
- @xpirt for little code for miniview
- someone can't remember
Bonus : UI with power off screen (upper left), Screen capture (upper right) and center clock. Flash through recovery, no wipe : https://drive.google.com/file/d/0B-OK6d3iTMmleENCanhFQVRwSU0/view?usp=sharing
OLD :
- V3.0 :
Bonus : UI with power off screen (upper left), Screen capture (upper right) and center clock. Flash through recovery, no wipe :
https://drive.google.com/file/d/0Bxzxv3DgqkRbd3kyRjVrbF9xU3c/view?usp=sharing
Note :
- Sorry with my bad English
- I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
- Free for donate
- When open ViperXHiFi, notification will be showed "Root permission (su binary) required.". You just touch outside, it will work normally
Thanks All
Where is download link?
Pphish20 said:
Where is download link?
Click to expand...
Click to collapse
Look in Installation guide
cdanthien said:
Look in Installation guide
Click to expand...
Click to collapse
Sigh, how embarrassing... Promise I know what I'm doing and eager to test. I have an open EU variant no problems flashing with branded base?
It seems to work correctly
Just dirty-flashed over Tizen v2 (20a) and looking good so far First impressions are good on smoothness (scrolling for example seems smoother) but very early days, so thanks a lot for the update... Can't see any obvious signs of TIM branding, shows as V20b-EUR-XX for me and 1st November 2016 security patch level...
Noob question... Do you need to wipe anything when dirty flashing? Do you need to mount system in twrp /always wondered what is that for? / before dirty flashing. And of course.. . backup first.
Thanks
tomarin said:
Noob question... Do you need to wipe anything when dirty flashing? Do you need to mount system in twrp /always wondered what is that for? / before dirty flashing. And of course.. . backup first.
Thanks
Click to expand...
Click to collapse
I didn't (not even wipe of cache/dalvik after install) so a REALLY dirty flash in that case I didn't mount system either, simply flashed over the top of 20a (after taking over 4 hours to do a backup in TWRP - something seriously wrong there - must be a TWRP 3.0.2.1 / 7.0 issue as never seen TWRP that slow before)....
russtyd said:
I didn't (not even wipe of cache/dalvik after install) so a REALLY dirty flash in that case I didn't mount system either, simply flashed over the top of 20a (after taking over 4 hours to do a backup in TWRP - something seriously wrong there - must be a TWRP 3.0.2.1 / 7.0 issue as never seen TWRP that slow before)....
Click to expand...
Click to collapse
That's from dirty flash and not mounting system.
Full wipe (can always restore data later if you feel so inclined)
Reboot recovery
Flash 20b
Reboot recovery again
Boot system
Then restore data if impatient
Pphish20 said:
That's from dirty flash and not mounting system.
Click to expand...
Click to collapse
It wasn't - the 4 hour TWRP backup was done from a clean install of 20a before installing 20b so can't be anything to do with the subsequent dirty flash....
Thanks al lot for the ROM! Working perfect till now! Keep going and merry Christmas!
Disfruta tu vida con Android Nougat
russtyd said:
It wasn't - the 4 hour TWRP backup was done from a clean install of 20a before installing 20b so can't be anything to do with the subsequent dirty flash....
Click to expand...
Click to collapse
Sorry I misunderstood your statement...
Guys! Battery? It's okei?
Inviato dal mio LG-H850 utilizzando Tapatalk
Flashed this yesterday dirty over a stock V20a and it works like a charm.
About the battery need to wait some days and some charges to give an announce.
Thank you for this ROM
Best regards and merry christmas
mkpcxxl
cla94 said:
Guys! Battery? It's okei?
Inviato dal mio LG-H850 utilizzando Tapatalk
Click to expand...
Click to collapse
Been running for a couple of days and I would say that Deep Sleep is better (so loss overnight is now 5-6% instead of 10-15% under Deep Sleep conditions) - anything else will be down to how we each use the phone....
Also feels less laggy than 20a - under 20a there was a clear pause when selecting an app to launch, or scrolling menus - this is much snappier under 20b
No Battery problems. It seems even better
Disfruta tu vida con Android Nougat
No offense, but could you please not start a new topic each time you do a minor update on your Tizen ROM? All the dev section is full of your ROMs, this is like the third thread, is it really that hard to update the previous one or what?
Best rom!! Thanks
Enviado desde mi LG-H850 mediante Tapatalk
wow really nice ROM, just removed the LG-Bloat (Health,...) Great!!
@cdanthien
can share b&o wallpaper that you have in your preview youtube<?
