Database Info

flashed to cricket but no data

I just got a Samsung Moment Sprint(Android) Fully Flashed To Cricket from ebay
sms and voice works great but I cant get data to work
I activated my phone with
some say all you have to do is request to be put on the "ADR Smartphone All In $55" plan. Others like my self also got there phone type listing changed form CPE "Customer Provided Equipment" to the "Kyocera M6000".
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=762756
(didnt work)
also i checked
Don't forget to remove your "autostart.sh" and your "u2nl". autostart.sh is in /data/opt and your u2nl is in /system/bin. Or you could simply remove autostart and reset your phone.
Click to expand...
Click to collapse
(could not find the files)
also it says
you no longer need a WAP proxy. MMS well also work with only the need to setup your APNs. Your internet well be much faster in most cases 2x as fast.
Click to expand...
Click to collapse
how do i check this?
and how do i setup APNs?
I have a little experience rooting android (cliq and nook color) but i know nothing about flashing...
any help would be greatly accepted
thanks!

does anyone have anything? i have been trying to figure this out for around 10 hours today... i also tried pull of the apns-confold.xml edit and but push back in to the phone but that doesnt work eather.

Couldn't find Mobile Network Type

Hello, Recently I have bought an Unlocked At&T LG G3 The seller told me that the phone has a bad IMEI But it's unlocked to be used interntionally. When I received it, It's working fine, except the data network speed trough EDGE is too slow. As yo can see on the screenshot below I couldn't find the option to change the network type. and I'm stuck at "E" which mean EDGE.
http://s14.postimg.org/8r7vs0x27/Quick_Memo_2015_09_09_11_41_43_1.png
The phone's model is LG-D850 and it's running android 4.4.2 KitKat. it has no IMEI when I dial *#06# it shows IMEI: 0-05 on Settings/about phone/Status... it says IMEI: 0

Anyone here to help?

First, here are the possible reasons why you don't have an IMEI:
The phone was reported lost or stolen in the past.
The phone is still active on the owner's wireless carrier account.
There is money owed on the wireless carrier account to which the ESN/MEID/IMEI is connected.
For the reasons above, this community does not support such devices and you will probably not get any help.
But, this can also happen during a bad flash, so to fix the issue, you have 3 options:
Reset, unroot, then root and flash again
Try the suggested steps in this video
Find a company that can fix the problem by sending the phone to them

youngunix said:
First, here are the possible reasons why you don't have an IMEI:
The phone was reported lost or stolen in the past.
The phone is still active on the owner's wireless carrier account.
There is money owed on the wireless carrier account to which the ESN/MEID/IMEI is connected.
For the reasons above, this community does not support such devices and you will probably not get any help.
But, this can also happen during a bad flash, so to fix the issue, you have 3 options:
Reset, unroot, then root and flash again
Try the suggested steps in this video
Find a company that can fix the problem by sending the phone to them
Click to expand...
Click to collapse
Thanks for your reply, I'm not seeking to restore the IMEI. I just want to have the option to switch mobile network type. Should I root the phone and install a custom ROM?

AminhoVic said:
Thanks for your reply, I'm not seeking to restore the IMEI. I just want to have the option to switch mobile network type. Should I root the phone and install a custom ROM?
Click to expand...
Click to collapse
My bad, thought you wanted the IMEI back. In that case, the E (edge) is showing up could be due to Maroc Telecom throttling your connection or their towers could be far way (happens when you travel cross country too). Anyway, if you want to fiddle with network settings and try to get it to work BEFORE attempting to flash any ROM, try the following [3845#*855# 3845#*850#] USSD code from your stock dialer. You will get a hidden menu containing a juicy list of options and settings, so what you are probably looking for is the "LTE-Only" option (I am not sure though, but you can look through the settings).
And as always, attempt the suggestions AT YOUR OWN RISK.

youngunix said:
My bad, thought you wanted the IMEI back. In that case, the E (edge) is showing up could be due to Maroc Telecom throttling your connection or their towers could be far way (happens when you travel cross country too). Anyway, if you want to fiddle with network settings and try to get it to work BEFORE attempting to flash any ROM, try the following [3845#*855# 3845#*850#] USSD code from your stock dialer. You will get a hidden menu containing a juicy list of options and settings, so what you are probably looking for is the "LTE-Only" option (I am not sure though, but you can look through the settings).
And as always, attempt the suggestions AT YOUR OWN RISK.
Click to expand...
Click to collapse
I'm living at a major city, here the 4G works great. So yeah I have to change the mobile network type since it is on EDGE by defaut I guess.
I attemted the USSD code however it says "connection problem or invalid mmi code" after I hit dial. I have also tried a bunch of codes before but no luck.
I think I will falsh the phone that's the option left. I just have rooted the phone, then I will install TWRP and I will try to flash a ROM in it. What do youu suggest me to use from those ROMs posted here ?

