Database Info

touch screen

Hi. I have unlocked, my phone sucsessfuly, S-off, h-boot, custom recovery. After restart my touch screen is unresposible for about 10 seconds. After that is O.K. but sometimes is the same thing. I can not unlock , because the ring is not moving. I changed my screen protector, Tryed without screen protector.Nothing helped. Should I flash stock Rom. Very weierd issue. BTW in CWM , when I try to flash custom rom is same thing, screen does not respond for about 3,4 seconds after that is O.K.

solutions...
invisiblebm said:
Hi. I have unlocked, my phone sucsessfuly, S-off, h-boot, custom recovery. After restart my touch screen is unresposible for about 10 seconds. After that is O.K. but sometimes is the same thing. I can not unlock , because the ring is not moving. I changed my screen protector, Tryed without screen protector.Nothing helped. Should I flash stock Rom. Very weierd issue. BTW in CWM , when I try to flash custom rom is same thing, screen does not respond for about 3,4 seconds after that is O.K.
Click to expand...
Click to collapse
Hi, first of all my friend, USE the search first.
Second, you can try the TouchScreen Booster 1.X from Market that help me resolve my touch issues.
third, if problem still exist, you can try to reflash again wipeing everithing.,cache,user,etc.
and last, don't forget to say thanks

matury said:
Hi, first of all my friend, USE the search first.
Second, you can try the TouchScreen Booster 1.X from Market that help me resolve my touch issues.
third, if problem still exist, you can try to reflash again wipeing everithing.,cache,user,etc.
and last, don't forget to say thanks
Click to expand...
Click to collapse
Off course I have searched. We have 3 months old baby and I dont have too much time to look around. Thanks added!

[Q] Only asus bootscreen, no recovery or boot - Is it Bricked?

Good evening all?
Ive unlocked my TF300T a year back and had been running Cyogenmod 10.1 on it for months, all worked fine.
As a recovery i had CWM installed and it worked like a charm as well.
A week ago i saw Cyogenmod 10.2 was out there and i wanted to switch the recovery to TWRP (i installed ver 2.6.x.x) and tried the new Cyogenmod.
It sisnt work so i wanted to switch back to 10.1 and CWM.
I dont exactly know what i did but in the end even the vol down and power button menu doesnt work anymore.
The tab turn on now and shows the Asus start screen but doesnt boot up.
Also when i press vol down and the power button it doesnt load the boot menu where i can install a new recovery and install the old Cyogenmod.
When its powered on i cant even turn of the tab, it keeps turning on for a few minutes in the Asus logo screen and than turn off and on again... till the battery is empty.
Did i brick my tablet ?
Are there any ways i can try to get the original software back?
Any help would be greatly appreciated.
Cheers !
Marty

Same situation with me....i think u have Hard Bricked your Tablet. The only option is Change the motherboard. So u need to send it to Asus..
Sent from my iris504Q using XDA Premium 4 mobile app

Did you update your bootloader to the JB one?

It IS Lupus said:
Did you update your bootloader to the JB one?
Click to expand...
Click to collapse
I think i didn't...
At first i just unlocked the device, installed recovery CWM and after a version (januari 2013) of Cyogenmod 10.1 wich was Android 4.2.2 and kept the Cyogenmod 10.1 up to date every few weeks... Thats all i did till i wanted to install Cyogenmod 10.2 (Android 4.3)
I can't recall updating the bootloader myself, could have been with an Asus update or something but i think i din't do it myself.

CM changed to the updated PITs when Asus updated first.
best solution would be to flash latest stock, boot into it once, flash twrp2 (2.6.0.0 works for me atm) then flash cm10.2
here is my summary
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
hope it helps
and no, i don't think you need to send it in for repair - it sounds more like broken PIT's so mount and boot points are not being recognized anymore.
gl
-Buster

Buster99 said:
CM changed to the updated PITs when Asus updated first.
best solution would be to flash latest stock, boot into it once, flash twrp2 (2.6.0.0 works for me atm) then flash cm10.2
here is my summary
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
hope it helps
and no, i don't think you need to send it in for repair - it sounds more like broken PIT's so mount and boot points are not being recognized anymore.
gl
-Buster
Click to expand...
Click to collapse
Thanks for your reply, how do i get to give fastboot commands when starting with volume down + power doesn't work anymore.
The only thing i have left is volume up + power to boor into APX mode and i cant seem to get the right usb driver for the TF300T
Cheers !

