Database Info

Guide for Sprint Tp2 on boost

Just in case anyone needs it
This is a guide based off my experiences on how to get everything working properly on boost mobile. This is not my work nor do i take credit for it i was helped by many. im just putting it together in one place for every one that needs it. Oh and i seen all over craigslist and ebay that they sell guides on how to do this everyone that learns from here please do not try to sell this instead help out who ever needs it just like you needed it.
1) You need to have a boost CDMA account active
* CDMA, yes boost has CDMA just like sprint. ** CDMA not IDEN in other words no walkie talkie.
1.5) if you have a walkie talkie account just call boost Customer service (C.S.) and tell the rep you want to transfer your account to the cdma side
2) Call boost mobile C.S. and tell them you want to swap phones on your account for whatever reason you can make up i.e. phone broke or fell on water. Just tell them its a red phone or something and it works
3) Do not tell them that your new phone is a sprint phone they will tell you cant do it not possible. Dont get worried it will work
4) They will ask you for the phones info give it to them (if they ask u if its a sprint phone deny it all the way) then they will tell you what numbers to punch in follow that exactly the way they say.
5. Once it is done wait a few while the phone gets completely activated on their system. At first text messages might not work and data as well. just give it till the end of that day it should work but if it doesn just wait a little bit.
6. Then make sure you carrier provisioned it make sure to select Sprint.
7. Run the Sprint prl update to make sure you get data working.
** Now for the big one everyone has been having problems with MMS**
Never mind i forgot how to do that one sorry . LOL
8. On a custom rom (i use Mighty rom FF) install the Sprint Arcsoft MMS 5.0.82.79 cab that i atached at the bottom and do exactly like this
*Install the cab to your phones memory
*Soft reset
*Go to Messages
*All messages
*Menu
* MMS options or Pics/Video Options
*Servers
* Click on NEW
*Server Name = put whatever name you want
*Gateway = leave blank
*Port number leave at 80
*Server address: http://mm.myboostmobile.com
*Connect via: Sprint
*Send limit= leave at 500K
*Press done
* Under setting select the name you created and then click on Set as default
* Exit out and soft reset just to be on the safe side then your should be able to send/receive MMS
9) You should have everything working correctly from here its back to customizing however you feel like.
I added the soft reset cab also just to make it easier just install it doesnt matter either your phones memory or sdcard and look for the icon in the start menu press it and it will soft reset
Oh and foreveryone that bought the phone "flashed to boost mobile" there isnt such thing they just did as stated above. There is no flashing to boost and there isnt a boost mobile rom.
If i forgot something let me know ill add it to here or maybe someone else will. If you have any either question just ask.

Wow!! What a simple method this is. So many "third-party" cell phone shops are charging as much as $75 to $100 to "flash" these phones to boost. That's insane. Thanks!!!

Glad you liked it. If you really like it then how about hitting the thanks button instead of just saying it.
Also if you feel like your missing something by not paying i can help you with that too ill send you a paypal link.LOL

I take it back, it's not that simple. Tried many many times and I guess things are more enforced since then. Ended up paying but was WELL worth every penny. I'm loving the phone now. No thanks to this

quickbird144 said:
I take it back, it's not that simple. Tried many many times and I guess things are more enforced since then. Ended up paying but was WELL worth every penny. I'm loving the phone now. No thanks to this
Click to expand...
Click to collapse
i was j/k about the paypal link. Many others have used the guide without a problem your the only one that has had a problem to successfully do it and you happen to be the only one i jokingly said anything about a paypal link. LMAO

Either way, glad i took it to get done

TP2 on Boost working great so far!
Using the instructions above, I just migrated my Iden Boost account to CDMA on my TP2! The Boost rep said that since I didn't say which phone I had, she couldn't tell me that it couldn't be activated. She said if I had said I wanted to switch to the HTC TP2, then she would have been obligated to tell me it could not be done. I have been receiving SMS and MMS with no problems. The Internet works fine too! Thanks for the info! I am glad I did not pay someone a crazy amount for these relatively simple instructions!

cayjominara said:
Using the instructions above, I just migrated my Iden Boost account to CDMA on my TP2! The Boost rep said that since I didn't say which phone I had, she couldn't tell me that it couldn't be activated. She said if I had said I wanted to switch to the HTC TP2, then she would have been obligated to tell me it could not be done. I have been receiving SMS and MMS with no problems. The Internet works fine too! Thanks for the info! I am glad I did not pay someone a crazy amount for these relatively simple instructions!
Click to expand...
Click to collapse
You are most definately welcomed especially since you hit the thanks button. Glad i was of help.

