as the title says , am getting a network signal in the status bar with no sim card installed in the device , where it used to show a stop or block sign before when there is no sim installed , don't know when it started but i have noticed it a week ago , and am on the 5.1.1 update ,
what i have tried so far :
1 - reset the device from the setting .
2 - reset the device with samsung smart switch for windows ( which download the latest firmware for the device & install it ) .
3 - installed the factory firmware with odin , and got the device to axiom telecom which is my warranty service provider , and the told me the have changed the whole motherboard , & after telling them the issue is still there , they showed me another s6 with no sim and there is signal and told me that this behavior is normal ( which i don't think so ) .
4 - contacted samsung directly by phone & email , and they told me to reset the device or send it to service ( which i already did ) .
so , is this behavior really normal ? are any of you guys getting this ?
my device : SM-G920F
country : Saudi Arabia
no its not normal
if you type *#06# you gonna find IMEI become 3500000000006/01
if it is then you cant make calls or send sms ( not registered on network )
its the same problem like me i don't know where this come from but we need some one to give us backup the EFS folder. to restore it back to the phone SM-G920F
please if some one can help us thank you
tazaga said:
no its not normal
if you type *#06# you gonna find IMEI become 3500000000006/01
if it is then you cant make calls or send sms ( not registered on network )
its the same problem like me i don't know where this come from but we need some one to give us backup the EFS folder. to restore it back to the phone SM-G920F
please if some one can help us thank you
Click to expand...
Click to collapse
no , it seem we are having different problems ,
*#06# reveals normal IMEI ,
and i can make & receive phone calls & sms if i install a sim card ,
try resetting yours to stock ,
other than showing a signal with no sim card installed the phone is fine & doesn't have any problems .
Speculation- you'd need emergency service call? I would assume that it's allowed to connect to network for that and not have phone disabled?
More speculation- your being spied on...
-Spy
It's only a display icon. You aren't able to still make a regular call without the sim? If it ain't broke don't fix it.
But to ease your mind just check the network status in your settings. Should say what connected to.
Surely it does have to do with the update itself if your phone still functions as normal.
I'm sure there is a network status with the super secret spy codes that you enter on your dial pad. You know the #secretrandomnumber#* codes...
Sent from my SM-G920W8 using XDA Premium 4 mobile app
space_eyes said:
Speculation- you'd need emergency service call? I would assume that it's allowed to connect to network for that and not have phone disabled?
More speculation- your being spied on...
-Spy
It's only a display icon. You aren't able to still make a regular call without the sim? If it ain't broke don't fix it.
But to ease your mind just check the network status in your settings. Should say what connected to.
Surely it does have to do with the update itself if your phone still functions as normal.
I'm sure there is a network status with the super secret spy codes that you enter on your dial pad. You know the #secretrandomnumber#* codes...
Sent from my SM-G920W8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
it could be there for emergency calls ,
in terms of being spied on , ha ha ,i don't think so , the service center changed the entire motherboard which include the eMMC with it's whole partitions .
the sim card status in the settings says Not Available for everything , and yes i can't make calls nor sms without the sim ,
but you still didn't answer my question : do you get this when you remove your sim ?
no one with a similar problem ??
I've seen it on lots of Samsung phones. It's simply a signal for emergency calls. You have to be able to make emergency calls with or without a Sim and that's telling you how much signal you have.
Seriously people this is pretty simple and no conspiracy.
You only get a circle with a line through if you have a sim card installed that is blocked from the network or the phone is stolen / blocked etc.
Jonathan-H said:
I've seen it on lots of Samsung phones. It's simply a signal for emergency calls. You have to be able to make emergency calls with or without a Sim and that's telling you how much signal you have.
Seriously people this is pretty simple and no conspiracy.
You only get a circle with a line through if you have a sim card installed that is blocked from the network or the phone is stolen / blocked etc.
Click to expand...
Click to collapse
good to hear ,
what made me think it isn't ordinary thing is that the service center didn't know about it & thought it was a problem ,
thanks a lot .
This was done on last update Samsung gods thought we needed to know how much of a signal we had for emergency calls
Having the same problem with my samsung galaxy s6 SM-920F. showing bars on the signals even without sim. not connecting to network operator as well. showing Disconnected status in SIM status from About.