[ROM][MidgarD V1.0] EMUI 5.1 Huawei Mate 10 Lite by Catuva21
ROM MORFUZ V 1.0 - EMUI 5.1. HUAWEI MATE 10 LITEKANGVIP RNE-B178-V2Aroma Installer
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
Hello with all, recently I bought this terminal RNE-L23C605, and made roms for a huawei P9 Lite, now I will make some for this great cell phone, well let's start:
COMPATIBLE WITH
L23C605-L03C605
L21C432-L01C432
L21C900-L01C900
L02C636-L22C636
AL00C00
L21C10
L21C33
L21C185
L01C55
L21C738
L22C569
L22C635
L22C675
L03C178
L02C346
REQUIREMENTS:
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows
DETAILS OF THE ROM
- base kangvip-RNE-v178-v2
- You can modify the number of icons in the notification panel mode and the navigation bar.
- highly modifiable, do not modify screen resolutions
- is based on the last update of L21C435B135 (security patch April)
- installation mode aroma installer
- Kernel TeamPhenom 1.0
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- Optimization for performance games, and battery.
- It eliminated unnecessary google applications.
- Facial unlocking for other compilation that does not yet have it.
- Sound with Huawei Histen effect
- VOLTE activated
INSTALLED APPLICATIONS
- Full Call Recorder
- Youtube Mod (function in the background)
- Musica huawei Crack
HIDDEN FUNCTIONS ACTIVATED
- added more applications of social networks of Twin cloning
- Multi User X5
INSTALLATION MODE:
if it is the first time you install the recovery twrp follow these steps:
-guard the rom in an external memory.
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press reboot
- Press recovery
- Press Not Install or slide
- Automatically restart in recovery stock
- again see Pulsar WIPE
- Press ADVANCE WIPE
- Mark only DATA
- Press REPAIR OR CHANGE FILE SYSTEM
- As you will see in the upper part, this is in EXT4 or MNC format, which is not adequate and we must change.
- press CHAGE FILE SYSTEM
- Press F2FS and slide, then back to the window of the wipes.
- Now we will perform a system cleaning.
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
if you already installed a rom be stock or custom rom follow these steps:
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
AROMA INSTALLER
with aroma installer can selection
stock kernel or TeamPhenom
types of fonts
the root that you like or without root
You can also add
applications: like solid explorer, hbef, kernel auditor, quick reboot.
dolby atmos and viper.
NEXT WORK ROM MORFUZ BASED ON KANGVIP
Source Codes:
GPLv1: https://github.com/catuva21/kernelRNE-EMUI5.1
Contributors:
CATUVA21
KangV & Team HRT for KangVIP framework
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C435B135 EMUI5.1
ROM Kernel: TeamPhenom
ROM Firmware Required: EMUI 5.1
Version Information:
Status: Stable
Created on: 2018-04-09
Last Updated on: 2018-04-09
Images
Download Links:
Morfuz 1.0
Recovery Twrp 3.1.1.0
my Blog link
Removed
if it is left without call and notification sounds, download, unzip and paste into the internal memory.
click link
give thanks and if you want to support the donations link is below
reservet2
Good rom @CATUVA21, but juste one question : is it normal not to have facial unlocking? I'm in l21c185
gmbengue said:
Good rom @CATUVA21, but juste one question : is it normal not to have facial unlocking? I'm in l21c185
Click to expand...
Click to collapse
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
CATUVA21 said:
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
Click to expand...
Click to collapse
Can't open system from solid explorer, and in twrp/file manager can't see version folder ! maybe something wrong with my installation. I do everything, one by one, like you say. but the rom is working.
Unable to instal magisk too
gmbengue said:
Can't open system from solid explorer, and in twrp/file manager can't see version folder ! maybe something wrong with my installation. I do everything, one by one, like you say. but the rom is working.
Unable to instal magisk too
Click to expand...
Click to collapse
Did u tried install Magisk Manager ?
TheSparta said:
Did u tried install Magisk Manager ?
Click to expand...
Click to collapse
Thanks Thesparta it's good
@CATUVA21 :good: Facial unlocking is here now and working well ! thanks for your job and the time you take for us !
just one thing (the last) when I plug earphone, the sound is low, even if I amplified it from viper4android. any idea?
gmbengue said:
Thanks Thesparta it's good
@CATUVA21 :good: Facial unlocking is here now and working well ! thanks for your job and the time you take for us !
just one thing (the last) when I plug earphone, the sound is low, even if I amplified it from viper4android. any idea?
Click to expand...
Click to collapse
I think that the local.prop solved my problem of sound, now it's good.