Tablet gets stuck on boot animation
I have a rooted asus tf300t and it will turn on but not get past the boot animation. I have tried to reset it using the bootloader but it will still not work. if anyone has any suggestions, i would like to hear them. i am a complete noob so please try to keep it simple. thanks

Tablet gets stuck on boot animation
I have a rooted asus tf300t and it will turn on but not get past the boot animation. I have tried to reset it using the bootloader but it will still not work. if anyone has any suggestions, i would like to hear them. i am a complete noob so please try to keep it simple. thanks

geronphillips said:
I have a rooted asus tf300t and it will turn on but not get past the boot animation. I have tried to reset it using the bootloader but it will still not work. if anyone has any suggestions, i would like to hear them. i am a complete noob so please try to keep it simple. thanks
Click to expand...
Click to collapse
More details will be needed before someone can help. What had you done right before it acted up? What rom do you have in there ATM? Can you post a picture or tell what's on the initial screen (the one before the boot animation)? Did you try volume down + power? If you did, what did the screen show?

graphdarnell said:
More details will be needed before someone can help. What had you done right before it acted up? What rom do you have in there ATM? Can you post a picture or tell what's on the initial screen (the one before the boot animation)? Did you try volume down + power? If you did, what did the screen show?
Click to expand...
Click to collapse
I rooted my device using the method shown on this page
http://forum.xda-developers.com/showthread.php?t=2228613I
, the ROM is stock and the screen before the animation is normal (white Asus text). I have tried volume down and power and from that screen, I reset my tablet. This didn't solve the issue, before this started, I changed the boot animation and changed fonts. I think it was while restarting after the font change that it stopped booting properly.

geronphillips said:
I rooted my device using the method shown on this page
http://forum.xda-developers.com/showthread.php?t=2228613I
, the ROM is stock and the screen before the animation is normal (white Asus text). I have tried volume down and power and from that screen, I reset my tablet. This didn't solve the issue, before this started, I changed the boot animation and changed fonts. I think it was while restarting after the font change that it stopped booting properly.
Click to expand...
Click to collapse
I gather by "reset my tablet", you meant you cold booted it by selecting the android icon. This being the case, you can always reflash the stock ROM with fastboot. Depending on whether you had 4.1 or 4.2 bootloader - 4.1 has 4 icons including a USB icon which if clicked, will make the tab enter fastboot/download mode; 4.2 will enter that mode automatically as you press volume down+power - you need to choose the right ROM you want to install. The initial screen should tell you which bootloader on the top left corner. 4.1 matches stock Roms commencing with 10.4.x.xx; 4.2 is Roms with 10.6.x.xx
I've flashed a 4.1 ROM (104220) on a tab with 4.2 bootloader by means of an external SD card without problems. However, to be safe, you should flash whatever version you'd had before the incident. If you already have data on the tab that you care to keep, you shouldn't touch the wipe date icon. If you need a link as to what to do, read this one. Good luck.

My OPO turn on but blank screen :(

Hi all
My OPO get black (blank) screen but its turn on and menu key is light and notefction led also but no screen
Any one help my ?

Are you able to boot into fastboot mode?

i think this but no (fast boot) word in screen ... just black with small light
i already flashed to cm 11 but same problem

up

Follow this guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732

ryanmat said:
Follow this guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
my phone not brick can i use this guide . i flashed new rom already but the problem cant solved

Ahmed Eldeknawy said:
my phone not brick can i use this guide . i flashed new rom already but the problem cant solved
Click to expand...
Click to collapse
You said you can't into fastboot, and all that shows up is a black screen, right? How were you able to flash a ROM? Are you able to get into recovery?

