Database Info

[Q] Bars but Emergency Calls Only

First this only happens where I work in the basement where only certain providers (eg Verizon) have some signal in only part of the room. I did not get signal on AT&T or T-Mobile Pay as you Go down here.
I noticed especially after I flashed the new radio which gives me better service overall that I get phone signal down in the basement, but it is GPRS of Unknown Network and says emergency calls only. I get up to 3 bars. If I scan for available networks I get the name 31064.
Does anyone know what network that is or what is going on?

Anyone have any ideas? (I will take wild speculation as well)

i wouldn't be alarmed by it. I experience this at my office since I work in the basement...haha
It's possible your basement just won't read a signal like mine. install a window by your desk, maybe that'll help, but there shouldn't be anything wrong with your handset.

Sounds reasonable. I would agree with no problems with my handset. I do get better signal than my nokia e51, so maybe it's picking up a slight signal where the nokia could not.

From what I've noticed, my Nexus S acts this way whenever T-Mobile (my provider) does not have coverage wherever I am, but AT&T (not my provider) does. You can check this by going into "settings" -> "wireless & network settings" -> "mobile networks" -> "network operators" .....it will then search for & tell you what network has coverage where you are. Every time I've had bars & it says "emergency calls only" & I've checked the above, it's always been when I had coverage from AT&T but not T-Mobile.
Thus, it seems to me like an "enable roaming for emergency calls only" kinda thing.

Emergency calls only
ha ha....lol... i also have the same issue on my brand new i747M S3. im confused.
i try the all methods for resetting phone.
i noticed when im on long way, i dont know my handset is goning emergency calls only. but when im restsart phone its fine.
i do everything but not fixed it. firmware update, downgrade, rom change,and unroot. but not fixed, and also try factory reset the rom by falllowing the samsung secret code *#197328640# > UMTS>COMMON>NV REBUILD and restart and do again CDMA>COMMON>NEXTPAGE>REBUILD and restart., thhis is the code of full factory reset the rom and EFS. but not solve........
i change the hand set to international i9305 brandnew one. i used it 2 sady without issue.... day after morning when i wakeup, i see the massege,,,,emergency calls only,,im confused becouse this is a brandnew one...after i called the friend he also got the i9305. i asked about this issue. he said me he didnt face to this type of issue.. im confused he said me try sim change.. i do it... problem solved....:victory:
problem is the SIM card......i changed it to new one... and used i week no emergency calls issue... when im going to low signals areas.. its show no network and automaticallly change to the network....im very happy for fixing this problem.....:laugh::laugh::laugh:

[Q] LG Nexus 5 fails to recognize celullar network

Hello,
I have a Nexus 5 phone that came with Kitkat a few months back. The phone worked without issues until I decided to update to Lollipop 5.0 (OTA update) at the end of November. Initially the phone started to have troubles to detect the network at certain times - typically "playing" with the settings "Preferred network type" by changing from 4G to 2G, restarting, letting the phone detect the network on 2G mode and change back to 3G or 4G would fix the problem. The issue became more and more frequent until a point where i can not change the "Preferred network type" from 4G to any other type (as if it is "glued" on that setting). At this point my phone does not recognize at all the cellular network but It does seem to recognize the SIM card since i need to enter the 4 digit code to unlock SIM and it displays the network name, just no service.
I've researched the internet and I've tried several things but nothing seems to fix it such as restart mobile, change to airplane mode and back, take out and re-insert SIM card, request new SIM card from operator. The APN settings seem to be OK.
I've noticed that a new 5.1 version just came out and although I was not fully familiar with the process i decided to give it a try (after reading several instructions) and update manually (using factory images posted) and see if that would fix it. The phone is now with version 5.1 and still can't recognize the cellular network - no service. Everything else works fine, including Wi-Fi.
Has anyone experienced such issue after OTA update? The only odd thing I can think of is that I did the initial OTA update to 5.0 in US while i was on travel from Europe, but I can't say if this would in some way contribute to the issue. The mobile is D821 model.
Since I was stuck and mobile is within warranty period, I have sent it to service repair. I would be interested to know ideas of what could be the issue cause.
Sorry for long message, any help would be very much appreciated.
Pedro