For the rom, some bugs : Emui Music is only in espagnol and chiness (I think), Mipop crash when longpress back key to kill app, and in motion control/pick up/wake up device can't be activated, doubletap2wake freeze the screen, you have to reboot
exept that, all is good. sorry for my bad english
Phone soft reboots when receiving a call.How can I fix it ?
my phone restart
my phone restart when receiving call
TheSparta said:
Phone soft reboots when receiving a call.How can I fix it ?
Click to expand...
Click to collapse
---------- Post added at 06:20 PM ---------- Previous post was at 06:10 PM ----------
dear bro @TheSparta followe this step
CATUVA21 said:
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
Click to expand...
Click to collapse
I'm using RNE-L22, I can't enter the K Advanced Setting, it just crash. Please help.
CATUVA21 said:
[ROM][MidgarD V1.0] EMUI 5.1 Huawei Mate 10 Lite by Catuva21
ROM MORFUZ V 1.0 - EMUI 5.1. HUAWEI MATE 10 LITEKANGVIP RNE-B178-V2Aroma Installer
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
Hello with all, recently I bought this terminal RNE-L23C605, and made roms for a huawei P9 Lite, now I will make some for this great cell phone, well let's start:
COMPATIBLE WITH
L23C605-L03C605
L21C432-L01C432
L21C900-L01C900
L02C636-L22C636
AL00C00
L21C10
L21C33
L21C185
L01C55
L21C738
L22C569
L22C635
L22C675
L03C178
L02C346
REQUIREMENTS:
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows
DETAILS OF THE ROM
- base kangvip-RNE-v178-v2
- You can modify the number of icons in the notification panel mode and the navigation bar.
- highly modifiable, do not modify screen resolutions
- is based on the last update of L21C435B135 (security patch April)
- installation mode aroma installer
- Kernel TeamPhenom 1.0
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- Optimization for performance games, and battery.
- It eliminated unnecessary google applications.
- Facial unlocking for other compilation that does not yet have it.
- Sound with Huawei Histen effect
- VOLTE activated
INSTALLED APPLICATIONS
- Full Call Recorder
- Youtube Mod (function in the background)
- Musica huawei Crack
HIDDEN FUNCTIONS ACTIVATED
- added more applications of social networks of Twin cloning
- Multi User X5
INSTALLATION MODE:
if it is the first time you install the recovery twrp follow these steps:
-guard the rom in an external memory.
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press reboot
- Press recovery
- Press Not Install or slide
- Automatically restart in recovery stock
- again see Pulsar WIPE
- Press ADVANCE WIPE
- Mark only DATA
- Press REPAIR OR CHANGE FILE SYSTEM
- As you will see in the upper part, this is in EXT4 or MNC format, which is not adequate and we must change.
- press CHAGE FILE SYSTEM
- Press F2FS and slide, then back to the window of the wipes.
- Now we will perform a system cleaning.
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
if you already installed a rom be stock or custom rom follow these steps:
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
AROMA INSTALLER
with aroma installer can selection
stock kernel or TeamPhenom
types of fonts
the root that you like or without root
You can also add
applications: like solid explorer, hbef, kernel auditor, quick reboot.
dolby atmos and viper.
NEXT WORK ROM MORFUZ BASED ON KANGVIP
Source Codes:
GPLv1: https://github.com/catuva21/kernelRNE-EMUI5.1
Contributors:
CATUVA21
KangV & Team HRT for KangVIP framework
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C435B135 EMUI5.1
ROM Kernel: TeamPhenom
ROM Firmware Required: EMUI 5.1
Version Information:
Status: Stable
Created on: 2018-04-09
Last Updated on: 2018-04-09
Images
Click to expand...
Click to collapse
4G not working on RNE-L22C636. How to fix ???
@catuVA2
Advanced settings do not work do you have an idea why it doesn't work ?
to L21C432
ok Advanced settings works with Magisk root
gmbengue said:
Thanks Thesparta it's good
@CATUVA21 :good: Facial unlocking is here now and working well ! thanks for your job and the time you take for us !
just one thing (the last) when I plug earphone, the sound is low, even if I amplified it from viper4android. any idea?
Click to expand...
Click to collapse
How did u manage to find facial unlock? I'm also on c185 and it seems like there's no such option
Edit:
After adding 'ro.config.face_recognition=true' to local.prop File in /system/emui/base/prop the option showed up in settings but i am unable to register my face, any idea?
smon3k said:
How did u manage to find facial unlock? I'm also on c185 and it seems like there's no such option
Edit:
After adding 'ro.config.face_recognition=true' to local.prop File in /system/emui/base/prop the option showed up in settings but i am unable to register my face, any idea?