AminhoVic said:
I'm living at a major city, here the 4G works great. So yeah I have to change the mobile network type since it is on EDGE by defaut I guess.
I attemted the USSD code however it says "connection problem or invalid mmi code" after I hit dial. I have also tried a bunch of codes before but no luck.
Click to expand...
Click to collapse
I get the same error if I use a third party dialer app (i.e., Dialer) until I tried the stock phone app.
I think I will falsh the phone that's the option left. I just have rooted the phone, then I will install TWRP and I will try to flash a ROM in it. What do youu suggest me to use from those ROMs posted here ?
Click to expand...
Click to collapse
I haven't flashed any custom ROMs on my LG, but from experience, each device somehow reacts differently to custom ROMs. For instance, I've flashed my S.G. Note (i717) over 30 times and some ROMs were stable at first then started having issues with them.
The best advice I can give you, is to pick a ROM from the list you posted and check the comments to see if it is stable or too many users have issues with it.

AminhoVic said:
I'm living at a major city, here the 4G works great. So yeah I have to change the mobile network type since it is on EDGE by defaut I guess.
I attemted the USSD code however it says "connection problem or invalid mmi code" after I hit dial. I have also tried a bunch of codes before but no luck.
I think I will falsh the phone that's the option left. I just have rooted the phone, then I will install TWRP and I will try to flash a ROM in it. What do youu suggest me to use from those ROMs posted here ?
Click to expand...
Click to collapse
Ever think that it does not have the correct bands for your carrier?

How to Add APN in LS996 ?

Hello
i Have LS996 and problem add APN i tried almost Apps from Play store but its failed ,
How to Fix that ?

Search the forums...
Solution is there :good:

Alex_XV6700 said:
Search the forums...
Solution is there :good:
Click to expand...
Click to collapse
Badly i not Found can you provide me link

mohsin-* said:
Badly i not Found can you provide me link
Click to expand...
Click to collapse
Is ur phone rooted?

Let them search @rAndroid3 its all in here. We always help out but even if not rooted apns show in the menu.

Alex_XV6700 said:
Let them search @rAndroid3 its all in here. We always help out but even if not rooted apns show in the menu.
Click to expand...
Click to collapse
Hehe well, really, out there is everything.

Just say wah , there is no Thread i found from last many many days ,
in my cause i seen APN option even with Shortcut master i can access APN menu but there is no option for add New apn , only 1 Option there which is " restore Default " i tried almost 10 different app but none of them help to add new APN ,
So if you have solution for share post here , i think users need Solution not reply with use Search , i m not newwibe who dont know how to use search option

mohsin-* said:
Just say wah , there is no Thread i found from last many many days ,
in my cause i seen APN option even with Shortcut master i can access APN menu but there is no option for add New apn , only 1 Option there which is " restore Default " i tried almost 10 different app but none of them help to add new APN ,
So if you have solution for share post here , i think users need Solution not reply with use Search , i m not newwibe who dont know how to use search option
Click to expand...
Click to collapse
Exactly, what condition is your phone in? What version rom? rooted? SIM unlocked? Additional LTE bands added?
What are you trying to gain by adding or editing APN? If we have some more info, maybe there is an answer out there.

There are lots of answers... Just lazy ppl bragging about no possible solution. I've been on this forum for a long time and I have seen lots of ppl like this a while ago was a guy claiming no zv8 and zv9 root. Blah blah... Search man! We're not slaves to anyone. Everything is in the forums... Its one of the xda rules SEARCH!