[Not-Fixed] How to install new Z3 D6603 LTE on AT&T network

[Not Fixed] see bottom of this post.
It is fairly easy to install a new D6603 to work completly on the AT&T network. It is not so easy to find the answer of how to do it in the threads and posts. I tried many suggestions and wasted a lot of time. Hopefully this will save you from that fate.
First you must know that you can't use the IMEI number of your new phone if you want it to work completly as it should. If you use the Z3 IMEI you will have trouble with data of various sorts and the phone will go off line when on LTE after 20 or 30 minutes and you will not receive calls or SMS messages. I do not know why but it has been suggested that the AT&T network does not recognise this phone so it causes trouble.
If you have an AT&T nano-sim from your old phone then just put it in the phone. (Cut downs work but can cause other problems some say.) When the SIM is inserted for the first time into a new phone there is a prompt that asks if you want to download the APN. Hit 'yes' and the phone downloads the APN itself.
If it does not ask then go to Settings>More>Mobile Networks>Prefered Network Type and be sure LTE (Preferred) is selected. Then connect your phone to the internet and then go to Settings>More>Internet Settings and select AT&T. You should be good to go.
If you need to get a nano-sim then go to the AT&T store or call and they will give you one or send you one for free. You will need to use the IMEI number from a LTE phone that is already on the AT&T system. You can use your old phone or borrow the number from someone. If the rep installs the sim in the Z3 with the 6603 IMEI don't worry. Just call support later and tell them you sent your new phone back and want to go back to your old IMEI or have a new IMEI (from an existing AT&T phone). They will enter it and off you go. The phone from the IMEI will show in the picture on your account page. Big deal!
Update: This worked for hours last night but this morning it is back to not receiving calls. Simply turning wifi off and it began to receive calls as GPRS was switched back on. My wifi was on which has been said to cause problems. I will test with wifi off and report back. Had "no service" instead of AT&T on upper left of lock screen. A full shut down for several minutes than re-boot solved that.

YMMV. I've been on ATT with a Z3 purchased from Sony store for several months and it was registered in an ATT store by scanning the IMEI off the box followed by updating Internet settings in Setup. ATT online shows unknown model but everything works including LTE and MMS. There is something else involved when problems like this occur probably some setting not getting reset. I registered the Z3 on a new line with a new Sim card because I wanted to take my time moving stuff off my old phone--this may have avoided the problems.

JudH said:
YMMV. I've been on ATT with a Z3 purchased from Sony store for several months and it was registered in an ATT store by scanning the IMEI off the box followed by updating Internet settings in Setup. ATT online shows unknown model but everything works including LTE and MMS. There is something else involved when problems like this occur probably some setting not getting reset. I registered the Z3 on a new line with a new Sim card because I wanted to take my time moving stuff off my old phone--this may have avoided the problems.
Click to expand...
Click to collapse
I've also had no problems with my Z3 on AT&T. Works great, receives sms/mms immediately, etc..

esheesle said:
I've also had no problems with my Z3 on AT&T. Works great, receives sms/mms immediately, etc..
Click to expand...
Click to collapse
AT&T's system sometimes takes a while to get updated with new IMEIs that trigger LTE provisioning for a users' account.
Once your account is provisioned for LTE you never have to worry about it again, but sometimes if you have a phone the system doesn't recognize, it is a pain to get AT&T to properly provision your account. Supposedly properly trained in-store reps can do it - the key being "properly trained" - Never try to do anything "unusual" by calling AT&T customer service, and NEVER use a franchise/kiosk in-person for service - make sure you're at a corporate-owned store! Even then, some stores might have incompetent staff. I've been lucky that all of my local corporate stores are pretty well staffed.

So you are saying that your Z3's with wifi and LTE on with AT&T are working as they should?
With LTE off my phone responds normally with wifi on. With LTE and wifi on it will not respond to calls after a 30 minute sleep. It does not show missed calls. Calls go straight to voice mail after 2 rings. Could you tell me what level your LTE dBm's are? Thanks!