Internet issue with htc tp2 on boost mobile
I have the same issue here with the htc touch pro2,with internet and mms. Did anyone here know the boost mobile internet setting? If so,please do share. Thanks.

destin4ever said:
I have the same issue here with the htc touch pro2,with internet and mms. Did anyone here know the boost mobile internet setting? If so,please do share. Thanks.
Click to expand...
Click to collapse
What issue are you talking about. From what i have read no one here stating they have a problem with their internet.
Read the guide again and look at step #7 if you still dont get it let me know.
**If i helped you in any way hit the thanks button**

Can I get some help? My TP2 has been working flawlessly on Boost since I followed your instructions. All of a sudden, today, whenever I try to use the internet or Titanium Weather, I get a message saying that "Your plan does not include wireless web or your balance is not suficient to cover the wireless web charge". I have been using the pay as you go plan and have plenty of money in my account. This problem just started today. Has Boost changed something? Or do you have any tips?

Ma$etas said:
Just in case anyone needs it
This is a guide based off my experiences on how to get everything working properly on boost mobile. This is not my work nor do i take credit for it i was helped by many. im just putting it together in one place for every one that needs it. Oh and i seen all over craigslist and ebay that they sell guides on how to do this everyone that learns from here please do not try to sell this instead help out who ever needs it just like you needed it.
1) You need to have a boost CDMA account active
* CDMA, yes boost has CDMA just like sprint. ** CDMA not IDEN in other words no walkie talkie.
1.5) if you have a walkie talkie account just call boost Customer service (C.S.) and tell the rep you want to transfer your account to the cdma side
2) Call boost mobile C.S. and tell them you want to swap phones on your account for whatever reason you can make up i.e. phone broke or fell on water. Just tell them its a red phone or something and it works
3) Do not tell them that your new phone is a sprint phone they will tell you cant do it not possible. Dont get worried it will work
4) They will ask you for the phones info give it to them (if they ask u if its a sprint phone deny it all the way) then they will tell you what numbers to punch in follow that exactly the way they say.
5. Once it is done wait a few while the phone gets completely activated on their system. At first text messages might not work and data as well. just give it till the end of that day it should work but if it doesn just wait a little bit.
6. Then make sure you carrier provisioned it make sure to select Sprint.
7. Run the Sprint prl update to make sure you get data working.
** Now for the big one everyone has been having problems with MMS**
Never mind i forgot how to do that one sorry . LOL
8. On a custom rom (i use Mighty rom FF) install the Sprint Arcsoft MMS 5.0.82.79 cab that i atached at the bottom and do exactly like this
*Install the cab to your phones memory
*Soft reset
*Go to Messages
*All messages
*Menu
* MMS options or Pics/Video Options
*Servers
* Click on NEW
*Server Name = put whatever name you want
*Gateway = leave blank
*Port number leave at 80
*Server address:
*Connect via: Sprint
*Send limit= leave at 500K
*Press done
* Under setting select the name you created and then click on Set as default
* Exit out and soft reset just to be on the safe side then your should be able to send/receive MMS
9) You should have everything working correctly from here its back to customizing however you feel like.
I added the soft reset cab also just to make it easier just install it doesnt matter either your phones memory or sdcard and look for the icon in the start menu press it and it will soft reset
Oh and foreveryone that bought the phone "flashed to boost mobile" there isnt such thing they just did as stated above. There is no flashing to boost and there isnt a boost mobile rom.
If i forgot something let me know ill add it to here or maybe someone else will. If you have any either question just ask.
Click to expand...
Click to collapse
Ok I have been working on my phone for two days now and no luck so I need some help, I use to have a blackberry with the walkie talkie that I programed to run on boost but had problems getting my text like 2 days later so I decide to switch over to the HTC TP2 so I called boost switched my number to there cdma side and did what they told me to get it connected. Now Im using the same sims card that was in the BB phone not sure if that makes any difference. I can call out and receive calls but I dont have data or text. I have tried different roms, mighty, and mighty ff, now im trying engery now, and I like the looks of it so I will stay with it. OK I have tried installing the cab files that you have posted up, Im sure Im just doing something wrong but I extracted the files to the phone but I dont see any changes and I never get to the text option screens that you say to change. Could you please help me out Im about to the point of going back to the cans with strings attached phones. Thanks
Adding this note now getting " dialed #777 cannot connect" I have tried a hard rest but still not connecting.

