Help with my cell phone - General Questions and Answers

someone who can help my cell phone stays in bootloader and says the following:
Bootloader: Start Up Failed:
Your Device did not start up successfully.
Use the Software Repair Assistant on Computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table USB connected
ERROR: No bootimage found. Skip to fastboot
Boot a failed
ERROR: No bootimage found. Skip to fastboot
Boot up failed
USB disconnected
ERROR: No bootimage found. Skip to fastboot
Boot up failed :llorando :llorando:
My cell phone is a Motorola Moto G4
Model: XT1621

EnriqueBernalMx said:
someone who can help my cell phone stays in bootloader and says the following... My cell phone is a Motorola Moto G4, Model: XT1621 ...
Click to expand...
Click to collapse
I don't have this device but, I believe that the following, device specific, thread may be helpful for what you need and don't be afraid to ask for some member guidance within it too.
https://forum.xda-developers.com/showthread.php?t=3657761
If all else fails, and you don't receive any responses from the above thread, you can always try to obtain some member guidance within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3526598
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Related

[Completed] [Q] Fastboot doesn't recognize moto g 4g on linux

I have a Moto G 4g. ADB recognizes the cell and I can restart it in fastboot mode, but when I check in the terminal with:
Code:
fastboot devices
Nothing appears, and if I go on with
Code:
fastboot oem get_unlock_data
It gets stuck at
Code:
< waiting for device >
I tried as a user and as root on an Archlinux machine with android-udev rules as shown in the Archlinux wiki (sorry, i can't put the link). AP Fastboot fast boot menu shows that the cell is locked.
Hi,
You can try a different cable, or USB port on the pc...or even a different pc. Until fastboot devices detects your device, there's nothing you can do.
Reinstall drivers...and you are on the bootloader mode right?
If none of that helps, you can ask in your device section for help....
http://forum.xda-developers.com/moto-g/help
Good luck!
Hi
I've tried with a win 7 machine and i got fastboot working on my phone after installing the drivers. Now i'm able to do the thing i want to, but the problem still persist in linux, so i don't know if i close this thread or leave it open for someone who can solve this.
trichocereus said:
Hi
I've tried with a win 7 machine and i got fastboot working on my phone after installing the drivers. Now i'm able to do the thing i want to, but the problem still persist in linux, so i don't know if i close this thread or leave it open for someone who can solve this.
Click to expand...
Click to collapse
Please start one in your section. Xda Assist is here to help navigate the site, not for support.
Thanks!

Hard Bricked Asus ZE550KL!!!!!!!!!

Hello!!!!!!!!
I Had a lot of questions, help me to sort out such situations
I'd Bricked Asus ZE550KL recently, by flashing wrong emmc_appsboot.bin
Phone Info:
Brand & Model: Asus Zenfone 2 Laser Ze550KL
Ram & Rom: 2G, 16G
Processor & Board: Snapdragon 410 1.2ghz, MSM8916
The Problem: Before i'd flashed aboot, bootloader was locked, and i used qfil software, but, the port was in 9006 mod, so i flashed emmc and created ext4 partition, then phone gone to 9008 mode, but the bootloader was locked and hence i was not able to flash partition, or boot twrp...
then i created new rawprogram0.xml to flash system using qfil, but it won't flash as filehorse do not provide information to flash more than 7 partitions, so i try to flash partition by replacing line of gptbackup0.bin to partition.mbn in rawprogram0.xml.....
then qfil downloaded files succefully to phone but now the problem arises, fastboot doesn't detect device, my windows device manager doesn't show any new device connected to my PC......
as i connects my phone to a usb cable, it starts itself and loads fastboot mode, now i'm unable to go to edl mode
pls help me to boot edl, because everytime usb is connected to phone it boots fastboot and fastboot had errors and it doesn't connects device to PC...
Satyam_Mishra said:
Hello!!!!!!!! I Had a lot of questions, help me to sort out such situations I'd Bricked Asus ZE550KL...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/zenfone-2-laser
With that stated...
The following, device specific, threads should be helpful for what you need to do and don't be afraid to ask for some member guidance within one of them too.
https://forum.xda-developers.com/showthread.php?t=3598328
https://forum.xda-developers.com/showthread.php?t=3466006
https://forum.xda-developers.com/showthread.php?t=3580731
If all else fails, and you don't receive any responses from the above threads, your next best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3246179
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Bricked Samsung Galaxy s5 sm-900i help