My dear
My phone is work but screen is black light . that is all

Honor 8 screen upside down and reversed

Hello everyone!
I dont know if someone already posted this thread, but I'm a bit desperate now. Here is my problem.
A few days ago I was sliding through Facebook, when my phone screen just turned upside down and backwards.
1) Restarted the phone - NOTHING.
2) Rooted and tried to modify a line in system folder (rotation) that everyone said would solve the problem, but the line doesn't eve exist.
3) Factory reset and flashed stock firmware- NOTHING.
4) Tried updating screen firmware through MMI/USSD code, but phone refuses to execute codes.
Rtl layout is not on just so we're clear.
Screenshot is normal. The controls are the same, but the picture is upside down, so I would'nt say it's a hardware problem.
Any suggestions before I replace the damn screen?
Picture link below.
https://imgur.com/JWuTMrX

https://imgur.com/JWuTMrX

That is kind of weird, unfortunately I have nothing to advice that you didn't perform previously , I think the best thing to do is to send it to customer service :/
In my opinion it is a software issue and changing the screen won't resolve it

Weird.

Is it revered in fastboot or recovery too?
This would highlight if it's a screen issue or ROM software...

lgrubisic2 said:
https://imgur.com/JWuTMrX
Click to expand...
Click to collapse
Boot logo, recovery or fastboot also reversed??

linkazoid said:
Is it revered in fastboot or recovery too?
This would highlight if it's a screen issue or ROM software...
Click to expand...
Click to collapse
It's reversed in recovery mode, but not fastboot. So weird

hassanjavaid8181 said:
Boot logo, recovery or fastboot also reversed??
Click to expand...
Click to collapse
It's reversed in recovery mode, but not fastboot.

lgrubisic2 said:
It's reversed in recovery mode, but not fastboot.
Click to expand...
Click to collapse
Give it a try flashing another firmware via dload... May that could help..

Ok, we have a brealthrough! I flashed a few new firmwares, and when I flashed the last one the picture went to normal orientation, but now the screen is flickering and blinking and going bananas.

lgrubisic2 said:
Ok, we have a brealthrough! I flashed a few new firmwares, and when I flashed the last one the picture went to normal orientation, but now the screen is flickering and blinking and going bananas.
Click to expand...
Click to collapse
LOL.. those are really strange issues.. :laugh:
Downgrade your phone to marshmellow.. Try flashing marshmallow firmware.. If it went back to normal upgrade to nougat via OTA.

Holy crap it's back to normal. I went to developer options and disabled HW overlay. Apparently CPU and GPU were ''fighting'' over who's going to control the screen. So for anyone who has the same issue as me, and none of the solutions I mentioned in the first post help- flash stock firmaware/firmwares, and if the problem persists, disable HW overlay. Thanks a lot guys
EDIT - Oh and flashing firmware via dload worked like a charm. Thanks hassanjavaid8181

lgrubisic2 said:
Holy crap it's back to normal. I went to developer options and disabled HW overlay. Apparently CPU and GPU were ''fighting'' over who's going to control the screen. So for anyone who has the same issue as me, and none of the solutions I mentioned in the first post help- flash stock firmaware/firmwares, and if the problem persists, disable HW overlay. Thanks a lot guys
EDIT - Oh and flashing firmware via dload worked like a charm. Thanks hassanjavaid8181
Click to expand...
Click to collapse
Good to hear..enjoy

Smartisan R1 Finally Rooted !

Smartisan R1 Finally Rooted !

Could you share how you managed to get it work ? and does it effect OTA updates ?

D.Spirit said:
Could you share how you managed to get it work ? and does it effect OTA updates ?
Click to expand...
Click to collapse
Yes I will write a guide soon. You loose fastboot after OTA, what I do is unpack OTA files and flash from fastboot without touching bootloader, then it's ok.

os_man said:
Smartisan R1 Finally Rooted !
Click to expand...
Click to collapse
so cool! I also want to root, I hope to get a tutorial. My system version is v6.6.6.3_TNT

os_man said:
Yes I will write a guide soon. You loose fastboot after OTA, what I do is unpack OTA files and flash from fastboot without touching bootloader, then it's ok.
Click to expand...
Click to collapse
please instructions

evelinanevinnaya said:
please instructions
Click to expand...
Click to collapse
https://bbs.mokeedev.com/t/topic/13653

