Hi all
My OPO get black (blank) screen but its turn on and menu key is light and notefction led also but no screen
Any one help my ?
Are you able to boot into fastboot mode?
i think this but no (fast boot) word in screen ... just black with small light
i already flashed to cm 11 but same problem
up
Follow this guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
ryanmat said:
Follow this guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
my phone not brick can i use this guide . i flashed new rom already but the problem cant solved
Ahmed Eldeknawy said:
my phone not brick can i use this guide . i flashed new rom already but the problem cant solved
Click to expand...
Click to collapse
You said you can't into fastboot, and all that shows up is a black screen, right? How were you able to flash a ROM? Are you able to get into recovery?
My dear
My phone is work but screen is black light . that is all
Related
Hi Guys,
I have a Nexus S EU version I9023 and I wanted to get ICS. I flashed the 128 mb ICS image manually through fastboot recovery, however, I wanted to go back and try to flash it again or flash 2.3.6 on the phone again but it's not working.
It's going into fastboot and I can choose what I want from the menu but when I choose Recovery, it shows the Google screen, Flashes the Android with a little "Matrix" ball in front of it and then it freezes at a black screen, with the soft buttons lit up.
Could anyone tell me what happened and if it can be fixed?
PS: When I press VolumeUp+Power at the black screen, it resets!
kamikaze666 said:
Hi Guys,
I have a Nexus S EU version I9023 and I wanted to get ICS. I flashed the 128 mb ICS image manually through fastboot recovery, however, I wanted to go back and try to flash it again or flash 2.3.6 on the phone again but it's not working.
It's going into fastboot and I can choose what I want from the menu but when I choose Recovery, it shows the Google screen, Flashes the Android with a little "Matrix" ball in front of it and then it freezes at a black screen, with the soft buttons lit up.
Could anyone tell me what happened and if it can be fixed?
PS: When I press VolumeUp+Power at the black screen, it resets!
Click to expand...
Click to collapse
I think the phone is booting into stock recovery instead of clockworkmod
I am having the same issue, when i have to go into recoevery, i have to open the command prompt and type in
fastboot boot recovery-image-file.img
Click to expand...
Click to collapse
each time i need to flash something. Its a pain
I m running ICS on Nexus S i9023.
Does anyone have a solution to this problem ?
Ibn Saeed said:
I think the phone is booting into stock recovery instead of clockworkmod
I am having the same issue, when i have to go into recoevery, i have to open the command prompt and type in
each time i need to flash something. Its a pain
I m running ICS on Nexus S i9023.
Does anyone have a solution to this problem ?
Click to expand...
Click to collapse
Thing is, I don't have clockworkmod installed at all. It's a clean Nexus S, NO root, NO CWM, no nothing.
I truly hope that somebody will have an answer to this or that, at least, I won't loose any OTA updates from Google by making this update.
The stock ics recovery turns off the backlight on the 9023, it has been explained countless times. Point a flashlight at it and u should be able to see what's actually there.
Harbb said:
The stock ics recovery turns off the backlight on the 9023, it has been explained countless times. Point a flashlight at it and u should be able to see what's actually there.
Click to expand...
Click to collapse
Exactly. I've had the same problem than OP and fixed it today. Just use a very bright lamp, try to find a good angle and you may see the recovery menu (it's hard to see, you'd better be comfortable with the navigation on the recovery menu as you may not be able to read everything).
it depends what you want to do from here on. the bright light method did not work for me so i installed cwmrecovery with bootloader.
if u are waiting for the next ota, do nothing as you wont need stock recovery to install update.
if you wanna downgrade or flash different rom, you can install cwmrecovery and use that from thr..
no need to access stock recovery
i panicked as well when it happened but ntg to worry about
Bls440 said:
Exactly. I've had the same problem than OP and fixed it today. Just use a very bright lamp, try to find a good angle and you may see the recovery menu (it's hard to see, you'd better be comfortable with the navigation on the recovery menu as you may not be able to read everything).
Click to expand...
Click to collapse
Harbb said:
The stock ics recovery turns off the backlight on the 9023, it has been explained countless times. Point a flashlight at it and u should be able to see what's actually there.
Click to expand...
