Related
I have a tablet called E tab 4.This tablet sell only in my country,so I couldn't any information about it in foreign forums.My problem is my tablet stuck in fastboot mode.I tried to push power button and vol up button same time 30 second but didn't help.And I tried to remove my battery and it didn't help either. I can't switch recovery mode or something like that.I tried to flash TWRP and orijinal recovery in fastboot mode but it didn't help.Gave me this error:Failed 'recovery' integrity check fail.How can I solve this?Please help me guys
Sorry for my bad English.I hope you understand my problem
Regards
alali44 said:
I have a tablet called E tab 4.This tablet sell only in my country,so I couldn't any information about it in foreign forums.My problem is my tablet stuck in fastboot mode.I tried to push power button and vol up button same time 30 second but didn't help.And I tried to remove my battery and it didn't help either. I can't switch recovery mode or something like that.I tried to flash TWRP and orijinal recovery in fastboot mode but it didn't help.Gave me this error:Failed 'recovery' integrity check fail.How can I solve this?Please help me guys
Sorry for my bad English.I hope you understand my problem
Regards
Click to expand...
Click to collapse
1. Install ADB and Fastboot drivers in your computer.
2. Connect phone to computer.
3. Browse to the location where you installed adb & fastboot and shift+right click on empty space and select 'Open command prompt here'.
4. To check if your phone is properly connected to fastboot mode in computer, type:
Code:
fastboot devices
5. To reboot your phone into Android system from fastboot mode, type:
Code:
fastboot reboot
GokulNC said:
1. Install ADB and Fastboot drivers in your computer.
2. Connect phone to computer.
3. Browse to the location where you installed adb & fastboot and shift+right click on empty space and select 'Open command prompt here'.
4. To check if your phone is properly connected to fastboot mode in computer, type:
Code:
fastboot devices
5. To reboot your phone into Android system from fastboot mode, type:
Code:
fastboot reboot
Click to expand...
Click to collapse
First of all thank you for ur fast answer but i already do what you say.I wrote before my tablet stuck fastboot mode.When I write fastboot reboot code in cmd,tablet restart but still fastboot mode.
Hi,
While I was trying to export the original ROM from one Huawei G620S to another and something went wrong.
On the phone I was trying to backup the ROM, I was using ADB, as I used the command "fastboot flash recovery twrp.img" after the reboot my phone locks up in fastboot & rescue mode.
I cannot access Recovery mode by pressing volume up + power button, it always boots in fastboot & rescue mode.
ADB does not recognise the device anymore.
I'm stuck and in need of assistance (it was my wifes phone, so I'm a gonner...).
If you have a solution, please make the explanation easy as I am not an expert.
Thank you
okidok said:
Hi,
While I was trying to export the original ROM from one Huawei G620S to another and something went wrong.
On the phone I was trying to backup the ROM, I was using ADB, as I used the command "fastboot flash recovery twrp.img" after the reboot my phone locks up in fastboot & rescue mode.
I cannot access Recovery mode by pressing volume up + power button, it always boots in fastboot & rescue mode.
ADB does not recognise the device anymore.
I'm stuck and in need of assistance (it was my wifes phone, so I'm a gonner...).
If you have a solution, please make the explanation easy as I am not an expert.
Thank you
Click to expand...
Click to collapse
Greetings and welcome to assist. Is this the twrp you were trying to flash ?
https://forum.xda-developers.com/android/development/twrp-t3120744
did you unlock your bootloader first and can you fastboot into recovery mode ?
Regards
Sawdoctor
did you unlock your bootloader first and can you fastboot into recovery mode ?
Click to expand...
Click to collapse
Yes I unlocked the bootloader with the code Huawei sent me.
No, I have no access to the Recovery mode anymore
I used twrp-2.8.7.0-trltexx
The device will only boot in fastboot & rescue mode.
Thanks
Hi, any ideas ?
Thank you.
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
thank you so much friend
Can you please make a video how to use Google camera in nubia red magic 3
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
Hello I'm interested in rooting the ZTE Axon 10 Pro 4g. Is it possible that the root process could be similar to this? I have not bought it yet, since I want to decide between ZTE Axon 10 Pro and Xiaomi Mi 9. If the ZTE Axon will be rootable im going to get it, if not im going for the Mi 9. I already asked the German customer support and they told me that it is possible, but they would not give any details on how to do it.
Will this root methode works with international model?
WhySoSeriousJoKer said:
Will this root methode works with international model?
Click to expand...
Click to collapse
I don't have international model. But i think it will works.
If you want to use cn rom with gapps then try this mathod.
My phone is corrupted and bootloops. Is there a file that I can use in EDL mode?
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
Sir..how to lock bootloader again if already in global rom asia version
I try in adb,it said locked but in setting developer option still show unlock
andixxx81 said:
Sir..how to lock bootloader again if already in global rom asia version
I try in adb,it said locked but in setting developer option still show unlock
Click to expand...