Alex_XV6700 said:
There are lots of answers... Just lazy ppl bragging about no possible solution. I've been on this forum for a long time and I have seen lots of ppl like this a while ago was a guy claiming no zv8 and zv9 root. Blah blah... Search man! We're not slaves to anyone. Everything is in the forums... Its one of the xda rules SEARCH!
Click to expand...
Click to collapse
Ok I've searched. I've tried the UNLOCK APN option via shortcut master... It says "APN unlocked". I've added a new APN setting there also. Still same as op stated... mobile networks APNs show a whited out "ota" and the only option is to reset to default.
For me, I've flashed between rooted zv9 to unrooted to rooted a couple or three times. Recently, I was able to add a new apn and had a gsm signal that showed the signal strength as a straight line incline. At this point I only had calling and sms, no data or mms.
Then, after unrooting and rerooting, the phone showed invalid sim card. I changed the build.prop file setting ro.build.target_operator=SPR to att and this finally brought back my calling and sms as well as my mvno name displayed in the upper left corner (which wasn't there before). Also, the signal strength changed to an inclining bar graph as opposed to the straight line incline... but still no data nor mms.
As mentioned above, I've tried different settings in SM including finding a hidden menu that displayed several AT&T APNs and was able to add my APN there but it still doesn't show under "mobile networks". I've also replaced the node files and changed the permissions. This was a step backwards. Even though I've done my fair share or "SEARCH!"ing, I'm sure I missed something.
It's pretty arrogant to assume everyone is going to be as vested into this forum the way you are. Maybe if the forum were set up where you didn't have to do so much searching to find how to set up a phone, this site wouldn't have so many lost people. It's like a huge puzzle that can take days, if not weeks to put everything together.
If it is so easy to find the answers by simply "SEARCH!"ing, why not simply throw in some links for the poor fellow instead of hanging out just to belittle people.

I know this is a old post but has anyone found a solution to this problem. I also am having problems adding apn settings. I am rooted and on zvb. I get calling and texting but no mms or data. I have enable LTE in the hidden menu but still not working. I am with Koodo mobile in Canada and LTE is band 4.

LG FLEX LS996 APN SETTING 1000% Done Sireal
**************************************
DIAL
5689#*996#
FIELD TESTING
MODEM SETTING
PDP Setting
APN Settings
Hold the RIGHT OPTION BUTTION....(Trick is here)
ADD NEW
SAVE
VIOLAAA.......10000%
Done by Sireal (GSM Developer)
SAY THANKS

[HOW-To] Manual Program (SPR&VZW)

Well, Over the last few days I've seen more and more reports of "no service" and "unknown" service issues. Where you cant make or recieve calls, or text,and you are only getting data on lte.
" This will work to manual program a vzw phone also if you choose the one that has VZW.only in its name"
The LG LS997 V20 seems to have lost the ability to edit your PTN and MSID under ##786# method, and ive verified they also removed
##6DigitMSL# code. This eliminated the usual route to manually program your phone and get talk and text back without the network sending a update.
Heres the fix
Download Shortcut Master Lite From the playstore
Link here :
https://play.google.com/store/apps/details?id=org.vndnguyen.shortcutmaster.lite
and once downloaded you need to go to the search option and search
iot.cdmasettings
Then you need to click Launch on that one you searched..
Click:
CDMA PREFERENCES
Then:
NAM settings
Then Enter these things
MDN = Your Phone number
HOME SID = 4139
MCC = 310
MNC = 00
MIN2 = YOUR AREA CODE
MIN1 = MSID ( need to get from sprint or sprint.com chat ask for msid )
IMSI_MCC - 310
IMSI_MNC = 00
S2 = 000
S1 = 0001370
then back out and let it reboot,
for some this is a soft fix, for some this may be all you needed- it dosn't address the full issue, but this will at-least get you started to recovery.

Confirmed this worked on my LS997. Awesome Dev took several hours out of his day to troubleshoot this and get a fix.

screenshots added ++++ sorry text is small, i had to remove my personal info from the photos. Just use photos as reference for the text in op!
Hope this helps a few out, im still working on finding a 100% resolution to why this even came out as a issue. I'm almost certain your modem is NOT the issue, but a issue with provisioning and the way your phone is getting updated/or received a bad update
please continue to provide feedback and info related to when this 1st happens so i can figure out the main source.

stenomatic said:
Confirmed this worked on my LS997. Awesome Dev took several hours out of his day to troubleshoot this and get a fix.
Click to expand...
Click to collapse
Def worth the time man. You made it 10x easier being direct and following the info to the T.
EXACTLY what needed to be done for a positive resolution!
:good:

you can also go to the same place by searching msl.
and clicking the bottom one of the 2 that show up, click edit, and put in your ptn click okay the the full msid then okay. once done you need to reboot.