Click to collapse
cspader said:
it depends what you want to do from here on. the bright light method did not work for me so i installed cwmrecovery with bootloader.
if u are waiting for the next ota, do nothing as you wont need stock recovery to install update.
if you wanna downgrade or flash different rom, you can install cwmrecovery and use that from thr..
no need to access stock recovery
i panicked as well when it happened but ntg to worry about
Click to expand...
Click to collapse
Guys,
Thank you VERY MUCH for your prompt responses !!! I tried with a bright light and YES, everything is there, I just need to make sure that the angle of the light is right !!!
I can't thank you enough guys and I hope that this thread will help others as well !!!
Thank you once more !
I have the same problem on a I9020. I tried with the bright light, and the screen is blank. What should I do?
I apologise first if i posted this in the wrong section.
Ok , here is my issue, i currently have a huawei honor and rooted it.
Now when i turn on my phone, it get stuck at the logo page.
I tried doing the volume up and down + power up button, it enter a pink screen page.
I also tried putting the usb cable when my phone is in the pink screen page, but it can't read my memory card. help me any1?
no 1 can help me with it?
yojunhao said:
no 1 can help me with it?
Click to expand...
Click to collapse
here you will find everything you need bro...happy new year
Yea i check, i just need some guidance. Cause i managed to reset my phone dling the stock rom for my phone model and tried reapplying the font. And it caused me to bootloop again
yojunhao said:
Yea i check, i just need some guidance. Cause i managed to reset my phone dling the stock rom for my phone model and tried reapplying the font. And it caused me to bootloop again
Click to expand...
Click to collapse
PINK screen wont work until u have B919 installed
Guys i hard bricked my opo i can't even enter in fastboot or recovery.. I flashed color os kitkat version over the cm11s but i didn't like that so i did a wipe nd restored my backup of cm11s but cm11s was giving me some problems thn I flashed color os 1.2 custom rom thn voila it got bricked.. please help guys..
try to hold power button for 10 seconds and then go for recovery if its opening or fastboot.
OR ELSE
Use warranty
They will charge me for it??
DivyeshMehta10 said:
try to hold power button for 10 seconds and then go for recovery if its opening or fastboot.
OR ELSE
Use warranty
Click to expand...
Click to collapse
They will charge me for it??
There is a post somewhere on here that tells you how to go from ColorOS to CM11s..
I had some problems also.. I went from CM11s to ColorOS back to CM11s and got reboots and FCs...
You need to manually reflash all the files through fastboot and not through recovery... after I did that, worked no problem...
gd6noob said:
There is a post somewhere on here that tells you how to go from ColorOS to CM11s..
I had some problems also.. I went from CM11s to ColorOS back to CM11s and got reboots and FCs...
You need to manually reflash all the files through fastboot and not through recovery... after I did that, worked no problem...
Click to expand...
Click to collapse
But i can't go in fastboot mode so how can i use adb?
tufail.budoo said:
Guys i hard bricked my opo i can't even enter in fastboot or recovery.. I flashed color os kitkat version over the cm11s but i didn't like that so i did a wipe nd restored my backup of cm11s but cm11s was giving me some problems thn I flashed color os 1.2 custom rom thn voila it got bricked.. please help guys..
Click to expand...
Click to collapse
have gone through a full hard brick where I couldnt even boot into anything (even fastboot!). this guide saved my oneplus one
follow it and your good to go
NOTE: this is for a complete full hard brick.. you wouldn't see anything at all jst on the screen when you try to boot it. jst a small vibration and jst nothing on display.
Wrong kernel : black screen, no fastboot, no adb, no factory reset
linezero said:
have gone through a full hard brick where I couldnt even boot into anything (even fastboot!). this guide saved my oneplus one
follow it and your good to go
NOTE: this is for a complete full hard brick.. you wouldn't see anything at all jst on the screen when you try to boot it. jst a small vibration and jst nothing on display.
Wrong kernel : black screen, no fastboot, no adb, no factory reset
Click to expand...
Click to collapse
yes u r right bro same here.. no fastboot nothing just black screen.. it was giving me small vibration till now but now it's not giving that too..
tufail.budoo said:
yes u r right bro same here.. no fastboot nothing just black screen.. it was giving me small vibration till now but now it's not giving that too..
Click to expand...