Click to collapse
First install cn rom. Then you unlock bootloader options
I want to know how can I lock the bootloader again, since i need to return this phone, it come with some issues, and if they see i touch that maybe they said that i break the warranty rules
Simple just install global or Chinese rom again ur then your bootloader lock again
sandeepkhatri said:
Simple just install global or Chinese rom again ur then your bootloader lock again
Click to expand...
Click to collapse
I have the international version, where can i get the international rom?
I also search global rom but not find. Hope anyone send global rom link
Global rom link
https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
Amazing!! thank you very much! I have one question, if i root my phone, I can unroot it using the original rom?
All I get is "Your Device is corrupt. It can't be trusted and will not boot."
Can some one share the europe & asia boot image which already patch by magisk. Tks
Sent from my ALP-L29
Has anyone been successful with this yet?
Working flawlessly?
Hello guys is there any way to relock bootloader?
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
Who is better in Red Magic 3/3S
I mean Android = 9/10/11 ?
lilo_ind said:
Who is better in Red Magic 3/3S
I mean Android = 9/10/11 ?
Click to expand...
Click to collapse
Look i use RM3S software but i have RM3 .. i feel that RM3S software smooth more than RM3 software .. look i see u stay on A10 till they fix all bugs in A11 .. its my point + Pubg not working in A11 for RM3/3S so if u playing on it don't use now A11
Edit: pubg worked u can download it from Here
I had problem about less charger mA on 3 charger and cables so strange on my red magic 3s, so yesterday i did buy another cable and same thing less mA like 100 should be 3000 , so i did use one charger adapter rampow for try , when i did put charger less again but the screen get blocked and reboot , when it restarted i did see that if i put to charger again also with orginal charger and cable will block screen and reboot so i did try to reset and install Europe & Asia: V212 , when did get 100% will show that " Device is corrupt. It can't be trusted and will not boot " ,this happen if you put one not original cable or charger i did discovery ,now the problem is if i put the cable on laptop for flash install roms windows will not detected the new hardware of red magic so how can i fix that now
cacaocaca said:
I had problem about less charger mA on 3 charger and cables so strange on my red magic 3s, so yesterday i did buy another cable and same thing less mA like 100 should be 3000 , so i did use one charger adapter rampow for try , when i did put charger less again but the screen get blocked and reboot , when it restarted i did see that if i put to charger again also with orginal charger and cable will block screen and reboot so i did try to reset and install Europe & Asia: V212 , when did get 100% will show that " Device is corrupt. It can't be trusted and will not boot " ,this happen if you put one not original cable or charger i did discovery ,now the problem is if i put the cable on laptop for flash install roms windows will not detected the new hardware of red magic so how can i fix that now
Click to expand...
Click to collapse
U tried the tool unbrick?
i can t do that because windows not recognized the phone , so i should get that before all but i did see some solution maybe and afther can i do all maybe
1. https://forum.xda-developers.com/t/q-bricked-and-not-recognized-by-usb.2280393/post-41531497
2. https://forum.xda-developers.com/t/...device-in-download-mode.1486234/post-22454863
And now maybe i did understand because have less charger also with the new cable maybe
cacaocaca said:
i can t do that because windows not recognized the phone , so i should get that before all but i did see some solution maybe and afther can i do all maybe
1. https://forum.xda-developers.com/t/q-bricked-and-not-recognized-by-usb.2280393/post-41531497
2. https://forum.xda-developers.com/t/...device-in-download-mode.1486234/post-22454863
And now maybe i did understand because have less charger also with the new cable maybe
Click to expand...
Click to collapse
Come pm
RZaR2001 said:
Come pm
Click to expand...
Click to collapse
Thankyou So much RZaR2001 i am glad to say that i successfully unbricked my NUBIA REDMAGIC 3 love you bro❤ No homo
m device is not recognized in my pc i also tried using different laptops so i cant go any more from step 2....and i dint even enable usb debugging is there any way i can enable it from hardbrick mode(currupted stage)
help me please.....
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
This man is sooooo Goooood Thankyou soomuch For helping me and other people out there. This man will give it his time to help and fix my iisue he's actually handsome tho. So i recommend this guy if you want some solution for your problem just direct him. This man is sooooo kind it will make your day much happier hahaha
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
after flash v3.30 device logo restart only
[email protected] -help me bro
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
this man is really awsome for red magic device. now im on v5.11 and using gapps. thnx again
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
Hi
I habe redmagic 3 stuck at device corrupted
I have tried almost every guide i could
Its still same
I tried your way and now it keeos booting back to fastboot
Even if i choose reboot to recovery or reboot to system after i use twrp tool
Any suggestions?
hafizrehman1992 said:
Hi
I habe redmagic 3 stuck at device corrupted
I have tried almost every guide i could
Its still same
I tried your way and now it keeos booting back to fastboot
Even if i choose reboot to recovery or reboot to system after i use twrp tool
Any suggestions?
Click to expand...