Tried updating the software even downgrading, factory reset and wiping cache but nothing worked.
Found this thread when looking for an answer to this question. In my case, it is a tablet that hasn't even got a sim option but still has the mobile network signal showing, even when airplane mode is switched on. Just worry it is eating some of my battery life. Any ideas?
I am also getting same problem.
There is no sim card inserted in my phone but still it shows the network bars.. Your And my problem is same.
There, an actual answer. Guess I should add it here since I wondered the same thing
a sim card has nothing to do with the transceiver system of the phone. its literally a "passkey" it is your authentication to USE that network. ie you can always SEE the network you just not allowed to "use it" without permission hence the simcard.
Click to expand...
Click to collapse
Hi all. I just bought a S10e (G970U, Snapdragon) from China in order to use it in Spain, with Orange as a carrier. Once I set it up, everything worked fine for about 20 seconds. After that, the mobile data locked down. When I try to turn it up again the device says: "Security policy prevents use of mobile data". I tried to factory reset it several times, try different google accounts, try different SIMs, erase the data from some SIM- and network-related apps, but nothing changes. I guess that this has something to do with Samsung Knox.
What should I do? Is recommendable to contact Samsung support? Can I flash another firmware/ROM that fix this issue? Thanks a lot, any help is appreciated.
PS: Calls and SMS are also locked.
@txordi
Maybe this will help?
https://www.samsung.com/nz/support/mobile-devices/security-policy-updates/
djg269 said:
@txordi
Maybe this will help?
https://www.samsung.com/nz/support/mobile-devices/security-policy-updates/
Click to expand...
Click to collapse
Hi. Thanks a lot for your help! I tried it and nothing changed. Indeed, the security policies were already updated out of the box...
I had the same problem. I had a signal but could not send/receive SMS or calls. After talking with carrier tech support and Samsung, I went to a UbreakIfix store, where they told me the 10e phones have a problem with the antenna on the motherboard. They said I needed to send the phone back to Samsung to get the mobo replaced. I just sent it back to the seller and bought an S20.
Also on S10+
I'm having the same problem on my GM-975U1 S10+. Basically mobile data and texting works long enough to authenticate into the Samsung account during setup, but once the android home screen appears after finishing the setup I can't place any calls and trying to enable mobile data gives a "Security policy prevents use of mobile data" error when attempting to enable it. Neither AT&T or Samsung have given instructions on how this can be fixed. It's behaving similarly to if the phone's IMEI were on a blacklist, but I get immediately shut out once the setup process completes.
kriegersaurusrex said:
I'm having the same problem on my GM-975U1 S10+. Basically mobile data and texting works long enough to authenticate into the Samsung account during setup, but once the android home screen appears after finishing the setup I can't place any calls and trying to enable mobile data gives a "Security policy prevents use of mobile data" error when attempting to enable it. Neither AT&T or Samsung have given instructions on how this can be fixed. It's behaving similarly to if the phone's IMEI were on a blacklist, but I get immediately shut out once the setup process completes.
Click to expand...
Click to collapse
have you found any solution yet I am having same issue with my samsung s10e and I don't even understand what app or policy is preventing me from making calls. BTW I am using clean esn phone. As soon as I pass the setup screen LTE signal goes away and it stops working.
aakashpsp said:
have you found any solution yet I am having same issue with my samsung s10e and I don't even understand what app or policy is preventing me from making calls. BTW I am using clean esn phone. As soon as I pass the setup screen LTE signal goes away and it stops working.
Click to expand...
Click to collapse
I haven't found one yet either. Apparently the phone I purchased is locked to Tracphone after paying for an IMEI lookup (got scammed by an ebay seller who said it was the unlocked model), and the phone isn't able to do calls/mobile data properly except during the initial setup. Tried with SIM cards from two different US providers that both aren't working on it, and can connect to wifi just fine. Can see in the phone information test menu by dialing *#*#4636#*#* that my sim is being recognized, shows my phone number and IMSI, can switch between network types and see the cell towers it connects to; but isn't able to send/receive calls or mobile data. It fails the Ping test with 'Fail(2)' and HTTP Client Test with 'Fail: IOException'.