Click to collapse
maybe you ran out of battery...put it on charge for a while and go with the steps on that link. hopefully you will make it to the shore post your troubles here and i'll try my best to help you out
What was your remaining battery when you were flashing?
linezero said:
maybe you ran out of battery...put it on charge for a while and go with the steps on that link. hopefully you will make it to the shore post your troubles here and i'll try my best to help you out
Click to expand...
Click to collapse
maybe but when i try to plug it in charger it does nothing not a single vibration..
tufail.budoo said:
maybe but when i try to plug it in charger it does nothing not a single vibration..
Click to expand...
Click to collapse
maybe keep it for a while? and also try to boot into fastboot mode just by holding the vol up+ and power button while connected to the pc to check if it installs any Qualcomm drivers. and yeah u wont see anything on ur phone display again.
CafeKampuchia said:
What was your remaining battery when you were flashing?
Click to expand...
Click to collapse
I bricked my opo 2 days before nd while flashing i had 58%..
linezero said:
maybe keep it for a while? and also try to boot into fastboot mode just by holding the vol up+ and power button while connected to the pc to check if it installs any Qualcomm drivers. and yeah u wont see anything on ur phone display again.
Click to expand...
Click to collapse
Ok i will keep it for a while... nd btw m using win7
tufail.budoo said:
Ok i will keep it for a while... nd btw m using win7
Click to expand...
Click to collapse
that makes it easier so its good
Charge the device for a while and then try this:
http://forum.xda-developers.com/showthread.php?t=2991851
timmaaa said:
Charge the device for a while and then try this:
http://forum.xda-developers.com/showthread.php?t=2991851
Click to expand...
Click to collapse
I kept my device on charge for about 1 hour but it does'nt give vibration feed back when trying to boot it or even trying to get in fastboot mode..
tufail.budoo said:
I kept my device on charge for about 1 hour but it does'nt give vibration feed back when trying to boot it or even trying to get in fastboot mode..
Click to expand...
Click to collapse
Never mind what it's currently doing, did you follow the instructions in that thread?
Transmitted via Bacon
timmaaa said:
Charge the device for a while and then try this:
http://forum.xda-developers.com/showthread.php?t=2991851
Click to expand...
Click to collapse
I kept my device on charge for about 1 hour but it does'nt give vibration feed back when trying to boot it or even trying to get in fastboot mode.. it was giving before
timmaaa said:
Never mind what it's currently doing, did you follow the instructions in that thread?
Transmitted via Bacon
Click to expand...
Click to collapse
i cant open that download link.. its showing error
i was trying to unlock bootloader using fastboot commands but unfortunately doing before so, I didn't approve usb debugging and didn't make the factory reset. now it showed the unlocking is done but ended with bootlooop failure. I tried to flash the stock ftf using flash tool, but it is also ending up with bootloop... what should i do now?
coolmmk07 said:
i was trying to unlock bootloader using fastboot commands but unfortunately doing before so, I didn't approve usb debugging and didn't make the factory reset. now it showed the unlocking is done but ended with bootlooop failure. I tried to flash the stock ftf using flash tool, but it is also ending up with bootloop... what should i do now?
Click to expand...
Click to collapse
bro its probably not a bootloop .
After you flash the stock ftf wait for it ,it will take some time to loads up JUST WAIT
n78 shadow said:
bro its probably not a bootloop .
After you flash the stock ftf wait for it ,it will take some time to loads up JUST WAIT
Click to expand...
Click to collapse
I waited for half an hour. Still it was showing boot animation
coolmmk07 said:
I waited for half an hour. Still it was showing boot animation
Click to expand...
Click to collapse
Download PC Companion
Go to Support zone click start
Go to Phone/Tablet Software Update click start
Click Repair my phone/tablet before click the connect button
Click continue
Check the box then click next
Find your phone
And follow the steps it tells you
This is the way i fix my Xperia l from bootloop ..
coolmmk07 said:
I waited for half an hour. Still it was showing boot animation
Click to expand...