DigitalFunk said:
Ok I have been working on my phone for two days now and no luck so I need some help, I use to have a blackberry with the walkie talkie that I programed to run on boost but had problems getting my text like 2 days later so I decide to switch over to the HTC TP2 so I called boost switched my number to there cdma side and did what they told me to get it connected. Now Im using the same sims card that was in the BB phone not sure if that makes any difference. I can call out and receive calls but I dont have data or text. I have tried different roms, mighty, and mighty ff, now im trying engery now, and I like the looks of it so I will stay with it. OK I have tried installing the cab files that you have posted up, Im sure Im just doing something wrong but I extracted the files to the phone but I dont see any changes and I never get to the text option screens that you say to change. Could you please help me out Im about to the point of going back to the cans with strings attached phones. Thanks
Adding this note now getting " dialed #777 cannot connect" I have tried a hard rest but still not connecting.
Click to expand...
Click to collapse
how long has it been since you did the switch to tp2?

Just this past weekend, I now can text but no mms nor data. I cant get the Sprint Arcsoft MMS 5.0.82.79 cab installed, I have Arcsoft 5.27.34 now but cant add any new servers.

unlock first??
Probably a dumb question here, but does the phone need to be unlocked before hand? Your instructions don't mention it so I wanted to be sure.
Thanks!

[email protected] said:
Probably a dumb question here, but does the phone need to be unlocked before hand? Your instructions don't mention it so I wanted to be sure.
Thanks!
Click to expand...
Click to collapse
Phone does not need to be unlocked if your gonna be running a stock rom. If your gonna be using a custom then you need to have unlocked so you can install the custom rom then install the acrosoft for custom rom. Hopes this answered your question

Thanks! Great Job!

saajuu said:
Thanks! Great Job!
Click to expand...
Click to collapse
Your welcome

im on a blackberry plan right now, couldnt i just call them and switch to the 50/month plan and then update my phone on the website by entering in the ESN# from the touch pro 2. i have no idea what to say if im asked what the phone model is.

if your on the blackberry plan most likely your gonna have to do both changes at the same time ( your plan & phone).
Also in re: to what phone to tell them that you have thats already answered in the guide in the first post of this thread.
If the website is allowing to update ESN# changes then you might be able to do both there without having to call

[Q] unlock question (aahk & miui)

I used aahk for unlock/root/cwm etc and flashed miui right after it. Now I put in another sim and it says no service but in the the apn settings it shows the carrier I am trying to connect. But when I open the network operators options it gives me an "error while searching for nwtwork".
Not sure this is miui or aahk issue. Please help.

niznet said:
I used aahk for unlock/root/cwm etc and flashed miui right after it. Now I put in another sim and it says no service but in the the apn settings it shows the carrier I am trying to connect. But when I open the network operators options it gives me an "error while searching for nwtwork".
Not sure this is miui or aahk issue. Please help.
Click to expand...
Click to collapse
As far as I know the sim unlock does not work for all carriers and all phones. There was a case similar to yours a couples of weeks and guys from the thread answered that..but it might be different. Read this posts it may be helpfull
http://forum.xda-developers.com/showpost.php?p=16460362&postcount=1391
But search a bit in the Hack Kit Thread, there are many questions about that....

You still have to update the APN settings for whatever carrier your trying to use.

Couldn't find Mobile Network Type

Hello, Recently I have bought an Unlocked At&T LG G3 The seller told me that the phone has a bad IMEI But it's unlocked to be used interntionally. When I received it, It's working fine, except the data network speed trough EDGE is too slow. As yo can see on the screenshot below I couldn't find the option to change the network type. and I'm stuck at "E" which mean EDGE.
http://s14.postimg.org/8r7vs0x27/Quick_Memo_2015_09_09_11_41_43_1.png
The phone's model is LG-D850 and it's running android 4.4.2 KitKat. it has no IMEI when I dial *#06# it shows IMEI: 0-05 on Settings/about phone/Status... it says IMEI: 0

Anyone here to help?