It's also showing that the phone receives a call inside of the Service Mode menu by dialing *#197328640# and going to '[1] BASIC INFORMATION'. Placing a call from another phone shows that my S10+ is picking up LTE bands and has some RF parameters that change when my number is being dialed, but don't get the option to pick up the call. It's also able to detect that I have a voicemail but am not able to dial in and listen to it. The Tx Pwr says '-- dBm' so I ultimately can't tell if it's a software or a hardware problem.
kriegersaurusrex said:
I haven't found one yet either. Apparently the phone I purchased is locked to Tracphone after paying for an IMEI lookup (got scammed by an ebay seller who said it was the unlocked model), and the phone isn't able to do calls/mobile data properly except during the initial setup. Tried with SIM cards from two different US providers that both aren't working on it, and can connect to wifi just fine. Can see in the phone information test menu by dialing *#*#4636#*#* that my sim is being recognized, shows my phone number and IMSI, can switch between network types and see the cell towers it connects to; but isn't able to send/receive calls or mobile data. It fails the Ping test with 'Fail(2)' and HTTP Client Test with 'Fail: IOException'.
It's also showing that the phone receives a call inside of the Service Mode menu by dialing *#197328640# and going to '[1] BASIC INFORMATION'. Placing a call from another phone shows that my S10+ is picking up LTE bands and has some RF parameters that change when my number is being dialed, but don't get the option to pick up the call. It's also able to detect that I have a voicemail but am not able to dial in and listen to it. The Tx Pwr says '-- dBm' so I ultimately can't tell if it's a software or a hardware problem.
Click to expand...
Click to collapse
I am facing the same exact issue my sim number it shows inside the phone and signal I am getting is in negative dbm also my sim receives calls during the initial setup and as soon as the setup completes the LTE network goes away call gives error " call not sent". I am irritated by this now and there is no root available for this model so I cannot flash any custom rom to check. I have seen many people have same issue but no solution yet.
If your phone locked to a particular network, ie TracFone,AT&T, TMobile, Cricket, etc, then that is only network it will work on. Doesn't matter what custom ROM you use. You will need to get the network unlock code either from the network it's locked to or from a reputable online unlock site. Good luck getting it unlocked.
riggerman0421 said:
If your phone locked to a particular network, ie TracFone,AT&T, TMobile, Cricket, etc, then that is only network it will work on. Doesn't matter what custom ROM you use. You will need to get the network unlock code either from the network it's locked to or from a reputable online unlock site. Good luck getting it unlocked.
Click to expand...
Click to collapse
my device is already unlocked. It is not an unlocked phone issue. This is some stupid policy which is preventing from making calls or using data. Maybe this policy is saved in EFS don't know.
aakashpsp said:
my device is already unlocked. It is not an unlocked phone issue. This is some stupid policy which is preventing from making calls or using data. Maybe this policy is saved in EFS don't know.
Click to expand...
Click to collapse
That's strange, it's acting exactly like a network locked device. When you say it's unlocked, are referring to the bootloader or network? Did you buy it new, unlocked from a reputable dealer? Check the firmware and make sure it is unlocked. There are other thread here with the same issue and message, those are all network locked phones.
riggerman0421 said:
That's strange, it's acting exactly like a network locked device. When you say it's unlocked, are referring to the bootloader or network? Did you buy it new, unlocked from a reputable dealer? Check the firmware and make sure it is unlocked. There are other thread here with the same issue and message, those are all network locked phones.
Click to expand...
Click to collapse
I don't know I bought it from mercari that seller told me it is tmobile unlocked, but while checking I found the model number is G970U1. csc is XAA and binary U4. Bootloader is locked. Networks seems to be unlocked as when I put it my sim card it works till initial setup screen and then stops working. I searched it maybe locked to Consumercellular but is there any way I can unlock it ? I didn't find anything online.
Sounds like the seller lied to you.
Is there any way to unlock CC device ? I am on Binary u4. I am able to flash both g970u and g970u1 firmware but no success.
riggerman0421 said:
That's strange, it's acting exactly like a network locked device. When you say it's unlocked, are referring to the bootloader or network? Did you buy it new, unlocked from a reputable dealer? Check the firmware and make sure it is unlocked. There are other thread here with the same issue and message, those are all network locked phones.