Click to expand...
Click to collapse
CATUVA21 said:
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
Click to expand...
Click to collapse
use this method
Im not getting 4G signal. Im using rne-l22 how to fix?
4g on status bar not disappearing
Hi! Thanks for the great ROM.
4g symbol on status bar is not disappearing even when WiFi and mobile data are turned on.
How to fix this? Thanks
makelsevilla said:
Hi! Thanks for the great ROM.
4g symbol on status bar is not disappearing even when WiFi and mobile data are turned on.
How to fix this? Thanks
Click to expand...
Click to collapse
In the settings app, under mobile data there's that "More" button. In the menu that opens when you click that, open mobile network and then turn off "Mobile Data Always On" option. Do the same to the one in the developer options if that's also turned on. No need to turn off the second one if you didn't unlock developer options though.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V 3.6 - EMUI 8.0 RNE_E8_330_Kvip_V2DONOT COPY MY WORK, Ask for Permissions
Code:
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
with all versions, Mate 10 lite, remember to know your original compilation if at any time you want to return to stock for example RNE-LX3C25 with this data you can return to stock.
This version is based on the official EMUI modification made in the SIRIUZ rom combined with the work of Kangvip KangV & Team HRT for their best KangVIP framework, an Asian rom which was adapted for all European and Latin American versions.
REQUIREMENTS:
- EMUI 8.0.0
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
Guard the rom in an external memory.
Turn off the cell phone press the plus and power buttons until you have the TWRP window
Press WIPE
Press FORMAT DATA
Write the word "yes" without quotes and accept, just do the work
Press BACK to go back several times to the main window.
Press WIPE, then ADVANCE WIPE
Verify that the partition DATA this in the f2fs extension
Mark: Dalvik, cache, data, internal storage, system
IMPORTANT !: do not mark "micro sdcard".
Once you have marked, slide the "swipe to wipe" arrow to clear it.
Go back to the main sale, press INSTALL
Press SELECT STORAGE
Switch to Micro SDCard to find the rom.
Look for the MORFUZ rom and flash
At the end of the installation press "wipe davilk-cache", wait for it to finish.
Reboot system.
Congratulations now will start the rom MORFUZ
now compatible with magisk, if you want to have a magisk root, wait for the system to start normally, then download and flash the Kernel-Ramdisk.zip file by recovery twrp after starting, delete the supersu application.
https://mega.nz/#!5EBlWQDJ!5Sodz7OcUGHulZ7-4rcLW2OlK7sDHDoIC7h_66yX760
It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
-IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
https://mega.nz/#!s3oFgCIK!IFGxeV1UYEDjMGjFzdGR9N5Cx1bVVcqbk-XeRDmQj5Q
Rom Morfuz
https://mega.nz/#!tMpUnSYS!hgLDk0Hq4deAjJSJ9lHNRBdW_Zsx_3EFMv87s8eashw
TWRP Mod by catuva21 - VERSION 2
unzip, the file is automatic
https://mega.nz/#!uD4FlCqL!ERBzP4ZWa2sR8f_wnn15F_cOFCdYVKgfYETjiehQkkQ
TELEGRAM GROUP
https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg
Contributors:
CATUVA21
Credits:
- Openkirin Recovery TWRP
- KangV & Team HRT for their best KangVIP framework
- Alexxx1
- Chisetdel31260
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-06-02
DESCRIPTION ROM MORFUZ - KANGVIPDETAILS OF THE ROM
ROM MORFUZ 3.6
- Mate10 lite base firmware (August security patch).
- New base RNE.356GT.
- MorfuzKernel 2.1 selinux Permissive.
- Turbo GPU.
- Dual speaker activated.
- Added support init.d.
- Added busybox.
- Huawei ID back.
- Boot profile for the Darknnes-Blu_Active kernel within init.d improves performance.
- Change of the MTweaks auditor kernel application.
- Added Lent AR fun camera function.
- Magisk 16.0.
- Increase bitrate of photos and video, improve quality.
- Application of return mails.
- Youtube Mod Updated.
- Screenshot by sliding three fingers.
- New Gboard keyboard.
ROM MORFUZ 3.4
-Base firmware Mate 10 lite(security patch May).
-New kangvip base RNE_E8_330_Kvip_V2.
-Activated Dual Speaker.
-Added DolbyAtmos in Music.
-New Boot logo.
-Added custom watermark for the Mate 10 lite.
-Now without patches.
-Installation mode AROMA-INSTALLER.