First, here are the possible reasons why you don't have an IMEI:
The phone was reported lost or stolen in the past.
The phone is still active on the owner's wireless carrier account.
There is money owed on the wireless carrier account to which the ESN/MEID/IMEI is connected.
For the reasons above, this community does not support such devices and you will probably not get any help.
But, this can also happen during a bad flash, so to fix the issue, you have 3 options:
Reset, unroot, then root and flash again
Try the suggested steps in this video
Find a company that can fix the problem by sending the phone to them

youngunix said:
First, here are the possible reasons why you don't have an IMEI:
The phone was reported lost or stolen in the past.
The phone is still active on the owner's wireless carrier account.
There is money owed on the wireless carrier account to which the ESN/MEID/IMEI is connected.
For the reasons above, this community does not support such devices and you will probably not get any help.
But, this can also happen during a bad flash, so to fix the issue, you have 3 options:
Reset, unroot, then root and flash again
Try the suggested steps in this video
Find a company that can fix the problem by sending the phone to them
Click to expand...
Click to collapse
Thanks for your reply, I'm not seeking to restore the IMEI. I just want to have the option to switch mobile network type. Should I root the phone and install a custom ROM?

AminhoVic said:
Thanks for your reply, I'm not seeking to restore the IMEI. I just want to have the option to switch mobile network type. Should I root the phone and install a custom ROM?
Click to expand...
Click to collapse
My bad, thought you wanted the IMEI back. In that case, the E (edge) is showing up could be due to Maroc Telecom throttling your connection or their towers could be far way (happens when you travel cross country too). Anyway, if you want to fiddle with network settings and try to get it to work BEFORE attempting to flash any ROM, try the following [3845#*855# 3845#*850#] USSD code from your stock dialer. You will get a hidden menu containing a juicy list of options and settings, so what you are probably looking for is the "LTE-Only" option (I am not sure though, but you can look through the settings).
And as always, attempt the suggestions AT YOUR OWN RISK.

youngunix said:
My bad, thought you wanted the IMEI back. In that case, the E (edge) is showing up could be due to Maroc Telecom throttling your connection or their towers could be far way (happens when you travel cross country too). Anyway, if you want to fiddle with network settings and try to get it to work BEFORE attempting to flash any ROM, try the following [3845#*855# 3845#*850#] USSD code from your stock dialer. You will get a hidden menu containing a juicy list of options and settings, so what you are probably looking for is the "LTE-Only" option (I am not sure though, but you can look through the settings).
And as always, attempt the suggestions AT YOUR OWN RISK.
Click to expand...
Click to collapse
I'm living at a major city, here the 4G works great. So yeah I have to change the mobile network type since it is on EDGE by defaut I guess.
I attemted the USSD code however it says "connection problem or invalid mmi code" after I hit dial. I have also tried a bunch of codes before but no luck.
I think I will falsh the phone that's the option left. I just have rooted the phone, then I will install TWRP and I will try to flash a ROM in it. What do youu suggest me to use from those ROMs posted here ?

AminhoVic said:
I'm living at a major city, here the 4G works great. So yeah I have to change the mobile network type since it is on EDGE by defaut I guess.
I attemted the USSD code however it says "connection problem or invalid mmi code" after I hit dial. I have also tried a bunch of codes before but no luck.
Click to expand...
Click to collapse
I get the same error if I use a third party dialer app (i.e., Dialer) until I tried the stock phone app.
I think I will falsh the phone that's the option left. I just have rooted the phone, then I will install TWRP and I will try to flash a ROM in it. What do youu suggest me to use from those ROMs posted here ?
Click to expand...
Click to collapse
I haven't flashed any custom ROMs on my LG, but from experience, each device somehow reacts differently to custom ROMs. For instance, I've flashed my S.G. Note (i717) over 30 times and some ROMs were stable at first then started having issues with them.
The best advice I can give you, is to pick a ROM from the list you posted and check the comments to see if it is stable or too many users have issues with it.