I don't think I'm having any issues other than I seem to experience more areas where I lose service than I did before I rooted.
When I searched for iot.cdmasettings - nothing came up.
I then searched for cdmasettings and again nothing came up.
I then searched for iot and a bunch of stuff came up. I noticed the 2nd. item from the top had iot/cdmasettings so I clicked that one.
My S1 is 0000375
I wonder if MSID is the same as MSL?
The link to the app above didn't work for me.
Try this one - https://forum.xda-developers.com/showthread.php?t=2800117
Jack

midmadn said:
I don't think I'm having any issues other than I seem to experience more areas where I lose service than I did before I rooted.
When I searched for iot.cdmasettings - nothing came up.
I then searched for cdmasettings and again nothing came up.
I then searched for iot and a bunch of stuff came up. I noticed the 2nd. item from the top had iot/cdmasettings so I clicked that one.
My S1 is 0000375
I wonder if MSID is the same as MSL?
The link to the app above didn't work for me.
Try this one - https://forum.xda-developers.com/showthread.php?t=2800117
Jack
Click to expand...
Click to collapse
No.. Your msid is a number sprint uses to provision.
I work for sprint.
Are you on sprint and using my rom?
This only applies to sprint users.

Team DevDigitel said:
No.. Your msid is a number sprint uses to provision.
I work for sprint.
Are you on sprint and using my rom?
This only applies to sprint users.
Click to expand...
Click to collapse
If you call or go online sprint will give you msl, and your msid
Msl is master susbsidy lock code (××××××) 6 digit
Msid is semilar to your phone number (×××-×××-××××)10 digit

Team DevDigitel said:
No.. Your msid is a number sprint uses to provision.
I work for sprint.
Are you on sprint and using my rom?
This only applies to sprint users.
Click to expand...
Click to collapse
The rom I am running is 5.0 or F I think I have seen it referred as. Not sure if it's yours but if it is - Thank You very much for all you have done for us poor left out sprint users. I downloaded a newer version (6.0) but not sure if I want to install it or if I'll gain anything.

midmadn said:
The rom I am running is 5.0 or F I think I have seen it referred as. Not sure if it's yours but if it is - Thank You very much for all you have done for us poor left out sprint users. I downloaded a newer version (6.0) but not sure if I want to install it or if I'll gain anything.
Click to expand...
Click to collapse
i would clean install version 6.5 phh
the majority of us are running it now.
Its stable and soild, and will pass safetynet,
im unsure why you dont have the hidden menu stuff, 6.5 phh should.
update to that and see if its any better.
we may need to get people to backup their radio and see what ones work better.
im on the oldest radio

I made a mistake. I was going to install F but ended up going with J.
6.5 PHH is all downloaded. I'll give it a try.
Thank You very much.

Can u check which version has the stuff to manually program 6.5 phh when i search and find iot.cdmasetting and hit launch in shortcut master it does nothing...
Edit
Nevermind the 6.5 isn't rooted to begin with...I had
A 6.01 back up that works fine
Sent from my LG-LS997 using Tapatalk

nexus6r3plicant01 said:
Can u check which version has the stuff to manually program 6.5 phh when i search and find iot.cdmasetting and hit launch in shortcut master it does nothing...
Edit
Nevermind the 6.5 isn't rooted to begin with...I had
A 6.01 back up that works fine
Sent from my LG-LS997 using Tapatalk
Click to expand...
Click to collapse
? both 6.5 versions have root, you must be dirty flashing or doing something else.
2 versions of 6.5 bud.
phh root witch is built into magisk,
and supersu root witch is a seperate app.
5.5 and 6.5 both are exactly the same, minus using magisk manager.

I didn't download phh app but it wouldn't request root on 6.5 so I just used a back up
Sent from my LG-LS997 using Tapatalk

nexus6r3plicant01 said:
I didn't download phh app but it wouldn't request root on 6.5 so I just used a back up
Sent from my LG-LS997 using Tapatalk
Click to expand...
Click to collapse
Didn't need any apps. Its built into magisk for root.
Thats the build im using as my daily. Root takes a min to setup as the 1st 15min after boot its still optimizing and doing commands.
Im 100% sure the no calls and text bug comes from using a aosp rom and changing nv info. Knocked me off service all day and didnt know.
Lost my ptn and my msid
Also got hit with a error code 16 and had to speak to the networks solution dept.

Maybe a tad bit more help...
I followed every step the only issue I've noticed is I can now make calls but only when I turn roaming on. If I just connect to the sprint network I get data but it says mobile network unavailable when trying to make a call. Any ideas?

kdouvia said:
I followed every step the only issue I've noticed is I can now make calls but only when I turn roaming on. If I just connect to the sprint network I get data but it says mobile network unavailable when trying to make a call. Any ideas?
Click to expand...
Click to collapse
Can you go under
settings
General
About
Status
What prl do you have?