Click to expand...
Click to collapse
My S10+ model G975U is network unlocked, with the bootloader locked. I bought a network unlock code, but am getting the same behavior where the intial setup allows me to sign into my Samsung account when putting in both an ATT and T-Mobile sim card. I've also tried reflashing it with several different firmwares both carrier locked and unlocked, but this phone has been sitting in my drawer for the past month since it's unusable. Probably will end up trading it in since I was scammed by the random ebay seller I bought this from.
kriegersaurusrex said:
My S10+ model G975U is network unlocked, with the bootloader locked. I bought a network unlock code, but am getting the same behavior where the intial setup allows me to sign into my Samsung account when putting in both an ATT and T-Mobile sim card. I've also tried reflashing it with several different firmwares both carrier locked and unlocked, but this phone has been sitting in my drawer for the past month since it's unusable. Probably will end up trading it in since I was scammed by the random ebay seller I bought this from.
Click to expand...
Click to collapse
I'm having the exact same issue. Bought s10+ off ebay for 200 locked to consumer cellular. Bought an unlock code. It said unlock successful. Now get this error with any sim. It will show lte during initial setup only.
It will show that it's at&t or verizon when I put the sim in and populate the proper apn settings.
Before the unlock I would get the sim not provisioned error.
I did have to look up the dial code to make the unlock code window appear.
Now i can't actually use any service and i get the security policy error.
Finally was able to find the xaa firmware which seems to be the exact firmware on it.
Then lash that as no other u1 firmware would flash.
txordi said:
Hi all. I just bought a S10e (G970U, Snapdragon) from China in order to use it in Spain, with Orange as a carrier. Once I set it up, everything worked fine for about 20 seconds. After that, the mobile data locked down. When I try to turn it up again the device says: "Security policy prevents use of mobile data". I tried to factory reset it several times, try different google accounts, try different SIMs, erase the data from some SIM- and network-related apps, but nothing changes. I guess that this has something to do with Samsung Knox.
What should I do? Is recommendable to contact Samsung support? Can I flash another firmware/ROM that fix this issue? Thanks a lot, any help is appreciated.
PS: Calls and SMS are also locked.
Click to expand...
Click to collapse
I'm from the Philippines and my niece phone is network lock ( Smart Telecom ) I can use the sim 2 slot since it's a dual sim using another network Simcard, unfortunately, it won't allow me to use mobile data so I tried unlocking it *#272*IMEI FROM SIM 1 SLOT# so I choose GLB for globe network or XTC to openline so here's what happens, it got reset so upon set up yeah other sim works have data but when finish setting up everything I can use data again on other network and a message pop up
Security policy prevents use of mobile data
so I guess even it allows other network Simcard on network lock phone it needs to be unlocked by the network where it was lock
Did anyone ever find a solution to this problem?
I'm having the exact same problem with a new samsung s10e I just bought. Security policy prevents use of mobile data, and no calls or sms will go through. LTE shows on setup, but disappears as soon as setup is complete.
I initially assumed the phone was locked, but the seller is reputable and insists it is unlocked. It's also a U1 model, and an IMEI lookup appears to show that it's unlocked. In connection settings under mobile networks, i'm also able to select multiple carriers, so I'm inclined to believe that the device really is unlocked.
Anybody here ever manage to solve this problem, or am I SOL? I would hate to be out 200 bucks on this phone since i'm past the return window.
I am having same isuue with samsung not S20 ultra (SM-N986U1) I bought the mobile and its unlocked the seller send to me photo for the check screen and its open USA but can not use mobile data and make any calls when a make a call the call ended and give me screen call not sent
aniratepanda said:
Did anyone ever find a solution to this problem?
I'm having the exact same problem with a new samsung s10e I just bought. Security policy prevents use of mobile data, and no calls or sms will go through. LTE shows on setup, but disappears as soon as setup is complete.
I initially assumed the phone was locked, but the seller is reputable and insists it is unlocked. It's also a U1 model, and an IMEI lookup appears to show that it's unlocked. In connection settings under mobile networks, i'm also able to select multiple carriers, so I'm inclined to believe that the device really is unlocked.