AminhoVic said:
I'm living at a major city, here the 4G works great. So yeah I have to change the mobile network type since it is on EDGE by defaut I guess.
I attemted the USSD code however it says "connection problem or invalid mmi code" after I hit dial. I have also tried a bunch of codes before but no luck.
I think I will falsh the phone that's the option left. I just have rooted the phone, then I will install TWRP and I will try to flash a ROM in it. What do youu suggest me to use from those ROMs posted here ?
Click to expand...
Click to collapse
Ever think that it does not have the correct bands for your carrier?

[HOW-To] Manual Program (SPR&VZW)

Well, Over the last few days I've seen more and more reports of "no service" and "unknown" service issues. Where you cant make or recieve calls, or text,and you are only getting data on lte.
" This will work to manual program a vzw phone also if you choose the one that has VZW.only in its name"
The LG LS997 V20 seems to have lost the ability to edit your PTN and MSID under ##786# method, and ive verified they also removed
##6DigitMSL# code. This eliminated the usual route to manually program your phone and get talk and text back without the network sending a update.
Heres the fix
Download Shortcut Master Lite From the playstore
Link here :
https://play.google.com/store/apps/details?id=org.vndnguyen.shortcutmaster.lite
and once downloaded you need to go to the search option and search
iot.cdmasettings
Then you need to click Launch on that one you searched..
Click:
CDMA PREFERENCES
Then:
NAM settings
Then Enter these things
MDN = Your Phone number
HOME SID = 4139
MCC = 310
MNC = 00
MIN2 = YOUR AREA CODE
MIN1 = MSID ( need to get from sprint or sprint.com chat ask for msid )
IMSI_MCC - 310
IMSI_MNC = 00
S2 = 000
S1 = 0001370
then back out and let it reboot,
for some this is a soft fix, for some this may be all you needed- it dosn't address the full issue, but this will at-least get you started to recovery.

Confirmed this worked on my LS997. Awesome Dev took several hours out of his day to troubleshoot this and get a fix.

screenshots added ++++ sorry text is small, i had to remove my personal info from the photos. Just use photos as reference for the text in op!
Hope this helps a few out, im still working on finding a 100% resolution to why this even came out as a issue. I'm almost certain your modem is NOT the issue, but a issue with provisioning and the way your phone is getting updated/or received a bad update
please continue to provide feedback and info related to when this 1st happens so i can figure out the main source.

stenomatic said:
Confirmed this worked on my LS997. Awesome Dev took several hours out of his day to troubleshoot this and get a fix.
Click to expand...
Click to collapse
Def worth the time man. You made it 10x easier being direct and following the info to the T.
EXACTLY what needed to be done for a positive resolution!
:good:

you can also go to the same place by searching msl.
and clicking the bottom one of the 2 that show up, click edit, and put in your ptn click okay the the full msid then okay. once done you need to reboot.

I don't think I'm having any issues other than I seem to experience more areas where I lose service than I did before I rooted.
When I searched for iot.cdmasettings - nothing came up.
I then searched for cdmasettings and again nothing came up.
I then searched for iot and a bunch of stuff came up. I noticed the 2nd. item from the top had iot/cdmasettings so I clicked that one.
My S1 is 0000375
I wonder if MSID is the same as MSL?
The link to the app above didn't work for me.
Try this one - https://forum.xda-developers.com/showthread.php?t=2800117
Jack

midmadn said:
I don't think I'm having any issues other than I seem to experience more areas where I lose service than I did before I rooted.
When I searched for iot.cdmasettings - nothing came up.
I then searched for cdmasettings and again nothing came up.
I then searched for iot and a bunch of stuff came up. I noticed the 2nd. item from the top had iot/cdmasettings so I clicked that one.
My S1 is 0000375
I wonder if MSID is the same as MSL?
The link to the app above didn't work for me.
Try this one - https://forum.xda-developers.com/showthread.php?t=2800117
Jack
Click to expand...
Click to collapse
No.. Your msid is a number sprint uses to provision.
I work for sprint.
Are you on sprint and using my rom?
This only applies to sprint users.