-Music: stock or crack.
-Camera: stock, Mate10Pro or P20Pro.
-Root: Magisk or Supersu.
-Navbar, Use the fingerprint sensor as a navigation bar.
-Solid explorer, Kernel Auditor, Quick Reboot.
-MxPlayer.
-Sony Music.
ROM MORFUZ 2.0
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
Removed
Thank's for the rom @CATUVA21, I'll try it today.
Can you try to put viper4android in your next release ? No sound mod work with our emui 8 !
Bro can i install xposed framework in this rom? If no, Please make suport for it
i dnt get the additional sitting of the rom!
gmbengue said:
Thank's for the rom @CATUVA21, I'll try it today.
Can you try to put viper4android in your next release ? No sound mod work with our emui 8 !
Click to expand...
Click to collapse
it does not work viper nor dolby, I will improve the sounds in the next rom
Jackz1922 said:
Bro can i install xposed framework in this rom? If no, Please make suport for it
Click to expand...
Click to collapse
If I look for a compatible one
darckblis said:
i dnt get the additional sitting of the rom!
Click to expand...
Click to collapse
you are sure that you downloaded the morfuz rom, because also publish the rom siriuz
CATUVA21 said:
ROM MORFUZ V 2.0 - EMUI 8.0 KANGVIPHUAWEI MATE 10 LITEKANGVIP P10.342-V3DONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
- be in EMUI 8.0.0 Mate 10 Lite
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ
Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02
Images
Click to expand...
Click to collapse
Thank you so much. But i can't install Recovery, it said: Failed (remote: partition length get error). Can u help me?
how about 4g is it working in this rom?
Thank you
CATUVA21 said:
ROM MORFUZ V 2.0 - EMUI 8.0 KANGVIPHUAWEI MATE 10 LITEKANGVIP P10.342-V3DONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
- be in EMUI 8.0.0 Mate 10 Lite
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ
Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02
Images
Click to expand...
Click to collapse
Good afternoon, thank you very much for your contribution.
I had installed another room; but it did not appear the option to turn on the screen when receiving a message, and, they recommended the firmware with the L21C432 compilation, and, since I saw that catuva21 collaborated in its development, it installed it and everything works wonderfully.
Thank you very much.
The only thing is that I do not see the K settings, but I'm fine.
Greetings.
---------- Post added at 08:15 PM ---------- Previous post was at 08:02 PM ----------
CATUVA21 said:
ROM MORFUZ V 2.0 - EMUI 8.0 KANGVIPHUAWEI MATE 10 LITEKANGVIP P10.342-V3DONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
- be in EMUI 8.0.0 Mate 10 Lite
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ
Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02
Images
Click to expand...
Click to collapse
Question, with this firmware, can I install the stock recovery, and, close the bootloader?
Thank you.
huyle8795 said:
Thank you so much. But i can't install Recovery, it said: Failed (remote: partition length get error). Can u help me?
Click to expand...
Click to collapse
recovery stock or recovery twrp
flamedrops said:
how about 4g is it working in this rom?
Click to expand...
Click to collapse
if it works very well, but if you changed the brand (cust) probably not
gaduarte7 said:
Good afternoon, thank you very much for your contribution.
I had installed another room; but it did not appear the option to turn on the screen when receiving a message, and, they recommended the firmware with the L21C432 compilation, and, since I saw that catuva21 collaborated in its development, it installed it and everything works wonderfully.
Thank you very much.
The only thing is that I do not see the K settings, but I'm fine.
Greetings.
---------- Post added at 08:15 PM ---------- Previous post was at 08:02 PM ----------
Question, with this firmware, can I install the stock recovery, and, close the bootloader?
Thank you.
Click to expand...
Click to collapse
is a modified rom, I do not recommend closing the bootloader, only for stock roms
CATUVA21 said:
recovery stock or recovery twrp
Click to expand...
Click to collapse
RECOVERY TWRP Mod by catuva21. I can't install it. Before that, i installed Recover TWRP mod by KingOfMezi v 3.1.1-0. Thanks!!!!
CATUVA21 said:
is a modified rom, I do not recommend closing the bootloader, only for stock roms
Click to expand...
Click to collapse
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Grcias and happy day.
gaduarte7 said:
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Grcias and happy day.
Click to expand...
Click to collapse
Thanks for your contribution, it is true that the developers advise not to take certain steps because they have already been the same, and communicates to prevent others from making those mistakes.
Thxs for the rom, any solution for viper install?
Hi. @CATUVA21
When can we expect HWOTA8. And whether it will be possible to Downgrade Nougat.