Anybody here ever manage to solve this problem, or am I SOL? I would hate to be out 200 bucks on this phone since i'm past the return window.
Click to expand...
Click to collapse
esca91 said:
Hello everybody,
Could you share firmware of Sm-r900 ?
Thanls All for good work !
Bests regards.
Click to expand...
Click to collapse
mosaad627 said:
I am having same isuue with samsung not S20 ultra (SM-N986U1) I bought the mobile and its unlocked the seller send to me photo for the check screen and its open USA but can not use mobile data and make any calls when a make a call the call ended and give me screen call not sent
Click to expand...
Click to collapse
Yes, there is a solution, but only from an experienced professional 3rd party business, which means there's no free solution
Hey guys, really hoping someone is able to help me.
Back in September 2020 I purchased the SM-N9860 variant from T-Dimension for use in the UK on EE's network. Everything has been running smoothly since day one, up until yesterday (31st May) where the phone would constantly struggle for signal, flip flopping between "No service" or extremely slow 4g. If I try to make a call I get the "Not registered on Network" error message.
Since then I have done everything I can think of:
- Restarted the phone several times
- Switched Airplane mode on/off
- Manually selected my carrier
- Reset network settings
- Tried my sim in another phone (which worked fine), and tried a different sim in my Note 20 (exhibited the same behaviour of "No service")
- Checked IMEI but it's not been blacklisted
- Tried my sim in the SIM2 slot
- Full factory reset
but none of them made a difference.
Tonight I decided to try and flash different firmware to see if that might have any effect; both TGY and BRI firmwares were flashed successfully with Odin but neither have solved the problem. I'm now at the point where in my home I can see the 4g symbol appear above the network status for 30s - 1min but it never actually loads any data, before returning to "No service". Compared to my fiancee's S10+ which is also on the EE network and easily hits 20Mbps without worry in the exact same room.
Does anyone have any suggestions of what to try next? Has anyone else encountered this?
Thanks,
RBrNx
I've spent some more time investigating this and I am 99% sure it's an issue with the device.
Below you can see a screen recording of the issue that I made this morning while I was out a walk, you can see it goes from having signal but no internet ("Emergency calls only"), to "No service", then to 4g but I wasn't able to even load a website, before it moved back to "No service".
I've also attached two screenshots from the NetMonster app, one is from my Note 20 and the other is from my fiancee's S10+. Both were side by side when the screenshots were taken - mine has no service and her's has 4g.
I've since tried a number of other SIM cards in my phone, including another EE SIM and a Three SIM - both work immediately in the S10+, but neither are able to register when put into the Note 20.
I tried to contact Samsung Support but they were next to useless. The UK support team told me I'd need to contact Hong Kong support "as they have full access and information", but all the HK support could do was tell me to visit the HK Support Center...
I'd love to be able to fix this issue but I'm not sure what else to try
EDIT:
Some more information that I forgot to add - When I am out of the house I can occasionally receive calls/texts or use the internet, so I know for sure that they are all working (i.e EE haven't blocked my account) but most of the time I am stuck with "Not registered on network"
I'm wondering if it's an issue with the antennas, it's almost as if they are somehow weaker or less receptive than they were a few days ago
Does it behave this way when in safe mode ? How about in 3G mode? If it's hardware then Samsung doesn't recognize devices that are from other regions in relation to warranty work. You'll have to test the after sales support of T Dimensions now. Failing that sell it as is on eBay for parts or try and trade it for another device.
I'm using the same device on Vodafone UK and no issues here at all
I'm using an N9860 HK model, also from T-dimension, with EE since last autumn. I have not had any such problems with mine.
I haven't flashed or rooted the phone, but I have tinkered in the service menus in order to gain 5G service and possibly other service improvements.
Yeah, same for me. Changed the 5g whitelist settings but no root.
Hello everyone !
Before you read here is the specs and what I tried but didn't work to solve this issue :
Model : galaxy s5 (klte )
OS : Havoc OS 3.7 latest
Root : magisk21.1
Solutions I tried :
1 - restarted the phone .
2- clear factory reset and reinstalling the ROM.