Team DevDigitel said:
No.. Your msid is a number sprint uses to provision.
I work for sprint.
Are you on sprint and using my rom?
This only applies to sprint users.
Click to expand...
Click to collapse
If you call or go online sprint will give you msl, and your msid
Msl is master susbsidy lock code (××××××) 6 digit
Msid is semilar to your phone number (×××-×××-××××)10 digit

Team DevDigitel said:
No.. Your msid is a number sprint uses to provision.
I work for sprint.
Are you on sprint and using my rom?
This only applies to sprint users.
Click to expand...
Click to collapse
The rom I am running is 5.0 or F I think I have seen it referred as. Not sure if it's yours but if it is - Thank You very much for all you have done for us poor left out sprint users. I downloaded a newer version (6.0) but not sure if I want to install it or if I'll gain anything.

midmadn said:
The rom I am running is 5.0 or F I think I have seen it referred as. Not sure if it's yours but if it is - Thank You very much for all you have done for us poor left out sprint users. I downloaded a newer version (6.0) but not sure if I want to install it or if I'll gain anything.
Click to expand...
Click to collapse
i would clean install version 6.5 phh
the majority of us are running it now.
Its stable and soild, and will pass safetynet,
im unsure why you dont have the hidden menu stuff, 6.5 phh should.
update to that and see if its any better.
we may need to get people to backup their radio and see what ones work better.
im on the oldest radio

I made a mistake. I was going to install F but ended up going with J.
6.5 PHH is all downloaded. I'll give it a try.
Thank You very much.

Can u check which version has the stuff to manually program 6.5 phh when i search and find iot.cdmasetting and hit launch in shortcut master it does nothing...
Edit
Nevermind the 6.5 isn't rooted to begin with...I had
A 6.01 back up that works fine
Sent from my LG-LS997 using Tapatalk

nexus6r3plicant01 said:
Can u check which version has the stuff to manually program 6.5 phh when i search and find iot.cdmasetting and hit launch in shortcut master it does nothing...
Edit
Nevermind the 6.5 isn't rooted to begin with...I had
A 6.01 back up that works fine
Sent from my LG-LS997 using Tapatalk
Click to expand...
Click to collapse
? both 6.5 versions have root, you must be dirty flashing or doing something else.
2 versions of 6.5 bud.
phh root witch is built into magisk,
and supersu root witch is a seperate app.
5.5 and 6.5 both are exactly the same, minus using magisk manager.

I didn't download phh app but it wouldn't request root on 6.5 so I just used a back up
Sent from my LG-LS997 using Tapatalk

nexus6r3plicant01 said:
I didn't download phh app but it wouldn't request root on 6.5 so I just used a back up
Sent from my LG-LS997 using Tapatalk
Click to expand...
Click to collapse
Didn't need any apps. Its built into magisk for root.
Thats the build im using as my daily. Root takes a min to setup as the 1st 15min after boot its still optimizing and doing commands.
Im 100% sure the no calls and text bug comes from using a aosp rom and changing nv info. Knocked me off service all day and didnt know.
Lost my ptn and my msid
Also got hit with a error code 16 and had to speak to the networks solution dept.

Maybe a tad bit more help...
I followed every step the only issue I've noticed is I can now make calls but only when I turn roaming on. If I just connect to the sprint network I get data but it says mobile network unavailable when trying to make a call. Any ideas?

kdouvia said:
I followed every step the only issue I've noticed is I can now make calls but only when I turn roaming on. If I just connect to the sprint network I get data but it says mobile network unavailable when trying to make a call. Any ideas?
Click to expand...
Click to collapse
Can you go under
settings
General
About
Status
What prl do you have?

Team DevDigitel said:
Can you go under
settings
General
About
Status
What prl do you have?
Click to expand...
Click to collapse
I have PRL 162. It's odd because I only receive calls and can make them if set to roaming. If I'm set to roaming to make calls I can't update PRL only when connected to just LTE

kdouvia said:
I have PRL 162. It's odd because I only receive calls and can make them if set to roaming.
Click to expand...
Click to collapse
Thats why, try a update prl and see if it changes. Do it on wifi if it dosnt work try on lte/3g
162 is not a sprint prl
you need PRL 54022 or 54xxx
any version really 54 whatever will work.
if prl update wont change it the only other idea would be
##diag# put into diag mode and use a tool like cdma workshop or similar to push the prl to your phone.
[email protected] is my hangouts email. We can speak more about this but talking about NV items and the tools that work with them
is a grey area on xda. I can not share my version of cdma workshop as its a paid for version linked only to my pc. There are free versions and tutorials out there on how to connect to a phone in diag mode and use cdma workshop or any other es tool to do the prl push

