Stucked in recovery mode - General Questions and Answers

My phone is oppo f3... it had fallen down and since then it has stucked on the recovery mode ... i tried installing CPH1609EX_11_OTA_0180_all_201709280719.ozip
Through a SD card but it comes with an error saying this version is lower than the current version.
I had downloaded the color OS version from the website but it is not the latest version
I am not able to do anything
Please provide me with some help
Please reply as soon as possible
(this is not a rooted phone)

Can you factory reset? Maybe talk to me with discord because I am not very active on the forums https://discord.gg/KjPCvGb

Related

Issues with my dell streak

i have tried the way of flashing streakMod recovery image as specified and ran the provided commands aswell and did everything exactly to the point yet when i select option 2 i.e., "software upgrade via update.pkg on sd card " it takes a while but comes up with the screen
" the android system utility - GAUSB1A135100
to perform an emergency software recovery . you will need to
insert a micro SD card containing an update file. (/sdcard/update.pkg)
to download an update and for future instructions, visit
http ://support.dell.com
hold the up volume button to reboot the phone."
i also tried renaming the package to update.pkg yet it boots into the screen as though its taking an update and says signature verification failure and then again reboots to the phone to my froyo 2.2.2
currently
the baseband im using is : GAUSB1A135100-AWS
Kernel version : 2.6.32.9-perf
build : 15609
unfortunately i cannot take screenshot of my mobile screen.
please guide me in the correct direction as to what need to be done furthur as i have tried the clockworkMod recovery and ROM manager and streakMod revovery too.
any help would be much appreciated as i am trying to upgrade a custome ROM of longhorn 2.9.1 and its been 4 days now i keep circelling around for a break through.
Regards,
Moid.
solution
mamoid said:
i have tried the way of flashing streakMod recovery image as specified and ran the provided commands aswell and did everything exactly to the point yet when i select option 2 i.e., "software upgrade via update.pkg on sd card " it takes a while but comes up with the screen
" the android system utility - GAUSB1A135100
to perform an emergency software recovery . you will need to
insert a micro SD card containing an update file. (/sdcard/update.pkg)
to download an update and for future instructions, visit
http ://support.dell.com
hold the up volume button to reboot the phone."
i also tried renaming the package to update.pkg yet it boots into the screen as though its taking an update and says signature verification failure and then again reboots to the phone to my froyo 2.2.2
currently
the baseband im using is : GAUSB1A135100-AWS
Kernel version : 2.6.32.9-perf
build : 15609
unfortunately i cannot take screenshot of my mobile screen.
please guide me in the correct direction as to what need to be done furthur as i have tried the clockworkMod recovery and ROM manager and streakMod revovery too.
any help would be much appreciated as i am trying to upgrade a custome ROM of longhorn 2.9.1 and its been 4 days now i keep circelling around for a break through.
Regards,
Moid.
Click to expand...
Click to collapse
follow the link for answers : http://forum.xda-developers.com/showthread.php?t=1836662