3- checking my IMEI and its fine doesn't need repairs *#06#.
4- switched Sim cards and tested other Sim cards still no results .
5- return the official android OS still no use .
6- any other obvious solutions didn't work such as backup and restore my IMEI/EFS , airplane mod .
7- choosing network operator in the settings results a crash while searching so I can't choose manually and only be able to let it at automatic .
so lately I just bought a 4g Sim card and I know the galaxy s5 support 4g bands as I inserted the SIM it worked normally yet I wanted to switch the band to LTE so obviously I went to *#*#4636#*#* and switched bands so I can see which one would work yet suddenly while switching a couple of times the signal stopped showing and emergency calls only even though it reads the Sim card .
i tried to manually chose network operator but it crash's while it search's for it no matter what OS I install even in original so if anyone knows a command line to manually chose a network operator that would be appreciated.
Anyone know what to do ?
Gunnerpew said:
Hello everyone !
Before you read here is the specs and what I tried but didn't work to solve this issue :
Model : galaxy s5 (klte )
OS : Havoc OS 3.7 latest
Root : magisk21.1
Solutions I tried :
1 - restarted the phone .
2- clear factory reset and reinstalling the ROM.
3- checking my IMEI and its fine doesn't need repairs *#06#.
4- switched Sim cards and tested other Sim cards still no results .
5- return the official android OS still no use .
6- any other obvious solutions didn't work such as backup and restore my IMEI/EFS , airplane mod .
7- choosing network operator in the settings results a crash while searching so I can't choose manually and only be able to let it at automatic .
so lately I just bought a 4g Sim card and I know the galaxy s5 support 4g bands as I inserted the SIM it worked normally yet I wanted to switch the band to LTE so obviously I went to *#*#4636#*#* and switched bands so I can see which one would work yet suddenly while switching a couple of times the signal stopped showing and emergency calls only even though it reads the Sim card .
i tried to manually chose network operator but it crash's while it search's for it no matter what OS I install even in original so if anyone knows a command line to manually chose a network operator that would be appreciated.
Anyone know what to do ?
Click to expand...
Click to collapse
You may need to contact customer support for your carrier, they may have to fix it in their network.
Droidriven said:
You may need to contact customer support for your carrier, they may have to fix it in their network.
Click to expand...
Click to collapse
The thing is about my carrier that they have a terrible customer service in here as if it was almost non-existing so I'm left all alone to deal with the problem plus there aren't any customer service for Samsung or any other external fix center for smart phone that's why I had to learn things on my own.
Gunnerpew said:
The thing is about my carrier that they have a terrible customer service in here as if it was almost non-existing so I'm left all alone to deal with the problem plus there aren't any customer service for Samsung or any other external fix center for smart phone that's why I had to learn things on my own.
Click to expand...
Click to collapse
If you can't get back into that dialer menu and if flashing the firmware isn't fixing it and if booting into recovery and factory resetting the device aren't working, I'm not sure if there is anything you can do.
I noticed a few days ago that my phone (SM-S908E) had no service from my network provider (appears as "emergency calls only" or "no service").
The SIM and all its services works perfectly fine on any other device, and any SIM (from the same provider) gives me the same issue on the S22U, the network appears when try to manually select it, but never connects, it takes a lot of time and just a "Not Available" appears later.
I noticed later, while moving, I have perfectly fine signal sometimes, even 5G when available, I noticed this outside and near cellular towers.
My network provider says everything is fine on their side, the SIM and the device itself (well they only checked the SIM port). It make sense to me because I can get the service in my old S9 and S20 with that SIM.
My conclusion is that the device is not able to get the signal as before (like a range thing?), and because I don't know when it started but I know I updated an OTA on early feb (I noticed this issue on feb 5th), I want to ask you guys:
- Is there a chance the update was wrongly downloaded/installed and is affecting the mobile network?
- Can I redownload the update on any official way to reinstall it? I remember exactly that as a "repair" function on smart switch pc but is not availble on my device.
- Can I downgrade to my previous firmmware (with odin) to see if this was a update error, and if I can, that keeps the official status?
I have warranty yet, but I don't want to go to service center unless neccesary, and if I can try something and keep that official status before losing my device for a few days, that'd be nice