Team DevDigitel said:
Can you go under
settings
General
About
Status
What prl do you have?
Click to expand...
Click to collapse
I have PRL 162. It's odd because I only receive calls and can make them if set to roaming. If I'm set to roaming to make calls I can't update PRL only when connected to just LTE

kdouvia said:
I have PRL 162. It's odd because I only receive calls and can make them if set to roaming.
Click to expand...
Click to collapse
Thats why, try a update prl and see if it changes. Do it on wifi if it dosnt work try on lte/3g
162 is not a sprint prl
you need PRL 54022 or 54xxx
any version really 54 whatever will work.
if prl update wont change it the only other idea would be
##diag# put into diag mode and use a tool like cdma workshop or similar to push the prl to your phone.
[email protected] is my hangouts email. We can speak more about this but talking about NV items and the tools that work with them
is a grey area on xda. I can not share my version of cdma workshop as its a paid for version linked only to my pc. There are free versions and tutorials out there on how to connect to a phone in diag mode and use cdma workshop or any other es tool to do the prl push

Team DevDigitel said:
Thats why, try a update prl and see if it changes. Do it on wifi if it dosnt work try on lte/3g
162 is not a sprint prl
you need PRL 54022 or 54xxx
any version really 54 whatever will work.
if prl update wont change it the only other idea would be
##diag# put into diag mode and use a tool like cdma workshop or similar to push the prl to your phone.
[email protected] is my hangouts email. We can speak more about this but talking about NV items and the tools that work with them
is a grey area on xda. I can not share my version of cdma workshop as its a paid for version linked only to my pc. There are free versions and tutorials out there on how to connect to a phone in diag mode and use cdma workshop or any other es tool to do the prl push
Click to expand...
Click to collapse
Thank you

Question Anyone having issues with VoWiFi NA version?

I just got the NA version of the ROG Phone 5 and sadly I cannot get VoWiFi working on TMobile. Sadly I'm in an area where I don't get the best signal and it's extremely important for this feature to work. Especially considering I spent 1k+ for this phone... Any help/guidance would be appreciated.

Have you enabled it in settings and then tried a reboot?
I've also noticed that it may not work until the SIM is installed BEFORE initial setup (or before a factory reset)

I confirmed with other people too. US version doesnt have Tmobile wifi. If it would, I would have bought one

twistedumbrella said:
Have you enabled it in settings and then tried a reboot?
I've also noticed that it may not work until the SIM is installed BEFORE initial setup (or before a factory reset)
Click to expand...
Click to collapse
Yeah I tried that but didnt work so i manually enabled it using the phone dialer and after i toggle it on or off it will turn on but it turns off after reboot so need to root it so i can make the settings stick.

daviddem said:
I confirmed with other people too. US version doesnt have Tmobile wifi. If it would, I would have bought one
Click to expand...
Click to collapse
It actually does work

My AT&T and T-Mobile SIMs (both Red Pocket MVNO) have VoLTE but not VoWiFi.

kva1992 said:
It actually does work
Click to expand...
Click to collapse
So do you get wifi calling with US ROG phone on Tmobile?

daviddem said:
So do you get wifi calling with US ROG phone on Tmobile?
Click to expand...
Click to collapse
Yup just have to manually enable it Everytime it boots up but if you root it you can set the props and it will be permanent. In the process of doing that atm.

kva1992 said:
Yup just have to manually enable it Everytime it boots up but if you root it you can set the props and it will be permanent. In the process of doing that atm.
Click to expand...
Click to collapse
Thank you. I was debating between ROG or xperia 1iii. but if this works. Ill get ROG.
If you dont mind, can you please post the dialer code

daviddem said:
Thank you. I was debating between ROG or xperia 1iii. but if this works. Ill get ROG.
If you dont mind, can you please post the dialer code
Click to expand...
Click to collapse
Sure here you go *#*#3642623344#*#*
You should be able to copy and paste if that doesn't work try pasting but delete the last * and add it manually. If that still doesn't work just manually type it in. But I tested it out a few times nd it works even turned on airplane mode and it works. Wi-fi calling was a deciding factor for me lol was about to return it until I found out I could get it to work properly.