Any help on U3
os_man said:
Yes I will write a guide soon. You loose fastboot after OTA, what I do is unpack OTA files and flash from fastboot without touching bootloader, then it's ok.
Click to expand...
Click to collapse
I have a Smartisan Nut3(aka u3) and have not been able to use it in months! Because unfortunately I can't bypass lockscreen, and recovery menu ( by holding vol dwn + power at startup) has no factory reset option! Only: reboot, reboot to bootloader ( Which only restarts phone to lockscreen), Apply update from ADB( tried using but USB debugging is lock I assume etc or I could be doing it incorrectly to bypass lockscreen or factory resetting it), apply update from SD card ( also tried but when I put card in I can't locate it. And when I go this menu without a SD in phone it still displays this long file list as if theirs a SD card in it. It always shows same files.), Wipe cache partition, shutdown.
And I've done all the YouTube methods to bypass lockscreen etc. I would love to get this phone working. It has become a constant ache, one of those little tech problems that's become to fully test me, beating me. Any help would be greatly appreciated thank you.

TechBoss509 said:
I have a Smartisan Nut3(aka u3) and have not been able to use it in months! Because unfortunately I can't bypass lockscreen, and recovery menu ( by holding vol dwn + power at startup) has no factory reset option! Only: reboot, reboot to bootloader ( Which only restarts phone to lockscreen), Apply update from ADB( tried using but USB debugging is lock I assume etc or I could be doing it incorrectly to bypass lockscreen or factory resetting it), apply update from SD card ( also tried but when I put card in I can't locate it. And when I go this menu without a SD in phone it still displays this long file list as if theirs a SD card in it. It always shows same files.), Wipe cache partition, shutdown.
And I've done all the YouTube methods to bypass lockscreen etc. I would love to get this phone working. It has become a constant ache, one of those little tech problems that's become to fully test me, beating me. Any help would be greatly appreciated thank you.
Click to expand...
Click to collapse
Soory didn't see this message, did you fixed it?

Help
os_man said:
Soory didn't see this message, did you fixed it?
Click to expand...
Click to collapse
Unfortunately I still have not been able to. I have put so much time into researching and trying everything.
If theirs any advice or options you can tell me to either factory reset it or bypass the lockscreen pattern or whatever i can do to be able to use it would be beyond appreciated because i haven't even been successful? with someone else trying to. So please HELP ME PLEASEEEE?

TechBoss509 said:
Unfortunately I still have not been able to. I have put so much time into researching and trying everything.
If theirs any advice or options you can tell me to either factory reset it or bypass the lockscreen pattern or whatever i can do to be able to use it would be beyond appreciated because i haven't even been successful with someone else trying to. So please HELP ME PLEASEEEE
Click to expand...
Click to collapse
You just need factory from (Qfil from), all Smartisans have it, you can probably google and find it. If you can't, let me know ([email protected])

os_man said:
Smartisan R1 Finally Rooted !
Click to expand...
Click to collapse
how to get fastboot, i try combo key but not working

os_man said:
Smartisan R1 Finally Rooted !
Click to expand...
Click to collapse
can you sent firmware smartisan r1, my phone stuck fastboot

whynot4444 said:
can you sent firmware smartisan r1, my phone stuck fastboot
Click to expand...
Click to collapse
坚果手机 R1 魔趣刷入教程 (MK81/MK90)
注意: 这是 MK81.0/MK90.0 的旧版教程，已过时，不适用于 MK100。如果需要刷入基于 Android 10 的 MK100，请移步：坚果手机 R1 魔趣刷入教程 (MK100) 写在前面 该手机的厂商不提供刷机保修，意味着刷机后你将失去保修资格，且需要自己承担失手造成故障的风险； 该手机首次刷机需要特殊的工具和极强的动手能力，请先充分阅读本帖再决定是否继续刷机； 魔趣是原生系统，不包含（也不会加入）一步、大爆炸、TNT 等 Smartisan OS 特色功能；该手机解锁后无法使用微信指纹支付。如果你离不开他们，不建议你尝试魔趣；...
bbs.mokeedev.com