Click to collapse
Use this guide here for installing CM12 and try if it will boot
http://forum.xda-developers.com/showpost.php?p=63769485&postcount=2
Make sure that your bootloader is unlocked
iam terrible upset that i could not login in resurrection remix forum ,,no validating email mail received,,so iam posting here
Xperial L
Resurrection-Remix-LP-v5.5.9-20151122-taoshan
Gapps gapps-L-4-21-15
This is the first timer...everything done and said as per the tutorials,,,Unlocked bootloader as per sony website..No red colored errors as such ..My xperia l does not boot into the rom it shows purple light & sony logo and goes blank then again the phone vibrates & logo comes with purple light led and boots into recovery cyanogen mod,,,,however when i just power it down and switch off and put it to charging it shows the battery icon and charging happens,,,
iam unable to understand the logs and dont know where to find them to post,,,iam freelancer and losing work as i took this risk to change rom,,coz xperia l was just hanging every now and then
i tried 2 other roms ( Primexperia, CM12 ) every time i get reed colored errors ( Incompatibility issues perhaps )
I need help urgently ,,i know the rom has been installed with gapps but,,something is wrong,,,the local mobile repair shop said maybe the side panel where the volume keys are located are damaged so it keeps booting in recovery ( the plastic keys have come off the phone )
he says he replaced and repaired it but still the same thing happens ,,i want RR to start...
help please
Hello everyone!
I dont know if someone already posted this thread, but I'm a bit desperate now. Here is my problem.
A few days ago I was sliding through Facebook, when my phone screen just turned upside down and backwards.
1) Restarted the phone - NOTHING.
2) Rooted and tried to modify a line in system folder (rotation) that everyone said would solve the problem, but the line doesn't eve exist.
3) Factory reset and flashed stock firmware- NOTHING.
4) Tried updating screen firmware through MMI/USSD code, but phone refuses to execute codes.
Rtl layout is not on just so we're clear.
Screenshot is normal. The controls are the same, but the picture is upside down, so I would'nt say it's a hardware problem.
Any suggestions before I replace the damn screen?
Picture link below.
https://imgur.com/JWuTMrX
https://imgur.com/JWuTMrX
That is kind of weird, unfortunately I have nothing to advice that you didn't perform previously , I think the best thing to do is to send it to customer service :/
In my opinion it is a software issue and changing the screen won't resolve it
Weird.
Is it revered in fastboot or recovery too?
This would highlight if it's a screen issue or ROM software...
lgrubisic2 said:
https://imgur.com/JWuTMrX
Click to expand...
Click to collapse
Boot logo, recovery or fastboot also reversed??
linkazoid said:
Is it revered in fastboot or recovery too?
This would highlight if it's a screen issue or ROM software...
Click to expand...
Click to collapse
It's reversed in recovery mode, but not fastboot. So weird
hassanjavaid8181 said:
Boot logo, recovery or fastboot also reversed??
Click to expand...
Click to collapse
It's reversed in recovery mode, but not fastboot.
lgrubisic2 said:
It's reversed in recovery mode, but not fastboot.
Click to expand...
Click to collapse
Give it a try flashing another firmware via dload... May that could help..
Ok, we have a brealthrough! I flashed a few new firmwares, and when I flashed the last one the picture went to normal orientation, but now the screen is flickering and blinking and going bananas.
lgrubisic2 said:
Ok, we have a brealthrough! I flashed a few new firmwares, and when I flashed the last one the picture went to normal orientation, but now the screen is flickering and blinking and going bananas.
Click to expand...
Click to collapse
LOL.. those are really strange issues.. :laugh:
Downgrade your phone to marshmellow.. Try flashing marshmallow firmware.. If it went back to normal upgrade to nougat via OTA.
Holy crap it's back to normal. I went to developer options and disabled HW overlay. Apparently CPU and GPU were ''fighting'' over who's going to control the screen. So for anyone who has the same issue as me, and none of the solutions I mentioned in the first post help- flash stock firmaware/firmwares, and if the problem persists, disable HW overlay. Thanks a lot guys
EDIT - Oh and flashing firmware via dload worked like a charm. Thanks hassanjavaid8181
lgrubisic2 said:
Holy crap it's back to normal. I went to developer options and disabled HW overlay. Apparently CPU and GPU were ''fighting'' over who's going to control the screen. So for anyone who has the same issue as me, and none of the solutions I mentioned in the first post help- flash stock firmaware/firmwares, and if the problem persists, disable HW overlay. Thanks a lot guys
EDIT - Oh and flashing firmware via dload worked like a charm. Thanks hassanjavaid8181
Click to expand...
Click to collapse
Good to hear..enjoy