Please Help me Starting My Nexus S GT I-9020

Dears
Recently I rooted my nexuys s GT -i9020 , and also installed touch clockwork mode recovery . today i was installed one software and I am granted superuser permission to him, the name of the software is forgotten from me, but when I opened that software my phone is restarted and hanged on Google's logo startup screen.
THEN I WIPED ANY THING ON MY NEXUS S, SUCH AS FACTORY DATA RESET, AND USB STORAGE AND FORMAT SYSTEM ETC
I also completely formatted all the data on my phone and
Now when I am pushing the power button it directly going to recovery mode and the option on my screen are.
FASTBOOT MODE - NO BOOT OR RECVOERY IMG
PRODUCT NAME - HERRING
HW VERSION - REV 11
BOOTLOADER VERSION - I9020XXLC2
BASEBAND VERSION - I9020XXKL1
CARRIE INFO - KIT
SERIAL NUMBER - 3035C767C6600EC
LOCK STATE - UNLOCKED
SELECT - VOLUME UP OR VOLUME DOWN
EXCUTE - POWER
Please help Me that how to solve this problem, and also tell me that if there is easiest method to install kitkat on my phone because this is my dream to see kitkat 4.4.2 on my nexus s GT -I9020
AND ALSO SHARE ME SPECIFIC USB DRIVERS OF THIS PHONE ,
THANKS
REGARDS!!!!!!!!!!!!!!!!!!!!!!!!
http://www.droidviews.com/nexus-s-guide-unlock-bootloader-root-install-custom-recovery-custom-roms/
I visited this site many times but this website is not helpful for me because there is no link to download custom roms, And also I dont know that what type of ROM is suitable for me please share a good custom Rom for me and also method of installing custom Rom .
I will be very thankful to you
Download Nexus Root Toolkit if you're too lazy
Please close this thread
My problem is Solved Thanks XDA Team
I was Installed CM10.2 And nice working for me
THANKS AND REGARDS
ALL CREDIT GOES TO XDA TEAM!!!!!!!!!!

Please Help URGENT!!!

I am not sure what happened to my device I accidentally deleted a system file and many other files like boot and cust I don't know what I was thinking. And now my device keeps restarting and just goes into the screen where it says "Huawei Ascend Mate 7" and keeps restarting on the same scree. So I tried installing a custom rom and that didnt work, I tried to reinstall the backup I made and it kept doing the same thing I saw a thread with a ot so diffrent issue and I tried the method but it didnt work. So please Help me ASAP The advantage is that my phone bootloader is unlocked and I have CMW Recovery menu. SO if there are any methods of fixing my phone and installing the official system update please help me would really be appreciated.
My phone Is a "Mate 7" "Amber Gold" "32GB ROM" "3GB RAM" "Model-TL10"
B-Jimmy said:
I am not sure what happened to my device I accidentally deleted a system file and many other files like boot and cust I don't know what I was thinking. And now my device keeps restarting and just goes into the screen where it says "Huawei Ascend Mate 7" and keeps restarting on the same scree. So I tried installing a custom rom and that didnt work, I tried to reinstall the backup I made and it kept doing the same thing I saw a thread with a ot so diffrent issue and I tried the method but it didnt work. So please Help me ASAP The advantage is that my phone bootloader is unlocked and I have CMW Recovery menu. SO if there are any methods of fixing my phone and installing the official system update please help me would really be appreciated.
My phone Is a "Mate 7" "Amber Gold" "32GB ROM" "3GB RAM" "Model-TL10"
Click to expand...
Click to collapse
Looks like you're gonna have to flash the stock recovery and reinstall the stock firmware to get it fixed.
I had a similar problem and going back to (more or less) the phone's factory setup was the only solution.

Please help - bricked my beloved phone

Hello everyone,
Well I was on KK and had my phone rooted and was happy - then like a fool I downloaded and installed the official Lollipop update through the phone interface.
Now the phone will only reboot into 'PhilZ touch 6' recovery and even restoring a previous recovery backup is having no effect.
I cant get the phone into download mode so cant install a kdz file to reset the phone. Also there is no option in recovery to launch the phone in download mode.
Please please please does anyone have any ideas?
I love this phone and cant afford to buy a new one. I'm having one of those days today.
Well I got it working by following the advice from here:
http://forums.androidcentral.com/ge...cked-lg-g2-stuck-twrp-no-download-mode-4.html
Posted in case it can help someone else