Team DevDigitel said:
Thats why, try a update prl and see if it changes. Do it on wifi if it dosnt work try on lte/3g
162 is not a sprint prl
you need PRL 54022 or 54xxx
any version really 54 whatever will work.
if prl update wont change it the only other idea would be
##diag# put into diag mode and use a tool like cdma workshop or similar to push the prl to your phone.
[email protected] is my hangouts email. We can speak more about this but talking about NV items and the tools that work with them
is a grey area on xda. I can not share my version of cdma workshop as its a paid for version linked only to my pc. There are free versions and tutorials out there on how to connect to a phone in diag mode and use cdma workshop or any other es tool to do the prl push
Click to expand...
Click to collapse
Thank you

HELP: LG Stylo 3 Plus - USSD/MMI codes?

First, Sorry if there is a thread already for this topic that i have not seen.
Ok, I have a LG Stylo 3 Plus with Metro PCS. Im having trouble with the ussd/mmi codes not working? Keeps saying, "Connection problem or invalid mmi code" . im trying every code i know. ##3282#, ##9090#, ect..ect..ive tried more than a few dozen and with no luck. I am Rooted and running Stock Rom. Any help would be Greatly Appreciated!
P.S. This is my first post!

***Update***
LeetMasta said:
First, Sorry if there is a thread already for this topic that i have not seen.
Ok, I have a LG Stylo 3 Plus with Metro PCS. Im having trouble with the ussd/mmi codes not working? Keeps saying, "Connection problem or invalid mmi code" . im trying every code i know. ##3282#, ##9090#, ect..ect..ive tried more than a few dozen and with no luck. I am Rooted and running Stock Rom. Any help would be Greatly Appreciated!
P.S. This is my first post!
Click to expand...
Click to collapse
*************
Update. 1.0
So i have came across the code for LG devices.
277634#*#
Has a bunch of hidden settings you can use. My data is now faster. Wifi connection is top notch now.
Hope this helps anyone.

LeetMasta said:
First, Sorry if there is a thread already for this topic that i have not seen.
Ok, I have a LG Stylo 3 Plus with Metro PCS. Im having trouble with the ussd/mmi codes not working? Keeps saying, "Connection problem or invalid mmi code" . im trying every code i know. ##3282#, ##9090#, ect..ect..ive tried more than a few dozen and with no luck. I am Rooted and running Stock Rom. Any help would be Greatly Appreciated!
P.S. This is my first post!
Click to expand...
Click to collapse
Hey bro how did you rot your lg. For metro. I've tried al most everything and mine wont

LeetMasta said:
*************
Update. 1.0
So i have came across the code for LG devices.
277634#*#
Has a bunch of hidden settings you can use. My data is now faster. Wifi connection is top notch now.
Hope this helps anyone.
Click to expand...
Click to collapse
What settings did you change? All I'm seeing in there is stuff that has to do with call quality and some testing things.

*#*#5773282#*#* into dialer pad...youll get your Data service menu! Your welcome.

LeetMasta said:
*#*#5773282#*#* into dialer pad...youll get your Data service menu! Your welcome.
Click to expand...
Click to collapse
Ok, I must be missing something, but what changes are you making to speed things up? I mean, I see a wall of menu there, sure...

Changes
So 5773282 in there you have some menus called "Data, data connection, data connections . have a peek into those. Also if you don't have hotspot go to tethering menu and check the Enable tethering box

LeetMasta said:
So 5773282 in there you have some menus called "Data, data connection, data connections . have a peek into those. Also if you don't have hotspot go to tethering menu and check the Enable tethering box
Click to expand...
Click to collapse
There are a bunch of settings under Tether. Nothing that looks like it'll enable it. I tried a few, and am still getting the "you're not subscribed to that' error

ixijimixi said:
There are a bunch of settings under Tether. Nothing that looks like it'll enable it. I tried a few, and am still getting the "you're not subscribed to that' error
Click to expand...
Click to collapse
try *#*#4636#*#* then, "set preferred network type" the drop-down menu. Not sure if this helps, but all i could come up with,