daviddem said:
Thank you. I was debating between ROG or xperia 1iii. but if this works. Ill get ROG.
If you dont mind, can you please post the dialer code
Click to expand...
Click to collapse
kva1992 said:
Sure here you go *#*#3642623344#*#*
You should be able to copy and paste if that doesn't work try pasting but delete the last * and add it manually. If that still doesn't work just manually type it in. But I tested it out a few times nd it works even turned on airplane mode and it works. Wi-fi calling was a deciding factor for me lol was about to return it until I found out I could get it to work properly.
Click to expand...
Click to collapse
I'd like to add that after running the dialing code you have to enable wifi calling in the settings app.
Aswell as that, at least for me, I need to disable and re-enable it within settings after re-running the dial after reboot, for it to actually reconnect
Just to avoid any confusion.
This does work tho! Kva is right!

Trickster29 said:
I'd like to add that after running the dialing code you have to enable wifi calling in the settings app.
Aswell as that, at least for me, I need to disable and re-enable it within settings after re-running the dial after reboot, for it to actually reconnect
Just to avoid any confusion.
This does work tho! Kva is right!
Click to expand...
Click to collapse
Thank you both. Ill order the phone and try it.

Trickster29 said:
I'd like to add that after running the dialing code you have to enable wifi calling in the settings app.
Aswell as that, at least for me, I need to disable and re-enable it within settings after re-running the dial after reboot, for it to actually reconnect
Just to avoid any confusion.
This does work tho! Kva is right!
Click to expand...
Click to collapse
It's so stupid wish they enabled it by default would make all our lives easier

kva1992 said:
It's so stupid wish they enabled it by default would make all our lives easier
Click to expand...
Click to collapse
I agree, but idk if they need some authorization from T-Mobile to enable it by default and we're just the end user working around that.
Otherwise, I'm not really sure at all why the functionality is developed but not enabled by default.

Trickster29 said:
I agree, but idk if they need some authorization from T-Mobile to enable it by default and we're just the end user working around that.
Otherwise, I'm not really sure at all why the functionality is developed but not enabled by default.
Click to expand...
Click to collapse
Yeah it's stupid I ended up talking to advanced tech support and the guy has never heard of ROG phone 5 and said I should return it cuz it seems like it's a hardware issue.... I'm like dude it's your system not giving me proper access's and authorizing my phone... He's like I guess you know more about phones than I do... The idiot even made me reset my phone to try and fix it even though I told him several times that has nothing to do with it.... I swear I have no idea how some of these morons get jobs as IT... At least have basic IT understanding....

They're not in IT. They're customer service reps. They read from a script.
Check out the movie The Internship. It's just like that.

twistedumbrella said:
They're not in IT. They're customer service reps. They read from a script.
Check out the movie The Internship. It's just like that.
Click to expand...
Click to collapse
Well, when I'm talking to the advanced Technical team I am not talking to customer service reps... I talked to a customer service rep and they forwarded me to the IT team. Considering they are called advanced technical teams I would assume they are in IT. whereas the initial person I talked to was and clearly stated she was a customer service rep.

The only difference between the two people you spoke with is that one had access and authorization to suggest more "advanced" solutions. I'm not saying they shouldn't have better training, but legitimate IT professionals rarely work the call center as more than a summer job.
Anyway, the point was that they're a waste of time unless the issue is the SIM card or your plan. It's unfortunate.
Dial codes typically trigger an intent. If you can track down the intent, you can have it launch automatically on boot. Once that's taken care of, it shouldn't be too hard to automatically enable the setting. That is assuming you called because setting the prop didn't work.
Another alternative if you do have a property and can't write to system is setting it with a magisk module, since the system is read only on a firmware level.

twistedumbrella said:
The only difference between the two people you spoke with is that one had access and authorization to suggest more "advanced" solutions. I'm not saying they shouldn't have better training, but legitimate IT professionals rarely work the call center as more than a summer job.
Anyway, the point was that they're a waste of time unless the issue is the SIM card or your plan. It's unfortunate.
Dial codes typically trigger an intent. If you can track down the intent, you can have it launch automatically on boot. Once that's taken care of, it shouldn't be too hard to automatically enable the setting. That is assuming you called because setting the prop didn't work.
Another alternative if you do have a property and can't write to system is setting it with a magisk module, since the system is read only on a firmware level.
Click to expand...
Click to collapse
How would I set that up using magisk module? One Issue I have noticed is the wifi calling turns itself off after a while. sometimes it works for several hours other times maybe a day but then turns off and I have to restart the phone and run the command again.

Developer Guides
The Magic Mask for Android
topjohnwu.github.io