Click to collapse
Pm me
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
OMG guys
this guy in an angel
within sometime of me posting here for help
he Contacted me through pm
and then we started conversation through whatsapp
he took details of how i got myself stuck
and then through anydesk
downloaded some files and viola
my device is running again
on cn version 5.11 android 11
rooted and with gapps installed
i can't thank you enough brother
god bless you
please guys
give a like to this post
and applaud for his generosity that when i offered to pay him he said he is gona do it for free
Thanks a lot
i wud be forever your thankful
lotz of love n prayer from me❤♥♥♥♥♥♥♥
hafizrehman1992 said:
OMG guys
this guy in an angel
within sometime of me posting here for help
he Contacted me through pm
and then we started conversation through whatsapp
he took details of how i got myself stuck
and then through anydesk
downloaded some files and viola
my device is running again
on cn version 5.11 android 11
rooted and with gapps installed
i can't thank you enough brother
god bless you
please guys
give a like to this post
and applaud for his generosity that when i offered to pay him he said he is gona do it for free
Thanks a lot
i wud be forever your thankful
lotz of love n prayer from me❤♥♥♥♥♥♥♥
Click to expand...
Click to collapse
i want to do the exact same solution but i have bricked my rm3 with a downgrade. now my best problema is that pc not recognized the Phone on fastboot. i'm demoralized...
fedezio said:
i want to do the exact same solution but i have bricked my rm3 with a downgrade. now my best problema is that pc not recognized the Phone on fastboot. i'm demoralized...
Click to expand...
Click to collapse
I also had that issue and i fixed it recently,
Just go to a mobile shop tell them to try to unlock bootloader step while connected to a box like miracle, ultimate where any of red magic series phone available.
After that the result got failed but phone starting recognizing in fastboot mode.
Thnx me later.
Thank you for your enthusiastic help. My phone came back to life
Bro around 15-20 days back I was on global rom, as it was not receiving any update lately thought to install cn android 11 rom. After installing the rom I was unable to find any twrp for it so, I downgraded it to android 10 cn rom, but my phone got bricked. I thought there might be some issue with recovery so I did a fresh install following:
Using cn android 11 rom
Using brioli
Extracted the sdat2img.py system.transfer.list system.new.dat system.img
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase system
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
fastboot flash vbmeta vbmeta.img
fastboot flash -S 100M system system.img
fastboot reboot
It showed device corrupt again
I tried unbrick tool and the twrp you uploaded.
But after installing the twrp, when I try to reboot to recovery, it reboots in fastboot again.
I have tried at least 10-11 times with the above process but no luck.
Please help me out bro this is my only phone and we don't have a service center here.
Best regards,
Dibyank
Dibyank said:
Bro around 15-20 days back I was on global rom, as it was not receiving any update lately thought to install cn android 11 rom. After installing the rom I was unable to find any twrp for it so, I downgraded it to android 10 cn rom, but my phone got bricked. I thought there might be some issue with recovery so I did a fresh install following:
Using cn android 11 rom
Using brioli
Extracted the sdat2img.py system.transfer.list system.new.dat system.img
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase system
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
fastboot flash vbmeta vbmeta.img
fastboot flash -S 100M system system.img
fastboot reboot
It showed device corrupt again
I tried unbrick tool and the twrp you uploaded.
But after installing the twrp, when I try to reboot to recovery, it reboots in fastboot again.
I have tried at least 10-11 times with the above process but no luck.
Please help me out bro this is my only phone and we don't have a service center here.
Best regards,
Dibyank
Click to expand...
Click to collapse
Pm me
I've been using an Asus Rog Phone 5 for some time now and I really like it. Original WW version. Unlocked bootloader and installed magisk without major hurdles. I could carry over root by patching boot image in the inactive slot in case of a new firmware version.
I've just tried to upgrade from Magisk 23.0 to 24.1 and unfortunately it didn't installed itself into the boot image. I assumed I have to repatch the boot image using the new magisk and reflash. I extracted the boot image from the payload and patched it successfully in magisk app.
Now I have a problem accessing the phone in fastboot mode. I have no problem entering fastboot mode: first entering the bootloader and selecting fastboot mode. However I see no activity over the USB port and the phone is not recognized by the computer (either from windows or linux). If I boot into the system I can see the phone in adb mode. It responds and I can issue commands - for example boot the bootloader. But no signs of traffic in fastboot mode.
Am I missing something? How I may flash an image if I cannot access the phone in fastboot mode? Please let me know if you have any ideas how to solve this situation.
Thanks: Dw.
Don't enter Fastboot (Fastbootd) from the bootloader,Just boot into bootloader and try sending Fastboot commands from there. If you're connection & drivers are in good shape, you should be sorted...
use the side port to communicate with the phone in fastboot mode.
yurishouse said:
use the side port to communicate with the phone in fastboot mode.
Click to expand...
Click to collapse
I'm officially an idiot. Thanks for the heads up...
Andrologic said:
Don't enter Fastboot (Fastbootd) from the bootloader,Just boot into bootloader and try sending Fastboot commands from there. If you're connection & drivers are in good shape, you should be sorted...
Click to expand...
Click to collapse
I tried to use the wrong port - and I'm banging my head against the wall...