Bricked MTCD MX unit after upgrade rom

Hi,
My device,
Mtcd Mx
A-Media
Rk3188
Lollipop 5.1.1
i upgrade my Hu from 1.3 @hal9k to hal9k’s 7.1.2 nougat, everything went fine. Bootup successfuly. While looking settngs page “power off” warning came and after that restart it self, then stuck on nougat logo. Nothings happening just stuck. After i manage a sdcard with sd firmwaretool to downgrade 5.1.1 with stock 5.1.1 dupdate file. Hu stuck on lollipop boot logo no matter what i do.
Things that i tried
With @hal9k 7.1.2 bootable sdcard i can get into Nougat recovery menu, tried clean wipe cash, factory reset options and finally update again, there is no solution still stuck nougat logo.
With stock rom(5.1.1) bootable sdcard i cant get into lollipop recovery menu. Stuck on lollipop boot logo. Tried eject the sdcard as soon as possible when lollipop appears many time, doesnt work.
i never update dmcu, it is same as it was.
İ thing it is bricked, please ineed some advice, i m very sorry for beeing such despered
Edit: i apply this method to flash som with;
1- stock dupdate.img. Flshing succesful but stuck on boot again.
2- flash with sdupdate file of stock dupdate.img. Flashing succesfull but stuck on boot again.
Tried both files doesnt work. İ cant even get in recovery mode.
https://forum.xda-developers.com/and...h-som-t3766892
————
İ thing i need to try flash mcu and will buy a stlink adaptor. Try to flash mcu soon.
Any recommendation?
Edit2; (day2)
i can still get into recovery menu with hal9k 7.1.2 nougat sdcard,
But sdcard with stock rom still doesnt get into recovery mode.
------------------------------
Still there isnt any advice, waiting for your
edit3:
installed ubuntu to laptop
used rkflashkit and upgrade_tool
erase all nand partitions one by one with rkflashkit
lowformat by upgrade_tool
upgrade firmware by upgrade_tool
still no change on condition.
all succeed but on loader i get following error on ubuntu, but on windows didnt give error.
error was
[email protected]:~/utils$ sudo ./upgrade_tool ul loaderr.bin
[sudo] password for erhan:
Loading loader...
Loading loader failed!
Click to expand...
Click to collapse
but as i sad i use windows android tool for flash loader with no error.
is it hard bricked?
——————————————
Edit 4;
i flash the mcu by stlink method,
Success fully flashed mcu chip.
Conclution;
Nothing changed, it doesnt work no matter i do.
This is my last post about unbricking operation.
İ gave it to dealer this morning, they will send it repair. i will write the conclution.
will it live or die? Coming soon!
Many many thanks to everyone who read entire post
Vote your guess down here, will it came back to life or die and rest in peace
Need advice
Sadece_erhan said:
Need advice
Click to expand...
Click to collapse
Would demanding it motivate others to help?
What have you tried and from reading the forums, identified what the options might be?
marchnz said:
Would demanding it motivate others to help?
What have you tried and from reading the forums, identified what the options might be?
Click to expand...
Click to collapse
i dont understand why it always gets in recovery mode with the sdcard which already bricked the unit.
understandings from readings
it doesnt get into recovery mode because it stucks or something went wrong on previous update.
To get in recovery i remove som from board, prepare a cable with 10k and 20k resistors. measure 3.2v from cable. And attach the usb cable pins to som’s related pins. Pc recognise the som, run the rk tool app, load stock 5.1.1 rom. And click restore button, succeed the restore succesfully. Plug the som back to board, push the reset button. it stuck on boot lollipop logo again. İ i tried to restore both dupdate.img and sdupdate.img by one by. Doesnt work.
The only thing that work is the hal9k’s nougat 7.1.2 rom’s sdupdate.img. İt takes recovery menu, i can wipe data, wipe cash , update mcu and update firmware. (Update firmware option only updates nupdate 7.1.2 version which is stuck on boot logo again)
i will flash mcu tomorrow by stlink method. i think mcu is fine. it wont work again.
İ create sdcards with Rockchip Create Upgrade Disk Tool v1.46 (SDBOOT 2.12)
update,
remove som, take it to maskrom mode.
with tool androidtool 2.3
eraseflash
lowerformat
upgrade firmware.
it doesnt work still.
i guess i need fully erase nand partitions and make it as virgin . but how?
installed virtual machine and ubuntu to fix by rkflashkit but, it cant recognise usb

Categories

Resources