I need help debricking my S5 900I
The device wont respond, unless connected to my PC in which it seems to constantly connect and disconnect with it coming up as QHSUSB_BULK in device manager.
It will not boot at all, holding down power button has a small vibrate but only when plugged into my pc, then goes into what i call a silent re-booting, where only the pc USB connect and USB disconnect sounds happened every 10 or so seconds,
It will not boot into download mode nor recovery mode. I have heard that i can get it to boot to download mode with a microsd and a debrick image, but i cannot find a debrick image for the sm-900I.
If someone could give me a list of instructions and a link to a debrick image, i would be extremely grateful
Thanks, matt
matthew4544 said:
I need help debricking my S5 900I. The device wont respond, unless connected to my PC in which it seems to constantly connect and disconnect with it coming up as QHSUSB_BULK in device manager...
Click to expand...
Click to collapse
I don't have this variant but, one or both of the following, device specific, threads should be helpful for what you are looking for and don't be afraid to ask for some member guidance within one of them too.
https://forum.xda-developers.com/showthread.php?t=3688999
https://forum.xda-developers.com/showthread.php?t=3694835
If all else fails, and you don't receive any responses from the above threads, your next best bet is to post this question within the following Q&A thread that's specific to the klte variants.
https://forum.xda-developers.com/showthread.php?t=2700073
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

I Can't Access my Phones Download/Fastboot Mode!

Recently I was able to port a custom recovery to my new phone Blu Vivo 8L. However I can't test it, because I cannot access fastboot/download mode. I've tried using the adb commands (adb reboot download, adb reboot fastboot, and adb reboot-bootloader) and none of them seemed to work. My phone would reboot as expected but instead of being taken to download/fastboot mode my phone would simply just turn off and nothing more. I tried pushing a combination of buttons with the phone off and was only able to access recovery, and a weird mode I've never heard of called Factory Mode (you can test hardware, clear eemc, etc.). Something I found interesting is that in recovery mode there is an option to reboot to the bootloader (I tried that and it didn't even work, just another black screen). Can someone help me? I really want to access my bootloader so I can unlock it, flash my ported recovery, and get root access. Thanks!
DataStream3 said:
Recently I was able to port a custom recovery to my new phone Blu Vivo 8L. However I can't test it, because I cannot access fastboot/download mode...
Click to expand...
Click to collapse
I don't have this device and i did see that the following area of the was just created that's specific to your device but, the XDA folks doesn't seem to be done moving threads for this device within that area yet.
https://forum.xda-developers.com/blu-vivo-8l
I did see that your device has a Mediatek MT6735 Chipset. So you should be able to obtain some type of member guidance within one of the following General Mediatek threads.
https://forum.xda-developers.com/showthread.php?t=3506775
https://forum.xda-developers.com/showthread.php?t=2701283
https://forum.xda-developers.com/showthread.php?t=2912064
https://forum.xda-developers.com/showthread.php?t=2895514
https://forum.xda-developers.com/showthread.php?t=2317790
https://forum.xda-developers.com/showthread.php?t=2277112
There's other possible threads but, those should give you a good start...
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I don't have this device and i did see that the following area of the was just created that's specific to your device but, the XDA folks doesn't seem to be done moving threads for this device within that area yet.
https://forum.xda-developers.com/blu-vivo-8l
I did see that your device has a Mediatek MT6735 Chipset. So you should be able to obtain some type of member guidance within one of the following General Mediatek threads.
https://forum.xda-developers.com/showthread.php?t=3506775
https://forum.xda-developers.com/showthread.php?t=2701283
https://forum.xda-developers.com/showthread.php?t=2912064
https://forum.xda-developers.com/showthread.php?t=2895514
https://forum.xda-developers.com/showthread.php?t=2317790
https://forum.xda-developers.com/showthread.php?t=2277112
There's other possible threads but, those should give you a good start...
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Thank you very much! I look at the threads!

Galaxy S6 Soft Brick - not recognized by any program

Hello,
two days ago I tried to flash a new recovery (TWRP) and a new ROM on my Galaxy S6 (SM-G920F). I used Heimdall-Frontend 1.4.0 and also have Heimdall installed. Flashing the recovery perfectly worked, but when I tried flashing the boot.img, the process got up to about 30% and then said "FAILED!". Now my phone only shows a blue screen with this on it: "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
I can still get the phone into Download mode, but the problem is that neither Heimdall nor ADB does recognise my phone. "heimdall detect" gives "ERROR: Failed to detect compatible download-mode device." and "adb devices" gives just nothing at all, although the device is in Download mode and I have installed the latest drivers. I've tried it on other laptops as well but it didn't work.
What is also weird is that the phone immediately turns off when unplugging it from USB, even though it was charging for hours.
So what should I do now?
Thanks in advance.
Nyphilia said:
Hello, two days ago I tried to flash a new recovery (TWRP) and a new ROM on my Galaxy S6 (SM-G920F)......
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device and variants.
https://forum.xda-developers.com/showthread.php?t=3110220
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Categories

Resources