I was told not to give them my imie# but, after recvng the minisim I had to call them in order to 'provision' it to work at all and they needed that #. I have never had any problems personally and am assuming this may be because you gave them the wrong #. Again I am only guessing. Oth, if I had had a different imie to give, I would have done so myself.

It is very strange and I am feeling it is more signal strength related than how you provision your phone. (Once it is provisioned correctly.) It seems that more people have less problems when they already have a nano-sim and just plunk it in the new phone. This might indicate that they already had a strong signal from the get go. My old HTC One + get's a better signal than the Sony in the same locations with the same (new) SIM. With the Devilcase bumper on it gets 5% less. My very limited tests yesterday seemed to indicate that it was signal strength related. I am not enough of a conspiracy theorist to imagine that AT&T would program their system to not function correctly with sims that are provisioned with these Sony phones which they are obviously ignoring for some reason. Or am I?

I had all kinds of problems with the Z3 on AT&T. The IMEI caused an issue since AT&T linked it to a flip phone and therefore couldn't provision LTE. I changed it to an old AT&T LTE device and then I was able to get LTE but was having the same issue with calls going directly to voicemail and texts showing up hours later in bunches. I found the solution was to switch off LTE in the quick settings menu. All calls and texts came through and on time while LTE was off. If I needed a data boost to stream, I turned it back on until I was finished streaming. This was while on KitKat. After upgrading to Lollipop, I was able to keep LTE turned on and calls and texts still arrived on time.

I use data rarely. Mostly wifi. If I don't leave LTE on, my phone reverts to wcdma preferred. And why can't LTE just work without me having to constantly turn it back on? What bugs me is having the APN settings greyed out. I want to be able to turn it off. If anything it seems the phone itself is preventing me from accessing the sim. It feels like I'm borrowing something which contains lots of MY private data. I know my phonebook is stored locally but I also noticed there is no option of specifying the sim or not. Anybody know how to switch APN on and off? In fact, overall even rooted, I still feel like I have almost no power over it. I can't even disable the cellular connection without going full on airplane mode and I do not trust that. I don't even fly so that needs work for sure. Dumb question but could I buy a working nanosim from say 7-eleven that my apn switch will work with?

"Anybody know how to switch APN on and off?"
On my Z3 on OTA stock Lollypop I have an icon in quick settings to turn LTE on and off. Drag two fingers down from the top of the screen. If no LTE icon then select the pencil icon at the top and select the LTE icon. There is also a mobile data icon switch there.
To turn off your radio completly you can get the Advanced Signal Status app and select additional info at the bottom and click phone information and turn off radio. Probably a number of ways to do it but that is one.
Sim contact storage was a way to move information from phone to phone. You can still do it but not really necessary with cloud backup and storage. Google does it for me without me having to do anything which I like. I still save contacts to the sim just because I can. Export and import in your contacts app menu.

johnboatcat said:
So you are saying that your Z3's with wifi and LTE on with AT&T are working as they should?
With LTE off my phone responds normally with wifi on. With LTE and wifi on it will not respond to calls after a 30 minute sleep. It does not show missed calls. Calls go straight to voice mail after 2 rings. Could you tell me what level your LTE dBm's are? Thanks!
Click to expand...
Click to collapse
Works fine here. I don't pay attention to the dBm estimates since these aren't measured with calibrated test equipment and vary widely. Those numbers are basically worthless.
The only valid comparison is data performance in a given environment (ideally a difficult weak-signal one) - and at my desk with very weak signal, every phone I've ever used performs similarly to the Z3.

"Those numbers are basically worthless."
True, but we have narrowed this down to the possibility that it might be signal related so it is worth a shot. If people whose phones are working fine would measure the LTE dBm on Advanced Signal Status at the location where their phone sits and works well the most we might possibly see some measure of difference in the phones that are not working. Most of the non-working phones seem to work sometimes so signal strength is the next best parameter to rule out. Thanks!
Here are the screen shots of my phone with LTE on, LTE and wi-fi and LTE off and wi-fi.
How do the working phones compare? Does your CDMA (voice) also go to 0% when LTE is on and GSM = n/a?

Thanks. I think adv sig nfo actually works. I'm amazed actually. I can't find the phone's native greyed out apn switch anyways which really makes no sense.

SM-N9860 - "Not registered on Network" error suddenly in the UK

Hey guys, really hoping someone is able to help me.
Back in September 2020 I purchased the SM-N9860 variant from T-Dimension for use in the UK on EE's network. Everything has been running smoothly since day one, up until yesterday (31st May) where the phone would constantly struggle for signal, flip flopping between "No service" or extremely slow 4g. If I try to make a call I get the "Not registered on Network" error message.
Since then I have done everything I can think of:
- Restarted the phone several times
- Switched Airplane mode on/off
- Manually selected my carrier
- Reset network settings
- Tried my sim in another phone (which worked fine), and tried a different sim in my Note 20 (exhibited the same behaviour of "No service")
- Checked IMEI but it's not been blacklisted
- Tried my sim in the SIM2 slot
- Full factory reset
but none of them made a difference.
Tonight I decided to try and flash different firmware to see if that might have any effect; both TGY and BRI firmwares were flashed successfully with Odin but neither have solved the problem. I'm now at the point where in my home I can see the 4g symbol appear above the network status for 30s - 1min but it never actually loads any data, before returning to "No service". Compared to my fiancee's S10+ which is also on the EE network and easily hits 20Mbps without worry in the exact same room.
Does anyone have any suggestions of what to try next? Has anyone else encountered this?
Thanks,
RBrNx

I've spent some more time investigating this and I am 99% sure it's an issue with the device.
Below you can see a screen recording of the issue that I made this morning while I was out a walk, you can see it goes from having signal but no internet ("Emergency calls only"), to "No service", then to 4g but I wasn't able to even load a website, before it moved back to "No service".
I've also attached two screenshots from the NetMonster app, one is from my Note 20 and the other is from my fiancee's S10+. Both were side by side when the screenshots were taken - mine has no service and her's has 4g.
I've since tried a number of other SIM cards in my phone, including another EE SIM and a Three SIM - both work immediately in the S10+, but neither are able to register when put into the Note 20.
I tried to contact Samsung Support but they were next to useless. The UK support team told me I'd need to contact Hong Kong support "as they have full access and information", but all the HK support could do was tell me to visit the HK Support Center...
I'd love to be able to fix this issue but I'm not sure what else to try
EDIT:
Some more information that I forgot to add - When I am out of the house I can occasionally receive calls/texts or use the internet, so I know for sure that they are all working (i.e EE haven't blocked my account) but most of the time I am stuck with "Not registered on network"
I'm wondering if it's an issue with the antennas, it's almost as if they are somehow weaker or less receptive than they were a few days ago

Does it behave this way when in safe mode ? How about in 3G mode? If it's hardware then Samsung doesn't recognize devices that are from other regions in relation to warranty work. You'll have to test the after sales support of T Dimensions now. Failing that sell it as is on eBay for parts or try and trade it for another device.

I'm using the same device on Vodafone UK and no issues here at all

I'm using an N9860 HK model, also from T-dimension, with EE since last autumn. I have not had any such problems with mine.
I haven't flashed or rooted the phone, but I have tinkered in the service menus in order to gain 5G service and possibly other service improvements.

Yeah, same for me. Changed the 5g whitelist settings but no root.

Question Samsung A32 5G - SM-A326B/DS, does not connect to the cellular network

I have owned the Samsung A32 5G for about a year, SM-A326B/DS model.
For about a month, with my sim cards and with any SIM card I have tried, even of various telephone operators, the phone recognizes the signal only for a few moments, about a couple of seconds (and in those 2 seconds any SMS also arrive ), then the word "registration to the network" appears and since that moment the signal bars go to zero, as if the SIM was not present, or as if the SIM has expired (I can only make emergency calls), and therefore the phone is "without signal", therefore no SMS coming etc.
I tried various SIMs and various telephone operators, the same problem, with both SIM slots.
The phone has the latest official update:
One UI 5.0
Android 13
Build TP1A.220624.014.A326BXXU4CVK5
The phone has not undergone impacts or water, it is perfectly intact, it seems "new".
What could be the reason for this malfunction?
Is there anything that would be possible to try to solve the problem?
Thanks in advance for the suggestions